Get complete information related to latest Marble Stone Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Marble Stone Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Marble Stone Tenders.
Tender For name of work pay and use jsc (revenue) sub head - repair work of jsc ( flooring tile, wall tile, plaster, marble chips, sewer line component like manhole, cleaning of sewer line etc. ) at kamala nehru camp, kirtinagr, in motinagar ac-25,
Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc
Tender For tender for supply of ship model along side the drive way to the netaji subhas chandra bose international airport kolkata - soil investigation , design , drawing & detailing as mentioned below - a. ga drawing for ship model alongwith civil structure as per appendix-1&2 of sotr , dismantaling all types of masonry excepting cement concrete plain or reinforced , stacking serviceable materials at site and removing rubbish as directed within grse as per sotr and appendix-2 of sotr. , dismantling all types of plain cement concrete works , stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m as per sotr and appendix-2 of sotr. , dismantling r.c. floor , roof , beams etc. including cutting rods and removing rubbish as directed including stacking of steel bars as per sotr and appendix-1& 2 of sotr. , surface dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed as per sotr and appendix-2 of sotr. , earth work in excavation including cleaning away vegetation , surbs , etc. as per sotr and appendix-2 of sotr. , earth work in filling in foundation trenches or plinth with good earth , in layers not exceeding 150 mm. including watering and ramming etc. as per sotr and appendix-2 of sotr , filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water , ramming complete including the cost of supply of sand as per sotr and appendix-2 of sotr. , suplying and laying single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand as per sotr and appendix-2 of sotr. , ordinary cement concrete (mix 1 2 4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement , if any , in gound floor as per relevant is codes. pakur variety , providing m30 grade reinforced cement concrete as per is 456 with coarse aggregate of size 20 mm downgraded in columns , lintels , chajjas , canopies , staircase slabs , walls , coping , pipe encasement , floor slab , roof slab etc. at all levels as per sotr and appendix-2 of sotr. , supplying tor steel reinforcement (of approved manufacturer) of tested quality of any diameter upto 32mm dia fe 500 confirming to is 1786 as per sotr and appendix-2 of sotr. , hire and labour charges for waterproof steel/plyboard shuttering of any shape as per sotr and appendix-2 of sotr. , stamp concrete as mentioned in sotr and appendix-2 of sotr. , supplying ready mixed steel fibre( steel fibre dosage-20 kg per cum) concrete of m 30 grade with well graded stone chips of 20 mm nominal size as per sotr and appendix-2 of sotr. , supplying , fitting & fixing granite tiles 10mm to 12mm. thick in columns , wall , facia etc. with 15 thick (avg) cement mortar (1 2) including making suitable arrangements to hold the stones properly by brass or copper hooks including pointing in cement mortar as per sotr and appendix-2 of sotr. , supplying , fitting and fixing marble slab/tile of 15 to 18 mm thickness in floor , lobby , stair , landing & treads etc. over 20 mm (av.) thck base of cement mortar (1 2) laid with white cement slurry at the rate 4.4 kg/sq.m as per sotr and appendix-2 of sotr. , supplying , fitting and fixing 20 mm. to 37.5 mm. thick chunar / mirzapur / dholpur slab in floor set in 20 mm thick (avg) cement mortar (1 4) bed and pointing in cement mortar (1 2) (1 cement 2 marble dust) with admixture of pigment matching the stone shade , polishing all complete as per sotr and appendix-2 of sotr. , applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturers specified time as per manufacturers specification. (0.4 kg / sqm of concrete surface). , providing and inserting nipples with approved fixing compound after drilling
Tender For matarial supply for nrega scheme and other - p.p.c., white cement, fine prechiger, rail/gravel, gravel local, ballast stone brick for other than road work, 400mm measurement hand broken sit boids cart 1/11), 400mm stone broken boids cart 1/11, amin stone broken boids cart 12/10/6 tikesher, samyo for road work, 63-40mm stone broken boids cart 1/11, 63-40mm hand broken stone road boil cut 1/11, 90-45mm. hand broken stone aggregate, kori ravish boyce cart 1/6), yevla boids cut 1/6), binding samayi 14-6) (dal cut 1/, brick (22.5117.50 cm), first class (stassi, second class, solin khareja chilai stone, masonry bera (, masonry ratha (chi, baranja soling (for digging work upto 15cm height), baranja soling (for road paving work 23cm height), arch width of sheet 10-12 length 2-3 morai 2.5-357, stone sheet (flaky materia(3-4" thick & length, 1-2" width, sandstina dpc, sl, coping lintel, tand almira et, 250mm thickness upto 25-40mm thickness, upto 40-50mm thickness, upto 2300 sq. cm, polished kota stone one side side, upto 1000 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marblestone carving mirror 20mm thick, upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble chips, marble powder, marblestone (rajasthani 20mm thick), upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, stone grate, single pail 100 x 75 mm, double pail 125 x 75 mm., stone pail, upto 1.5 m length, minimum 40mm thick , 1.5 m to 2.40 m length, minimum 50mm thick , 2.4 m to 3.0 m length, minimum 65mm thick , above 3.0 in length, minimum 75mm thick , precast tiles/rocks , glazed su-30x45 cm , verified size-60x60 cm , interlock tiles/b rick/block for road work , cement interlocking block m-30grade, 80mm thick , fittings with local cash. for doors, windows and furniture), others / teak, factory made doors (30 mm thick, solid and single sheet), structural steel, iron (tor steel fo-415/500 for reinforcement, widing via 18 gauge, iron girders, conia iron square green/leaf angle aman, jage wine and 14 quaestrad/34 jani, barbed iron lar size 12 guage wire and 12 guage strad/12, iron mesh (24 gauge, 14 mesh, module gi box, 2 for soil, 3 for module, module base and cover plate, 2 for module, 3 for module, modular swaying in, 15 marked, sp 5/6 ampere, sp 15/16 ampere, modular circuit outlet, marked, 6 pin 15/16 amp, steel fastener 5 mm 75 mm, scb db, 2+2 way, spn, single door, 2-4 in, spn, single door, 2+6 in, spn, single door, gi pipe (medium thickness., 15.00 mm dia, 40.00 mm dia, copper wire 8 swg (4.00 mm dia) (0.117 kya/m), ci/ms cover plate attached to frame with locking arrangement, pvc water tank body cover (as per 15:12701-1989, diesel road roller 8 to 10 ton, tractor (25-40 hp), tractor trolley, tractor water tanker samta 4000 liter weight, cement ket mixer 5-7 cubic feet, pumping set 15 hp, niddle/plate better mm operator, -grinding machine with operator big, motor i.e.), compressor, hydraulic excavater/cb (bucket capacity 0.4cum), scraper, shuttering ply with beam and other material, shuttering ply with batti and other material, shuttering nohe plate with batti and other material