Latest marine epoxy Tenders | Government marine epoxy Tenders

CTN :40521848

09 Jun, 2025 NA

Delhi - Delhi

Tender For repair, maintenance, and installation of plant/ systems/equipments (version 2) - office space; supply installation commissioning of equipments and devices for storage; buyer-providing compactors made out of 0.8mm thick crca steel conforming to is: 513 gr. d each unit have 4 loading levels formed by 3 nos . adjustable shelves . body units are bolted to under carriage . optimizer height form ground is 2080 mm (1980 body + 65 undercarriage +35 channel system) the body i /c shelves are given antirust surface treatment & are powder coated with epoxy polyester powder. it involves treatment consisting of hot water rinse. knock of degreasing, cold-water rinse, phosphating ,cold water rinse , passivation & dry off oven treatment. final finish consists of epoxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns . the testing of paint is done for various physical & chemical properties as per is: 101. the material is the oven backed with a controlled temperature of 180 deg. c . to 200 deg . c. it is made of 0.8 mm thick crca steel conforming is is : 513 gr . d or dd its max load bearing capacity is 80 kg uniformly distributed per shelves are mounted on support bracket & shelf level can be adjusted at approx. 25.4 pitch . there are 3 adjustable shelves per body given per body given 4 loading levels , if bi cradle pair is provided the under carrying is a welded frame made of hr sheet 3.15 mm thick conforming to is : 10748 suitably fabricated to take the loads based on configuration . a centralized locking arrangement is provided through locking stiffener mounted on to back of single last unit so that it gets locked on channels when all the units are brought together. 10 bodies.

corporations/Associations/Others

CTN :40526790

11 Jun, 2025 NA

Pune - Maharashtra

Tender For repairs and strengthening of rcc structure by applying component solvent free epoxy primer and applying polymer nafufill treatment at chikalthana pump house.

corporations/Associations/Others

CTN :40559842

14 Jun, 2025 NA

Tuticorin - Tamil Nadu

Tender For providing protective epoxy treatment to the concrete surfaces of the hot water out fall structures

Central Government / Public Sector

CTN :40441016

05 Jun, 2025 1.11 Crore

Haldia - West Bengal

Tender For custom bid for services - 9040c25b52 annual repair contract for process scheme jobs in instrumentation department on open tender basis- equipment hiring charges - 1 hydra 10t (hired) 4640, 2 hydra 15t (iocl owned) 4944, 3 hydra 25t (hired) 5551, 4 crane 50t (hired) 10785, 5 crane 75t (hired) 10785, 6 forklift ( iocl owned) 1738, 7 180t crane (hired) 18296, 8 articulated boom (hired) 2208, 9 tractor and trailer (hired) 2076, supply of materials for secured advance- civil items: a. items against which secured advance can be granted :, 1. bricks, 2. stone and brick aggregates, 3. stones, 4. finished products of brass, iron or steel such as doors and window frames,, wiremesh, gate, gi sheets., 5. pre-cast rcc products such as pipes & fittings, jail, water storage tanks., 6. doors and windows fittings., 7. pipes and sanitary fittings of gi, ci, sci and hci., 8. metallic doors / windows., 9. ms gratings., 10. reinforcement bars., 11. hydraulic door closers., 12. structural steel., 13. flushing cisterns., 14. ci valves, sluice gates etc., 15. fencing materials chain-link / barbed-wire etc., 16. anchor bolts., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. kitchen sink china vitreous, flush back for wash basin vitreous china water closet, and pedestal type water closet vitreous china, urinals., 2. glazed tiles, terrazo tiles and similar articles., 3. marble slabs., 4. asbestos cement products., 5. finished timber products such as doors, windows, flush doors, particle boards, (subject to the mandatory tests being satisfactory)., 6. bitumen in sealed drums., 7. bitumen felt., 8. polythene pipes & fittings, sanitary fittings and pipes of sw, porcelain and, chinaware materials., 9. laminated / safety one way vision and bullet proof glasses., 10. chemicals required for anti-termite treatment (in sealed drums)., 11. paints, varnishes, distempers, pigment, spirit., 12. cement tiles., 13. acid proof tiles., 14. bitumen products required for mastic flooring etc., 15. water proofing compound such as cico etc., 16. materials for epoxy finishing etc., electrical items, a. items against which secured advance can be granted :, 1. steel conduit, 2. gi pipes, 3. ci boxes, 4. ic boards., 5. switchgears (air circuit breakers and air break switches), 6. a c s r conductors, 7. a.c. plant & machinery., 8. pumps, 9. generating sets (without oil), 10. gi strips., 11. street light poles (steel), 12. cable trays., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. transformers, 2. switch gears ( oil filled), 3. lt & ht cables, 4. fans, 5. store & dry batteries, 6. insulation tapes., 7. epoxy cable compounds., 8. electric light fittings., 9. wood battens, casing & capping and wooden boards., 10. flexible wires., 11. pvc materials, 12. rubber materials, 13. glass wools, thermocol and other insulating materials., 14. porcelain ht and lt insulators., 15. electric heat tracing tapes., mechanical items, a. items against which secured advance can be granted :, 1. structural steel., 2. plates., 3. pumps / motors, vessels etc., diesel engine, side entry mixers, suction heaters &, any other mechanical equipment., 4. refractory bricks., 5. ss foil., 6. pipes / pipe fittings., 7. gratings., 8. valves, hydrants, monitors., 9. aluminium sheet., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. bitumen, 2. wrapping & coating material, 3. primer / paint, 4. foam / foam seal material, 5. guniting material, 6. insulation & refractory materials other than bricks., instrumentation items, a. items against which secured advance can be granted :, 1. structural steel, 2. ms sheet / gi sheet, 3. pre-fabricated trays, 4. pipes / tubes / fittings, b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. ss / copper tube

Central Government/Public Sector

CTN :40434732

14 Jun, 2025 40.00 Lacs

Kishangarh - Rajasthan

Tender For supply of lab furniture of central instrumentation facility, central university of rajasthan - wall mount cabinets with metal door, sefa-8 standards heavy duty wall mount cabinets: sefa-8 standards heavy duty cabinet body shall be in 1.2mm thick material of construction: 1.2 mm gi sheet with ss 304 hinges and handles. epoxy powder coating of 60 -80 microns. - size - 600mmlx450mmdx750mmh. provison of lock is required. these units will be fitted in the service areas of the drawing., under bench storage units (qty as per drawing)sefa-8 standards heavy duty under cabinets & drawers: sefa-8 standards heavy duty under module (cabinet body shall be in 1.2mm thick and drawer front & shutter shall be in 1 mm thick), the cabinet should have adjustable height shelf. the storage cabinets should be made of crca 20 gauge. (tata/ jindal/sail/jsw in panel construction. cabinets should have sandwitched doors & drawers filled with pcapsal sheet should be lined on the edges of doors and drawers for sound deadning. the cabinets should be interconnected with spacer which strengthens over all structure of the table / bench. ss fasteners should be used at exposed area inside the cabinets.. the drawer glides should be telescopic glides which gives strength with smooth movebase cabinet of 600 mm with 1 drawer & 2 shutter with lockbase cabinet 750mm with 1 drawer & 2 shutter with lockbase cabinet 900w 1 drawer & 1 shutter with lockbase cabinet 450mm 1 drawer & 1 shutter with lock, modular sink unit ( corner unit )specification of material of construction is same as under cabinets. the front panel should have single door with handle. sink bowl and bottle trap should be of polypropylene. one way ss faucet., filler panels (qty as per drawing)specification of material of construction is same as under cabinets., frame assembly for wall cabinet bench (qty as per drawing)material:steel tubing, of hollow sections conforming to standards is code:square pipe with a cross-section of 30mm x 30mm and a minimum thickness of 1.2 to1,6 mm. finish: powder coating: highly corrosion-resistant epoxy powder coating, typically 60-80 microns thick,, with pre-treatment for better adhesion. .legs:adjustable levelling feet: required for uneven flooring, typically with a tolerance of -5mm to +20mm., 17mm (+/-1) thick black granite (qty as per drawing), garment locker1000mmlx450mmdx2100mmh, made of ss 304, thickness of sheet is 1.2 mm and finish is matt. total 9nos. of lockers of equal size is required with provision of lock., shoe rack 1200mmlx300mmdx600mmh - two tier ss 304 shoe rack. made of 30mmx30mmx1.2mm pipe., hardware fittingsa) hinges :- hettich/haffele/godrej.b) handle :- ss304 matt finish d handle / aluminium flush handle.c) screw :- all s.s. 304 visible screws.d) lock :- hafele / hettich / godrej make with pair of keys. e) drawer channel :- hettich / ebco / haffele make telescopic drawer slides 45kgs

Central Government/Public Sector

CTN :39866015

02 Jun, 2025 35.00 Lacs

Karwar - Karnataka

Tender For corrigendum : repairs to pvc / epoxy flooring including wall panelling pu treatment and certain miscellaneous work in otm accn magazines in site e and c at naval base karwar

CTN :40278846

23 May, 2025 1.80 Crore

Raipur - Chhattisgarh

Tender For protection work of weir (epoxy treatment) in head work of rajiv samoda nisda diversion scheme (phase i), block-arang, district-raipur

State Government

CTN :40346369

11 Jun, 2025 4.11 Crore

Dadra - Gujarat

Tender For underwater treatment of u/s surface by epoxy putty and epoxy base grout materials of damanganga reservoir project.

Central Government/Public Sector

CTN :40094352

22 May, 2025 NA

Mumbai - Maharashtra

Tender For supply of head stock beam to icf drg. no. icf/std-1-2-002, alt. m/nil, item no.10, with material to specn. is: 2062-2011, amnd.-1 of nov. 2012 e 250 cu quality 'c'. note: - surface treatment (includ ing epoxy primer) on entire item shall be as specified in note - 4 & 5 of icf drg. no. - icf/std-1-2-001, alt. - 1/5 [ warranty period: 30 months after the date of delivery ]

Marine Epoxy Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector