Latest marine ply Tenders | Government marine ply Tenders

corporations/Associations/Others

CTN :45675269

04 Jul, 2026 NA

Surat - Gujarat

Tender For supply and installation work of new push back seats, new floor carpet and polishing of side surface marine ply pattas and installation of new cctv system and as per required other work in the planetarium for the purpose of the upgradation of the planetarium of the science centre located on city light road managed by surat municipal corporation, surat. (3rd attempt)

State Government

CTN :45688520

16 Jul, 2026 NA

Diglipur - Andaman And Nicobar Islands

Tender For supply of ordinary portland cement opc , natural river sand , pulverised stone dust , crushed stone aggregate , exterior grade acrylic weatherproof wall paint , oil based wood primer , cement primer , synthetic enamel paint , aluminium sliding door tower bolt , aluminium tower bolt , aluminium handle , mild steel pressed butt hinge , ceramic glazed floor tile , chequered terrazzo tile , hollow concrete cement block , clear float glass pane 5.5 mm thickness , mild steel casement stay straight peg type , cement fibre board 6 mm thickness , paint brush , pre-painted galvanized iron roofing sheet , mild steel wire nails , galvanized iron level adjusting hanger , self drilling screw , marine plywood 12 mm , mild steel flat , white portland cement , semi circular plain gs sheet gutter with gi nuts bolts and washer , plain ridge cap ppgi or galvanized steel sheet , tmt reinforcement steel bar , binding wire , mild steel l-angle , mild steel t-angle , industrial grade solvent thinner * /bid number : gem/2026/b/7712155 + /dated: 25-06-2026 ' ' / bid document 1 / 35

State Government

CTN :45657000

14 Jul, 2026 NA

Diglipur - Andaman And Nicobar Islands

Tender For supply of ordinary portland cement , river sand , pulverised sand , crushed hard stone aggregate , cement concrete hollow block , synthetic enamel paint , waterproofing cement paint , cement primer , paint thinner , paint brush , ms rod , gi binding wire , marine plywood , wire nails * /bid number : gem/2026/b/7699931 + /dated: 23-06-2026 ' ' / bid document 1 / 20

Central Government/Public Sector

CTN :45595256

22 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of paneling items for orv sagar kanya - perforated sheets 8x4 feet, thickness 1.5 mm, gi sheets 8x4 feet, thickness 1.5 mm, box channels 12 feet, 40x20 mm thickness 2 mm, box channels 12 feet, gi 40x40 mm thickness 2 mm, gi u-channels 8 feet, 12 x12 mm x50 mm as per sample, 19 mm thickness marine plywood with glazed white sunmica lamination on oneside (size : 8x4), 8 feet channels, 28x25x40 mm as per sample, ceiling channels 8 feet, 30x35x30 mm as per sample, port hole wooden plate made with 12mm plywood laminated with sunmica layer on one side with necessary cuts(aps), ms l bend 50 x 200mm beads 3mm thick and width 75 mm, gum tape (rubber type) , both side gum (bundle), marine fevicol gum, marine plywood with glaze with white sun mika 8x4 feet, 6mm thickness, marine plywood with glaze with white sun mika 8x4 feet, 12mm thickness, ms l bend 50 x 320mm beads 3mm thick and width 75 mm, tarpaulin waterproof 250 gsm 8x10 meters - perforated sheets 8x4 feet, thickness 1.5 mm, gi sheets 8x4 feet, thickness 1.5 mm, box channels 12 feet, 40x20 mm thickness 2 mm, box channels 12 feet, gi 40x40 mm thickness 2 mm, gi u-channels 8 feet, 12 x12 mm x50 mm as per sample, 19 mm thickness marine plywood with glazed white sunmica lamination on oneside (size : 8x4), 8 feet channels, 28x25x40 mm as per sample, ceiling channels 8 feet, 30x35x30 mm as per sample, port hole wooden plate made with 12mm plywood laminated with sunmica layer on one side with necessary cuts(aps), ms l bend 50 x 200mm beads 3mm thick and width 75 mm, gum tape (rubber type) , both side gum (bundle), marine fevicol gum, marine plywood with glaze with white sun mika 8x4 feet, 6mm thickness, marine plywood with glaze with white sun mika 8x4 feet, 12mm thickness, ms l bend 50 x 320mm beads 3mm thick and width 75 mm, tarpaulin waterproof 250 gsm 8x10 meters

CTN :45553087

23 Jun, 2026 13.99 Lacs

Pathanamthitta - Kerala

Tender For work name :ridf xxvii- providing and installing furnitures at smart krishibhavan in mezhuveli in pathanamthitta district (retender) - basement floor- ecoshop,seedling storage and bio pharmacy, visitors chair 3 seater - perforated sheet visitors chair - ss-godrej/featherlite / equivalent quality class, corner stand:- by using good quality marine plywood with mica finish of size - 90x30x90cm, window curtain:- by using good quality zebra blinds window curtain with all fitting accessories of size - 120x150cm, staff table: - by using good quality both side laminated particle board, drawer and cupboard , with sliding keyboard and file manager , provision for cpu/ups ,telescopic channel for drawers, hinges for cupboard, handle etc complete of table of size -150x120x75 cm, medium back revolving chair, hydraulic lift, cushion seat and back with arm rest, visitors chair:- on s type frame with cushioned seat and back, storage cupboard:-bottom storage cupboard with door by using good quality multiwood/plywood with mica finish , ss handle, of size - 2.5 x2.5x0.60, powdercoated steel shelf for keeping seeds, etc.., supermarket rack:- by using good quality marine plywood with mica finish with all fitting accessories of size - 210x150cm., sliding mesh:- by using good quality powder coated aluminium channel steel mesh , with all fitting accessories , of size - 280x60cm, storage cupboard:-bottom storage cupboard with door by using good quality multiwood / plywood with mica finish, ss handle, of size - 300x60x75cm, wall fan, ground floor- office and waiting area, visitors chair 3 seater - perforated sheet visitors chair - ss, corner stand:- by using good quality marine plywood with mica finish of size - 90x30x90cm, window curtain:- by using good quality zebra blinds window curtain with all fitting accessories of size - 120x150cm, staff table: - by using good quality both side laminated particle board, drawer and cupboard , with sliding keyboard and file manager , provision for cpu/ups ,telescopic channel for drawers, hinges for cupboard, handle etc complete of table of size -150x120x75 cm, computer table - by using good quality both side laminated particle board, drawer and cupboard , with sliding keyboard and file manager , provision for cpu/ups ,telescopic channel for drawers, hinges for cupboard, handle etc complete of table of size -150x120x75 cm, medium back revolving chair, hydraulic lift, cushion seat and back with arm rest, visitors chair:- on s type frame with cushioned seat and back-godrej/featherlite / equivalent quality class, storage cupboard:-bottom storage cupboard with door by using good quality multiwood/plywood with mica finish , ss handle, of size - 300 x60x75cm, supermarket rack:- by using good quality marine plywood with mica finish with all fitting accessories of size - 210x150cm., wall fan, gypsum ceiling : supply,conveyance ,installation of gypsum ceiling with material and labour charge etc complete of size 4.0x3.60, l type table: - by using good quality marine plywood with mica laminate finish and inside laminate finish, drawer and cupboard , telescopic channel for drawers, auto hinges for cupboard, steel handle etc complete of table of size -180x75x75cm and side table of size - 100x40x75cm, printer table: - by using good quality marine plywood with mica laminate finish complete size -100x60x75 cm, first floor- conference &training hall, gypsum ceiling : supply,conveyance ,installation of gypsum ceiling with material and labour charge etc complete of size 8x4.3, conference hall paneling:- wall panneling :- providing and placing a wall paneling on wall with decorative front view as per design and drawings using good quality 9mm/12mm marine plywood, supporting 16mm ply, with decorative lamination and all accessories etc completed .of size -2x8x2.1, dias stage:- providing and placing dias stage on conference hall, as per design and drawings using good quality marine ply wood including all fitting accessories etc. comple

CTN :45561860

29 Jun, 2026 60.15 Lacs

Ernakulam - Kerala

Tender For supply and installation of furniture - guest house, wardrobe: manufacturing and supplying wardrobe of size : 120w x50 d x225 h cm storage side and shelves are made up of 17mm a grade treated rubber wood fixed by 1 2 a j stainless steel hinges and handles necessary good quality hardware rate inclusive cost of material transportation loading and unloading changes labour charges etc.. smoothly finished with polyurethane materials, tv unit: manufacturing and supplying tv unit of size 140 x 120cm panel made of 17mm chemically treated rubber wood good quality fiuing accessories provision for switch board etc.. smoothly finish with polyurethane materials, cot: manufacturing and supplying cot of size: 152 w x 198 l x 35 h cm frame and all slats made by good quality teak wood bed with 9mm marine plywood smoothly finish by polishing two coats of polyurethane sealer and one coat of polyurethane top layer, side table: manufacturing and supplying side table of size: 60 x50 x 45 cm frame and slats made by good quality teak wood smoothly finish polyurethane sealer and polish materials, dressing table: manufacturing and supplying dressing table of size: 75 xl60 x60 cm and mirror unit of size: i 10 x 75 cm frame and slats made by good quality teak wood smoothly finish by polishing two coat of polyurethane sealer and one coat of polyurethane top layer, table: manufacturing and supplying table of size: 100 x60 x75 cm frame and slats made by good quality teak wood smoothly finish by polishing two coats of polyurethane sealer one coat of polyurethane top layer, ceiling: providing and fixing of frame work made of special sections and l22mm marine plywood and veneer provide necessary led panel light, head board: manufacturing and supplying head board for cot of size 245 x 120 cm frame made by 17mm a grade treated rubber wood smoothly finish by polishing two coats of polyurethane sealer and one coat of polyurethane top layer, wall cladding: providing and fixing wall cladding with 12 mm marine plywood and mica, wooden arm chair: manufacturing and supplying teak wood arm chair smoothly finish by polishing two coats polyurethane sealer and one coat polyurethane top layer, wooden teapoy: manufacturing and supplying teapoy of size : 70 x 45 x 50 cm frame and slats made by good quality teak wood smoothly finish with polishing, working chair: manufacturing and supplying teak wood working chair smoothly finished with polishing, suite room sofa: 3+ i manufacturing and supplying sofa 3 + 1 seater made by high density pu foam with teak wood frame smoothly finish with polishing, dining table: manufacturing and supplying dining table of size: 180 x 90 x75cm frame and slats made by good quality teak wood smoothing finish by polishing, dining chair: manufacturing and supplying teak wood dining chair smoothly finished with polishing, buffet table: manufacturing and supplying buffet table of size : 360x60x90 cm made by 16 mm bwp 710 grade marine plywood and mica top with good quality granite provide necessary shelves, living hall table :manufacturing supptying living hall table of size :270 x and 60 x 75 cm frame and slats made by good quality teak wood smoothly finish with polishing, sofa: manufacturing and supplying sofa made by high density pu foam and teak wood frame smoothly finish with polishing-3 seater, sofa: manufacturing and supplying sofa made by high density pu foam and teak wood frame smoothly finish with polishing-1 seater, gypsum ceiling: providing and fixing gypsum ceiling with gl section and gypsum panel board putty work and emulsion paint finish provide necessary led panel light, reception counter paneling: providing and fixing paneling with 12 mm marine plywood and colour mica, reception table: manufacturing supplying reception table of size:265 x and 100x 100 cm made by 16 mm bwp 710 grade marine plywood provide four drawer, side table: providing and fixing side table of size: l00x 40x75 cm made by 16 mm bwp 710 grade marine plywood, planter box 1

CTN :45084499

17 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For bid to ras supply of construction items rubble field c c - portland cement , coarse sand zone iii , stone aggregate single size 10 mm nominal size , stone aggregate single size 20 mm nominal size , fine sand zone iv , twisted steel deformed bars tmt 10 mm , common burnt clay f.p.s. non modular bricks class designation 7.5 , angle iron frame size 50x50x6mm , ms flat size 50x50x6mm , 12 mm thick marine plywood conforming to is 710 , mild steel sheets of 1.00 mm thickness for tanks , r.c.c. pipes np2 class 900 mm dia length 2.5 mtr

State Government

CTN :45501329

19 Jun, 2026 NA

Tiswadi - Goa

Tender For supply and installation of office furniture and cabinets - marine ply mound 19mm, 710 grate and 1 mm outside laminate, narolex inside .8 vincent

Central Government/Public Sector

CTN :45260267

17 Jun, 2026 15.76 Lacs

Gaya - Bihar

Tender For corrigendum : supply of 6 mm marine plywood 8x4 , 9 mm marine plywood 8x4 , 12 mm marine plywood 8x4 , 19 mm marine plywood 8x4 , 32 mm marine plywood 8x4 , 25 mm marine plywood 8x4 , 32 mm flush door 3.5x8 , 32 mm flush door 3.5x7 , 12 mm gypsum board 6x4 , 1.5 mm laminated sheet 8x4 , 1 mm edage band , door handle aluminium 6inch , door lock aluminium , tower bolt aluminium 6inch , tower bolt aluminium 8inch , fiber glass sheet 8x4 , mirror glass 18x36 , mirror glass 24x36 , mirror glass 12x36 , cloth hanger , towel rail , door handle hafele , tower bolt 12inchhafle , tower bolt 6inch hafle , door stopper , door closer , cylindrical door lock , door lock classic , drawer lock , wardrobe lock , pad lock 12 lever , ss hinges 6inch , ss hinges 5inch , ss hinges 4inch , ss l drop latch , l bihari kabjapanel hinge , silicon sealant , marine adhesive 50 kg , pro bond adhesive 25 l , heat proof adhesive 25 kg , instant adhesive , stone adhesion , glass putty , masking tape abro tape , double sided foamtape , pat bolt 1inch , pat bolt 1.5inch , wall fastener 8 , wall fastener 10 , wall fastener 12 , mirror bracket clamp , self drilling screw , nylon sleeve anchor gully 1inch , nylon sleeve anchor gully 1.5inch , nylon sleeve anchor gully 2inch ) /bid number : gem/2026/b/7534645 * /dated: 20-05-2026 & & / bid document 1 / 48

CTN :44855837

12 Jun, 2026 NA

Jalpaiguri - West Bengal

Tender For bid to ras supply of excavating in trenches n exc 1.5m wide as per scoope of work , m and l pcc type d2 using 40 mm graded stone as per scoope of work , returning filling in including spreading levelling as per scoope of work , m and l sand filling under floors or in foundations as per scoope of work , surface dressing n. exc 15 cm deep in soft loose soil as per scoope of work , m and l for stone hardcore of gauge as per scoope of work , m and l for 100 mm thick pccm as per scoope of work , m an l for prepolished chemically treated as per scope of work , m and l for brick works with fly ash bricks straight as per scope of work , m and l for brick works with fly ash bricks straight as per scoope of work , m and l for rcc nominal mix type b1 as per scoope of work , m and l for mild steel tmt bars 10mm dia and overas per scoope of work , formwork to sides and soffits of flooras per scoope of work , material and labour for vitrified ceramic joint free as per scoope of work , m and l for vitrified ceramic joint free tiles as per scoope of work , m and l for 15 to 18 mm thick granite as per scoope of work , m and l repair of 18mm thick marine ply laminatedas per scoope of work , m and l as in repair sheet glass 3 mm thick as per scoope of work , m and l for 12 mm thick ply gradei as per scoope of work , m and l 100 mm long stainless steel hinges as per scoope of work , m and l stainless steel c profile handle including as per scoope of work ) /bid number : gem/2026/b/7403889 * /dated: 11-04-2026 & & / bid document 1 / 22

Marine Ply Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector