Latest marking gauge Tenders | Government marking gauge Tenders

Central Government And Public Sector

CTN :45702517

06 Jul, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of others - total qty.= 19310.02 kgs., description: - scrap of abandoned height gauge structure i.e. estimated iron fittings(angle, ismb, ismc etc.). remarks - 1) after dismantling, all debris of condemned steel structure should be collected and removed from the site before effecting the delivery. 2) any type of hidden materials which is found during dismantling of building like rails angles, channels etc. should not be offered. the above iron materials must be handed over to concern sse/works/line/bsp store. 3) dismantling of the above structure will be done by the purchaser at his own cost and risk and without causing any loss to any railway property. purchaser will demolish and clear up to ground level only. while dismantling explosive should not be used. all the debris, unserviceable materials to be cleared from site to outside railway land by the purchaser. 4) any loss due to theft, accident etc. shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railway. 5) material to be sold on as is where is basis and should be delivered in weight.

Central Government/Public Sector

CTN :45637861

02 Jul, 2026 NA

Ratlam - Madhya Pradesh

Tender For auction sale of others - released, condemned and u/s miscellaneous ms scrap consisting, {angle, rail pieces, gi pipes off size, gi sheet, iron board (angle+gi sheet) scrap of old broken water tank, channel sec, fencing, tie bar, covershed, steel bar, tmt bar, round bar, beams, flate, height gauge, flush tank, h/pump body, c.i. pipes off size, door, fencing wire}, total qty- 35.00 mt, location- sse-works-nmh office, sse-works-nmh outside office & pump room back side. mode of delivery by actual weighment basis and on as is where is basis, custodian- sse-works-nmh, fdp-50 days. note- cutting is permitted for easy loading only not into small pieces.

Central Government/Public Sector

CTN :45637761

29 Jun, 2026 NA

Kota - Rajasthan

Tender For auction sale of others - pl no- 98050035 m.s. & scrap consisting of ms angle, channel bar, gi sheet, gi pipe off size, ms door, tiebar, bolt nut, rel. offsize rail pieces, tank plate, tiebar frame, jafari, broken tree guard, hand pump body & pipe, gi fitting, ismb & ismc of height gauge and attachments if any, etc. total qty.=50.02 mt. for stock holder sse/w/ggc. ss-11 no.-sse/w/ggc/scrap/2026-27/08 date 14.05.2026. ds-8 no.-875513 dt.08.05.2026. lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot. the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. all necessary safety precautions shall be strictly adhered to by the purchaser at their own risk and responsibility. the purchaser shall be solely and entirely responsible for any negligence or mishandling. delivery will be given by actual weight on government approved dharam kanta only. note-cutting may be allowed for easy loading at the time of delivery. the purchaser of the awarded lot are advised not to wait for last date of fdp considering the forthcoming mansoon season. all efforts should be made to lift the lot as early as possible.the material are lying in rajasthan state.

CTN :45036193

05 May, 2026 NA

Delhi - Delhi

Tender For expression of interest document for supply and delivery of school requisites 2026 for secondary schools (design and technology) - supply and delivery of school requisites 2026 for secondary schools (design & technology) - angle grinder, band saw, bench drilling machine, bench grinder, circular saw, compressor, spraygun, drilling machine (portable), extension cable, hot wire cutter, jig saw (portable), metal lathe, planer / thicknesser, router (portable), sander -orbital, soldering iron, strip heater, welding machine, wood working lathe, abrafile frame, adjustable spanner, adjustable spanner, anvil, bench hook*, bench shear (guillotine), bradawl, carpenters mallet, centre punch, centre square, chisels- mortice, chisels- mortice, chisels -bevelled edge, chisels -bevelled edge, chisels -bevelled edge, chisels- firmer, chisels- firmer, chisels- firmer, cold chisels, combination drill, combination pliers, coping, saws, corner clamps, countersunk bit, dividers, engineers square, engineers vice, forstner bit, g cramps, g cramps, hacksaw, hammer: ballpein, hammer: ballpein, hammer: ballpein, hammer claw, hammer cross pein, hand drill, hand files including handles, hand files including handles, hand files including handles, hand saws, hand saws, inside calipers, jack plane, jenny calipers, junior hacksaw, machine vice, marking gauge, marking knife, measuring tape, metalwork bench, mitre box, mole grip, nail punch, needle files, oil can, oil stone, outside calipers, pincers, pipe wrench, rasps, ring spanner, riveting machine kit, router bits, sash cramps, saw set, screw driver, screw driver, scriber, sliding bevel, smoothing plane, spanner - open ended, spirit level, spoke shave, spoke shave, steel rule, taps and dies, tenon saws, tinmans snip, tinmans snip, try square, v-block and clamp, vernier calliper, wire brush, woodwork bench, woodworkers bench vice, blackboard compasses, blackboard protractor, blackboard rule, blackboard set squares, design tables, isometric-grid blackboard*, square-grid blackboard*, whiteboard compasses, abrafile blades, coping saw blades, emery cloth, emery cloth, emery cloth, goggles, hacksaw blades, junior hacksaw blades, masks - respiratory, masks - dust, paint brush*, paint brush*, paint brush*, welding apron, welding gloves, welding rods.

CTN :44926927

27 Apr, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply and delivery of school requisites 2026 - angle grinder-grinding wheel, diameter 110 mm , power range, 750w to 2000w, 240v + key (eu), band saw-table size 400 x 548, mm, 900 w or 340 x 335 mm, 350, w 240 v + blade and sense (eu), bench drilling machine-13mm, chuck, 240v, minimum table size, 260 x 180 mm + chuck key (eu), bench grinder-minimum 250 w,, 240v, circular saw-minimum 1.5kw,, 240 v + fence and cross-cut guide, (eu) (table mounted), compressor -output 50l/min, 6, bar, 340 w + supply hose and clips, (eu), spraygun-0.7 mm nozzle, diameter, 800 cl capacity (approx), (0.7 mm - 1.4 mm), drilling machine (portable)-, chuck diameter 3 - 16mm, 240 v +, chuck key, extension cable-20 metres, hot wire cutter-40 w, 240v, jig saw (portable)- power range, 300 600 w, 240v + allen, key(eu), metal lathe-1.5kw, distance, between centres 750 mm, including tool bit, boring bar,, knurling tools, parting tools, tail, stock, chuck key, centre drill, dead, centre, revolving centre, face, plate, 4-jaw and 3-jaw chucks., (eu), planer / thicknesser-maximum, planing width 310mm,maximum, thicknesser capacity 230, mm,power range 3kw to 4kw,, 240 v + fence(eu, router (portable)- power range, 1200w to 1800 w, 240v + key, (eu), sander orbital-power range 250, w to 300 w, 240v (eu), soldering iron-80 w, strip heater-140 w, 240v, welding machine-electric arc, 6kw, 150a, 240v (with protective, casing) incluing clamp, cables and, shield. (eu), wood working lathe-distance, between centres 1093 mm, 550, w, 500 - 2000 revolutions per, minute including face plate, dead, centre, revolving centre, turning, tools and tool rest., abrafile frame-4" deep/blade, length 6" (+ blade on frame), adjustable spanner-jaws open : 22, mm length: 200 mm, adjustable spanner-jaws open : 31, mm length: 300 mm, anvil-50kg, bench hook*-material: beech, size:250 mm x 150 mm, bench shear (guillotine)- up to 4, mm sheet and 10 mm rod, bradawl-minimum blade length, 32 mm, carpenters mallet-4.5 head width, centre punch-round head,, knurled body, 4" length, centre square-std size 75 mm, chisels- mortice-size: 6 mm, chisels- mortice-size: 9 mm, chisels -bevelled edge-size: 12, mm, chisels -bevelled edge-size: 19, mm, chisels -bevelled edge-size: 25, mm, chisels- firmer-size: 6 mm, chisels- firmer-size: 12 mm, chisels- firmer-size: 25 mm, cold chisels-type: flat, size:150 mm x 12 mm, combination drill-std drill set, combination pliers-size: 200 mm, coping saws-blade length: 150, mm, corner clamps-cramping capacity, 4" mild steel type, countersunk bit-head diameter:, 3/8" length: 2", dividers-length 6", engineers square-length 6", engineers vice-jaw width: 6", engineer's swivel base table (50, mm), forstner bit-bit set: sizes 10, 12,, 15, 16, 18, 20, 22, 25, 26, 28, 30,, 35, 40, 45 & 50 mm, gcramps-capacity: 6", gcramps-capacity: 12", hacksaw-non-adjustable 12", tubular frame wing nut tensioning, device for 12" blades, hammer: ballpein-0.5 lb, hammer: ballpein-0.75 lb, hammer: ballpein-1 lb, hammer claw-0.5 lb, hammer cross pein-0.75 lb, hand drill-chuck capacity 8 mm, hand files including handles-size:, 6", hand files including handles-size:, 8", hand files including handles-size:, 10", hand saws-22" long - cross cut, hand saws-22" long -rip, inside calipers-arm length 6", jack plane-14" long, jenny calipers-arm length 6", junior hacksaw-length blade 6", machine vice-maximumm jaws, opening 85mm, marking gauge-minimum length, 240mm, marking knife-length of body, 15cm, measuring tape-measuring length:, range 3m to 5 m, metalwork bench-size 2010 x 810, x 800mm, mitre box-mitre block 9" long, (plastic), mole grip-length 7, nail punch-set of 4 nail punches;, 1.5, 2.5, 3 & 5 mm, needle files-set of 6 - 14cm, oil can-2 pints capacity (1-2 pint), oil stone-150 mm length, outside calipers-arm length 6", pincers-length of body: 180 mm, pipe wrench-length: 300 mm, rasps-length size: 200 mm - 350, mm, ring spanner-set 6mm 25mm, riveting machine kit-sets rivets, up to 5 mm

Central Government/Public Sector

CTN :44568757

30 Mar, 2026 NA

Multi City - Gujarat

Tender For auction sale of pway scrap - scrap pway ms material unserviceable qty 58.001 mt such as height gauge in cut pieces ( various types of ismb 400, ismb 250, channel,angle plates, rods, flat bar, nut bolts, rivet & miscellaneous fitting etc. location gda yard at km 469/2052 b/w jp & godi line, and at krsa yard km 458/38-40 , 458/1071-1077. delivery by actual weight only and on as is where is basis. custodian: sse pway gda. fdp 50 days. the lot details are as per jvr and measurement sheet only.