Latest masonery work Tenders | Government masonery work Tenders

CTN :45703781

17 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of upgradation fabrication and refurbishment of conference room with all associated accessories-, slate size: 18 x 18 inches, thickness of slate: 03 mm, slate base: polyfiber, colour: naturally slated teak wood finish, ingredients - recycled rubber crumb and polymer - voramer rr-1009, characteristic-shock absorbent and anti skid, . specific feature: water repellant and scratch resistant, provisioning of over head partition boards for conference room, , aluminum frame paneling for over head structure. area: -288 sq.ft, over head partition boards-288 sq.ft, cooler warm white energized shades with a kelvin range of 2200 k to 6500 k. quantity: 04 nos, moisture absorbent anti odour fragranced overlay coating, temperature control unit with moisture controller and all associated accessories, specifications and performance parameters:, capacity: 2 ton, type of indoor: cassette, voltage/frequency / phase: 380-415v/50 hz/3 phase, compressor type: dual rotary, refrigerant: r 32, -nominal capacity (tr) as per bee: 3 tr, -noise level indoor (high/medium/ low) in db(a): 57.5/53/50.2, - moisture removal (litres/hour): 5.2, cooling capacity (btu/hr): 35997, - ambient temp (cooling)°c: 52°c, 840 x 245 x 840 idu dimension (wxhxd) mm, idu grill dimension (wxhxd) mm: 1020 x 50 x 1020 user interface - lcd remote with night glow function

CTN :45438320

06 Jul, 2026 45.00 Lacs

Ranga Reddy-T - Telangana

Tender For corrigendum : supply of providing and laying of painting works , patch works , waterproofing works , dismantling false ceiling , dismantling bison board , dismantling woden partistion , window closing , dismantling existing washbasin , cleaning , room 3 , providing toilets , toilet renovation works , roofing and false celing works , room 9 , floor patch works , dismantling of toilets , dismantling damaged windows , room 14 15 , dismantling existing doors , repairs to existing ventilator windows , dismantling existing wall and floor tiles , structural repair and opening modification works , dismantling brick structure and floor repair , dismantling and vegetation removal , dismantling existing broken and damaged glass panes , cpvc water supply line , site clearance and general demolition works , anti termite treatment , rodent and pest control treatment , overhead water tank cleaning repair and disinfection , storm water drain and surface drainage , signage and room identification , comprehensive checking of 1 nos 250 kva outdoor type substations including inspection , aluminium paint , servicing of existing 11 kv 400 amps 3 pole gang operated type air break ab switch , supplying and replacing damaged or worn out copper metal , supplying and replacing damaged or defective 11 kv post top insulators , supplying and replacing damaged or defective 11 kv pin type insulators , servicing of earth pits , supply installation testing and commissioning lbs , xlpe insulated aluminium conductor armoured ht cable , providing indoor or outdoor type heat shrinkable , supplying and laying of 3.5 core x 240 sq.mm 1.1 kv grade aluminium conductor xlpe insulated , supplying and making end termination for 3.5 core x 240 sq.mm 1.1 kv grade , joint for existing single run lt power cable of size 3.5 core x 240 sq.mm , comprehensive servicing and preventive maintenance of existing ht transformer , supply, fixing, installation, testing and commissioning of lightning arrester , providing and fixing cable identification tags , supply, installation, testing and commissioning sitc main mv panel , supply, installation, testing and commissioning sitc cubicle pdb panel , supply, installation, testing and commissioning sitc feeder pillar box , providing and installation of maintenance free earthing station , supplying and laying of 3.5 core x 120 sq.mm 1.1 kv grade aluminium conductor xlpe insulated , providing laying and fixing of overhead perforated or slotted ms cable tray , supply installation testing and commissioning 7 segment distribution board , providing fabricating supplying, installing testing and commissioning of electrical socket box

CTN :45692458

15 Jul, 2026 75.91 Lacs

Panaji - Goa

Tender For supply of machinery and equipment - uv-vis spectrophotometer spectrophotometer should be of true double beam optics system. sample compartment should have dedicated one reference cell holder and one sample cell holder. system should be czerny-turner monochromator with lo-ray-ligh grade blazed holographic grating or equivalent. system should have a light source of 20-w halogen lamp and deuterium lamp. automatic switch over of light source to be possible and auto position adjustment. system should have a fixed spectral bandwidth of 1nm. system should have facility to use as stand-alone keyboard-display and with pc-controlled software. wavelength range should be from 190 nm to 1100 nm and wavelength accuracy should be 0.1 nm at d2 656.1 nm & 0.3 nm for entire range. stray light: less than 0.02% at 220 nm (nai)less than 0.02% at 340 nm (nano2) less than 0.5% at 198 nm (kcl) photometric range:absorbance: -4 to 4 abs transmittance: 0% to 400% system should have photometric accuracy : 0.002 abs at 0.5 abs 0.004 abs at 1.0 abs 0.006 abs at 2.0 abs(measured using nist930d/nist1930 or equivalent) system should have a baseline flatness: less than 0.0006 abs (1,100 to 190 nm, one hour after light source turned on) system should have a noise level: less than 0.00005 abs (700 nm). detector should be silicon photodiode only. system should have a usb drive port to connect the printers or external drives. system should compulsorily have bio-method mode of measurement for determining dna and protein concentrations. quantitates dna or protein using the absorbance at 260/230nm. system should be capable of identification of organic compounds, chemical reaction tracking and enzyme reaction measurement. pc with relevant hardware including monitor keyboard, mouse., fuming hoods the proposed floor-mounted aerodynamic fume hood (1800 1000 2350 mm) is designed for safe handling of hazardous fumes, ensuring high performance, durability, and compliance with international standards. the system should be a robust, corrosion-resistant, and safety-compliant solution with efficient airflow management, user-friendly maintenance features, and adherence to international laboratory safety standards ideal for advanced research and chemical handling applications.1) design & compliance aerodynamic structure with automatic bypass airflow system. conforms to ashrae 110:2016 / en 14175 standards, including tracer gas containment test. certified ashrae compliance required 2) construction & materials made of powder-coated galvanized iron (gi, 120 gsm, is 277 compliant) sheet thickness: 1 mm (1.2 mm for structural supports) heavy-duty base frame: 60 40 2 mm phenolic resin (6 mm) inner liner: chemical-resistant, smooth, easy to clean ss 304 worktop with 15 mm raised edges for spill containment ss 304 aerodynamic airfoil with anti- corrosive coating 3) dimensions & workspace usable workspace: 1500 mm (w) 850 mm (d) 1180 mm (h) clear viewing height: 1100 mm modular base cabinets with maintenance access 4) coating & finish 8-stage chemical pre-treatment epoxy polyester / polyurethane coating (70 80 microns) corrosion resistance validated by 1000-hour salt spray test 5) functional features vertical sliding toughened glass sash (4 5 mm), counterbalanced openable front top panel for easy maintenance aerodynamic baffle system for efficient fume removal (light to heavy fumes) flow control damper for airflow regulation 6) utilities & safety integrated gas, water, and electrical fittings in corner posts remotely operated, color-coded service valves safety partition between utilities no cable entry below sash (enhanced safety design) electrical fittings: norysis /legrand (230v, 5/16a, 50 hz) 7) accessories pp cup sink with water tap and drainage led lighting with protective enclosure adjustable leveling screws ( 10 mm) storage base cabinets with shelves and self-closing shutters 8) centrifugal blower specifications remote, silent ms + frp blower with chemical-r

CTN :45048307

31 Jul, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

Central Government/Public Sector

CTN :45411900

01 Jul, 2026 25.00 Lacs

Pathankot - Punjab

Tender For corrigendum : repair/maint to flooring, tilling, plinth protection, masonery work, plumbing, sanitary fittings, chajjas, parapets, facia, roof plaster, joinery and miscellaneous work in otm accn in aor of age br-ii under ge (west) pathankot

State Government

CTN :45646733

30 Jun, 2026 52.34 Lacs

Nawanshahr - Punjab

Tender For construction stone masonary water recharging cum silt detention structure in village shahbajpur, golu majra and crate wire structures in village behrari, tundewal, mehandipur, thanwala, shahbajpur and run off control structure in village lambuan

CTN :45657508

03 Jul, 2026 NA

Ghatampur - Uttar Pradesh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - civil masonery work on boiler erection; civil masonery work on boiler erection; service provider

CTN :45657559

03 Jul, 2026 NA

Ghatampur - Uttar Pradesh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - civil masonery work on boiler; civil masonery work on boiler; service provider

CTN :45333373

26 Jun, 2026 3.33 Crore

Muzaffarnagar - Uttar Pradesh

Tender For corrigendum : supply of interactive panels with cpu (q2) , professional large format display (v2) (q2) , weighing machine , mill house , fully automatic jaggery production unit , solar panel foundation and all related items , structure of complete plant , bought out for complete plan , erection of mill house and boiling house , hdg set , submersible , fire fighting equipment , hcl kit single , oilfree 15 com , air filter , cylinder c2h2 , regulator c2h2 , hood aas , vacuum hot air oven , digital hot air oven , air circulation fan , microprocessor digital temperature indicator , digital timer , heating mantle , digital muffle furnace , single beam uv , double beam uv , digital photo colorimeter , weighing balance , analytical balance cy , water bath , pid temperature controller , atomic absorption spectrophotometer , gas chromatography , fused silica capillary column , gas purification panel , electromechanical voltage stabilizer , carbon steel cylinder , pressure regulator , glassware , servo candy pillopack wrapping machine , horizontal flow wrapepillopack high speed packaging machine , automatic packing machine , vertical single face paper corrugating machine , corrugated sheet pasting machine , eccentric slotter machine , bar rotary cutting creasing machine , stitching machine , paper reel to sheet cutting machine , flexo graphic printing machine , printing machine , manual jar filling machine , manual pouch sealing machine , manual sticker labelling machine , bag sewing machine , bar coding equipment , bar reader machine , projector , laptop , public address audio system , pantry , desktop with accessorie , tv 45 inch screen , solar panel , bio fertilizer plant , cctv unit for control ) /bid number : gem/2026/b/7564787 * /dated: 26-05-2026 & & / bid document 1 / 42

CTN :45380941

19 Jun, 2026 NA

Dimapur - Nagaland

Tender For bid to ras bid to ras corrigendum : supply of shelter parts constr mtrls elect furniture and toold items for store shelter - shelter parts constr mtrls elect furniture and toold items for store shelter 2654 d d - socket outlet multipurpose 2 in 1 of 6 and 16 amps flush button type isi marked , modular socket outlet multipurpose 2 in 1 16 amps flush button type isi marked , surface mounting modular boxes suit for switches 12 module of size 8 inch into 6 inch , surface mounting modular boxes suit for switches 8 module of size 8 inch into 3 inch , combined cover plate with frame inner and outer of 12 module , combined cover plate with frame inner and outer of 8 module , cealing rose with square box 65 into 50mm 2 to 3 terminals , pvc flexible nibbed pipe 20mm dia , mcb db 06 way spn 240 volt conf to is 13032 , mcb 10 amp sp 240 volt breaking capacity 10 ka conf to iec 60898 , mcb 20 amp sp 240 volt breaking capacity 10 ka conf to iec 60898 , mcb 32 amp sp 240 volt breaking capacity 10 ka conf to iec 60898 , pvc casing caping 38mm wide not less than 2 mm thick , pvc coupler for 38mm casing and caping pipe , pvc tee for 38mm casing caping pipe , pvc sockets for 38mm casing caping pipe , pvc corner bend for 38mm casing and caping pipe , pvc elbow for 38mm casing caping pipe , pvc junction linker 75 into 75mm , house service bracket hook type complete with 3 mtr long gi pipe 40mm dia and ms hooks clamps ans stay , pvc conduct pipe 20mm dia isi marked , pvc coupler for 20mm dia coduict pipe , pvc elbow for 20mm dia conduict pipe , pvc space bar saddles for 20mm dia pvc pipe , insulation tape 19mm width 25mm long , no 8 into 19 csk screw full threaded , no 8 into 32 csk screw full threaded , no 8 into 50 csk screw full threaded , no 8 into 75 bolt and nuts full threaded , store rack as per specification given in appx c of ts , chair writing as per specification given in appx d of ts , writing table as per specification given in appx d of ts , almitrah steel large as per specification given in appx d of ts , hand held trolley as per specification given in appx d of ts , hand held fire extinguisher as per specification given in appx d of ts , smoke alarm as per specification given in appx d of ts , heat alarm as per specification given in appx d of ts , habd held grinder cutter 125 l professional rated input power 1800 w 11500 rpm 125mm disc dia make as per appx ii of ts , bosch grinder cutter blade 125mm dia make as per appx ii of ts , portable welding machine arc 220a built in hot start anti stick and adjustable arc force heavt duty make as per appx ii of ts , plaster 6 inches material wooden heavy duty wooden hand float trowel 10 inch into 6 inch polished wood plastering , plaster 8 inches material wooden heavy duty wooden hand float trowel 10 inch into 6 inch polished wood plastering , hand gloves masonery work flocked liner neoprene over latex coating safety gloves , spirit level 3 feet , spanner set no of spanner 8 size 6mm to 22mm generally conf to is 2028 to 2008 make as per appx ii of ts , plumbob with kanda and 2 mtr thread make as per appx ii of ts , iron tasala 10 kg capacity , iron bucket 15 ltr capacity , nylon rope , sintex 500 ltr thrree layer pvc water tank 500 ltr capacity make as per appx ii of ts , brick hammer weight 5 kg make as per appx ii of ts , ball pane hammer weight 1 point 35 kg make as per appx ii of ts , ms electrical tool kit make as per appx ii of ts , welding rod 60 pcs size 4mm into 450mm in one pkt , double wheel concrete trolley fabricated heavy duty ms sheet and ms frame with 80 to 100 ltr cap constr mtrls with loading cap upto 300 kg make as per appx ii of ts , drilling machine adopter make as per appx ii of ts , screw driver set make as per appx ii of ts , cutting plier make as per appx ii of ts , wire cutter make as per appx ii of ts , tester make as per appx ii of ts , revit //bid details 2 / 58 machine make as per appx ii of ts , revit 500 nos in one pkt , concrete mixer machine 230 ltr with 1 h

Masonery Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government