Get complete information related to latest Masonry Primer Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Masonry Primer Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Masonry Primer Tenders.
Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - thermal power plant; work for supply and apply of one coat of epoxy primer red oxide and two coat synthetic enamel oil paint anti corrosive at various structure as pe..
Tender For corrigendum : repair to sunken flooring, plumbing with connected items to otm accn in aor of age b/r-ii of ge (east) ferozepur cantt - demolition of un-reinforced cement concrete in any position, complete all as specified and directed., m&l for cement concrete (1:5:10) type e-2 using 40 mm graded stone aggregate as in filling in sunkan slab or as in sub base, mass concrete, complete all as specified and directed., m&l for 15 mm thick rendering over concrete surface of sunken floor in cm 1:3 on wall as well as sunken floor finished even and smooth without using extra cement using wpc complete all as specified and directed.(wpc measured and paid separetely), m&l for water proofing treatment to rcc sunken floor including wall comprising with the following course of treatment/ specifications form bottom to top:-(a) applying evenly a tack coat of industrial bitumen 85/25 @ 1.6 kg per sqm over a coat of bitumen primer @ 0.40 ltr per sqm including preparation of roof surfaces complete all as specified and as directed.(b) app based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.note: (i) laying of app based membranes shall be done by torch on method or as per manufacturers instructions.(ii) a minimum overlap shall be not to be less than 150mm of polymeric membranes and sealed all overlaps and joints as manufacturers instructions.(iii) all ci/pvc traps in sunken slabs to be enclosed with pcc 1:1.5:3(min 15 cm) all round., supply only integral water proofing compound, complete all as specified and directed., taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even including wpc,preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls complete all as specified and directed. (wpc measured and paid separately), m&l for preparing old surfaces plastered or unplastered of walls, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of cement based paint complete all as specified and directed., m&l for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and smooth without using extra cement complete all as specified including preparation of new surfaces of wall and applying two coats of oil bound distemper on walls including corneces, pillars etc complete all as specified & directed., m&l for preparation of old decorated surface of wall and applying one coat of oil emulsion distemper, complete all as specified and directed., m&l for rendering 5 mm thick on ceiling surfaces in cement mortar (1:3) finished even & smooth without using extra cement including preparation of new plastered or unplastered surfaces and applying two coats of white wash on ceilings, complete all as specified and directed., m&l for preparing old surfaces plastered or unplastered of ceiling, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime wash (white washing), complete all as specified and directed., resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 sqm but n.exc. 2 sqm each complete all as specified & directed., taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 square metre each including cut
Tender For corrigendum : supply of n8010-p009604 black colour tin free spc a f paint for boottop application , n8010-p009602 brown light red tin free spc a f paint for u w application , n8010-p009603 red brown darkred tin free spc a f paint for u w application , n8010-p061977 anti corrosive llps alluminium , n8010-007509 paint polyurethane grey , n8010-p061944 anti corrosive llps grey bronze , n8010-p009679 epoxy based anti corr paint for application in ballast tank , n8010- p009601 tie coat for application of tin free spc a f paints , n8010-p009678 epoxy based primer for application in ballast tank , n8010-p060334 sigma thinner 9192 , nsn8010-720488228 sigmadur gloss pine green ral 6028 , n8010-tp00003 sigma cover 350 green , n8010-tp00002 sigma cover 350 red brown , n8010-007507 paint finishing ral 7040 grey , n8010- 007508 paint finishing ral 9011 black , n8010-007728 h p non skid coating for flight deck w o arrestor gear , n8010-p061691 thinner no 17 jotun paint for epoxies for ekms , n8010-p063130 sigmacover 280 , n8010-007693 h p advanced non skid coating for helo and flight deck , n8010-007694 h p anticorrosive paint for use under non skid coat )
Tender For bid to ras supply of cu slag blasting sa 2.5 preparation , primer inorganic zinc silicate 65 micron x 1coat , manual or power tool st2 or st3 surface preparation , primer surface tolerant epoxy 2component 75 micron x1 coat , midcoat h.b.glassflake epoxy 200 micron x 1coat for roof , midcoat polyamide epoxy mio 100 micron x 1coat , finish 2 pack pu finish 50 micron x 2coats
Tender For ms erw 250nb , ms erw 200nb , ms erw 150 nnb , ms erw 75 nb , sorf flange 100 nb 150 , sorf flange 150 nb 150 , 45 deg elbow 150 nb , 45 deg elbow 200 nb , 90 deg elbow 150 nb , 90 deg elbow 200 nb , blrf 150 nb 150 , caf gasket style 20 , 100 nb , caf gasket style 20 , 15 nb , caf gasket style 20 , 150 nb , caf gasket style 20 , 25 nb , caf gasket style 20 , 50 nb , gi pipe 15 nb , gi pipe 25 nb , gi pipe 50 nb , gi 45 deg elbow 50 nb , gi 90 deg elbow 25 nb , gi 90 deg elbow 50 nb , gi blrf flange, 150cl, 50 nb , gi swrf flange, 150cl, 25 nb , gi sorf flange, 150cl, 50 nb , gi swrf flange, 150cl, 15 nb , 15 nb half coupling , 15 nb gi tee one side threaded , 25 x 25 x 15 mm gi unequal te , 15 nb 90 deg gi socket weld , 15 mm sockolet, sch 80 , stud bolt 1 by 2inch , length 55 mm , stud bolt 1 by 2inch , length 70 mm , stud bolt 1 by 2inch , length 85 mm , stud bolt 3 by 4inch , length 100 mm , stud bolt 5 by 8inch length 90 mm , supply and installation of double hydrant , supply and installation of monitors , supply and installation of hose box , hose fire figting , supply and installation of gate valve 100 nb , ball valve 15nb 800 , supply and installation of y strainer , supply and installation of deluge valve , supply and installation of spray nozzl with coupling , supply and installation of flp pressure switch , supply and installation of quartzoid bulb , supply and installation of glycerine filled pressure gauge 0 20 kgf by cm2 , supply and installation of soleniod valve with coil , supply and wrapping of wrapping coating , fabricaiton of pipeline , laying of pipeline a by g , laying of pipeline b by g , surface preparation sand blasting , primer ms erw pipes , mio ms erw pipes , final coat ms erw pipes , etch ,ezp pri and synth enml gi , back filling , brick masonary , external plaster 30 mm , excavation , supply and laying of hume pipe 150 nb , ms inserts plate ,angle channel etc , pcc , rcc m20 grade , s,f,e and w of structural steel , gi honey comb gratings , reinforcemnent steel , lettering upto 2 inch , erection of valves , hydrant , monitors, hose boxes , fab erect air station with ins , air filter regulators , fabrication and erection of 15 nb and 25 nb air line , s,f,e of pipe supports , s,f,e, of hand railshand rails
Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l
Tender For notice for the vbgram materials supply - supply of first aid box including medicines (specified by pia) at, model citizen information board for ibs( specification-made of, with a height of 3ft, width 2ft and thickness of 4 inch & 30 degree, head with pentagonal shape including fixing the mgnrega, biswa bangla logo in upper side of the board and supply in, mgnrega worksite anywhere., model citizen information board for community (specification-, of brick structure with plastering and colour ( back colour, and black for writting) with a height of 4ft, width 3ft and thickness, 4 inch & 30 degree in head with pentagonal shape including fixing, the mgnrega and biswa bangla logo in upper side of the board, supply in the mgnrega worksite anywhere., g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., other local wood, supplying, fitting & fixing factory made p.v.c. door frame of size, mmx47 mm with a wall thickness of 5 mm, made out of extruded, mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china foot rests 250x125x25 mm, ptmt - towel rail (600 mm), fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, hydraulic door closer tuular type aluminium section body, anodiesd aluminium hanging type door stopper, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated, factory made solid panel pvc door shutter consisting of outer, made out of m.s. tubes of 19 gauge thickness and size 19 mmx19, mm for styles, top and bottom rails, m.s. frame shall have cost, steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame, made of flat bent bar, end bifurcated with necessary screws etc., cement concrete(1:2:4) as per direction. (cost of concrete will be, paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured, from extruded section conforming to i.s. specification (i.s. 205/66), and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x, 4.0mm, anodised aluminium barrel / tower / socket bolt (full covered) of, approved manufactured from extruded section conforming to i.s., 204/74 fitted and fixed with cadmium plated screws: (vi) 200mm, long x 10mm dia. bolt., anodised aliminium d-type handle of approved quality, manufactured from extruded section conforming to i.s. specification, (i.s. 230/72) fitted and fixed complete: (a) with continuous plate, base (hexagonal/ round rod) (iii) 100 mm grip x 12 mm dia rod., (c) supplying 6 levers 'godrej' crystal satine mortice lock with keys, including fitting & fixing complete., i) iron hasp bolt of approved quality fitted and fixed complete, (oxidised) with 16mm dia rod with centre bolt and round fitting. (, 200mm long, door stopper.(brass), red lead primer for steel grill, interior premium imulsion(plastic paint), exterior imulsion weather coat paint, distemper paint, supply of upvc pipes (b type) (for soil pipe purpose) & fittings, conforming to is-13592-1992 (a) (i) single socketed 3 meter length, (c) 160 mm, (ii) plain tee for soil pipe purpose. (c) 160 mm, v) plain y for soil pipe purpose. (c) 160 mm, supplying, fitting & fixing upvc down pipes a- type and fittings, conforming tois:13592-1992 with all necessary clamps nails,, including making holes inwalls, floor etc. cutting trenches in any soil, through masonry concrete, structures etc if necessary and mending good damages including, joining withjointing materails (spun yarn, valamoid/bitumen/m-seal, etc) complete. a) upvc pipes: (ii) 110 mm. dia., s, d) shoe (ii) 110 mm. dia, qgs seed(10 variety), g.i. hollow pipe squre or
Tender For bid to ras corrigendum : providing of facility management services - lumpsum based - industrial; special repair no 1 providing and applying one coat of acrylic emulsion paint of approved make and shade with rolled finish as per manufacturers instruction to the internal plastered surfaces for walls ..,facility management services - lumpsum based - industrial; special repair no 2 providing and applying two coats of acrylic emulsion paint of approved make and shade over a coat of approved cement primer with rolled finish as per manufacturers instruction to the ..,facility management services - lumpsum based - industrial; special repair no 3 providing, fabricating and fixing miscellaneous structural steel grills, gates and other structural items etc, made out of square rods, flats, plates, angles, hollow pipes, channels ..,facility management services - lumpsum based - industrial; special repair no 4 providing and laying designer concrete tile flooring (using eurocon / ultra / duracrete make or approved equivalent type and make) of approved colour and design over 20mm thick cement..,facility man
Tender For upgradation of basketball court - repair of cemented flooring , repair of basketball poles and frames , synthetic primer layering , resurfacing , cushion coat and colour marking
Tender For special repair to gania badamul-kuturi road such as pot hole repair patches with wmm, primer, tack coat, pmc and sc from 0/0km to 10/057km ) for the year 2026 27