Latest masonry wall work Tenders | Government masonry wall work Tenders

corporations/Associations/Others

CTN :45525427

22 Jun, 2026 5.50 Lacs

Nicobar Island - Andaman And Nicobar Islands

Tender For construction of rcc retaining wall alongwith drain with covering slab from sitaram house to existing major drain at sunder colony at haddo ward no.02.

State Government

CTN :45514852

18 Jun, 2026 1.53 Lacs

Trivandrum - Kerala

Tender For dbhss thakazhy in ambalappuzha group-covering top portion of south side compound wall using gl frame work and gl sheet-reg.

CTN :45516521

25 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For and fixing arrangements , providing and supplying high rise adjustable seating arrangement with height adjustment mechanism cushioned seating and sturdy base , providing fabricating supplying and fixing aluminium panel with aluminium frame including mesh fittings and installation , providing supplying and fixing wall mounted backside mirrors including cutting polishing edge finishing and fixing with suitable supports or adhesives , providing and fixing laminate finish on existing wooden cupboards including surface preparation adhesive application pasting of laminate sheets edge finishing and polishing , providing fabricating supplying and installing customized toughened glass partition of size 12 feet x 10 feet including frosted printed stickering necessary fittings and fixing arrangements , providing and applying wall puty and painting to internal wall surfaces of measuring 13 feet x 17.5 feet including surface preparation putty application primer and final coats , providing and fixing suspended false ceiling system using 12mm thick gypsum boards fixed over gi metal framework for an area of 650 sqft including supply installation jointing and finishing , providing fabricating supplying and installing wooden cupboard of size 3 feet x 2 feet x 6 feet including carcass shutters internal shelves hardware and finishing , providing fabricating supplying and installing wooden table of size 3 feet x 3 feet x 5 feet including structure tabletop supports and finishing , providing fabricating supplying and installing glass door showcase unit of size 5 feet x 2 feet x 7.5 feet including structure glass shutters internal shelves hardware and finishing , providing fabricating supplying and installing wooden storage box of size 2 feet x 3 feet x 3.5 feet including structure top opening doors internal storage space and finishing , providing fabricating supplying and installing aluminium entrance door with full height partition system of size 12 feet x 10 feet including aluminium framing glass panels door shutter fittings , providing fabricating supplying and installing l shape cushioned seating system of overall size 8 feet x 6 feet including structural framework cushioning upholstery and fixing for room 2 , dismantling shifting and refixing of exisiting door shelter canopy or shade including careful removal transportation within site reinstallation and proper fixing , providing fabricating supplying and installing internal door partition inside existing store including framing partition panels door shutter fittings and finishing , providing fabricating supplying and installing outer shelter structure for store area of size 30 feet x 24 feet including structural framework roofing sheets supports and fixing arrangements , providing fabricating supplying and installing aluminium partition system for canteen outer area covering a total of 900 sqft including aluminium framing infill panels glass or board fittings , providing supplying works for area preparation improvement and finishing including surface corrections flooring wall treatments //bid details 2 / 23 partitions and allied activities to make the space functional safe , providing fabricating supplying and installing aluminium glass partition locker unit of size 7feet x 5 feet x 2 feet including aluminium framework glass panels internal storgae compartments shutetrs

corporations/Associations/Others

CTN :45495363

23 Jun, 2026 3.60 Lacs

Villupuram - Tamil Nadu

Tender For supply and delivery of kitchen equipments for amma unavagam in villupuram municipality - supply and delivery of steam boiler with stand & burner water capacity 250 liters, operated by both lpg and fire wood, outer shells 8mm ms plate, inner shells 14 g (2.5mm thickness) 304 grade ss with 10 g (3mm thickness) 304 grade ss sheet, automatic float valve assembly, safety valve, pressure gauge meter, water level indicator, drainage valve, flame sensor, rubber gasket for inner vessel lid, ms stand 45x45x6mm angle, high pressure burner, ncv with fittings for lpg and chimney 10 feet.(to generate steam) , steam generator (m.s outer :28 dia x 45 h, s.s inner 17 dia x 35 h) , m.s.fire bar stand , 6 " dia ms smoke pipe (3feet) , supply and delivery of rice vessel 25 kgs capacity, operated on steam made out of 14 g (2.5mm thickness) 304 ss sheet, lid and tilting handle, side support ‘u’ clamp, unloadable by tilting the handle, mounted on a type tubular ss stand 6mm thickness, ss flat with lick rod.(rice cooking & mu ltipurpose vessel) , supply and delivery of dhal vessel 25 kgs capacity, double jacketed, made out of 14 g (2.5mm thickness) 304 grade ss sheet with lid, tilting handle, side support ‘u’ clamp safety valve, steam trap, unloadable by tilting handle, mounted in a type tubular ss stand 6mm thickness ss pipe, ss flat with lock rod.( size 16" dia x 16 h , 50 ltrs to make dhal without mixing steam in dhal) , supply and delivery of single burner cooking range size : 24”l x 24”b x 18”h, top : 304 grade 16 g ss sheet, frame : 32x32x6mm ms angle, covering : 20 gauge ss 304 grade sheet four sides, pan support : 1 no cast iron grid, burner : 1 no, t 35 high pressure burner lpg with fittings, ncv : 1 no, legs : 1 ½” 16 g ss 304 grade pipe legs with adjustable nylon bullet legs.(for cooking purpose) , supply and delivery of double burner cooking range size : 48”x27”x16”, top : 304 grade 16 g ss sheet, frame : 32x32x6mm ms angle, covering : 20 gauge ss 304 grade sheet four side, pan support : 2 nos cast iron grid, burner : 2 nos, t 35 high pressure burner lpg with fittings, ncv : 2 nos, legs : 1 ½” 16 g ss 304 grade pipe legs with adjustable nylon bullet legs. , supply and delivery of idly cooking unit, ss vessels, plastic materials, mixie, tilting grinder, pulvariser grinder and other equipments , ss rice karandi, big size , ss sambar karandi, big size , ss water drum 50 litres capacity , ss water jug , ss plates, round plain , ss tumblers, with curved edges, 300 ml capacity , mobbu , plastic tray , plastic pot , plastic mug , plastic drum, 50 litres , plastic container (10 litres , plastic muram , plastic stool medium , cloth mat , hot box , mixer heavy duty 1 hp, 3 jar , tilting grinder 15 litres capacity , wall clock , supply and delivery and fixing of r.o plant isi make, with control panel, sand filter vessel, carbon filter vessel, 10 micron filter, 4 membrane, 4 membrane housing, 10 filter housing, 2 pressure gauge, booster pump (cri), 2 vessel valve, pebbles as required , gst. 18% (cgst-9%, sgst-9%) , , , , , ,

State Government

CTN :45426207

12 Jun, 2026 33.76 Lacs

Lucknow - Uttar Pradesh

Tender For sharda nagar yojna ke antergat rajnikhand powar house se lekar priyam plaza crossing tak nala covering and nalo ki ritaining wall ka kary

corporations/Associations/Others

CTN :45445697

19 Jun, 2026 15.14 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on "semi turnkey basis" under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as jointing sleeve binding wire, armour rod etc.

CTN :45439819

11 Jun, 2026 3.17 Crore

Patna - Bihar

Tender For providing and fixing poly carbonate sheet, re-fixing of ms grill and painting of existing compound wall, provision of main entrance gate for gate no. 1 and 3, security guard room for gate no. 1 and 3, provision of badminton court and basketball court rubberised flooring, provision of covering with pre-tensile fabric at walkway from canteen to girls hostel and electrical component works of nift campus, patna.

Central Government/Public Sector

CTN :45424890

24 Jun, 2026 NA

Multi City - Multi State

Tender For auction sale of - display of advertisements through vinyl wrapping on the exterior side wall surface (below window) of 11 emu rakes comprising 144 coaches (7 rakes of 12 coaches and 4 rakes of 15 coaches), along with full-face vinyl wrapping, inside panels, and route map advertisements in 01 ac emu rakes comprising 12 coaches, covering a total advertising area of 3873.80 sq. mtr over mumbai division, western railway, for a period of five years.

CTN :44778628

05 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras supply of officers tea room at sauw ins satavahana d d - customised table top for coffee or tea kettle microwave induction cook top size 5 ft 3ft with multi drawers for storage of utensils , fabrication of customised wall mounted storage space 6ft x 1.5ft with 2 stacks for crockery and other utensils with 2 stacks for crockery , customised wall mounted display case of 6ft x 1.5ft of three stacks with glass enclosures with locking arrangement , customised 2mm thick blackout double layered zebra blinds with open or shut mechanism , wall paneling wit charcoal or pvc profiles , anti termite hadr material wall paneling , light emitting diode 75 inches diagonally visual display , customised wooden book or magazine shelve , laying of fine finish putty and finishing with royal emulsion coat , laying of electrical cales, metal boxes, control units and sockets for profile illuminations, hanging illumination, spot illuminations and diffusers and other necessary power related materials , customised tough end glass enclosures with shut and close hydraulic mechanism and other accessories with wood wall paneling around the enclosure , customised cushioned seating arrangemens with fine fabric finish seater , customised solid teak wood table with fine polish finish , customised step design and profile weather proof ceiling fabricaed with high density galvanized channels and 12mm thick gypsum sheet , fabrication of customised wall mounted covering arrangement for network switches with door and top mounted exhaust fans ) /bid number : gem/2026/b/7346120 * /dated: 07-04-2026 & & / bid document 1 / 15

CTN :45389727

18 Jun, 2026 NA

Howrah - West Bengal

Tender For zone no. 50 (general zone) under aen/1/hwh p.e. 30.06.2027 [ jurisdiction - all civil engineering works : in the area 0/0 to 6/0 km covering the following area: (i) repairing and painting of buffer along with construction of fouling mark. (ii) repairing and construction of cross drains (iii) renovation and repair of various offices, gang hut along with repairing and painting of boundary wall in yard area (iv) unforseen work including construction of pathway including yard area under the jurisdiction of aen/1/hwh.

Masonry Wall Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

corporations/Associations/Others

State Government

corporations/Associations/Others

Central Government/Public Sector