Latest master gauge Tenders | Government master gauge Tenders

CTN :45559939

04 Jul, 2026 22.40 Lacs

Sonipat - Haryana

Tender For corrigendum : supply of deflection of curved member apparatus , shear centre apparatus , portal frame apparatus , two hinged arch apparatus , cable geometry and statics apparatus , unsymmetrical bending apparatus , bending moment and shear force apparatus , maxwell reciprocal theorem apparatus , deflection of continuous beam apparatus , slope and deflection apparatus , behaviour of column and beams apparatus , elastic properties of deflection beam apparatus , two hinged arch apparatus , analysis of elastically coupled beam apparatus , pin joint truss apparatus , analysis of redundant joint apparatus , discharge over notches apparatus , pitot tube setup , impact of jet on vanes apparatus , digital handheld water velocity meters , tilting open bed flow channel flume , automatic traffic classification and counting counter , length gauge with isi certification mark is 2386 part i , speed gun speedster iii , gopro hero camera with tripod stand , thickness gauge with isi certification mark is 2386 part i , 75 mm sieve , 63 mm sieve , 50 mm sieve , 37 point 5 mm sieve , 25 mm sieve , 12 point 5 mm sieve , 9 point 5 mm sieve , 4 point 75 mm sieve , 2 point 36 mm sieve , gi pan and lid , 1 point 18 mm sieve , 600 micron sieve , 300 micron sieve , 150 micron sieve , 75 micron sieve , brass pan and lid , aggregate impact tester is 2386 part iv , crushing value apparatus is 2386 part iv , bitumen penetration kit is 1203 , flash point open and fire point cleveland is 1448 part 69 , ring and ball apparatus semi automatic is 1205 * /bid number : gem/2026/b/7615986 + /dated: 15-06-2026 ' ' / bid document 1 / 30

Central Government/Public Sector

CTN :45709681

13 Jul, 2026 NA

Multi City - Multi State

Tender For supply of one set consisting of following gauges- sr. no.1 : grease seal od ovaility checking gauge- gauge description - base plate diameter 300mm with basic accessories, dial indicator and od master gauge.(i) for measurement of od 209.187 at 6mm height for timken drg. no. e-58606 (hdl seal). (ii) for measurement of od 209.75 at 6mm height for skf drg. no. se-bt2-8515 d-23 (skf seal). (iii) od master gauge : od 209.78mm, with nabl calibration. (iv) digital dial indicator, model: 543-700, least count: 0.01mm, travel: 0-12.7mm, (purchased item), qty- 01 set, make: mitutoyo or equivalent. sr. no.2 : seal wear ring id ovaility checking gauge- gauge description-base plate diameter 300mm with basic accessories, dial indicatorand id master gauge. (i) for measurement of id 144.42 at 10mm height for timken drg. no. b-204944 (seal wear ring). (ii) for measurement of id 144.419 at 10mm height for neil drg. no. pesd-6075 (wear ringfor 6 x 11 class e ctrb). (iii) for measurement of id 144.45 at 10mm height for timken drg. no.rd-1637504 aa-13 (seal wear ring). (iv) id master ring gauge : id 144.42mm, with nabl calibrated. (v) digital dial indicator, model: 543-781, least count: 0.001mm, travel: 12.7mm, (purchased item), qty- 01 set, make: mitutoyo or equivalent. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45664221

06 Aug, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of set of master setting ring gauges for zero setting of bore gauges for 6fra6068 traction motor. material as per is 7018 part 1-1983/is748- 1990 and general tolerance as per is3485. one set consists of 8 master gauge having internal dia of:- (i) 320 mm. (ii) 306 mm. (iii) 215 mm. (iv) 206 mm. (v) 185 mm. (vi) 180 mm. (vii) 106 mm. (viii) 101 mm. tolerance (+/- 0.002 mm). qty-one no. of each size. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45617074

10 Jul, 2026 NA

Koraput - Odisha

Tender For tender for supply of tools as per drawing provided by hal - set of tips , take off segments , tool set , endoscope support , endoscope support , sheath , cap , blank , tapped cylinder , mambrane , exchange inlet blank , blank , seal plug m12 , blank , rear flange for dia 6 pin , moving blade checking tool , tilting tool , turning strriup , end shaft , sets of measuring pins , measurer dia 437g7 , measuring tool , measuring tool , measuring tool , radial play centering , support , measurer , master , position gauge , measurer , measurer 70.02/70.05 , master dia 312.50 , master dia 316.50 , master dia 420.9 , gauge , master , measurer , adjustable master , support , adjustable master h 70.02 , adjustable master h 70.05 , support , positional gauge , spline gauge , measuring tool , measuring tool , positional gauge , measuring tool , master disc , master gauge , master dia 46.20 , master dia 46.0 , master dia 45.80 , master dia 45.50

CTN :45608442

08 Jul, 2026 NA

Vellore - Tamil Nadu

Tender For calibration of master gauges, mill and etp flow meters

Central Government And Public Sector

CTN :45555715

23 Jun, 2026 NA

Malda - West Bengal

Tender For supply of set of master setting ring gauges for zero setting of bore gauges for 6fra6068 traction motor. material as per is 7018 part 1-1983/is3748-1990 and general tolerance as per is3485. one set consist of 8 master gauge having internal dia of: - (i) 320 mm. (ii) 306 mm. (iii) 215 mm. (iv) 206 mm. (v) 185 mm.(vi) 180 mm. (vii) 106 mm. (viii) 101 mm. tolerance (+/- 0.002 mm). qty-one no of each size. calibration certificate from nabl approved lab. to be submitted along with material. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45513795

22 Jun, 2026 NA

Sonitpur - Assam

Tender For supply of digital force gauge

CTN :45475071

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of non-consumables for ece department - purchase, dual output regulated dc variable power supply input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v overload protection. dc offset: 0 to 10 v adjustable. attenuation: 0 to 60 db., dso (digital storage oscilloscope) bandwidth: 50 100 mhz. sampling rate: 1 gs/s. channels: 2 (minimum). power supply: 100 240 v ac, 50 60 hz. automatic measurements: vpp, vavg, vrms, frequency, period, vmax, vmin, rise time, fall time, +width, width, +duty, duty, etc. horizontal scale: 5 ns/div 50 s/div or equivalent. vertical resolution: 8 bits (2 channelssimultaneously). vertical sensitivity: 1 mv/div 10 v/div (at input). waveform math: +, , , , invert, fft, etc. waveform storage: 16 waveforms or equivalent. communication interface: usb host and usb interface. display: 7-inch color display or equivalent. input impedance: 1 m 2% || 20 pf. accessories: 2 passive probes (1x/10x)., digital ic trainer kit with breadboard +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulse per press)., lvdt trainer kit ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain guage trainer kit ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual.

CTN :45465678

19 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply, installation and testing of electronic equipments - supply -ece lab equipments, single output regulated dcvariable power supply- input voltage: 230v / 50hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., dual output regulated dc variable power supply- input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator - frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v, digital ic trainer kit with breadboard - +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie- points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulseper press)., dc voltmeter(digital) - dc digital voltmeter - 3 digit led/lcd display, measurement range: 0 20 v dc,accuracy: class 0.5( 0.5 % full-scale), dc ammeter - dc ammeter digital - 3 digit led/lcd display, measurement range: 0 5 a dc,accuracy: class 0.5 ( 0.5 % full-scale), lvdttrainer kit - ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain gauge trainer kit - ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. instrumentation amplifiers with 3 digit display for strain / output voltage. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., ask modulation and demodulation kit - message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. supply voltage (board): +12 v, +5 v dc. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., fpga trainer kit - must use industry-standard mid-range fpga device usb-jtag programmable, compatible with vivado ise (webpack). power supply: 5 v dc through usb or external adapter. on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usb- uart bridge, usb cable. user manual., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

Central Government/Public Sector

CTN :45361594

19 Jun, 2026 NA

Bangalore - Karnataka

Tender For tender for supply of digital force gauge - digital force gauge 0 1000n batch 1 , digital force gauge 0 1000n batch 2 , digital force gauge 0 1000n batch 3 , digital force gauge 0 1000n batch 4 , digital force gauge 0 1000n batch 5 , digital force gauge 0 1000n batch 6 , digital force gauge 0 500n batch 1 , digital force gauge 0 500n batch 2 , digital force gauge 0 500n batch 3 , digital force gauge 0 500n batch 4

Master Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector