Latest material handling equipment repair Tenders | Government material handling equipment repair Tenders

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

Central Government/Public Sector

CTN :45247227

26 May, 2026 NA

Nagpur - Maharashtra

Tender For rate contract for hiring of services for handling geophysical equipment during ground gravity and magnetic survey work in block 9 for geological survey of madhya pradesh

Central Government/Public Sector

CTN :45137990

23 May, 2026 NA

Raigad - Maharashtra

Tender For repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; tender for the job of obtaining consent to establish for hter scheme at rcf thal unit through nipl route; as per scope of work; a) safety violation by contractor employee at work place: 1) working without wearing safety helmet (per person), 2) working without wearing safety shoes (per person), 3) working without wearing safety goggle &/or hand gloves during handling of hazardous chemicals, acid/alkali etc. (per person), 4) working without wearing safety belt (double lanyard full body harness) for height jobs above 2 meters. (per person), 5) working without wearing face shield during cutting, welding, grinding activity and during maintenance work on process lines and equipment. (per person), 6) not using ppe, tools/tackles as mentioned in safety work permit (per person), 7) working without valid test certificate for lifting tools/tackles (per incidence observation), 8) working without appropriate electric plug-pin, elcb/rccb/rcbo (per incidence observation), 9) working without a valid safety work permit (per incidence/ observation), 10) permit not available at site (per incidence/observation), 11) gas cylinder without flash back arrestor (per incidence observation), 12) gas cutting set with damaged hose pressure gauge without valve key (per incidence/observation), 13) gas cylinder without trolley (filled and empty) (per incidence/ observation), 14) unauthorized personal entering into cordon off area (per incidence/observation), 15) faulty wire/cable laying on ground or using snapped cables (per incidence/observation)., 16) improper hand tool or power tools (per incidence observation), 17) smoking at work place area. (per person), 18) found in intoxicated state (per person), 19) violation of road rules (per incidence observation), 20) b) safety violations by transport contractors, 21) faulty hazchem displayed on tanker (per incidence observation), 22) one pvc/tychem suit set if available (per incidence/ observation), 23) both pvc/tychem suit set are not available (per incidence observation), 24) fire extinguisher without hydro test. (per incidence/ observation), 25) trem card not available (per incidence/observation), 26) hazardous chemicals transportation training of driver by authorized agencies. (training card not available with driver) (per person), 27) lying/resting below the vehicle(per incidence/observation), 28) any other deviation found as per checklist for tankers (per incidence/ observation.

Central Government/Public Sector

CTN :45047757

14 May, 2026 79.73 Lacs

Faizabad - Uttar Pradesh

Tender For supply of "operation of baggage handling system ( both arrival and departure ) by engaging following minimum man power. a) electrician cum operator/ technician - skilled - 04 nos ( all days including weekly offs & holidays).b) skilled - 01 no. for data entry & other miscellaneous work (in general shift for six days in a week )note- contractor has to provide reliever on weekly offs / holidays of above required staffs except for sl. no. b) ", supply of red outer lens for rwy end light suitable for existing airfield ground lighting system (agl) complete as required .( existing light fixture is of vardhman make ), supply of green outer lens for rwy threshold light suitable for existing airfield ground lighting system (agl) complete as required .( existing light fixture is of vardhman make ), supply of yellow filter for runway edge light suitable for existing airfield ground lighting system (agl) complete as required .( existing light fixture is of vardhman make ), supply of 200w, 6.6/6.6a halogen lamp pk30d(64382 hlx-c) make - osram or equivalent suitable for existing agl/ cat-i fittings complete as required ., supply of isolating transformer of 200 watts, 6.6a/6.6a, 5kv, 50 hz suitable for existing agl/cat-i light fixtures complete as required. , supply of wind socks (cloth) for wdi(white/red) suitable for existing sgs make wind sock., supply of 360 degree outer clear lens for runway edge light fitting suitable for existing light fixture of vardhman make., supply of clear spreader lens for approach light fitting suitable for existing light fixture of vardhman make., supply of clear lens for papi suitable for existing papi system of vardhman make., supply of 2cx 4 sqmm. annealed tinned copper conductor pvc insulated pvc sheathed unarmoured flexible afl secondary lead up to voltage garde 1.1 kv conforming to relevant is up to date ammendment complete as required., supply of minimum 9 w led type aviation obstruction light in red colour having die-cast aluminum housing with red polycarbonate dome for better illumination, integral driver, ingress protection - ip65 (make- bajaj or equivalent as approved by eic), supply of 30 w movable led flood light (yellow colour) (make - philips , type - bvp102 30 or equivalent) complete as required at site., supply of 150 a, 1000v, 50 sq. mm terminal block suitable for mounting on din rail suitable for existing panel complete as required at site., supply of led driver of 80w, 25 v suitable for existing airfield signage board (make-electrosystem) installed in operational area complete as required at site., supply of 15 w led suitable for existing taxiway light fitting of vardhman make complete as required at site., supply of electronic driver suitable for existing 15 w led taxiway light fitting of vardhman make complete as required at site., supply of mnx 70 type 3 pole power contactor having ac-3 duty, 70a rating, ac1 -100 a rating, coil voltage- 230v ac, suitable for lighting switching applications, panel mounting, conforming to conforming to is/iec 60947-4-1 etc. complete as required., supply of isi marked, heavy duty, rigid pvc conduit, size- 25 mm dia, confirming to is 9537 (part 3) complete as required at site., supply of national flag of size 9144 mm x 6096 mm as per bis specification no is 1-1968 latest complete as required at site. , "supply of 18 mtr length tri-colour led rope light having transparent pvc type body material, ip65 protection, smd led strip as per lm 80/is16106, conforming to is 10322 and suitable for operation on 240 v, 50 hz single phase power supply complete as and when required. (make-philips/halonix/crompton/bajaj/osram) ", providing and fixing of temporary decorative lighting in tri-colors of national flag with led series lighting at terminal building and main gate of ayodhya airport having uniform spacing of between two rows is not to be more than 0.30 mtr for a continious three days on the occassions of republic day/independence day/diwali/new year including

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

State Government

CTN :44715665

05 May, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : site survey, designing, engineering, procurement, supply, loading, transportation, unloading, insurance, delivery at site, handling, storage, installation, testing, commissioning including documentation of all items/material required to complete works for turnkey based contract for conversion of existing 11 kv ht line and lt line network including consumer service lines into under ground cable network with ring main system at jamnagar city-2 division of jamnagar circle under pgvcl with gis mapping / geo urja mapping (developed by guvnl) and asset tagging under sdmf (package-64)

State Government

CTN :44715669

05 May, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : site survey, designing, engineering, procurement, supply, loading, transportation, unloading, insurance, delivery at site, handling, storage, installation, testing, commissioning including documentation of all items/material required to complete works for turnkey based contract for conversion of existing 11 kv ht line and lt line network including consumer service lines into under ground cable network with ring main system at jamnagar city-1 division of jamnagar circle under pgvcl with gis mapping / geo urja mapping (developed by guvnl) and asset tagging under sdmf (package-63)

State Government

CTN :44715636

05 May, 2026 NA

Bhavnagar - Gujarat

Tender For corrigendum : site survey, designing, engineering, procurement, supply, loading, transportation, unloading, insurance, delivery at site, handling, storage, installation, testing, commissioning including documentation of all items/material required to complete works for turnkey based contract for conversion of existing 11 kv ht line and lt line network including consumer service lines into under ground cable network with ring main system at kumbharwada sub division of bhavnagar circle under pgvcl with gis mapping / geo urja mapping (developed by guvnl) and asset tagging under si scheme (package-66)

State Government

CTN :44715637

05 May, 2026 NA

Bhavnagar - Gujarat

Tender For corrigendum : site survey, designing, engineering, procurement, supply, loading, transportation, unloading, insurance, delivery at site, handling, storage, installation, testing, commissioning including documentation of all items/material required to complete works for turnkey based contract for conversion of existing 11 kv ht line and lt line network including consumer service lines into under ground cable network with ring main system at diamond chowk sub division of bhavnagar circle under pgvcl with gis mapping / geo urja mapping (developed by guvnl) and asset tagging under si scheme (package-65)

CTN :44948764

11 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of ground handling equipment for mrsam c c - canisterised missile transportation trolley , cm horizontal lifting jig , rotating cradle with securing belts , container lifting sling , choke blocks , front section lifting device , front section transportation trolley , rear section transportation trolley , rear section weight cell , front section weight cell , article transportation trolley

Material Handling Equipment Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors