Get complete information related to latest Mattress Hiring Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Mattress Hiring Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Mattress Hiring Tenders.
Tender For supply of ground sheet khaki superior quality to is:6110/1971 or latest & jss/7210-10-dec.-1982 or latest. [ warranty period: 30 months after the date of delivery ] ]
Tender For supplying electrical materials and repair maintenance services at. grampanchayat khalumbre tal khed dist pune - supplying and erecting modulartype switch6a / 10a, supplying and erecting street light bracket for erection ofsingle fitting made from 40 mm. dia b class g.i. pipe 1.0 m in length, providing cement concrete foundation including excavationfor the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm/45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner.(for 8.5 to 9 m poles) (16-3-2), supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation.(weight 101 kg.) as per specification no.oh-pl/stp, supplying and erecting street light bracket made from 25mm. dia b class g.i. pipe, 0.6m. in, supplying and erectingled street light fitting suitable for 36w to 40w led street light, including lamp, with pf > 0.95 class ip 65 ., supplying and erecting led street light fitting suitable for 50w lamp, including lamp, with pf > 0.95 class ip 65., supplying and erecting led street light fitting suitable for 60w lamp, including lamp, with pf > 0.95 class ip 65., supplying and erectingled street light fitting suitable for 90 w led street light, including lamp, with pf > 0.95 class ip 65., supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95,class ip 65, supplying and erecting led flood light fitting of 150w, including lamp, with pf > 0.95,class ip 65, providing rental basis hydraulic bucket vehicle of hight 13 mtr. and weight capacity 200 kg. with driver, oprator and disel etc. for per day basis, labour chrages for led fitting on street light or ms light pole., dismentaling charges -led street light of pole., 1.25 mm crca sheet metal enclosures box for timmer and mcb, supplying pvc insulated pvc round sheathed 1.5 sq.mm, supplying & laying armoured cable 4c x 6 sq.mm., supplying & laying armoured cable 4c x10 sq mm, supplying & laying armoured cable 2c x 10 sq mm, supplying & laying armoured cable 4c x 16 sq mm, supplying, erecting & marking spmcb 6a to 32a, b- series (for lighting) 5-3-3, supplying, erecting & marking dpmcb 6 a to 32 a bseries (for lighting) 5-3-7, supplying and erecting programmable digital almanactimer microcontroller based with real time clock to operate on derived switching on & switching off street light as per daily sunset and sunrise respectively, supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm complete, supplying & erecting crimping type coper lugs for cable upto 1.5 to 6sq mm complete , supplying and erecting two pole power contactor 250v 32a for time switch complete erected on wooden block/provided box, with necessary materials. 4-4-3, supplying & erecting mains with2x1.5 sq.mm f.r copperpvc insulated wire laid in provided conduit/trunking/inside pole., supplying and erecting mains with isi mark wp2 x 6 sq. mm. 1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire no. 8 swg 1-4-3, supplying and erecting mains with isi mark wp2 x 2.5 sq mm. 1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire, supplying and erecting mains with isi mark wp2 x 10.00 sq mm. 1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire, 25 amp, 32 amp three phase l/t contactor, 2.5 sq. mm multistand copper wire, insulation tape, water proof tape, street light pole box frp, cement street light pole clamp, m.s. street light pole clamp, led street light arm bend pipe, small size frp box for mcb, big size frp box for mcb, supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes(dwc) of hdpe for enclosing cable below ground/road surfac
Tender For supply of ground sheet khaki superior quality to is:6110/1971 or latest & jss/7210-10-dec.-1982 or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]
Tender For auction sale of others - scrap cond. abandoned railway quarters, consisting of rcc, brick masonry, doors and window rails, steel, wood, ac sheets. total qty 433 nos. quarters- 1 set. these quantity are only indicative 1) brick masonry approximate qty 3199.385 m3 2) wood 131.221 m3, approximate 3) steel 91590.85 kg, approximate 4)r.c.c. only 1298.88 m3, approximate 5) ac sheet. 4309.25 m2 approximate, 6) wooden/steel door/windows 3640 nos approximate. note 1. any other material found nearby the lot & it will not be delivered.2. delivery will be given on as is where is basis by lot lot 3. it is strictly advised to bidder to see the lot personally before bidding for the lot, any dispute about quantity will not be considered after bidding 4. cutting, dismantling may be allowed for easy loading purpose at the cost and risk of purchaser 5. dismantling permitted up-to ground level only. 6. purchaser should ensure that during cutting dismantling nearby structures building should not be affected. 7. purchaser will be fully responsible for any mishaps. 8. trains operations and other railway work should not be disturbed and suitable banners at work place has to be arranged by purchaser. 9. free delivery up to 80 days is permitted. 10. before delivery, complete removal of rcc, cc, bricks masonry and rubbish from site will be permitted. 11.the land should be cleared of all debris. 12. all pway material, s&t and electrical materials, fencing, fencing gates items true returnable items which are not included in auction and not permitted to take along with other auctioned items, all returnable items which can be transported to depot will be summited in depot .13. material is physically available.14. delivery of lot by texture unit wise "as is where is basis".15. stock holder is responsible for correct identification of material. 16. if any other material except provided in description is found while delivery, which is strictly restricted & it cannot be delivered.17.presently all the quarters are vacant 18. g.i. pipes are returnable items will be submitted in depot (sse (works) office).19. purchaser will be fully responsible for damaging any railway property.
Tender For auction sale of others - description: - scrap and unserviceable masonry structure of abandoned old ce construction office and engineering hall including damaged ac sheet roofing & abandoned building compnents including estimated visible quantities at bilaspur with total plinth area of 1,043.24 sq. meters. remarks - 1) dismantling of the office of old construction, dy. ce office and engineering hall will be done by the purchaser at his own cost and risk and without causing any loss to any railway property. purchaser will demolish and clear up to ground level only. while dismantling explosive should not be used. all the debris, unserviceable materials to be cleared from site to outside railway land by the purchaser. 2) any loss due to theft, accident etc. shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railway. 3) auction components do not include chain link, barbed wire fencing, tie bar panel, pvc doors and asbestos ceiling, water supply fittings, electrical equipment, mirror and glass. the same has to be return back to stockholder/custodian. 4) rail post and purlins are offered for auction. special remarks - 1) due to complexity of lot, free delivery period against this lot will be 80 days as per railway board letter no. 2015/rs(s)/709/5 dated 29/01/16 under chapter no.-7.4. 2) material to be sold on as is where is basis and will be delivered in numbers.
Tender For bid to ras repair, maintenance, and installation of plant systems equipments- frame work: ms / rcc, sheet, repair of control console to arrest ingress of water/ humidity by use of qty 20 rcc blocks of dimension 04 feet x 02 feet x 06 inches (height). 2.2 repair of roof of control console to protect against sun light towards ensuring controlled temperature which is required for electronic equipment held in it. the protective structure would consist of vertical square tubes of dimension 40 x 40 mm and length 128 feet clamped onto the side wall body of the container. a horizontal framework 25 x 25 mm of similar raw material (square tube of dimensions 40 x 40 mm, 178 feet length) shall be fixed onto these vertical rods. 2.3 repair of fuel tank. 2.4 repair of qty 02 mtb side platforms used for inspection and adjustment during ground run/ testing of engine. 2.5 provisioning of consumables for maintenance of dg set of the console.
Tender For supply of black soil treatment to be done by watered and compacted with plate compactor to consolidate the base , excavation of top soil up to depth not exceeding 150 mm deep and getting sift soil , edge wall providing and fixing masonry edge wall 9 inch wide and 12 inch height including grounded around perimeter of court , 01x10 ft x 15 ft shed with 0 point 5 mm ppgl profile sheet fixed on 50 mm ms tube , three seater stainless steel chair with armrest , digital scoreboard 3x2 , two hockey goal post , four pole with led light 100 watt 20 ft height from ground each flood light will have four led light , drainage system for excess water from ground
Tender For supply of site clearance and amp earthwork is 1200 , kero heater , pcc is456 , rcc m20 footing and column and slab , reinforcement steel fe500 , brickwork 230mm is1077 and flooring anti skid , internal plaster 12mm , doors flush and windows alluminum and glass , electrical led and wiring , plumbing and sanitary , ceiling gypsum vip , painting exterior and interior external lighting and poles , water supply tank and pump , transportation and logistics remote area , contingencies and solar panel 5kva and invertor and battery 5kva , generator 5 kva electrical led and wiring is 732 , mirror 5 h 2w ft and bench 5 h 2w ft , chair plastic with arm , toilet sheet western with exhaust fan and water faucet and hand jet assy , electric fitting work , changing room 6 by 6 by 10 ft and bathroom 6 by 6 by 10 f , multipurpose hall structure , chair vip sofa and centre table , podium and tt table and carrom set , yoga mats fire extinguisher , 86 inch interactive pannel , drainage and cement road work tin shed wk on viewer seating iron poles and tin sheet hooks screw and iron channel , ground civil work , excavation work
Tender For providing fixing and installation of fire material for fire station mc patiala. est cost rs. 1.33 lacs dt 22/23.06.2026 - xlpeinsulatedarmouredcables (loose):supply, laying and erection of aluminium conductor xlpe insulated pvc sheathed armoured and served cable 1100 voltsgradeasper is7098 (part-1)1988 tobe laid loose intheexistingtrenchorpipeas per pwd general specifications overall size 35sq.mm (4core) armoured(loose), mccbs (for panels & sheetenclosure):supply and erection of moulded case circuit breaker (panel mounting cubical type) in the existing cubical panel (confirm to iec:60947-2) having ics=100% icu, 100% neutral with spreader terminal links,extendedrotary handle and relevant pwd general specificationscompletewithg.i. bolts, nuts &connection on both sides of mccb with suitable size of thimbles etc:mccbfourpole200amp.,415volts, 25ka fixed magnetic and adjustable thermal setting, sheet metal bus barchambers (copper strips):supply and erection of sheet metal bus bar chamber (factory fabricated) duly powder coated on existing surface with required 4 nos.of tin plated copper bus bar strips of suitable length and cross sectional area mounted on dmc/ smc mouldsat sufficient distance, enclosure made of m.s. sheet 1.6mm thick with hinged cover and lock, fitted with dust excluding gaskets and secured with sufficient no. of cadmiumplated iron screws and of given overall dimensions and to be fixed with g.i.bolts and nuts/ ragbolts and nuts etc. complete with all accessories including connections with suitable size of thimbles, bonding to the existing earth and painting etc. as desired by the engineer-in-charge at site:bus bar chamber 200amp., 415volts overall dimensions (455mm x 455mm x 150mm) nominal, supply and erection of heavy duty aluminium thimbles/lugs for cable endtermination duly crimped including making necessary connectionscompletely aluminium thimble cable core size 2535sq.mm, earthing with g.i.wire/ rope ing.i.pipe partly recessed and partly on surfacecomplete with 150 cm long 50mm dia.g.i. earthpipe (cutting threads and 36 nos. holes, 1cmdia. to makeamesh around the gi pipe) withg.i. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with20kg. charcoal & salt mixture etc., upto 8 metre in length (including boring & refilling). earthing with 8 s.w.g. (4mmdia.)g.i.wirein 15mm dia g.i. pipe with g.i. reducing socket 50mm x 15mm (upto 8metre in length), supply of mccb enclosure in all respects make lk/havells, supply of clump 1" g i, supply of screw 1.5"with gutty
Tender For supply of housing for v-ring. specn / drg no:- clw drg.no.- 1209-01.113-002 alt-8 with latest alteration (conforming to rdso modification sheet no. mp.mod.vl-06.38.09 (rev-0) dated 30.11.09) ground to sketch no-2009-18 [ warranty period: 30 months after the date of delivery ] ]