Latest maximum demand controller Tenders | Government maximum demand controller Tenders

Central Government / Public Sector

CTN :43012852

18 Dec, 2025 5.67 Lacs

Dhanbad - Jharkhand

Tender For corrigendum : tender for supply of procurement of spare of lt vfd at hurl sindri on oem basis : : - dual temperature transmitter, filter capacitor for sine wave fitter, "current transformer ratio 100/1avfd control devicevfd power devicehrc fuse link bs typefuse holders & isolating linkhrc fuse 8s typefuse-link rating-80a, ac 690 v.", fuse base nh din type, output filter ral 7035 size 6 inc, fan failure and temp detection unit, top (intelligent operator panel), "power contactor rating-45a, 230v acsine wave fitter reactor rating-22kw", panel fan, multi-function meter (mfm), 32-50 a, thermal overload relay, circuit breaker with electronic trip, panel door mounted rotary op, handles, d series dc drm relay, d series drm relay socket, 4 contacts, d series ac drm relay, sa, d series ac dirm relay, 10a, d series drm relay socket, 2 contacts, digital indicator (rpm meter), transformer, 415vac/240vac, 500va, auto transformer, 22kva 3 pole, current transducer specs 4-20ma, motor restart timer, green push button & contact block., red push button & contact block, selector switch, 2-way, selector switch, 3-way, blue push button & contact block, yellow push button & contact block, black push button & contact block, fuse terminal, thermostate, high current connectors, 40mm insulator, 30mm insulator, indicating lamp, red, indicating lamp, yellow, indicating lamp, blue, indicating lamp, green, indicating lamp, amber

State Government

CTN :43204049

26 Dec, 2025 4.95 Lacs

Kutch - Gujarat

Tender For supply of routine maintenance items crimping type non-insulated copper pin type terminal end 25 sq.mm , crimping type non-insulated copper pin type terminal end 35 sq.mm , crimping type non-insulated copper pin type terminal end 50 sq.mm , 300 sqmm crimping alluminium type in-line connectors , 240 sq mm crimping type alluminium in-line connector , 185 sqmm crimping alluminium type in-line connectors cat no :hai-11 hex make , aluminium tube terminals185.0 mm2, m10 , aluminium in line connector 70 mm2 , aluminium in line connector120 mm2 , 35mm alluminium in line connector als-2"dowell" , heat shrinkable sleeve for lighting wiring , heat shrinkable , sleeve, size:45mm/18 mm(for 240/300 sq.mm)for 11 kv , 1.1 kv busbar/cable couductor protection heat shrinkable sleeve dia before shrink: 50 mm dia. after shrink: 16 mm for 1.1 kv lt cable , double pole mcb-2a , mcb/dp, 6a , indication lamp , mcb dp 16a ac, c-curve, csmbs2c16 , mcb dp 10a ac, c-curve csmbs2c10 , gls lamp 500 w screw type , plastic dori (sutari) for binding of plastic 0.5 thick &2mm width. , to make panelspare handle cssdf200a-400amp (cswh 145 s 12) , thinner for enamel paint. (tin of 1 ltr.) , multi functional fluid spray oks-601 , carbon cleaner spray , painting brush size 3" (75 mm) , painting brush size-38 mm , wire brush size 12" with wooden handle , washing powder (1 kg pack) , pvc buckets-15ltr , schneider , telemechanique/merlin gerin , make-push button for 22.5 panel , cutout with contact elementtype of contact , :nocolour: yellowreferance , no.:xb5-aa51ntype:spring return , push buttons , oks 2621 safe l.c. spray, contact cleaner spray for live circuits ( 500 ml spray bottel) , flat cable 3 corex4 sqmm with copper conductor for submersible motor , pvc insulated, unsheathed flexible copper cable size 1 core x 2.5 sq. mm, 1100 v grade , auxiliary relay re-300 coil voltage 250v dc , jyoti make re-300 plug in type relay, coil voltage 240 v,50hz ac with led indication & 4 change over contact having 10 amp rating. , tubular spanner set (8 pcs) product no ts 08 taparia make , bimetal mini hole saw cutter complete with arbor, product no- hsm 12, size-12 mm. , bimetal mini hole saw cutter complete with arbor, product no-hsm 19, size-19 mm , bimetal mini hole saw cutter complete with arbor, product no- hsm 22, size-22 mm , bimetal mini hole saw cutter complete with arbor, product no- hsm 29, size-29 mm , bimetal mini hole saw cutter complete with arbor, product no- hsm 35, size-35 mm , bimetal mini hole saw cutter complete with arbor, product no- hsm 44, size-44 mm , oil barrel hand pump , electrical hand blower 800 watt, 230 volt, 50hz , hand grinder machine. , #w963 play safe high voltage tape (25 mm x 0.76 mm x 9.1 mtr) roll , w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll , control transformer, 440v/240v, 250va , on/off selector switch, model: s16-61002-b03, ac23a-10hp make: salzer , on/off selector switch, model: s6-61002-b13, ac21a-440v-6a make: salzer , voltmeter selector switch, model: s10-61100-b13, ac23a-4hp, 440v ac make: salzer , bus selection selector switch, model: s6-61038-b13, ac23a - 3 hp make: salzer , voltmeter selector switch, 6a-vss-b13, ac21a, 440v, 6a make: salzer , local/remote selector switch, model: d16-61040-b63 3.16a, dc22a, l/r=2 m.sec, make: salzer , ammeter selector switch part code-6a-s6-61325-b13-tdyr make -salzer , stanvac pen oil rust remover 6030,500 ml/pac , #901 easyclean (nf) 500 ml. spray canon line electrical contact cleaner.

corporations/Associations/Others

CTN :42721109

30 Dec, 2025 2.21 Crore

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : manufacture, fabrication, supply,erection, testing and commissioning with 1x8 mva pr.tr,stn transformer, associated equipments, accessories, control panels, control room and electrical works at o.krishnapuram in trichy metro under tkc thro e tener - electrical material supply, power transformer 33/11kv, 8mva power transformer with oltc, breaker along with ct for outdoor ss 33 kv (gc) vcb (out door) 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (600-300/1-1a) with structure and complete accessories with breaker platform., 11kv (lv) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulatedwith permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (1200-600/1-1a) with structure and complete accessories with breaker platform., 11kv (feeder) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (400-200/1-1a) with structure and complete accessories with breaker platform., potential transformer 33kv potential transformer with tc (single phase unit), 11kv potential transformer with tc (three phase unit), panels ac panel for 33kv ss, 110 v dc annunciation panel type b, 110v dc indoor c&r panel for gc breaker, 110v dc indoor c&r panel for lv breaker, 110 v dc indoor c&r panel for twin feeder, control cables, junction box and accessories 14c x 2.5 sq.mm copper cable armoured, 8c x 4 sq.mm copper cable armoured, 4c x 4 sq.mm copper cable armoured, 4c x 2.5 sq.mm copper cable armoured, 2c x 2.5 sq.mm copper cable armoured, isi mark 19 / 22 mm cable gland as directed by the field engineer., isi mark 25 mm cable gland as directed by the field engineer., isi mark cable 28 mm gland as directed by the field engineer., lugs, ferrules, sleeves, cable tie, insulation tape and other accessories for providing cable core end termination, supply of gi chequerred plate 6mm thickness, junction box supply of ct/pt junction box made out of 14swg (2mm) m.s.sheet wherever required as directed by the field engineer. the box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials. 400w x 300h x 150d, supply of ac junction box of size 535x310x127mm of 18swg ms sheet including hrc fuse unit-18 nos. should be fitted with base, consumables etc. (the box shall be vermin proof, shall have sturdy hinges and locking arrangements), supply of mounting channel suitable for cbtm 5 terminal block in panel /box as required and as directed by the field engineer., supply of disconnected type terminal block suitable for ct circuits in panels/ box as required & as directed by the field engineer, supply of isi mark bakelite hrc fuse holder with fuse of 2/5/10/16 amps reputed make in panels/ boxes for ac/dc/pt circuits wherever required as directed by the field engineer. 16 amps - fuse holder with hrc fuse, 63amps - fuse holder with hrc fuse, bus & bus materials zebra acsr conductor, 2.0" / 50 mm aluminium bus bar (thickness:5 mm), 22/33 kv pt insulators, 11kv pt insulator, 11kv, 120kn disc insulators (antifog), strung bus eye bolt of 18 - 20 mm dia gi rod of required length suitable for 33kv, 22kv and 11kv strung bus including cost of gi rod and 2nos gi nuts & washer as directed by the field engineer., clamps and connectors tension fitting clamp 4 bolted for zebra, t clamp for 2" bus to single zebra, t clamp for zebra to zebra, switchend clamp for single zebra, switchend clamp for 2" busbar, reducer clamp for 2" bus to zebra, pg clamp for zebra, free end clamp for 2"busbar, corana bell for 50mm bus bar, switch end clamp for mink, seating block for 2" bus bar(for g

CTN :42902911

18 Dec, 2025 58.07 Lacs

Samastipur - Bihar

Tender For corrigendum : supply of establishment of the soil bin laboratory facility at caet rpcau pusa d d - soil bin control room for instruments control panel , soil processing trolley , test trolley , hydraulic control unit , rope drum wire rope pulley for trolley movement , ac motor controller and control panel , induction motor with controller for rotary tiller on processing test trolley , induction motor with controller for disk plough on test trolley , wiring of electrical and instrumentation devices , force transducer , data acquisition system , cone penetrometer with force transducer , torque transducer , proximity switch , inductive displacement transducer , rotary encoder , power supply , digital tachometer , moisture meter , strain gauges , desktop computer with laserjet printer and ups , mechanical fabrication installation and commissioning charges , transportation

CTN :42582831

17 Dec, 2025 NA

Bangalore - Karnataka

Tender For bid to ras supply of comprehensive amc for critical non-it infrastructure at beml dc & dr for 5 years - services to be covered for safety & security systems: , access control system , fire panel system: , cctv system , water leakage detection system & rodent repellent system: , vesda system: , scope of work for comfort ac , scope of work for switches

CTN :43047267

18 Dec, 2025 NA

Parganas - West Bengal

Tender For corrigendum : tender for supply of crankshaft machining , seal front oil , hub flywheel , rod push , housing flywheel , spring valve , pedestal , bracket engine lifting , manifold air induction turbo , heater air intake 12v , pump water assembly , housing thermostat , pump oil , seal oil-pick-up , switch oil pressure , cooler oil 6 plate , retainer fuel filter , pump lift , rod push , pipe filter , pipe lift pump to filter , leak off circuit pipe , cover fuel injectors , adjuster autotensioner , turbocharger 68kw (ac) t3 , adaptor tube , pipe oil feed , starter motor 12v , mat enforcement , cap blanking steel 3 by 4 inch bsp , stabiliser ram right hand , hose hybrid righthand , outer , pin pivot , mounting filler tube , grill lefthand , grill righthand side , latch bonnet , bonnet , cable wire , 1000mm , panel side grill lh , panel side grill , rh , plate compression , stopper plate , mount roof liner , assembly , rear , liner roof , spring door stay , leftside , bracket door stay , lh , stay door , rightside , bracket door stay , rightside , pressing mounting lh gas strut , pressing mounting rh gas strut , guard door striker , door painted & sealed left hand , door handle left side , door rightside , latch assembly inner , right hand , window frame right hand , seal window right hand side , glass leftside quarter light , glass rightside quarter light , glass tinted leftside 1 by 6 , glass tinted rightside1 by 6 , window gasket left hand side , window gasket right hand , seal top corner right hand , seat operator , fan face , mounting bracket fan , ram shovel , pin pivot , bearing liner , pin pivot , pin pivot 45 x 290mm , pin pivot , guide hose lh , guide r h , tube wear nylon , bracket mounting fire extiguisher , harness wiring chassis , harness roof , mat rubber , knob screw , harness maxi fuse , tail lamp leftside , tail lamp rightside , switch 12v , instrument cluster , light cluster warning , actuator 4wd switch , switch brake , switch brake light , arm wiper blade assembly , joint universal , bearing , spring tension brake pedals , lever - gear basic , knob with switch , plate retaining gaiter , pivot cable , steering shaft keyway , cover steering column front , hose , 3 by 8 bsp , 1000 , hose 10 bsp hp 560mm lvb to wa feed pipes , hose spiral , port adaptor , pipe slew , hose , hose 10 bsp hp 2390mm b bottom port , hose high pressure , bearing ball , kit-seal , valve main relief 227 bar , kit-seal , steering hydrostatick , kit-seal power track rod ram 75mm cyl x 45mm rod , piston rod , kit seal , ram slew refer page no. 657 , kit seal , cylinder , seal kit , kit seal , bush cylinder , kit seal , seal , ring packing , bearing taper roller , carrier wheel bearing 5 stud , kit-spacer , bearing taper roller , gear crownwheel & pinion 13 by 38 teeth , gear annulus ring , driveshaft , bearing taper roller , ring backup , kit-gear differential , driveshaft rear , ss700 , sideshift , valve solenoid assembly , solenoid assembly-3 way , gear 3rd 33t-3.5m , synchroniser , bearing , bearing 35 x 73 x 24 , gear 2nd 40t ss700 , pump assembly transmission , spring , seal rear , bearing needle roller , baffle , seat gearshit ball , seal ring (turquoise) , plate pressure 4mm , plate baffle , oil , plate oil baffle , filler filler tube , reservoir brake , pipe servo link , brake hose 1 by 4 x580m , bracket throttle , hose , strap air filter mounting , base pre-cleaner , element air , main , lead grid heater positive feed , lead grid heater positive feed , relay grid heater12 volt , unit ecu cold start , harness gird heater control , harness grid heater , hose top , hose bottom , bracket side panel mounting , bracket side panel mounting , fan 21 inch diameter 9 blade puller , bracket idler non-ac , bearing idler pulley , fuel line tank to water sepera , filter fuel assembly , baffle prefilter , bracket , hose water seprator , valve non-return , hose - 400mm , pivots clam jaw , hose , pin pivot , cap pipe , ram bucket 100x45 , ram

corporations/Associations/Others

CTN :42905157

22 Dec, 2025 NA

Cuddalore - Tamil Nadu

Tender For corrigendum : supply of sc050330064 abb plc spares abb s800 io tu8 18 base compact mtu 50v base module of abb plc , sc050330067 abb plc spares abb ai810 analog input module 1 x 8 ch , sc050330065 abb plc spares abb s800 io tu581 basecompact mtu 250v base module of abb plc , sc050330072 abb plc spares abb do818 digital output module 24v dc 32 ch , sc050330070 abb plc ci854ako1 master profibus communication interface module , sc050330071 abb cp676 process panel cp676 control panel 15 tft touch screen , sc050330069 abb plc spares abb di 828 digital input module 120v ac dc 16 channel , sc050330066 abb plc spares profibus dp vi communication interfaceci840 a , sc050330068 abb plc spares tu 847 module terminal unit mtu for ci 840

CTN :43144771

26 Dec, 2025 NA

Choudwar - Odisha

Tender For supply of ohm meter , ac voltmeter , milli voltmeter , ammeter mc , ac ammeter , kilo wattmeter , digital wattmeter , ac energy meter single phase , ac energy meter three phase , power factor meter digital , frequency meter , magnetic flux meter , lux meter , tachometer , tong tester , megger , dc starter , wheat stone bridge , single phase variable auto transformer , phase sequence indicator , growler , ac starters , soldering iron , temperature controlled , discrete component trainer , linear ic trainer , domestic appliance , oil testing kit , inverter with battery , voltage stabilizer , dc power supply , battery charger , current transformer , potential transformer , solar panel with battery , computer , laser printer , dc shunt generator , motor generator ac to dc , dc compound generator with control panel , dc series motor coupled , dc shunt motor , dc compound motor with starter , motor generatordc to ac , ac squirrel cage motor with star delta starter , ac phase wound slip ring motor with starter , universal motor with starter switch , synchronous motor with accessories , thyristor igbt controlled , thyristor igbt controlled ac motor drive , single phase transformer core type air cooled , three phase transformer shell type oil cooled with delta star , ac series type motor , single phase capacitor motor with starter , manual motor coil winding machine , ceiling fan coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger home

CTN :43140429

25 Dec, 2025 34.90 Lacs

Khetri - Rajasthan

Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c

CTN :43123457

31 Dec, 2025 1.38 Crore

Chittoor - Andhra Pradesh

Tender For tender for supply of supply , installation , testing , and commissioning of 60 kw dc fast charger (dual gun) , providing cms software integration services for one time etc. as required. , providing services of control monitoring solution (cms) subscription for per year per charger etc. as required. , supply , installation , testing , and commissioning of 30 kw dc fast charger , providing cms software integration services for one time etc. as required. , providing services of control monitoring solution (cms) subscription for per year per charger etc. as required. , supply , installation , testing , and commissioning of 7.4 kw ac charger , providing cms software integration services for one time etc. as required. , providing services of control monitoring solution (cms) subscription for per year per charger etc. as required. , supplying of following sizes of pvc insulated and pvc sheathed xlpe copper conductor armoured cable 3.5 c x 50 sq mm , supplying of following sizes of pvc insulated and pvc sheathed/ xlpe copper conductor armoured cable 3.5 c x 25 sq. mm , providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in cubicle panel board 200 a , 36ka , fpmccb , providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in cubicle panel board 32 a , 36ka , fpmccb , providing and fixing earthing with copper earth plate including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe. , providing and fixing copper strip in g.i. pipe from earth electrode including connection with brass nut , bolt , spring , washer excavation and re-filling etc. as required. , providing and fixing copper strip on surface or in recess for connections etc. as required. , providing and fixing gi wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. , supplying and making end termination , supplying and making end termination , laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of following size in the existing hume/rcc/hdpe/dwc pipe etc as required. upto 35sqmm , laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of following size in the existing hume/rcc/hdpe/dwc pipe etc as required. above 35 sq. mm and upto 95 sq. mm , supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket , bend , couplers etc. 63 mm dia (od-63 mm & id-51 mm nominal) , supply , installation , testing , and commissioning of civil works.

Maximum Demand Controller Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

corporations/Associations/Others

corporations/Associations/Others