Latest measure tape Tenders | Government measure tape Tenders

State Government

CTN :45509163

17 Jun, 2026 1.68 Lacs

Faridabad - Haryana

Tender For hew 188 supply of rubber hose pipe 1 inch dia isi mark heavy duty, double threaded form requted make firm in sector-2, faridabad.

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

State Government

CTN :45533039

19 Jun, 2026 84.3 Thousand

Kannur - Kerala

Tender For deposit gst officeproviding plat form for generator

State Government

CTN :45523329

22 Jun, 2026 29.14 Lacs

Srinagar - Jammu And Kashmir

Tender For improvement upgradation of link road form pmgsy road to khati mohalla poshkar via pdc canal by way of macadamization under cnt machine mix laid with paver

State Government

CTN :45523337

22 Jun, 2026 38.84 Lacs

Srinagar - Jammu And Kashmir

Tender For improvement upgradation of kangan panzin road form km ist by way of macadamization under cnt machine mix laid with paver

State Government

CTN :45523339

22 Jun, 2026 38.88 Lacs

Srinagar - Jammu And Kashmir

Tender For improvement upgradation of road form playground mammer to steel bridge thune from rd500 mtr by way of macadamization under cnt machine mix laid with paver

State Government

CTN :45516075

22 Jun, 2026 6.90 Lacs

Ferozepur - Punjab

Tender For providing and supplying furniture in integrated public health lab at district hospital ferozepur civil works furniture - almirah 20 gauge sheet heavy duty made with ms sheet size 36x78x18 duly powder coated with multipurpose shelves, heavy lock superior quality, table size 6x3 made with 19 mm thick ply + 1mm sunmica with 1 side drawer and cabinet duly polished heavy locks with footrests, counter size 8x2 operate for 2 persons made with19 mm ply + 1mm sunmica with footrests and shelves for documents with one drawer for each person, waiting area chair 3 seater- supplying & placing three seater bench. the seat and back shall be made up of high quality cold rolled ms perforated sheet of 1.2mm thick, pressed and welded to form the shape. the seat and back electrostatically coated with epoxy powder and then cured under heat to allow it to form a skin. the armrest shall be made up of mild steel powder coated tube with 1.2mm thick. the base structure shall be supported by ms powder coated with 40-60 (dft). there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 440 10 mm(d) x 405 10 mm(h) from ground. overall height shall be = 775 10 mm, overall depth = 710 10 mm & overall width = 1765 10 mm., revolving chairs long back with tilt mechanism with arm rest(leather finished, hydraulic, with five castors, nickle polish base)

State Government

CTN :44055546

23 Jun, 2026 NA

Kheda - Gujarat

Tender For corrigendum : supply of various consumable items for unit 1 to 7, wtps. - fevicol sr 998 (200 ml/tin), fevi bond, champion teflon tape roll size 1/2"x12 mtr, hss hacksaw blade size 300x12.5x0.63 mm, oks contact cleaner [ 2621 /2 ] size 500 ml [ 275 gms ] spray bottleman u oks speciality lubricants { india } pvt. ltd., red oxide, light gray paint size 4 liters light gray paint size >> 1 liter., rustolene, pvc adhesive insulation tape roll size 1.9 cm x 10 mtr x 0.125 mm thick, wd 40 size 340 gms spray bottle manu hardcastle & waud mfg . co . ltd, pin terminal 1.5 mm2, pin terminal 2.5 mm2, fork terminal insulated 1.5 mm2, u type copper lug 2.5 sq.mm, 2.5 mm2 round lugs, ring terminal 1.5 sqmm, emery paper smooth fine size 38 mm x 50 m length, emery paper rough sizesize 220 x 280 mm, stanvac pen oil rust remover 6030,500 ml/pac, hack saw blade [ high speed steel ] size 300 mm x 25 x 1 . 25 mm make miranda, cable lugs 0.5 mm2 pin type, dowells make, cable lugs 0.5 mm2 u - type, dowells make, pvc insulated copper unshethed flexible wire 1.5 sqmm,1100 v, pvc insulated, unsheathed flexible copper cable size 1 core x 2.5 sq. mm, 1100 v grade, seamless copper tube -size: 3/8 inch od x 18 swg thickness withstand capacity: 1000 psi ., 1/4 inch od, 18swg thick, anneled pvc sheathed seamless copper tube having minimum 15 meter long, seamless tube a 213 tp316 1/4 inch od x 2.1mm thick, m.seal putty fast curing 100 gms/pack, molykote 1000 (1kg/tin), molykote 1000 spray can (400ml/270gms/can), pvc insulated copper unshethed flexible wire 1.0 sqmm,1100v, copper armoured,flexible power cable 3cx1.0 sq. mm., tube cutter, tube bender, copper cable 3 corex2.5 sqmm, power cable 3 corex1.5 sqmm, crc-226 contact cleaner in 415 ml/300 gram spray bottle., puff seal have polyurethene based foam sealing compound, cable tie for electricals wires & cables., test leads (probes) for digital multimeter, hand drill machine size 13mm, long rang rechargeable torch with charger., rechargeble torch, carbon cleaner spray, fevi kwik tube 3 grams, 16 amp 240 volt, 3 pin plug top, araldite 180 gram/tube, digital vernier calipers size - 0-300 mm mitutoyo make, digital vernier caliper, size - 0-150 mm, freemans make measure tape 15 metre long, fevicol sr 998 (200 ml/tin), fevi bond, champion teflon tape roll size 1/2"x12 mtr, hss hacksaw blade size 300x12.5x0.63 mm, oks contact cleaner [ 2621 /2 ] size 500 ml [ 275 gms ] spray bottleman u oks speciality lubricants { india } pvt. ltd., red oxide, light gray paint size 4 liters light gray paint size >> 1 liter., rustolene, pvc adhesive insulation tape roll size 1.9 cm x 10 mtr x 0.125 mm thick, wd 40 size 340 gms spray bottle manu hardcastle & waud mfg . co . ltd, pin terminal 1.5 mm2, pin terminal 2.5 mm2, fork terminal insulated 1.5 mm2, u type copper lug 2.5 sq.mm, 2.5 mm2 round lugs, ring terminal 1.5 sqmm, emery paper smooth fine size 38 mm x 50 m length, emery paper rough sizesize 220 x 280 mm, stanvac pen oil rust remover 6030,500 ml/pac, hack saw blade [ high speed steel ] size 300 mm x 25 x 1 . 25 mm make miranda, cable lugs 0.5 mm2 pin type, dowells make, cable lugs 0.5 mm2 u - type, dowells make, pvc insulated copper unshethed flexible wire 1.5 sqmm,1100 v, pvc insulated, unsheathed flexible copper cable size 1 core x 2.5 sq. mm, 1100 v grade, seamless copper tube -size: 3/8 inch od x 18 swg thickness withstand capacity: 1000 psi ., 1/4 inch od, 18swg thick, anneled pvc sheathed seamless copper tube having minimum 15 meter long, seamless tube a 213 tp316 1/4 inch od x 2.1mm thick, m.seal putty fast curing 100 gms/pack, molykote 1000 (1kg/tin), molykote 1000 spray can (400ml/270gms/can), pvc insulated copper unshethed flexible wire 1.0 sqmm,1100v, copper armoured,flexible power cable 3cx1.0 sq. mm., tube cutter, tube bender, copper cable 3 corex2.5 sqmm, power cable 3 corex1.5 sqmm, crc-226 contact cleaner in 415 ml/300 gram spray bottle., puff seal have polyurethene based foam sealing compound, cab

Central Government/Public Sector

CTN :45521809

15 Jun, 2026 NA

Delhi - Delhi

Tender For quotations for the printing & supply of stationery items single entry debit voucher , without client s advice , single entry credit voucher , without client s advice , account opening form , (fixed/recurring deposit) , account opening form , (individual) , account opening form (non , individual) , atm application form , pay-in-slip of cheque/cash , application form , draft/mc for , rtgs/neft/ , safe deposit vault (locker) , account opening form , locket sheet , note slip , dak envelope , security documents , envelope , computer pass book sb , account , specimen signature card , withdrawal form , soft file , hard file , hard file , voucher cover card , spiral note pad , fd cover , multi purpose form- service , request form , scra pad , form 15 g h , form 97 , pay-in-slip dd/mt/tt , etc. , loan sanction , register , cash detail book , cheque returning , register , dispatch register , dak receipt , register , title deed register , description of , security paper , register for , security , cash remittance , drawing power , voucher register , attendance , register , ,

Central Government/Public Sector

CTN :43400152

15 Jun, 2026 2.35 Lacs

Surat - Gujarat

Tender For bid to ras providing of paper-based printing services - printing with material; screening register; offset,non paper printing services - quantity based - flex & banners; digital; plastic,paper-based printing services - printing with material; rbsk birth defect register at the delivery points (other); offset,paper-based printing services - printing with material; rbsk screening reporting & refferall form for birth defect at delivery point; offset,non paper printing services - quantity based - flex & banners; digital; visible birth defect (formsheet) poster at the delivery point

Measure Tape Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors