Latest measurement board Tenders | Government measurement board Tenders

CTN :41037095

28 Aug, 2025 14.03 Lacs

Baran - Rajasthan

Tender For corrigendum : supply of lt miscellaneous items for lt switchgear/lt system for the year 2024-25, unit5&6, csctpp, chhabra against tn-sc-598/2025-26 (mm) - air flow sensor sl0101, control supply -230v ac, with 1 no +1nc contact, makeifm, or equivalent dynamic braking resistor 13, ohms/ 9600w, 10% ed, 10, sec. max, ambient 50, degree,make-iresco/equi, or equivalent, fan: axial, dia: 250, 230vac,, 50hz, 115w, air flow:1610, m3/h (specification attached at, annexure-i), fan: axial, dia: 450, 415 vac,, 50hz,480 w, air flow:4530, m3/h,speed-1360 rpm,, (specification attached at, annexure-ii), fan axial 08" ball bring, 230v ac 1p-50hz (as per, annexure-iii ), relay assly : 4 relay, 2 c/o,, 5a/24v dc, with led, indication, iron core reactor 3 phase,, 0.359mh/45a, 3 ph iron core, 117 uh/240a,, make: rishab/, transformer/epi/equi or, equivalent, 3 ph iron core, 67 uh/240a,, make:rishab/, transformer/epi/equi or, equivalent, 3 phase line choke ,in-21, amp,inductance-4.2mh,class-, f,freq-50hz,voltage-415v, 3 phase line choke ,in-21, amp,impedance-3%,class-, f,freq-50hz,voltage-415v, ct: metering 250/5a, 15va,, class 1, ct dim.: 180{w},, 100{d}, 70{h}, window, size:20x35mm, front terminals,, resin, cast, insulation class:e,, type 2, colour:yellow, resin cast insulaed c.t, 400/5a,class-1,va-10, resin cast insulaed c.t, 400/1a,class-1,va-10, thermal overload relay range, 95-120 a, 125hp three phase submersible, pump star delta starter with 3-, position selector switch (with, auto switch), single phase, preventer, current overload, protection with short circuit, protection., aluminium ring type, terminal lugs conforming to, is-8337/is-5082 ,iec-, 61238,for voltage rating 1.1, kv, sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, 35 sq.mm, 50 sq.mm, 70 sq.mm, 95 sq.mm, 120 sq.mm, 150 sq.mm, 185 sq.mm, aluminium pin type terminal, lugs conforming to, is-8337/is-5082 ,iec-, 61238,for voltage rating 1.1, 10 sq.mm, 16 sq.mm, 35 sq.mm, copper ring type terminal, lugs conforming to, is-8337/is-5082 ,iec-, 61238,for voltage rating 1.1, kv, 1.5 sq.mm, 2.5 sq.mm, 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, power terminals mounting on, din conforming iec 60947-7-, 1,voltage rating-1 kv,safe for, fingers., current rating-140 a, 35, sq.mm,3 nm, current rating-192 a, 70, sq.mm,6 nm, current rating-232 a, 95, sq.mm,6 nm, copper pin type terminal, lugs conforming to, is-8337/is-5082 ,iec-, 61238,for voltage rating 1.1, kv, 1.5 sq.mm, 1.5 sq.mm(hollow type), 2.5 sq.mm, 2.5 sq.mm(hollow type), 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, type terminal lugs, conforming to is-8337/is-5082, 61238,for voltage, rating 1.1 kv, 1.5 sq.mm, 2.5 sq.mm, 6 sq.mm, terminals blocks (melamine, housing) khaki color, 32 amp., 600v, 10-, 20awg, screw type, din, mounting, 41 amp., 800v, 08-, 20awg, screw type, din, mounting, mm, 125 amp., 750v,, type, din mounting, mm, 32 amp., 800v,, 20awg, stud type,, connection, clip on din, mounting, mm, 125 amp., 1000v,, on din mounting, make grey colour, screwless , spring clamp,, polyamide terminals for, interpanel wiring ,, terminal:769-251, female, 769-102 with add-on, timing, 2co,0.1s…100h,ondelay,, 230v ac, voltage-transducer, suitable for, 24v dc power supply,i/p:0-, 500v ac,dual o/p(4-20ma),, din rail mounted,, shunt resistor,, 750a/60mv,0-60mv, shunt resistor,, 175a/60mv,0-60mv, shunt resistor,, 200a/60mv , 0-60mv, thermal overload relay,1.6a-, 2.5a, 3 pole, bi - metallic,, 1 no + nc,, thermal overload relay,16a-, 25a, 3 pole, bi - metallic, 1, no + nc,, ac axial fan230 vac,50/60 hz, 6"172x150x51 mm(model no, rec-21725b2w) rexnord, make or equivalent for 1:1, replacement, ac axial fan230 vac,50/60 hz, 4"120x120x38 mm(model no, rec-22038 a2t) rexnord, make or equivalent for 1:1, replacement, transformer protection relay,i/p-, 4 nos of rtd sensors(pt-100),3, no of set points,0-300, temperature indication, range,o/p-four relay, contacts(01 c/o contacts),one, analog 4-20 ma output, contacts ,aux supply -90-270, v ac/dc,pecon make ,model, no-tr-7570 or eq

CTN :41042526

29 Aug, 2025 14.03 Lacs

Chhabra - Rajasthan

Tender For corrigendum : supply of lt miscellaneous items for lt switchgear lt system for the year 2024-25 unit 5 and 6 csctpp chhabra - air flow sensor sl0101, control supply -230v ac, with 1 no +1nc contact, make-ifm or equivalent, dynamic braking resistor 13 ohms/ 9600w, 10% ed, 10 sec. max, ambient 50 degree,make-iresco/equi or equivalent, fan: axial, dia: 250, 230vac, 50hz, 115w, air flow:1610 m3/h (specification attached at annexure-i), fan: axial, dia: 450, 415 vac, 50hz,480 w, air flow:4530 m3/h,speed-1360 rpm,(specification attached at annexure-ii), fan axial 08" ball bring 230v ac 1p-50hz (as per annexure-iii ), relay assly : 4 relay, 2 c/o, 5a/24v dc, with led indication, iron core reactor 3 phase, 0.359mh/45a, 3 ph iron core, 117 uh/240a, make: rishab/ transformer/epi/equi or equivalent, 3 ph iron core, 67 uh/240a, make:rishab/ transformer/epi/equi or equivalent, 3 phase line choke ,in-21 amp,inductance-4.2mh,class-f,freq-50hz,voltage-415v, 3 phase line choke ,in-21 amp,impedance-3%,class-f,freq-50hz,voltage-415v, ct: metering 250/5a, 15va, class 1, ct dim.: 180{w}, 100{d}, 70{h}, window size:20x35mm, front terminals, resin, cast, insulation class:e, type 2, colour:yellow, resin cast insulaed c.t 400/5a,class-1,va-10, resin cast insulaed c.t 400/1a,class-1,va-10, thermal overload relay range 95-120 a, 125hp three phase submersible pump star delta starter with 3-position selector switch (with auto switch), single phase preventer, current overload protection with short circuit protection., aluminium ring type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, 35 sq.mm, 50 sq.mm, 70 sq.mm, 95 sq.mm, 120 sq.mm, 150 sq.mm, 185 sq.mm, aluminium pin type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 10 sq.mm, 16 sq.mm, 35 sq.mm, copper ring type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 2.5 sq.mm, 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, power terminals mounting on din conforming iec 60947-7-1,voltage rating-1 kv,safe for fingers., current rating-140 a, 35 sq.mm,3 nm, current rating-192 a, 70 sq.mm,6 nm, current rating-232 a, 95 sq.mm,6 nm, copper pin type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 1.5 sq.mm(hollow type), 2.5 sq.mm, 2.5 sq.mm(hollow type), 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, copper u type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 2.5 sq.mm, 6 sq.mm, terminals blocks (melamine housing) khaki color, 4 sq. mm, 32 amp., 600v, 10-20awg, screw type, din mounting, 6 sq. mm, 41 amp., 800v, 08-20awg, screw type, din mounting, 6-35 sq. mm, 125 amp., 750v, screw type, din mounting, 1.5-4sq. mm, 32 amp., 800v, 08-20awg, stud type, bolt connection, clip on din mounting, 35-50sq. mm, 125 amp., 1000v, clip on din mounting, wago make grey colour screwless , spring clamp, polyamide terminals for interpanel wiring , terminal:769-251, female plug:769-102 with add-on, modular timing relay,5a,2co,0.1s 100h,on-delay,230v ac, voltage-transducer, suitable for 24v dc power supply,i/p:0-500v ac,dual o/p(4-20ma), din rail mounted,, shunt resistor, 750a/60mv,0-60mv, shunt resistor, 175a/60mv,0-60mv, shunt resistor, 200a/60mv , 0-60mv, thermal overload relay,1.6a-2.5a, 3 pole, bi - metallic, 1 no + nc,, thermal overload relay,16a-25a, 3 pole, bi - metallic, 1 no + nc,, ac axial fan230 vac,50/60 hz 6"172x150x51 mm(model no rec-21725b2w) rexnord make or equivalent for 1:1 replacement, ac axial fan230 vac,50/60 hz 4"120x120x38 mm(model no rec-22038 a2t) rexnord make or equivalent for 1:1 replacement, transformer protection relay,i/p-4 nos of rtd sensors(pt-100),3 no of set points,0-300 temperature indication range,o/p-four relay contacts(01 c/o contacts),one analog 4-20 ma output contacts ,aux supply -90-270 v ac/dc,pecon make ,model no-tr-7570 or equivalent for 1:1 replacement, add-on auxilia

CTN :41483985

29 Aug, 2025 NA

Bareli - Madhya Pradesh

Tender For corrigendum : supply of measurement board

CTN :41498790

29 Aug, 2025 NA

Bareli - Madhya Pradesh

Tender For supply of measurement board

CTN :41368250

19 Aug, 2025 NA

Bareli - Madhya Pradesh

Tender For corrigendum : supply of measurement board - rmu101, part no: 3hac044168-001- make-abb [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :41481943

12 Sep, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply, installation & commissioning of ohe high volatge presence/absence detection and indication system

Central Government/Public Sector

CTN :41420842

21 Aug, 2025 NA

Mumbai - Maharashtra

Tender For supply of relay & indication card for 1.6 amp 24 v [relay & indication card for 1.6 amp 24 vdc system voltage of fuse circuit for fuse auto changeover system for 32 nos. as per rdso spec. no. rdso/spn/209/2012 ver-2 and as per s&t spec. no. by/s&t/spn/pdc/02-b/1. material should be supplied from rdso approved source only. ]

CTN :39038232

30 Aug, 2025 13.18 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin mechanic motor vehicle (mmv) tradeat iti tarsali, gujarat, india (package 3: mmv trade) - alternator assembly used for lmv working condition demonstration kit , starter motor assembly used for lmv working condition demonstration kit , electronic engine control module , fuel pump for mpfi working condition demonstration kit , inline fuel injection pump and rotor type fuel injection pump , demonstration board of 2wheeler ignition system. , demonstration board of electronic ignition system. , working condition of petrol mpfi engine assembly with fault simulation board , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , demonstration board of mpfi system , ultrasonic injection cleaning equipment , working model of power windows , petrol engine motorcycle/scooter along with special tools and accessories , four stroke multi cylinder diesel engine in working condition , four stroke four cylinder crdi diesel engine in working condition , functional/experiment model of different type of sensors. , auto electrical test bench , cut section model of mock layout of a motor car -electrical system - working model , cut section working model of single plate clutch assembly. , cut section working model of diaphragm clutch assembly. , cut section working model of centrifugal clutch assembly. , front axle ( rezeppa joint) with stand for dismantling and assembly , rear axle with stand for dismantling and assembly , cut section model of synchronous gear box working , cut section model of sliding mesh gearbox working , cut section model of constant mesh gearbox working , full floating axle and semi- floating axle assembly , cut section working model of automatic transmission gear box , steering assembly - , 1. rack& pinion, , 2. worm& roller , 3. recirculating ball , 4. power steering , wheel alignment set up instrument-computerized , brake testing equipment (to test efficiency of vehicle where motion after braking is plotted) , motor vehicle in running condition (diesel heavy) with hydraulic power steering , light motor vehicle diesel crdi with electronic power steering and car a/c , engine dynamometer , four stroke multi cylinder engine mpfi petrol with cng kit set up in running condition , four cylinder four stroke diesel engine test rig with rope brake dynamometer , exhaust gas analyzer - diesel , training setup for adas systems , 4-wheel alignment set & hoist with advanced driver assistance systems (adas) complete frame targets , steel toolbox with lock and key (folding type) , punch letter , outside micrometer (0 – 25) , outside micrometer (25 – 50) , outside micrometer (50-75) , outside micrometer (75-100) , inside micrometer (25-50) , depth micrometer (0-25) , thread micrometer , adjustable micrometer sprit level to measure flatness, indication and taper with prismatic measuring base , vernier caliper , digital vernier caliper , vernier depth gauge , vernier bevel protractor, least count 5minutes , telescope gauge , dial test indicator plunger type (complete with clamping devices and stand) , universal surface gauge , cylinder bore gauge , compression testing gauge suitable for petrol engine. , vacuum gauge , granite surface plate , work bench , spanners socket with speed handle, t-bar, ratchet and universal , magneto spanner set , cylinder ridge cutter , vice grip pliers , torque wrenches , pneumatic tools set , car jet washer , pipe flaring tool , pipe cutting tool , universal puller for removing pulleys, bearings , stud extractor set of 3 , stud remover with socket handle , paraffin pressure gun , hand reamers adjustable , straight edge gauge , straight edge gauge , ladle , electric soldering iron , wire gauge (metric) , digital multi meter, 3 % digit (min), diode test mode and continuity mode, , growler , hydrometer , battery analyzer with printer , carburetor - solex, mikuni for dismantling

State Government

CTN :41333626

29 Aug, 2025 2.18 Crore

Udaipur - Rajasthan

Tender For corrigendum : purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen