Latest measuring wheel Tenders | Government measuring wheel Tenders

CTN :45714940

07 Jul, 2026 NA

Delhi - Delhi

Tender For supply of gymnastic mat with non tearing cover 2 mtr x 1 mtr x 50mm , crash mat 3 mtr x 2 mtr x 50 cm , vertical rope 102 mm , horizontal rope 1 quality , road measuring wheel

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

State Government

CTN :45696641

10 Jul, 2026 3.44 Lacs

Anuppur - Madhya Pradesh

Tender For supply of fine chemicals and labware for nabl accredition at chemical laboratory, atps, mppgcl, chachai.- regular laboratory testing chemicals, sodium sulphite (500gm/bottle), 1-amino-2-hydroxy-4-naphthalenesulfonic acid for analysis (50 gm/bottle), sodium bisulphite sq (500 gm/bottle), sodium chloride er (500 gm/bottle), sodium hydroxide pellets er (500 gm/bottle), sodium sulphate anhydrous er (500 gm/bottle), sodium sulphide sq (500 gm/bottle), edta disodium salt er (500 gm/bottle), ammonium chloride emparta (500 gm/bottle), ammonia solution 25% er (500 ml/bottle), ammonium purpurate sq (5g/bottle), calcium carbonate sq (500 g/bottle), magnesium chloride er (500 g/bottle), megnisium sulphate er (500 g/bottle), hydroxyl amine hydrochloride (100 g/bottle), pattens & reader (5 g/bottle), ethylene glycol for analysis emparta (500 ml/bottle), eriochrome black t (25 g/bottle), triethanol amine sq (500 ml/bottle), ethanol absolute for analysis emparta (1000 ml/bottle), oxalic acid er (500 g/bottle), ferrozine (1 g/bottle), acetic acid glacial 100% for analysis emparta (500 ml/bottle), iron standard solution traceble to srm from nist (500 ml/bottle), hydrochloric acid (500 ml/bottle), bromine for analysis (100 ml/bottle), ammonium molybdate (100 g/bottle), sodium meta silicate nanohydrate (250g/bottle), labware laboratory item, volumetric pipettes (1 ml), volumetric pipettes (5 ml), mohar pipettes (2 ml), volumetric flask (100 ml), nessler cylender (100 ml), retort stand, pp base with ss rod (22x15 central), narrow mouth wash bottle with long stem nozzle ldpe (1000 ml) 6 pcs/pack, burette clamp, pp (double) 06 pcs/pack, measuring cylinder class a, pmp (100 ml), silicone pipette filler bulbs (5 ml), silicone pipette filler bulbs (10 ml), silicone pipette filler bulbs (25 ml), test tube holders, crm material, buffer solution (boric acid/potassium chloride/sodium hydroxide), traceable to srm from nist and ptb ph 4.00 (250c) certipure 900 ml pack (30 pouch/pack), buffer solution (boric acid/potassium chloride/sodium hydroxide), traceable to srm from nist and ptb ph 7.00 (250c) certipure (900 ml pack) (30 pouch/pack), potassium chloride solution (c=0.001 mol/l certified ref. material for measurement of eloctrolytic conductivity (0.147 ms/cm)-traceable to srm from nist (900 ml pack) (30 pouch/pack), silica standard solution, 10 mg/l sio2 (nist) (500 ml/bottle)

Central Government/Public Sector

CTN :45698303

02 Jul, 2026 NA

Mumbai - Maharashtra

Tender For wheel distance measuring gauge, capable of measuring wheel distance with the accuracy of+/- 0.1 mm with vernier scale supplied in light weight, nicely finished wooden storing & transportation box with carrying handle. make-pie, bpi or tesa only with tender specific authorisation. specifications:- measuring ranges: 1590 mm to 1610 mm, 0 set at standard setting: 1600 mm or 1596 mm, measuring accuracy: +/- 0.1 mm, least count : 0.1 mm. along with 1) calibration certificate from government approved laboratory & 2) warranty certificate: at least 12 months from the date of supply. 3) supplier must have successfully supplied any type of wheel gauge to any depot of indian railways, offer will be passed on, if documents for successful supply are not made available. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45652226

10 Jul, 2026 NA

Bardhaman - West Bengal

Tender For supply of camera based automation scheme for billet length measurement in wire rod mill & bar mill of isp

Central Government/Public Sector

CTN :45648012

13 Jul, 2026 NA

Guna - Madhya Pradesh

Tender For supply of measuring instruments - vernier caliper , bore gauge with dial gauge along with extensions for deep-hole measurement , back plunger type dial gauge, series 1 , dial indicator, metric, series 2, lever type dial indicator (puppy dial). , dial indicator, metric, series 2, , bore gauge with dial gauge, along with extensions for deep-hole measurement , bore gauge with dial gauge along withextensions for deep-hole measurement , , tubular depth micrometer, , out side micrometer with rachet stop, tubular inside micrometer along withextension rod 3 nos (13, 25, 50 mm) , tubular inside micrometer along with extension rod 5 nos (13, 25, 50 - 2 nos, 100 mm) , tubular inside micrometer along with extension rod 6 nos (13, 25, 50-2 nos, 100, 200 mm)

Central Government/Public Sector

CTN :45550063

25 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of rodo meter (analog) spec. mechanical 5-digit counter, abs plastic wheel with rubber tyre, measure forward and back ward ,telescopic handle precision measuring wheel. other details as per technical specifications attached. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45644549

25 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of rodo meter (analog) spec. mechanical 5-digit counter, abs plastic wheel with rubber tyre, measure forward and back ward ,telescopic handle precision measuring wheel. other details as per technical specifications attached. [ warranty period: 12 months after the date of delivery ] ]

CTN :45527854

25 Jun, 2026 NA

Meerut - Uttar Pradesh

Tender For corrigendum : supply of mis items for office - pvc wire for grass cutting machine, grass cutting machine cup wheel of aluminum, laser distance meter, clamp meter, earth tester, road measuring wheel

CTN :45642827

29 Jun, 2026 29.22 Lacs

Multi City - Karnataka

Tender For supply of stationery and other essential office items required for fy 2026-27 for various sections of shivamogga city corporation - supplying of transparent document folder - side opening colored poly-plastic file storage bag with snap button - a4 & legal-size document folder for certificates, plastic file organizer, supplying of hard bind register book of size 12x14.5inch and having 100 pages with format printed as per directions of shivamogga city corporation with machine printed page numbers. (suitable for festival advance register (kmf-61), kmf-24, kmf-53 registers) (complete contents of format with machine printed page no. as per directions of shivamogga city corporations is considered as one page), supplying of hard bind register book of size (16.5x13) inch and having 100 pages with format printed as per directions of shivamogga city corporation with machine printed page numbers.(suitable for kmf-41, kmf-45, kmf-50, kmf-44), supplying of zip files hard bind, air freshener room spray upto 300ml, supplying of cobweb duster with extendable rod- extendable telescopic ceiling & fan duster with soft bristles and steel rod, supplying of a3 cloth envelop cover- a3 size (16 x12 inches) , supplying of push pin- 100 piece/box , liquid handwash dispenser bottle pump 100 ml, supplying of instant adhesive (fevikwik or equivalent) 500 mg, supplying of binder clips for paper holding clip metal black 15-51mm , supplying of table scissors, supplying of steel paper clips 100 clips/box , supplying of voucher file (supplying of voucher file with tag with logo and description as specified by shivamogga city corporation - complete set), supplying of hard bind attendance register printed with page numbers and having 100 pages. (complete contents of format with machine printed page no. as per directions of shivamogga city corporations is considered as one page), supplying of correction pen (whitener) with squeeze control and smudge free operation., supplying of a4 envelope cover, supplying ream of a4 sheets of each sheet thickness of 80 gsm suitable for copying and printing with white colour and ream having minimum 500 sheets., supplying ream of a3 sheets of each sheet thickness of 70 gsm suitable for copying and printing with white colour and ream having minimum 500 sheets., supplying ream of a4 sheets of each sheet thickness of 80 gsm suitable for copying and printing with yellow colour and ream having minimum 500 sheets., supplying ream of a4 sheets of each sheet thickness of 70 gsm suitable for copying and printing with blue colour and ream having minimum 500 sheets., supplying ream of a4 sheets of each sheet thickness of 70 gsm suitable for copying and printing with white colour and ream having minimum 500 sheets., supplying of cotton file tag (100 no. bundle)., supplying of coir door mat, supplying of cora cloth made of cotton with tight weave suitable for wrapping files and other office documents., supplying of aaa alkaline battery of voltage 1.5v with warranty of 01 year., supplying of 30 cms plastic scale ., supplying of rubber band (big size )., supplying of usb 2.0 flash drive (pen drive ) of capacity 32 gb. , supplying of plastic pen stand., supplying of fibre glass measurement tape of scale 30 mtr with unbreakable abs case having durable winding mechanism handle and steel end hook , supplying of ink bottle (blue/black) (250 ml)., supplying of ink pad (blue/black)., supplying of adhesive bottle with (250 ml)., supplying of glue stick., supplying of file thin wrapper (brown) with logo and description as specified by shivamogga city corporation., supplying of file wrapper hard calico (thick) file with logo and description as specified by shivamogga city corporation., supplying of calico file board tapal board with tieing threads., supplying of desktop basic calculator with 12 digits display including functional batteries., supplying of cardboard lever arch (cardboard box file)., supplying of no dust broom stick made of washable

Measuring Wheel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector