Tender For repairs maintenance of electrical and mechanical equipments high mast light search lights and other miscellaneous items at cad pulgaon - disconnecting and taking down existing unserviceable street lights/flood lights any type/watts from pole/wall and dismantling the light fittings. repairing/replacing unserviceable parts re-fixing the same on pole/wall after testing and removal of carbon from line jumpers/tightening of jumper/alignment of fitting defective street light/security light/flood lights fitting/led light from electric pole complete all as directed by eic. note: spare parts and accessories such as led driver, and connected items etc will be measured and paid separately under respective item as supply only and fixing is deemed to be included in this item., supply only led street light driver for 45 watts led street light as per make given all as specified and directed by eic., supply only led street light driver for 60 watts led street light/ flood light type as per make given all as specified and directed by eic., supply only led street light driver for 100 watts led street light/ flood light type as per make given all as specified and directed by eic., supply and fix in repair led streetlight of 45 watt comprises of pressure die cast aluminium housing & having system efficiency>123 lumens/watt i.e 5570 lumens,all leds should be highpower leds of 1w to 3w only with modular lens for batwing shape distribution of 30 degree & 60 degree,input voltage working range is 140 vac to 270 vac,brand name should be embossed,potted driver is used with 4kv internal & external 5kv potted surge protection,short circuit protection,open circuit protection,high & low voltage protection,fixture should withstand high & low voltage protection,fixture should withstand high voltage upto440 v for 8 hr,ip66 protected,thd10%,cri>70 cct 5700+/-300k,pf>0.9,driver efficiency>85%,lm79 report required from nabl accredited lab. including taking down old unserviceable fittings and bracket house must be adjustable or if required any cost of all fixing hardware shall be included in quoted rate complete all as specified and directed by eic note : 1. engraving of ca number on each lighting fitting (street light / flood light) shall be carried out by the contractor and the cost of the same shall be deemed to be included in the quoted rate. 2. no extra payment shall be made on this account. 3.the complete fitting along with led module, driver, surge protection device and all associated accessories shall be covered under 05 (five) years comprehensive warranty by the contractor from the date of invoice.make : philips/ wipro/crompton, supply and fix in repair led streetlight of 60 watt comprises of pressure die cast aluminium housing & having system efficiency>110 lumens/watt i.e 6670 lumens,all leds should be highpower leds of 1w to 3w only with modular lens for batwing shape distribution of 30 degree & 60 degree,input voltage working range is 140 vac to 270 vac,brand name should be embossed,potted driver is used with 4kv internal & external 5kv potted surge protection,short circuit protection,open circuit protection,high & low voltage protection,fixture should withstand high & low voltage protection,fixture should withstand high voltage upto440 v for 8 hr,ip66 protected,thd10%,cri>70 cct 5700+/-300k, pf>0.9, driver efficiency>85%,lm79 report required from nabl accredited lab. including taking down old unserviceable fittings and bracket house must be adjustable or if required any cost of all fixing hardware shall be included in quoted rate complete all as specified and directed by eic. note : 1. engraving of ca number on each lighting fitting (street light / flood light) shall be carried out by the contractor and the cost of the same shall be deemed to be included in the quoted rate. 2. no extra payment shall be made on this account.3. the complete fitting along with led module, driver, surge protection device and all as
Tender For corrigendum : providing of repair and overhauling service - online ups 10 kva for critical infrastructures-is:13947, is:9000; repairing of 55kw/ 75hp, abb make vfd acs580-01-0106a-4 of the pan no-6 of mechanicalcirculator motor; no; buyer premises
Tender For tender for supply of mill hydraulic bucket with o ring of mill no. 1 , 2 & 3 as per drawing no. 194120/176r d , mill hydraulic bucket with o ring for mill no. 4 as per drawing no. 2000820/304 , dholak type bush with brass lining size 32x30x16x25 mm , rubber pad for juice & water weighing scale , silicon butyle rubber seat 20 inch size gasket for autoclave as per sample. , new rubber strip for kt 1350 cont.c/f m/c size 1/4 inch thick x 9 inch wide x 100 inch length. , rubber o ring size 3 x 16mm , epdm rubber seat for pan right angle valve 6inch size 180 x 102 x 12 mm thk , rubber seat for pan no. 4 exhaust valve of 24 inch as per drawing no. 30060907/373 , rubber ring for a pug mill , rubber seat size 32 inch for exhaust steam valve as per drg. no. sneh-2010813/388 fig no.1 , dumping pad for sugar dust collector id fan size 150 x 75 x 16 mm for c.f. machine , vacuum rubber hose pipe size id 222 x 450 mm long , vacuums rubber hose pipe size id 132 x 450 mm long , vacuums rubber hose pipe size id 60 x 450 mm long , neo. rubber seat for 24 inch size exhaust vapor valve suitable for 300degreec temp for drg.sneh-20100813/388 fig-02 , neo. rubber seat for 26 inch size exhaust vapor valve suitable for 300degreec temp for drg.sneh-20100813/388 fig-02 , neo. rubber seat for 20 inch size exhaust steam valve of j.h suitable for 300degreec temp drg.lks-992365/125 /282 , neo. rubber seat for 24 inch size exhaust vapor valve suitable for 300degreec temp for drg.sneh-20110718/390 fig-01 , neo. rubber seat for 16 inch size exhaust steam valve suitable for 300degreec temp for j.h. valve drg.sneh-20070927 , neo. rubber seat for 16 inch size exhaust steam valve suitable for 300degreec temp for j.h.valve drg.sneh-20001016/293 , rubber ring for main hole of new quad body drg.no. sneh-20110718/390 fig-2 , rubber ring for main hole of old quad body drg.no. lks-980331/260 fig-r-01 , rubber ring of telescopic valve for inner pipe diameter 5inch , rubber strip 8 x 14 x 15 , rubber v seal bore 105 mm , rubber ring for pan dis. valve drg. 980331/266 , rubber seat for juice weighing scale od-690mm bore-30mm thk 25 mm as per drg. , rubber seat for water weighing scale od-470mm bore-25mm thk 20 mm as per drg. , rubber hose pipe for radiator id-2.5 inch l-18 inch , siliconized butyle rubber seat for 34 inch exhaust valve suitable for 300 degreec as per sample size 910x760x40mm thk , neo. rubber pad 6 inch x 10 mm x 32inchlength , rubber o ring size 155 x 3 mm , neoprine rubber rope (cord) size 4.5 mm , rubber star l-75 , rubber star l-95 , rubber star l-100 , star coupling l-75 material alluminium complete , star coupling l-95 material alluminium complete , star coupling l-100 material alluminium complete , rubber taper plug for pan tube size id 98 mm/102 mm , rubber taper plug for quad tube size id 42/45 mm , neoprine rubber seat for 750 mm size angle valve size od-815 mm , id-694 mm thick-25 mm , neoprine rubber seat for it body 560 m squ. h.s. main hole suitable for 200 degree c temp size od-530 mm , id-440 mm , thick- 25 mm , rubber seat for 40inch valve for nsk size od-870 mm , id-600 mm , thick- 20 mm , rubber mud seal size 1inch as per sample , rubber strip size 60 x 5 mm , rubber sheet for juice heater no. 6 exhaust valve as per drg. no. 20120730 , rubber ring for sight glass size 10inch , rubber sheet for pan exhaust valve as per drg. no. 940818/185 , rubber ring for mechanicalcirculator size 250 x 4 mm , rubber ring for mechanicalcirculator size 300 x 4 mm , rubber diaphragm size 25 mm , rubber diaphragm size 40 mm , rubber diaphragm size 50 mm , rubber diaphragm size 80 mm , neoprene rubber rod size 38 mm x 11inch length , neoprene rubber rod size 28 mm x 11inch length , rubber ring for condenser main hole size od560mmxid500mm x thickness 25mmgroove20mm (as per sample ) , rubber ring for jet box size od210mm x id 200mm x thk 20mm , groove 5mm (as per sample ) , roller drum for belt conveyor roller length-465 mm , shaft length- 486 mm , r
Tender For bid to ras providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - supply electro-mechanical items- item 6-16 amp combined switch and socket with fuse & indicator, similar to the existing 20 amp metal socket, similar to the 15 watt led bulb b-22 single phase prevenior 25 kvar each, 440-470volt, three-phase, box-type capacitor, similar to the existing ding-dong-call bell 18 wart led panel liglu 36 wan led panel light star delta timer 1/2 inch ball valve ss 316 1/2 mch ss 316 nippe) (6-8inch long) 8 inch gilass 10 inch glass 05aj well fitting nose pliers, similar to the existing combinatiou plier, similar to the existing pinoms vice grip plier wire stolpping plier 6 inch center punch 150 mm knife cutter beavy-duty with 10nos blades with each knife. the knife must be similar to the existing hammer 200 gm with handle screw driver two-in-one insulated 380- 405 long bolt cutter bc-24 bolt cutter bc-14 aluminium box type per filter 10 micron, similar to the existing 465x430x50 mm 470x430x50 mm 550x710x50 mm
Tender For repair maintenance of of various electrical and mechanical services at 100 bedded lbs hospital khichripur delhi sh supplying and replacement of faulty fire fighting fire alarm and pa system item at lbsh
Tender For auction sale of rolling stock - b.g. 8 wheeler 3 ac garib rath coach no. 1] special repair waccnh 076902, 2] special repair waccnh 066139 [grounded, condemnd] with all available ferrous -non ferrous -wooden fittings thereon but excluding the following reclaimable items - mechanical rc item -1) complete bogie and bolster assembly with all available fittings including brake gear items, bolster springs and axle spring with all components - 2 sets, (2) wheel set complete with axle, axle box and roller bearing assy - 4 sets, (3) brake cylinder complete - 4 nos, (4) brass wearing piece - 4 nos, (5) centre pivot - 2 nos., rc item were already removed and kept the coaches in ground., major items included in the lot - rmpu, transformer, water pump, junction box, copper feeder cable, bio tank, under slung water tank, buffer, battery etc., qty : 2 nos. as is where is basis., tare weight of the coach : 44.00 mt for each, location : grounded at kochi yard (chy)., ds 8 no.1] 534213 & 2] 534203 dtd.20.09.2025, custodian : sse/c and w/erm goods. note- 1] sale to be made on number basis but delivery is to be carried out by cut-up parts. 2]. purchaser has to remove/clear all the waste materials before concluding the delivery. 3] purchaser is permitted to engage his own labours for cutting and loading. 4] purchaser has to take precautionery measures while cutting against fire hazards., special conditions : 1) jurisdiction- the courts in chennai alone shall have exclusive jurisdiction in the matters/disputes arising out of the contract/arbitration/ conciliation proceedings and the place of arbitration/conciliation, if any, shall be in chennai only. 2) forfeiture of bsv payment along with emd.-in southern railway bsv partly paid along with emd will be forfeited, if full payment is not received in stipulated time, with interest if any applicable. 3) part delivery-part delivery is not permitted against part payment on southern railway, nfs/side assets : 1] all other coaches grounded on the location are to be treated as nfs, except coach no. special repair waccnh 076902 & 066139, . 2] being stocking yard, so many p.way & other railway items are available nearby. [p.l. no. 98111073 , hsn code : 720429, gst - 18 % on fcm],item : coaches in nos. [image attached].
Tender For auction sale of rolling stock - b.g. 8 wheeler garib rath sitting [cc] coach no. 1] special repair wsczach 076153 and b.g. 8 wheeler 3 ac garib rath coach no. 2] special repair waccnh 076139 [grounded, condemnd] with all available ferrous -non ferrous -wooden fittings thereon but excluding the following reclaimable items - mechanical rc item for each coach -1) complete bogie and bolster assembly with all available fittings including brake gear items, bolster springs and axle spring with all components - 2 sets, (2) wheel set complete with axle, axle box and roller bearing assy - 4 sets, (3) brake cylinder complete - 4 nos, (4) brass wearing piece - 4 nos, (5) centre pivot - 2 nos., rc item were already removed and kept the coaches in ground., major items included in the lot - rmpu, transformer, water pump, junction box, copper feeder cable, bio tank, under slung water tank, buffer. battery, etc. for each., qty : 2 nos. as is where is basis., tare weight of the coach : 44.00 mt for each, location : grounded at kochi yard (chy) near to mattancherry hault old station quarters., ds 8 no.1] 534219 & 2] 534205 dtd.20.09.2025, custodian : sse/c and w/erm goods. note- 1] sale to be made on number basis but delivery is to be carried out by cut-up parts of both the coaches. 2]. purchaser has to remove/clear all the waste materials before concluding the delivery. 3] purchaser is permitted to engage his own labours for cutting and loading. 4] purchaser has to take precautionery measures while cutting against fire hazards., special conditions : 1) jurisdiction- the courts in chennai alone shall have exclusive jurisdiction in the matters/disputes arising out of the contract/arbitration/conciliation proceedings and the place of arbitration/conciliation, if any, shall be in chennai only. 2) forfeiture of bsv payment along with emd.-in southern railway bsv partly paid along with emd will be forfeited, if full payment is not received in stipulated time, with interest if any applicable. 3) part delivery-part delivery is not permitted against part payment on southern railway, nfs/side assets : 1] all other coaches grounded on the location are to be treated as nfs, except coach no. wsczach 076153 & waccnh 076139, 2] being stocking yard, so many p.way & other railway items are available nearby. [p.l. no. 98111073 , hsn code : 720429, gst - 18 % on fcm],item : coaches in nos. [image attached].
Tender For rrd of lwss bharwain samnoli in tehsil amb distt. una (hp) (sub head: -repair/replacement of damaged material & mechanical item of various pump house & tanks)
Tender For corrigendum : supply of lift gas blower 102c3001 spares : : -diffuser item no 13 part no dj09ad18 , diffuser cover item no 15 part no cv , throttle bushing item no 21a part no , impeller bolt item no 3 part no bo03 , shaft sleeve lower item no 50a par , shaft sleeve upper item no 50b pa , seal rotating face item no 51a part n , mechanical seal item no 60b part no , thrmal barrier gasket item no 87a par , o ring repair kit item no 936 part no , compressor casing item no 1 part no , seal housing item no 30 part no e ho