Latest mechanical fabrication Tenders | Government mechanical fabrication Tenders

CTN :45648318

07 Jul, 2026 6.60 Lacs

Najibabad - Uttar Pradesh

Tender For supply of mechanical fabrication 1 , mechanical fabrication 2 , mechanical fabrication 3 , mechanical fabrication 4 , mechanical fabrication 5 , mechanical fabrication 6 , mechanical fabrication 7 , mechanical fabrication 8

CTN :45648388

07 Jul, 2026 5.75 Lacs

Najibabad - Uttar Pradesh

Tender For supply of mechanical fabrication 1 , mechanical fabrication 2 , mechanical fabrication 3 , mechanical fabrication 4 , mechanical fabrication 5 , mechanical fabrication 6 , mechanical fabrication 7 , mechanical fabrication 8 , mechanical fabrication 9 , mechanical fabrication 10 , mechanical fabrication 11

State Government

CTN :45409178

26 Jun, 2026 NA

Karur - Tamil Nadu

Tender For corrigendum : fabrication and erection of new high pressure pump and its suction, delivery lines in cbp 2 for vat cleaning at pulp - mechanical - fabrication and erection of new high pressure pump and its suction & delivery lines in cbp#2 for vat cleaning at pulp - mechanical

CTN :45643001

07 Jul, 2026 5.60 Lacs

Najibabad - Uttar Pradesh

Tender For tender for mechanical fabrication 1 , mechanical fabrication 2 , mechanical fabrication 3 , mechanical fabrication 4 , mechanical fabrication 5 , mechanical fabrication 6 , mechanical fabrication 7 , mechanical fabrication 8 , mechanical fabrication 9 , mechanical fabrication 10 , mechanical fabrication 11 , mechanical fabrication 12 , mechanical fabrication 13 , mechanical fabrication 14 , mechanical fabrication 15 , mechanical fabrication 16 , mechanical fabrication 17 , mechanical fabrication 18 , mechanical fabrication 19 , mechanical fabrication 20 , mechanical fabrication 21 , mechanical fabrication 22 , mechanical fabrication 23 , mechanical fabrication 24 , mechanical fabrication 25 , mechanical fabrication 26 , mechanical fabrication 27 , mechanical fabrication 28 , mechanical fabrication 29 , mechanical fabrication 30 , mechanical fabrication 31 , mechanical fabrication 32 , mechanical fabrication 33

State Government

CTN :45295826

22 Jun, 2026 72.34 Lacs

Umaria - Madhya Pradesh

Tender For corrigendum : work contract for various mechanical fabrication work for c and i upgradation during, before aoh in boiler and turbine of unit no. 1, 2 and 3 at ph i and ph ii,sgtps, mppgcl, birsinghpur

Co-operative

CTN :45415201

10 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For fabrication and erection -replacement of the 2" x 2" square bar rails installed on the cane unloader. removal of the old juice gutter from 'a' mill, fabrication and installation of a new one, and conducting a successful trial run. removal of the old m.s. juice tray from 'a' mill, and fabrication and installation of a new one using m.s. plates. fabrication and installation of a new gear guard in the 'a' mill house. welding of worn-out teeth on the mill pinion as required, followed by grinding to a smooth finish. repair of damaged/worn parts of the tail bar coupling by welding as required, followed by grinding. repair of damaged/worn parts of the tail bar by welding as required, followed by grinding. comprehensive repair of the d.s.m. screen: cutting out and removing corroded sections, fabricating and fitting new replacements, repairing all internal piping, and conducting a successful trial run. thorough cleaning of the cane carrier slats, along with their attached links, pins, rollers, and bushes; followed by greasing and refitting said components into the slats in their proper positions. thorough cleaning of the slats, links, pins, bushes, and rollers of the primary/secondary cane carrier chains; followed by greasing, assembling the chain components, and preparing the chain as per instructions. fabrication and installation of juice rings for the rollers. fabrication and installation of mill bearing guards using 3 mm plates. fabrication and installation of m.s. scrapers for the under-feed rollers. cutting of chevron grooves into old mill rollers as required. cutting of chevron grooves into new mill rollers as required. creating 'dots' on the top and feed rollers of the mill using arc-welding electrodes, as per instructions. [repair/replacement of] m.s. components for the worn-out teeth of the under-feed rollers. cutting out patches from a plate and installing them as new teeth. performing arc welding on the grooves of rollers used in the mills using electrodes, as per instructions. fabricating side juice guards for mill rollers from 3 mm plates, as per instructions. fabricating an under-feed roller for the mill in accordance with the provided drawings. dismantling a damaged or defective juice tank in the mill house; fabricating and installing a new tank in its place, and conducting a trial run. replacing or repairing the damaged sections of a defective juice tank in the mill house. dismantling and replacing the bottom plate of a damaged or defective juice tank in the mill house. cane carrier / bagasse carrier / bagasse elevator / cross bagasse carrier / r.b. c. removal of the cane carrier side plate and installation of a new plate. a. welding or forging the enlarged pin holes in the links of the cane carrier, bagasse carrier, etc., to match the specific pin size. a. removal of broken runners from the cane carrier, inter-carrier, bagasse elevator, return bagasse carrier, or cross bagasse carrier, and installation of new runners in their place. a. removal of old, damaged cane carrier slats and installation of new slats. a. the task of drilling holes in new slats for the cane carrier and inter-carrier. a. straightening and repairing cane carrier slats as required. a. repairing damaged and weakened hoods of the cane chopper, cutter, and fibrizer in accordance with instructions. a. removal of old, damaged cane carrier slats; straightening the damaged slats; cutting out the damaged sections; and repairing them by welding in new or salvaged slat pieces cut to size, thereby restoring the slats to their proper dimensions. a. welding the enlarged holes in the inter-carrier links and re-drilling them to the correct size to match the rivets. a. filling the enlarged holes in old inter-carrier slats by welding, and subsequently re-drilling them to create new holes in accordance with the engineering drawings. a. removal of the damaged band from the inter-carrier clutch shaft, fabricating and installing a new one, and conducting a satisfactory

CTN :44796739

28 May, 2026 NA

Bangalore - Karnataka

Tender For expression of interest precision mechanical fabrication

Mechanical Fabrication Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Co-operative