Latest mechanical machine scrap Tenders | Government mechanical machine scrap Tenders

State Government

CTN :43243038

05 Jan, 2026 59.00 Lacs

Kota - Rajasthan

Tender For implants and consumable items for gastroentrology dept - gestroentrology accessories (consumable items 1-25) and items for implants, guide wire (ercp) - 480 cm, 0.025, 1:1 torque ability - 6-9 cm hydrophiic tip, good stiffness, sphincterotome - tripple lumen pull type, tip 4.5 - 5.5 fr - short nose, 20mm, monofilament cut wire, needle knife - triple lumen cut wire-adjustable length, tip 5fr, 2.8mm, channel compatible, biliary stone retrieval balloon - 10-16mm diameter distal type - 7fr, 0.035 wire compatible, stone retrieval basket - 4 wired, 2.8mm working length, 2.5-3 cm diameter, foreign body removal roth net basket - for removal of foreign body from gi tract compatible with adult endoscope. another net basket compatible with pediatric ugi endoscope (channel 1.8-2.2mm), tts ballon - for esophageal, pyloric and colonic dilatation - non complaint maternal, clear see through material, 5.5 cm length multiple size with different pressurea) balloon with 8-9-10 mm diameter, b) balloon with 12-13.5-15 mm diameter, foreign body alligator forceps - 2.8mm adult channel compatible, 230cm length >11mm diameter with rat tooth. another pediatric alligator/rat tooth forceps compatible with pediatric ugi endoscope (channel 1.8 - 2.2mm), polypectomy snare - large size, 3-6 cm oval, 2.8mm, channel compatible, injector - 23g, 240cm, 7 fr. good stiffness, injector -a). 21g, 165cm, 7 fr. good stiffness, biopsy forceps for ugie, colon-reusable with spike, endoscopic clipping device rotatable with witout handle - 2.8mm channel>230 cm length, 2 clip arm length 7-9 mm, mechanical lithotripter basket with and without handle - * through the scope* should have tip breaking technology to avoid impaction* diameter > 3cmshould be wire guided 0.035, biliary stent introducer assembly - for insertion of 10 fr. and 7 fr. plastic stent, multi band ligator set - clear ligator barrel non latex material 6 bands per cylinder, cre inflation device (alliance gun) compatible with cre ttp balloon with syringe, achalasia balloon - over the wire balloon, size 30mm & 35mm, length => 10cm, cystotome - 6 f, 10 f - for transgastric or transduodenal puncture of pseudocyst - 165 cm in length. diathermy ring size compatible with mentioned cystotome., billiary stent (plastic) duoble pigtail - size 7fx10cm, 10fx10cm, 10fx8fm billiary stent (plastic) straight - size 10fx10cm, 7fx10cmpancreatic stent (plastic) - size 7fx10cm, 10fx10cm, 10fx8fm, hydrophilic guide wire (terumo) - straight tip/j-tip, hydrophilic in nature - diameter - 0.032 inch length - 260 cm, biliary bolloon dilator - sizes 4mm, 6mm, 8mm - should have radio opaque marketers for accurate positioning - balloon length 2-4 mm. should be compatible with instrument channel - size 4.2 mm, spring tip steel guide wire - 160-250 cms, eus needle (endoscopic ultrasuound needle) fna needle with 3 different size 19, 22, 25 g, good ultrasuound visibility with adjustable needle needle length and sheath length., through the scope clip - the clip with 11-14mm jaw alongwith 1-2 mm teeth having curved angle., esophageal sems - partially covered - sillicon coating 10,12,15 cm> 18mm diameter> 3 ro marker, thread at proximal-end, esophageal sems - cervical sems - full covered 5mm upper end flare, biliary sems - through the scope 6,8,10 cm length>80% recons > 3ro marker endoscopic8 fr. introduction sysem, duodenal/pylorus sems - uncovered through the scope introduction assembly 10 fr., length 6,9 and 12 cm

CTN :43290934

06 Jan, 2026 10.20 Lacs

Surat - Gujarat

Tender For supply of list of books f f - sensing and gis , soft computing with matlab programming , gate 2026 civil engineering book , engineering material , highway engineering , airport planning and design , transportation engg , environmental engineering sewage waste disposal and air pollution engineering vol2 , hydrology and water resoureses engg , traffic engineering and transport planning , construction engineering management of projects , transportation engineering , disaster management , modern project management , building materials , basic civil engg , environmental engg1 water supply engg , environmental engineering 2 waste water engg , ground improvement techniques , project planning control with pert cpm , practical construction contract issues which are not commonly understood , infrastructure and contract management 2nd edition 2024 , infrastructure engineering management , iot and smart cities , disaster management act 2005 , project management cpm, pert gertscheduling with linear programming , guide to rera with rera check lists by taxmann gujarat rera manual , law relating to tenders and government contracts , irrigation engineering , indian constitution , surveying vol i , surveying vol ii , surveying vol iii , building planning designing and scheduling , digital principles and applications , a first course in artificial intelligence , integrated electronics , cmos digital integrated circuits analysis and design design of analog cmos integrated circuits , introduction to robotics , engineering circuit analysis , introductory circuit analysis electronic devices and circuit theory 11e , computer networking and the internet computer networks and internets 6e , arm system on chip architecture 2nd edition , basic vlsi design , signals and systems , automation, production systems, and computer integrated manufacturing 5th edition , internet of things an indian adaptation concepts and applications , machine learning with python , communication systems , an introduction to analog and digital communications , linear circuits analysis , electronic devices and circuits , gate 2026 electronics engineering previous year solved papers , isro drdo bsnl previous years solved papers of electronics engineering , a handbook on electronics engineering , an introduction to internet of things connecting devices edge gateway and cloud with applications , industrial automation and robotics 2nd edition , introduction to the constitution of india , the constitution of india , thermodynamics basics and applied thermodynamics , principles of materials science and engineering , fundamentals of finite element analysis , shigleys mechanical engineering design , engineering thermodynamics , manufacturing technology vol1 5th edition , design of machine elements , machine design data book , oil hydraulic systems-principles and maintanance , fluid mechanics 9th edition , engineering fundamentals of the of internal combustion engine , materials science and metallurgy , manufacturing engineering and technology , fluid mechanics an introduction 3rd ed , fluid power with applications , callisters material science and engineering , project management , quality management , fluid mechanics and machinery , fluid mechanics , gate mechanical engineering , welding engineering and technology , industrial safety health and environment management systems by , automobile mechanics , fluid machinery , engineering mechanics , shortcuts in reasoning //bid details2 / 163verbal nonverbal analytical critical for competitive exams , general quantitative aptitude for competitive exams , oil hydraulics and pneumatics , project management cpm pert gert scheduling with linear programming , general knowledge , how to crack test of reasoning , a new approach to reasoning verbal non verbal , mechanical system design , hydraulic and fluid mechanics , fluid mechanics hydraulics and hydraulic machines , environmental engineering fundamentals sustainability design 3rd edition , the mb

CTN :43016653

27 Dec, 2025 2.33 Lacs

Bardhaman - West Bengal

Tender For corrigendum : supply of miscellaneous material for different section of workshop c c 5 f5 f -cotton canvas hand gloves for iron and steel handeling , flexible pvc wire 1 sqmm , flexible pvc wire 1. 5 sqmm , self adhesive pvc tape 1. 8cm x 9m x 0. 125mm , cutting nozzle anm 3 by 64in , cutting nozzle anm 1 by 32in , cutting nozzle anm 1 by 16in , welding goggles , led tube light 20 watt , led flood light 100watt , pipe wrench 450 mm , hand gloves leather pu coated for welding , half round file 2nd cut 300 mm , flat file 12 inch 2nd cut grade , m seal adhesive 25g packet , adhesive araldite , wheel abrsv cut off 16mm x 100mm x 1. 2mm , grinding wheel abrsv6mmx200mmx16mm , clamp 0. 5in ms frgd , tap thread cutting, 1 by 4in bsw , tap thread cutting, 5 by 16in bsw , tap thread cutting, 3 by 8in bsw , tap thread cutting, 5 by 8in bsw , tap thread cutting, 3 by 4in bsw , tap thread cutting, 1 by 2in bsw , straight shank twist drill bit hss 6. 4mm 1 by 4in , straight shanktwist drill bit hss 4. 8mm 3 by 16in , wheelabrsvcutoff 25. 4mm x355 mmx2. 8mm , cotton waste jute , stud ms 3by4 in x 5 by 8in x 3. 5 in without nut , stud ms 3 by 4 in x 5 by 8in x 4in without nut , aluminium paint anti rust , red oxide paint synthtc enaml , electrician tool kit set , mechanical tool kit set , hex head bolt 5by 8 x 1. 5 inch

CTN :43282800

03 Jan, 2026 NA

Jalgaon - Maharashtra

Tender For quotation for installation of 10-pair unarmoured jellyfilled cabling and related accessories for telephone system at government college of engineering jalgaon-to provide 10-pair unarmoured jellyfilled, 0.smm copper gauge telephone cable, to laying of 10-pair uj cable, , to provide & install 10-pair mdf junction box @ civil lab with material & labour charges ,|to remove old 20-pair armoured cable & it's joint & rejointing the 20 to i0 pair cable @ admin-mechanical building corner mdf junction box using module, to laying of two-pair pvc telephone cable

CTN :43291083

26 Dec, 2025 NA

Rangiya - Assam

Tender For supply of frame clamped abrasive rail cutting machine having a strong and rigid clamping arrangement made of tough, durable light weight material having sufficient mechanical strength. specification: blade diameter <=400mm height (mm) 400-500 width (mm) 300-400 length (mm) 500-600 no load speed (rpm) 3800 cutting depth (mm) 140-160 cutting range, kg/m 50 power 4.8kilowatt cutting speed <=90 m/s

CTN :42902699

29 Dec, 2025 1.00 Crore

Khorda - Odisha

Tender For corrigendum : supply of supplying and installing modular furniture at epfo keonjhar odisha : : - modern design reception desk , medium back chair , seater bench , modular table , high back chair , potition of back unit storage material , sofa , coffee table made of second class teak wood , cabin table , high back chair , mid back chair , back storage unit , 3 seater sofa , coffee table , modular workstation , compactor , mechanical drive compactor , cabin table , high back natural leather chair , natural leather chair , lorraine leatherette 3 seater sofa , lorraine leatherette 1 seater sofa , center table , verticle storage material , modular cabin table , 360 degrees revolving high back chair , office desk office desk desk table , cafe table , cafe chair , conference table , mechanism mobile compactor , bay mechanical drive

CTN :42794002

24 Dec, 2025 NA

Delhi - Delhi

Tender For bid to ras corrigendum : supply of capacitor bank , marx generator pcb , trigerring switch , control mcu , casing material , battery pack nimh , discharge switch , heat sink , circuit protectors , assy , launcher tube projectile launcher , pressure chamber , solenoid valve , trigger mechanism , stabilization fins , air compressor , pressure regulator , scope or sight , stock and grip , pressure gauge , launch control mcu , mounting rail , paint coating , telemetry module , fpga controller , flight recorder , backup mechanical trigger , high-voltage capacitors , toroidal solenoidal coil , high-density battery , fast-acting switch , charging circuit components , pcb material , li-ion bty pack , boost converter module , microcontroller unit , pcb 2 layer fr 4 , grenade housing , misc components , charging module , coil wire copper , ferrite toroid core , mosfet igbt , adruino nano attinty 85 , impact sensor g-switch , miniature relay trigger , pcb custom , heat shrink insultion , grenade housing carbon composite material , shock absorption layer , trigger sensor , pcb board , casing , spark plug gap , trigered spark plug , thyristor scr , igbt mosfet ) /bid number : gem/2025/b/6750334 * /dated: 17-11-2025 & & / bid document 1 / 44

CTN :43228232

13 Jan, 2026 NA

Lehra Mohabat - Punjab

Tender For supply and application of thermal insulating material on boiler, turbine side piping, valves, hp/lp piping and mechanical auxiliaries and incorporation of removal/ repair/ reapplication of new/old ceramic pad insulation for hpt/ipt turbine modules of 2x210 and 2x250mw, ghtp, lehra mohabat.

Central Government/Public Sector

CTN :43270629

12 Jan, 2026 NA

Ratlam - Madhya Pradesh

Tender For supply of title - aluminium extension ladder, 11m aluminium ladder extension wall support ladder 24/40 asspecification given below aluminum alloy wall support extension ladder proved with top hand rallis and platform steps made of 26" 3 mm round corrugated flutted pipe main extrusion made up of aluminum alloy section 66*32*4mm thickness of he 30 grade t6 tempe hindalco make closed height 24 feet additional msguide pipe fixed insideheight 40 feet additional msguide pipe fixed inside of the ladder at 1 mir internal for stability of ladder arms., aluminium tower ladder of tiltable (inclined) tower ladder with bucket type having reach height of 31-40 (detailed descripbon/specification as per product # 1of gem contract no. gemc-511687717666536 dt. 15/12/2024) make-alied, alco, sumer, s.j. ladders, aluminium ladder self support & feet, anti skidding make-caw or superior , supply of heavy duty manual drum trolley suitable for handling standard 200-250 liter drums, capacity 250 kg. made of ms with powder-coated finish, suitable for titing, lifting and rotating operations, provided with 3 puirubber wheels for easy movement, equipped with mechanical drum holding damp, rotatable up to 3607, lifting height approx. 300-500 mm, manual handle operated, robust construction, without sharp edges , supply of heavy duty long life hydraulic operated manual stacker as per description: capacity 2000 kg. overall length 17:50 mm, fork arm length 1150 millimeter, overall fork width 650 mm (adjustable), lowered fork height 85 mm, mast height (close height) 2000 mm, tuming radius 1450 mm, lifting speed 14 mm per stroke, tandem pu rollers (80-70 mm), pump made of cast steel with powder-coated finish, construction ms (6 mm), service weight 234 kg, controllable lowering speed, and without sharp edges, supply of heavy duty aluminium, telescopic ladder, 14 steps (approx.) maximum extended height 18 ft (approx.), made of aluminium alloy with 1.5 mm thickness (approx.) foldable design, overall dimensions 109.27 48.57 8.8 cm (all approx.), weight 13.5 kg (approx), load capacity 150 kg (approx.), supply of aluminium platform ladder, height 5 ft (approx.), 4 steps (approx.), load capacity 100 kg (approx.), foldable design with top platform, made of aluminium, robust construction, without sharp edges, light weight moped trolly, push trolley b.g. with umbrella complete for p.way track inspection as per rdso specification no. tm/sm/lw/pt dated 03.02.2014, push trolley b.g. with umbrella complete for p.way track inspection as per rdso specification no. tm/sm/lw/pt dated 03.02.2014, digital cooking oil tester for total polar compounds (tpc meter). sample to be approved by competent authority before supply., poly proplene rope 18mm dia, unbranded pvc flexible waste pipe length 1200 mm brand: na (detailed description/ specification as per product # 1 of gem contract no. gemc-51168776088276 đi. 05/03/2025), upvc column pipe 50 mm dia type "heavy" pressure 27 kg/cm2, item code (colhvy200c) & equivalent. make: kisan kml, ashirwad kasta, retro reflective sticker golden yellow colour size width 4 feet, thick 0.40 to 0.45 mm.for slr brand mor avery dennison or orajet or similar, ss. self drilling screw 19x6 mm,, as per din and isi standard, bib cock as per cat. no. 29037 fusion range of m/s jaquar or mso-2080 of m/s marc, or fno-011 of m/s eauset or hr03 of essess or se-00202 of m/s agmeco, as approved by cde/rcf, subject to compliance of firm with clause 3 to clause 7 of section a of rdso/2008/cg-05, chain pulley block-2 ton chain length 10msingle fall isi marked, chain pulley, material- casting and forging, max lifting height: 3m - 10m, chain length: 3m-10m, weight: 20 kg (for 3m chain). make: ferreterro model number: ll020, indef 2000 kg (2 ton) & bajaj, retro reflective stop disc 600 mm dia red disc from minimum 20 swg gi sheet with a vertical stiffening "v' or 'u' bend in the middle having red reflector buttons/luminous stripes facing the road traffic. the dis

Central Government/Public Sector

CTN :43268509

09 Jan, 2026 NA

Dakshina Kannada - Karnataka

Tender For -custom bid for services - tender for attending fire water, raw water and other ug line leakages at mrpl aromatic complex as per boq (bidder has to quote lumpsum price higher or lower than the sor value excluding gst as per boq).-1 1050799 earth work in excavation by manual / mechanical means below ground level in all kinds of works in all types of soils, depth 0 to 1.5 m in any work condition irrespective of magnitude of work, work place, work space, height, degree of complications, temperature, gradient including setting out, removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, construction of shoring, strutting and bracing, leveling, grading and ramming of bottoms, dewatering up to any extent of accumulated water from any source and keeping the surface dry for subsequent works, disposal or stacking of excavated material within a lead of 2km, . all complete as per standard specifications and diretction of engineer incharge, 2 1050800 earth work in excavation by manual / mechanical means below ground level in all kinds of works in all types of soils, depth 1.5m to 3.0m in any work condition irrespective of magnitude of work, work place, work space, height, degree of complications, temperature, gradient including setting out, removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, construction of shoring, strutting and bracing, leveling, grading and ramming of bottoms, dewatering up to any extent of accumulated water from any source and keeping the surface dry for subsequent works, disposal or stacking of excavated material within a lead of 2km, etc. all complete as per standard specifications and diretction of engineer incharge, 3 1050801 earth work in excavation by manual / mechanical means below ground level in all kinds of works in all types of soils, depth 3.0m to 4.5m in any work condition irrespective of magnitude of work, work place, work space, height, degree of complications, temperature, gradient including setting out, removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, construction of shoring, strutting and bracing, leveling, grading and ramming of bottoms, dewatering up to any extent of accumulated water from any source and keeping the surface dry for subsequent works, disposal or stacking of excavated material within a lead of 2km, etc. all complete as per standard specifications and diretction of engineer incharge. 4 1050802 backfilling and compacting the soil in layers of 300mm after execution of the work to proper grade and level with selected materials from available excavated soil from soil heaps within a lead of 2.00km, including re- excavating the deposited soil excavated earlier, breaking clods, loading, transportation, unloading, spreading to required level, watering, rolling and ramming by manual methods/ mechanical compactors, dressing, trimming etc. with all tools & tackles, machinaries, labour etc complete as per standard specifications and diretction of engineer incharge. 5 1050803 transporting & disposal of the surplus earth and excavated material including shrubs and vegetations from construction area to maximum lead of 2.0 km including reexcavating the deposited soil excavated earlier, loading, transportation, unloading, laying at all depths and heights, stacking, leveling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes all complete as per standard specifications and diretction of engineer incharge.(the work volume of surplus material shall be measured as the difference of volume of excavation & the volume of back filling.), 6 1050804 pumping out water including dewatering the water mixed with muck/sludge etc from the trenches, ponds and other miscellaneous areas including supply and installation of dewatering pumps by contractor with all labour, hoses, consumables fuel etc.complete as per the directions of engineer incha

Mechanical Machine Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector