Latest mechanical circulator Tenders | Government mechanical circulator Tenders

Central Government/Public Sector

CTN :45365796

04 Jul, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu

CTN :45587525

30 Jun, 2026 NA

Bagpat - Uttar Pradesh

Tender For corrigendum : providing of repair and overhauling service - online ups 10 kva for critical infrastructures-is:13947, is:9000; repairing of 55kw/ 75hp, abb make vfd acs580-01-0106a-4 of the pan no-6 of mechanical circulator motor; no; buyer premises

State Government

CTN :45671132

01 Jul, 2026 NA

Ranchi - Jharkhand

Tender For basic rate of materials for inclusion in the schedule of rates for government of jharkhand to be used in different civil construction / infrastructure works and repair works.- providing and supplying in standard lengths high density polyethylene pipe (hdpe pipe) note: the rates are f.o.r. at work site in jharkhand but exclusive of gst & c.p. (confirming to is 4984-4984/14151/12786/13488 (latest revision with necessary jointing materials like mechanical connector i.e. thread/insert joint/quick release coupler joint/compression fitting joint or flanged joints excluding coupler/specials and taxes), hdpe pipe of materials grade pe100-pn06 (dia in mm), 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, 355 mm dia, 400 mm dia, 450 mm dia, 500 mm dia, hdpe pipe of materials grade pe100-pn10 (dia in mm), 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, 355 mm dia, 400 mm dia, 450 mm dia, 500 mm dia, medium density polyethylene pipe (mdpe pipe) in standard length with necessary jointing materials like mechanical connector i.e., thread / insert joint / quick release coupler joint / compression fitting joint or flanged joints. note: the rates are f.o.r. at work site in jharkhand but exclusive of gst & c.p. (conforming to iso 4427:1996)., mdpe pipe of materials grade pe 80, pn16, 20 mm dia, 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, mdpe pipe of materials grade pe 80, pn12.5, 20 mm dia, 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, mdpe pipe of materials grade pe 80, pn10, 20 mm dia, 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, mdpe pipe of materials grade pe 80, pn8, 20 mm dia, 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, mdpe pipe of materials grade pe 80, pn6, 20 mm dia, 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, manufacturing, providing and supplying spirally welded/ erw/ saw / fabricated m. s. pipes (commercial quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes welding on automatic welding machine and forming ‘v’ edge on both ends of pipes in all respect, etc. complete (no negative tolerance in thickness is permissible). note: the rates are f.o.r. at work site in jharkhand but exclusive of gst & c.p. (conforming to is: 3589 and is: 5504), dia of pipe: 100 mm (i.d.), thickness of pipe:, 6mm thick, 8mm thick, 10mm thick, dia of pipe: 200 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 250 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 300 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 350 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 400 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 450 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 500 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 550 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 600 mm (i.d.), thickness of pipe:, 6 mm, 8

CTN :45648458

07 Jul, 2026 4.00 Lacs

Najibabad - Uttar Pradesh

Tender For tender for supply of mill hydraulic bucket with o ring of mill no. 1 , 2 & 3 as per drawing no. 194120/176r d , mill hydraulic bucket with o ring for mill no. 4 as per drawing no. 2000820/304 , dholak type bush with brass lining size 32x30x16x25 mm , rubber pad for juice & water weighing scale , silicon butyle rubber seat 20 inch size gasket for autoclave as per sample. , new rubber strip for kt 1350 cont.c/f m/c size 1/4 inch thick x 9 inch wide x 100 inch length. , rubber o ring size 3 x 16mm , epdm rubber seat for pan right angle valve 6inch size 180 x 102 x 12 mm thk , rubber seat for pan no. 4 exhaust valve of 24 inch as per drawing no. 30060907/373 , rubber ring for a pug mill , rubber seat size 32 inch for exhaust steam valve as per drg. no. sneh-2010813/388 fig no.1 , dumping pad for sugar dust collector id fan size 150 x 75 x 16 mm for c.f. machine , vacuum rubber hose pipe size id 222 x 450 mm long , vacuums rubber hose pipe size id 132 x 450 mm long , vacuums rubber hose pipe size id 60 x 450 mm long , neo. rubber seat for 24 inch size exhaust vapor valve suitable for 300degreec temp for drg.sneh-20100813/388 fig-02 , neo. rubber seat for 26 inch size exhaust vapor valve suitable for 300degreec temp for drg.sneh-20100813/388 fig-02 , neo. rubber seat for 20 inch size exhaust steam valve of j.h suitable for 300degreec temp drg.lks-992365/125 /282 , neo. rubber seat for 24 inch size exhaust vapor valve suitable for 300degreec temp for drg.sneh-20110718/390 fig-01 , neo. rubber seat for 16 inch size exhaust steam valve suitable for 300degreec temp for j.h. valve drg.sneh-20070927 , neo. rubber seat for 16 inch size exhaust steam valve suitable for 300degreec temp for j.h.valve drg.sneh-20001016/293 , rubber ring for main hole of new quad body drg.no. sneh-20110718/390 fig-2 , rubber ring for main hole of old quad body drg.no. lks-980331/260 fig-r-01 , rubber ring of telescopic valve for inner pipe diameter 5inch , rubber strip 8 x 14 x 15 , rubber v seal bore 105 mm , rubber ring for pan dis. valve drg. 980331/266 , rubber seat for juice weighing scale od-690mm bore-30mm thk 25 mm as per drg. , rubber seat for water weighing scale od-470mm bore-25mm thk 20 mm as per drg. , rubber hose pipe for radiator id-2.5 inch l-18 inch , siliconized butyle rubber seat for 34 inch exhaust valve suitable for 300 degreec as per sample size 910x760x40mm thk , neo. rubber pad 6 inch x 10 mm x 32inchlength , rubber o ring size 155 x 3 mm , neoprine rubber rope (cord) size 4.5 mm , rubber star l-75 , rubber star l-95 , rubber star l-100 , star coupling l-75 material alluminium complete , star coupling l-95 material alluminium complete , star coupling l-100 material alluminium complete , rubber taper plug for pan tube size id 98 mm/102 mm , rubber taper plug for quad tube size id 42/45 mm , neoprine rubber seat for 750 mm size angle valve size od-815 mm , id-694 mm thick-25 mm , neoprine rubber seat for it body 560 m squ. h.s. main hole suitable for 200 degree c temp size od-530 mm , id-440 mm , thick- 25 mm , rubber seat for 40inch valve for nsk size od-870 mm , id-600 mm , thick- 20 mm , rubber mud seal size 1inch as per sample , rubber strip size 60 x 5 mm , rubber sheet for juice heater no. 6 exhaust valve as per drg. no. 20120730 , rubber ring for sight glass size 10inch , rubber sheet for pan exhaust valve as per drg. no. 940818/185 , rubber ring for mechanical circulator size 250 x 4 mm , rubber ring for mechanical circulator size 300 x 4 mm , rubber diaphragm size 25 mm , rubber diaphragm size 40 mm , rubber diaphragm size 50 mm , rubber diaphragm size 80 mm , neoprene rubber rod size 38 mm x 11inch length , neoprene rubber rod size 28 mm x 11inch length , rubber ring for condenser main hole size od560mmxid500mm x thickness 25mmgroove20mm (as per sample ) , rubber ring for jet box size od210mm x id 200mm x thk 20mm , groove 5mm (as per sample ) , roller drum for belt conveyor roller length-465 mm , shaft length- 486 mm , r

CTN :45506419

27 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For corrigendum : supply of repair of hydraulic press fit machine , repair of high pressure motor washing plant 2hp , repair of pallet truck 3 ton , reapir of mechanical gear box jack , repair of spilt ac 2 ton

Central Government/Public Sector

CTN :45486267

03 Jul, 2026 NA

Multi City - Multi State

Tender For technical upgradation of duo 8052,8059,8074,8078,8089 &3321 - dismantling, inspect, repair, recondition and fixing of electrical components & external rewiring for duomatic machines., dismantling, inspect, repair, recondition and fixing of pneumatic components for duomatic machines, dismantling, inspect, repair, recondition and fixing of hydraulic components for duomatic machines, dismantling, inspect, repair & recondition wherever required and fixing & assembling mechanical & transmission & under carriage components for duomatic machines., dismantling, inspect, repair & recondition and fixing of cabin components for duomatic machines., installation of split ac (220v/1 kw (qty-01)) with 5kva dg set (qty-01) in cabin., supply & installation of hydraulic filtration unit., supply & fixing of twin beam head lights, taillights, flasher lights, - dismantling, inspect, repair, recondition and fixing of electrical components & external rewiring for duomatic-3321 machine, - dismantling, inspect, repair, recondition and fixing of pneumatic components for duomatic 3321 machine, dismantling, inspect, repair, recondition and fixing of hydraulic components for duomatic 3321 machine., dismantling, inspect, repair & recondition wherever required and fixing & assembling mechanical & transmission & under carriage components for duomatic 3321 machine., - dismantling, inspect, repair & recondition and fixing of cabin components for duomatic 3321 machine., - checking, testing, calibration and commissioning of complete machine at site for duomatic 3321 machine., installation of split ac (220v/1 kw (qty-01)) with 5kva dg set (qty-01) in cabin of duomatic 3321 machine, supply & installation of hydraulic filtration unit for duomatic 3321 machine., installation & implementation of electrically operated emergency backup system for duomatic 3321 machine., - supply & fixing of twin beam head lights, taillights, flasher lights for duomatic 3321 machine..

CTN :45380879

10 Jun, 2026 NA

Doda - Jammu And Kashmir

Tender For supply of 10 pcs broken nut bolt extractor socket hex nut removal tool nut breaks bolt extractor f f - 10 pcs broken nut bolt extractor socket hex nut removal tool nut breaks bolt extractor , universal bearing puller set 21 in 1 pully removal and installation tool kit multi functional inner hole puller extractor with 3 jaws internal bearing puller automotive and mechanical repair , car wheel 12 se 50 mm 3 paw pilot bearing puller bushing gear extractor tool kit for removal bearing gears pulley flywheel hand tools , bearing puller capacity separator wheel hub axle puller pinion removal splitter tool kit dn- d1013 14 pcs , bosch gds 18v se 350 professional cordless impact wrench with brushless motor compact 131mm head multiple torque setting up to 350 nm for efficient bolting , disc break caliper rewind tool, 22 pcs universal wind back tool brakes piston wind back tool kit for automotive mechanic , multimeter cable , crank shaft grinding of 7.5 kva genr , oil pump of 7.5 kva genr , piston ring with crank shell of 7.5 kva genr , fuel tank of 7.5 kva genr , adapter pulley of grass cutting machine * /bid number : gem/2026/b/7604061 + /dated: 31-05-2026 ' ' / bid document 1 / 15

CTN :45147465

08 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; mechanical centrifuge machine, model 1230-11g, make genisco usa; service provider

State Government

CTN :45363282

06 Jun, 2026 1.91 Lacs

Delhi - Delhi

Tender For repair maintenance of specialized electrical and mechanical services of delhi high court, new delhi. (sh annual maintenance contract of pcs, photocopier machine and allied accessories installed at sub division-1 in delhi high court.)

CTN :45334418

12 Jun, 2026 NA

Multi City - Multi State

Tender For one time repair/servicing & overhauling and 3 years camc post 6 month warranty of "coil spring scragging & load deflection testing machine" installed at smithy shop of mechanical workshop, izzatnagar (as per scope of work).

Mechanical Circulator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government