Latest mechanical constructions Tenders | Government mechanical constructions Tenders

State Government

CTN :40487260

05 Jun, 2025 98.57 Lacs

Delhi - Delhi

Tender For development of dda play field in jj colony hastsal by laying red sand stone and granite over stage and stairs and fixing stainless steel railing over stage and construction of badminton court, basketball court and volleyball court at sports field ...

State Government

CTN :40501962

04 Jun, 2025 1.14 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc

State Government

CTN :40486461

02 Jun, 2025 6.99 Lacs

Kinnaur - Himachal Pradesh

Tender For a/r & m/o staging hut at charang in g.p charang tehsil moorang distt. kinnaur h.p. (sh:- dismentalling of existing dry stone brest wall, r/r masonry edge wall in cm 1:6, c/o s/r masonary stair case in cm 1:6, laying jointing, testing in trenches hdpe 25mm (od), p/f pvc sintex 2000 liters cap. i/c earth work etc)

CTN :40496456

09 Jun, 2025 29.07 Lacs

Indore - Madhya Pradesh

Tender For laying of mooram and crushed stone for solution of mud problem on necessary places in the city.

CTN :40496460

09 Jun, 2025 32.76 Lacs

Indore - Madhya Pradesh

Tender For laying of mooram and crushed stone for solution of mud problem on necessary places in the city.

CTN :40468356

10 Jun, 2025 NA

Kanchipuram - Tamil Nadu

Tender For dismantling and re- construction of moolavar sannathi, ambal sannathi, subramaniyar sannathi, construction of thirumadhil and laying cut stone flooring in temple praharam of arulmigu arulaleeswarar temple at azhisoor village, uthiramerur,kancheepuram

CTN :40497747

09 Jun, 2025 1.32 Lacs

Malda - West Bengal

Tender For construction of masonary foundation for fixing and laying of inaugural granite stone at 5 nos of mini (solar) rli schemes and 2 nos of clustered solar sprinkler irrigation schemes under ratua (a-m) sub-division under malda-ii (a-m) division.

CTN :40447681

30 May, 2025 4.72 Lacs

Multi City - Karnataka

Tender For supply of materials and machinery for construction of hitech toilet at government high school tavanshi villege of athani taluka - atn-1 granite/trap broken metal 100 mm and down size, atn2 coarse sand (zone iii), atn3 broken stone aggregate 40 mm size, atn4 broken stone aggregate 20 mm size, atn5 broken stone aggregate 12 mm to 10 mm size, atn6 portland cement, atn7 mixer (concrete) - 1 cum capacity, atn13 rubble stones, atn14 bond stone 20 x 20 x 45 cm, atn15 mixer (concrete small used in culvert), atn22 burnt bricks class 35 (non modular), atn10 tmt bars fe 500, atn11 binding wire, atn28 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for roof slab, atn24 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for columns, atn34 providing and fixing special make glazed vitrified tiles (granomite finish) of approvedmake, quality and colour of size 600x600x10mm thick fixed on existing flooring with a special adhesivefor flooring and skirting and jointed with neat cement slurry mixed with pigment to match the shade oftiles., including providing spacers at required interval and removing stains etc.,cost ofmaterials,mortar,labour etc., complete as per specifications., atn31 providing and fixing m.s.grill work for windows and ventilators weighing 21kg/sqm usingm.s. flats, or m.s. square rods, or combination of m.s. flats and square rods as per approved design,drawing including cutting steel sections and welding the same to required pattern with a coat of red leadprimer, cost of materials, fixtures, labour and hom of machinery complete as per specifications, atn36 providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster, atn38 providing and applying painting in two coats with plastic emulsion paint ofapproved brand on wall surface to give an even approved shade after throughly brushing the surface,free from mortar drops and other foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour, complete as per specifications., atn39 providing and finishing external walls in two coats with waterproof cement paint ofapproved brand and shade to give an even shade after throughly brooming the surface to remove all dirtand loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications., atn40 providing and fixing white vitreous china clay, water closet orissa pattern of size 580 x440mm with integral type footrests, 100mm s or p trap, 10 litre low level, p.v.c flushing cistern ( all areapproved make ) with fittings, c.i / m.s brackets, 32mm diameter flush pipe fittings and clamps, overflowarrangements with special and 25mm mosquito proof coupling of approved design, painting of fittingsand brackets, cutting and making good the wall and floor wherever including cost of material, atn41 providing and fixing white vitreous china clay, flat back wash basin size 550x400mmwith a pair of 15mm c.p brass pillar taps with c.i / m.s brackets, 32 mm c.p. brass waste of standardpattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required,including cost of materials, labour complete as per specifications., atn42 providing and fixing white vitreous china clay, wall corner type, lipped front urinal basinof size 340x410x265mm with 5 litres p.v.c automatic flushing cistern, c.i / m.s brackets, standard flushpipe and c.p. brass spreaders with brass unions and g.i. clamps complete painting of fittings andbrackets, cutting and making good the wall and floor wherever required, including cost of materials,labour complete as per specifications., atn44 providing and installing at site of work p.v.c. pipes including cost of pipes andspecials and labour, including lowering into trenches, laying true to line, level and perfect linking at jointsleak proof including jointing of approved t

Central Government/Public Sector

CTN :40458199

04 Jun, 2025 15.68 Lacs

Naigaon - Maharashtra

Tender For repairing of different roads during monsoon and laying of stone metal of dust at naigaon and neeljay deep ocm under neeljay sub area of wani area.

corporations/Associations/Others

CTN :40445752

30 May, 2025 9.99 Lacs

Ahmedabad - Gujarat

Tender For providing and laying drainage line, extension work of swd & drainage line , breakdown repairing and stone paving and other related work in rajpur area in viratnagar ward of east zone.(arc)

Mechanical Constructions Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

corporations/Associations/Others