Tender For repairs maintenance of electrical and mechanical equipments high mast light search lights and other miscellaneous items at cad pulgaon - disconnecting and taking down existing unserviceable street lights/flood lights any type/watts from pole/wall and dismantling the light fittings. repairing/replacing unserviceable parts re-fixing the same on pole/wall after testing and removal of carbon from line jumpers/tightening of jumper/alignment of fitting defective street light/security light/flood lights fitting/led light from electric pole complete all as directed by eic. note: spare parts and accessories such as led driver, and connected items etc will be measured and paid separately under respective item as supply only and fixing is deemed to be included in this item., supply only led street light driver for 45 watts led street light as per make given all as specified and directed by eic., supply only led street light driver for 60 watts led street light/ flood light type as per make given all as specified and directed by eic., supply only led street light driver for 100 watts led street light/ flood light type as per make given all as specified and directed by eic., supply and fix in repair led streetlight of 45 watt comprises of pressure die cast aluminium housing & having system efficiency>123 lumens/watt i.e 5570 lumens,all leds should be highpower leds of 1w to 3w only with modular lens for batwing shape distribution of 30 degree & 60 degree,input voltage working range is 140 vac to 270 vac,brand name should be embossed,potted driver is used with 4kv internal & external 5kv potted surge protection,short circuit protection,open circuit protection,high & low voltage protection,fixture should withstand high & low voltage protection,fixture should withstand high voltage upto440 v for 8 hr,ip66 protected,thd10%,cri>70 cct 5700+/-300k,pf>0.9,driver efficiency>85%,lm79 report required from nabl accredited lab. including taking down old unserviceable fittings and bracket house must be adjustable or if required any cost of all fixing hardware shall be included in quoted rate complete all as specified and directed by eic note : 1. engraving of ca number on each lighting fitting (street light / flood light) shall be carried out by the contractor and the cost of the same shall be deemed to be included in the quoted rate. 2. no extra payment shall be made on this account. 3.the complete fitting along with led module, driver, surge protection device and all associated accessories shall be covered under 05 (five) years comprehensive warranty by the contractor from the date of invoice.make : philips/ wipro/crompton, supply and fix in repair led streetlight of 60 watt comprises of pressure die cast aluminium housing & having system efficiency>110 lumens/watt i.e 6670 lumens,all leds should be highpower leds of 1w to 3w only with modular lens for batwing shape distribution of 30 degree & 60 degree,input voltage working range is 140 vac to 270 vac,brand name should be embossed,potted driver is used with 4kv internal & external 5kv potted surge protection,short circuit protection,open circuit protection,high & low voltage protection,fixture should withstand high & low voltage protection,fixture should withstand high voltage upto440 v for 8 hr,ip66 protected,thd10%,cri>70 cct 5700+/-300k, pf>0.9, driver efficiency>85%,lm79 report required from nabl accredited lab. including taking down old unserviceable fittings and bracket house must be adjustable or if required any cost of all fixing hardware shall be included in quoted rate complete all as specified and directed by eic. note : 1. engraving of ca number on each lighting fitting (street light / flood light) shall be carried out by the contractor and the cost of the same shall be deemed to be included in the quoted rate. 2. no extra payment shall be made on this account.3. the complete fitting along with led module, driver, surge protection device and all as
Tender For supply of mechanical sleeper spacer device with minimum closing length: 260mm, maximum opening length: 450mm, support plate thickness: 12mm hole dia. for tomy bar: 28mm tomy bar length for operation: 1meter approximate weight: 12 kg. steel material: en19 hardened (this steel confirms to is:5517-1993 grade 40cr 4mo3 steel.) output: 5 ton. make: asm hi rel solutions-ahmedabad or similar. [ warranty period: 30 months after the date of delivery ] ]
Tender For installation of various instruments at lakhanka and hamirpara irrigation scheme - providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anticorrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in- charge. , providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. c) concrete grade 1:2:4 and msa-40mm(graded)
Tender For auction sale of rolling stock - pl no.98111061, condemned bg-8 wheeler- icf gslrd coaches 4 nos, without bogie, with all available ferrous, non-ferrous-wooden fittings thereon but excluding the following 9 reclaimable mechanical rc items common to all 4 coaches - 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos 3] cbc/screw coupling set [draw bar with hook, draft gear assembly] 2 set, 4] bogie mounted brake cylinder 4 nos, 5] main doors -6 nos, 6] wearing piece( bronze) and plate 4 nos each, 7] distributor valve complete full set 1 set, 8], cut off angle cock- 4 nos, 9] dirt collector- 2 nos.. 1} coach no. special repair gslrd 056750 (year built 2005), ds-8 no. 334706 dt 02.04.26, electrical rc items 1] alternator 1 no, 2] regulator 1 no, 3] tensioning device 1 no, 4] bldc fan -7 nos, 5] 9w led lamp- 15 nos, 6] 2w led lamp 4 nos, 7] 5 w led lamp 4 nos 8] side lamp 2 nos 9] tail lamp 2 nos 10] toggle switch 17 nos 11] rotary switch with panel board- 1 no 12] v belt- 4 nos, 13] axle pulley- 1 no 14] alternator to regulator copper wire- 1 kg. 2} coach no. special repair gslrd 051121 (year built 2005), ds-8 no. 334707 dt 21.04.26, electrical rc items 1] alternator 1 no, 2] regulator 1 no, 3] tensioning device 1 no, 4] bldc fan -7 nos, 5] 9w led lamp- 14 nos, 6] 5 w led lamp 4 nos 7] side lamp 2 nos 8] tail lamp 2 nos 9] rotary switch with panel board- 1 no 10] v belt- 4 nos, 11] axle pulley- 1 no 12] alternator to regulator copper wire- 1 kg. 13] mobile charger sockets 14] emergency lamp unit- 2 nos 15] vrla battery - 19 nos, 16] battery tray 4 nos..3} coach no. ner gslrd 073723 (year built 2007), ds-8 no. 334712 dt 08.06.26, electrical rc items 1] alternator 1 no, 2] regulator 1 no, 3] tensioning device 1 no, 4] bldc fan -7 nos, 5] 9w led lamp- 16 nos, 6] 2 w led lamp 2 nos 7] side lamp 2 nos 8] tail lamp 2 nos 9] rotary switch with panel board- 1 no 10] v belt- 4 nos, 11] axle pulley- 1 no 12] alternator to regulator copper wire- 1 kg. 13] mobile charger sockets 14] emergency lamp unit- 1 no 15] vrla battery - 19 nos, 16] battery tray 4 nos. 17] luggage light 4 nos ..4) coach no. nr gslrd 064925 (year built 2006), ds-8 no. 334713 dt 08.06.26, electrical rc items 1] alternator 1 no, 2] regulator 1 no, 3] tensioning device 1 no, 4] bldc fan -7 nos, 5] 9w led lamp- 16 nos, 6] 2 w led lamp 2 nos 7] side lamp 2 nos 8] tail lamp 2 nos 9] rotary switch with panel board- 1 no 10] v belt- 4 nos, 11] axle pulley- 1 no 12] alternator to regulator copper wire- 1 kg. 13] mobile charger sockets 14] switches 15] emergency lamp unit- 2 nos 16] vrla battery - 19 nos, 17] battery tray 4 nos. 18] luggage light 4 nos...custodian sse/ c&w/ shoranur. location: 3 coaches stabled at ioh shed premises/ shoranur coach no 051121 presently available at road no 12 shoranur yard, it is to be shifted to ioh shed siding for cutting/delivery by the custodian.
Tender For corrigendum : tender for supply of wing tank drain plug removal ghe/gse/tool fuel sampling device for f1/f2 & f1a fuel sampling device for wing tank special ghe/gse/tool for opening terminals o distribution box up lock manual release ghe/gse/tool thread protection sleeve fomose landing gear aide thread protection sleeve for main landing gear aide mechanical selector lever opening ghe/gse/tool
Tender For supply of rechargeable lithium polymer power pack for experimental and training uav systems , high capacity rechargeable lithium polymer power pack for experimental and training uav systems , video monitoring and display device for aerial systems familiarisation and training , servo actuated mechanical release and actuation training module for experimental aerial platforms , handheld radio control transmitter for experimental unmanned aerial systems , rf video reception and signal evaluation module for experimental aerial systems , digital to analog video signal conversion module for technical evaluation systems
Tender For corrigendum : supply of stationary face part no 14 as per drawing , stationary face part no 14.1 as per drawing , rotating face part no 15 as per drawing , rotating face part no 15.1 as per drawing , gland gasket part no 18 as per drawing , gland gasket part no 18.1 as per drawing , sleeve gasket part no 19 as per drawing , sleeve gasket part no 19.1 as per drawing , gland bushing part no 24 as per drawing , o ring gasket part no 71 as per drawing , o ring gasket part no 71.1 as per drawing , o ring gasket part no 71.2 as per drawing , o ring gasket part no 71.3 as per drawing , snap ring part no 111 as per drawing , setting device part no 103 as per drawing , backing ring part no 44 as per drawing , backing ring part no 44.1 as per drawing , coil spring part no 16 as per drawing , coil spring part no 16.1 as per drawing , assembly of mechanical seal