Latest mechanical fabrication Tenders | Government mechanical fabrication Tenders

State Government

CTN :45366419

18 Jun, 2026 1.23 Crore

Gandhinagar - Gujarat

Tender For providing fabricating and erecting of new horizontal girders wire rope rubber seal including dismantling of old, replacement of cdu- dhu unit and eru unit with parts like 15 hp diesel engine-r gear box, tyre coupling all plummer block with sleeve and bearing dial indicator railing at d.s wall and new railing at inspection gallery etc. as per drawing and specification and instruction of engineer in charge of radial gate size:41x27- 6 nos of guhai project

CTN :45371536

06 Jun, 2026 3.61 Lacs

Mumbai - Maharashtra

Tender For providing fabricating erecting mandatory and cautionary boards at various location in beat no. 71 in kw ward

CTN :45360125

05 Jun, 2026 NA

Mumbai - Maharashtra

Tender For providing and fabricating shade of main ot terrace in st. georges hospital campus, mumbai.

corporations/Associations/Others

CTN :45355298

03 Jun, 2026 27.68 Lacs

Mayiladutjurai - Tamil Nadu

Tender For providing structural glazing (refer detail name of work for tender notice) for the work of construction of new district police office building with development works at mayiladuthurai in mayiladuthurai district - fabricating the structural glazing grid electro coloured anodizing using size (2 x1 2.5 to 3 kg), in-pw-tug-gp) fabricating supply and fixing of toughened glass partition grid using (2 x 1 ) aluminium section, in-ele-acp) providing and fixing of aluminium composite panel (acp) having 50x25x1.20mm tk fabricated fixed at all level elevation and heights, in-ele-alu ch) supplying and fixing of aluminum outer frame having 50x25mm 1.2mm tk, aluminum channel of size 50x25 mm plain, 1.2mm thickness, fabricated fixed at all level elevation height extrude section cutting and fixing required space, fw-ss-ahs-2leg) providing two legged scaffolding using 15cm diameter casurina props or best quality bamboo posts of 4m overall length fw-ss-ahs-5.5m b).5.50 m height in addition of 2.5m ht (portico), fw-ss-ahs-10.5m d) 10.50 m height in addition of 2.5m ht (front elevation), in-ele-cir.pill-bw) providing 0.60 mtr dia circular pillar at a height of 6.45 mtr by using country bricks with cement mortor

corporations/Associations/Others

CTN :45346453

09 Jun, 2026 29.95 Lacs

Coimbatore - Tamil Nadu

Tender For improvement works and supplying of kitchen accessories to the amma unavagam at poo market , mettupalayam road in ward no.72 of west zone. - earth work excavation of building in kind of soilsand sup soilsand full depth as may be directed by the departmental officers with initial lift and leads and cleaning and leveling the site., cement concrete 1:4:8(one cement,four sand and eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, supplying and erection shuttering,including necessary supports for plain in all floors using mild steel sheets of size 90x 60 cms and bg 10 stiffed with surfacewelded mild steel angles for boarding supported by casuarina props at suitable intervals etc. completecomplying with standard specifications as directed, for plinth beam, for lintel beam slab, for vertical walls, cement concrete 1:1.5:3 (one cement,one and half sand and three aggregate)using 20mm gauge hard broken granite stone jelly for all rcc items of work excluding centring, shutteringand cost of reinforcement grill but including fixing fan clamps and fixtures in rcc works wherever necessary as per the direction of departmental officers complete, cement concrete 1:2:4 (one cement, two sand and four aggregate ) using 20mm hard broken granite stone jelly for all pcc items of work etc., complete fixturas directed by departmental officer ., supplying,fixing and placing in position mild steel /ribbed torsteel rods for all rcc works including cost of steel and binding wire also in all floors,complete complying with standard specifications(upto 16mmdia rods), fly ash brick work in cm 1:4 (one cement & four sand) using size 9"x4 3/8"x2 3/4" including finishing,curing,etc., complete complyingwith standard specification., plastering with cement mortar 1:3 (one cement and three sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications, plastering with cement mortar 1:5 (one cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications, finishing the floor with 20mm cement concrete ( ellis pattern rst sort - no sand to be used) etc complete as directed., supplying, fabricating, erecting structural steel work for roofing welded or bolted type using ms channels, angles, plates and roundbars etc. conforming to is specification including primer coating and enamal painting as per design given by the departmental officers etc, complete as per standard specification., supplying and roofing with pplg sheet of selected colour fixed to required profile inclusive of brackets and screw arrangements etc.,complete, supplying and erecting pull and push type rolling shutter with i.s.i. make of approved size and section using 18 gauge g.i.sheet with manually operated type. the shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc, complete as per standard specification., supply of man hole cover and frame is 12592 including fixing etc. extra heavy duty circular (228kg) 600 mm dia, supplying and fixing in position cement based hydrualically pressed anti skid tiles (pattern design) 20mm thick in cement mortar 1:3 (one part of cement and three part of plastering sand (p-sand)), 20mm thick and pointed with same colour of cement etc., complete as per standard specification, dadooing the walls with first quality approved coloured glazed tiles of size 150x150x6mm laid in cement motar 1:2 mix to 10mm thick and pointing with white cement using 0.40kg per sqm including finiching the joints and surface etc., complete, flooring finishing with first quality ceramic tiles of all colours of size 305cm x 305cm x 6mm laid in cement motar1:3 mix to 20mm thick and painting with cement paint using 0.3kg 1m2 including finishing the joi

State Government

CTN :45325858

09 Jun, 2026 96.40 Lacs

Gandhinagar - Gujarat

Tender For providing, fabricating, supplying, erecting, testing and commissioning 50 mt capacity gantry crane with complete electrification work including control panel, control cables, cable reeling drum, all cable etc. for 50 m gantry crane for operation of spill way stop log gates of sipu reservoir project as per drawings & specifications.

State Government

CTN :45328878

01 Jun, 2026 NA

Multi City - Haryana

Tender For providing and fabricating ms cage for leopard for wildlife division gurugram

State Government

CTN :45342979

17 Jun, 2026 1.60 Crore

Rajkot - Gujarat

Tender For dismantaling providing fabricating and erecting various component such as gate leaf assembly including skin plate horizontal girder stiffner end vertical plate rubber seal main roller guide roller base frame of cdu dhu and other miscellaneous work of vertical gate 30 x 10 of ozat wier vanthli scheme

State Government

CTN :45346893

18 Jun, 2026 48.56 Lacs

Jabalpur - Madhya Pradesh

Tender For providing fabricating filling filter media testing and commissioning of 02 numbers horizontal type m s body pressure filter each half mgd capacity in place of existing damaged pressure filter tank at water treatment plant nayagaon mppmcl jabalpur

Central Government/Public Sector

CTN :45314789

25 May, 2026 NA

Hyderabad - Telangana

Tender For supplying, fabricating and fixing in position aluminium sliding window/s with aluminium diamond grill mesh at the landings / mid-landings of staircase at rbi staff quarters, yellareddyguda, hyderabad (date of nit available: may 22, 2026)

Mechanical Fabrication Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors