Latest mechanical shifter Tenders | Government mechanical shifter Tenders

Corporations/Associations/Others

CTN :45700597

01 Jul, 2026 NA

Chandrapur - Maharashtra

Tender For material supply for water supply department municipal council mul (3rd time) - ci marerial list, 350mm mechanical joint coller, 350 mm tailpiece, 350mm valve, 350 mm all flange tee, 350mm*350mm*80mm tee, 300mm mechanical joint coller, 300 mm tailpiece, 300mm valve, 300 mm all flange tee, 300mm*300mm*80mm tee, 250 mm mechanical joint coller, 250 mm tailpiece, 250 mm valve, 250 mm all flange tee, 250 mm* 250 mm*100mm tee, 250 mm* 250 mm*80mm tee, 150 mm mechanical joint coller, 150 mm tailpiece, 150 mm valve, 150 mm all flange tee, 150 mm* 150 mm*100mm tee, 100 mm mechanical joint coller, 100 mm tailpiece, 100 mm valve, 100 mm all flange tee, 100 mm* 100 mm*100mm tee, 350 mm bend, 300 mm bend, 250 mm bend, 200 mm bend, 150 mm bend, 100 mm bend, 350mm di k9 pipe, 300 mm di k9 pipe, 250mm dik9 pipe, 150 mm dik7 pipe, 100 mm di k7 pipe, nut bolt, washeer, reducer 350*300, reducer 300*250, reducer 250*150, reducer 150*100, dummy flange 350 mm, dummy flange 250 mm, dummy flange 200 mm, dummy flange 150 mm, dummy flange 100 mm, air valve 80 mm, air valve 40 mm, air valve ball 4 inch, air valve ball 3 inch, rubber ring 350 mm, rubber ring 300 mm, rubber ring 250 mm, rubber ring 200 mm, rubber ring 150 mm, rubber ring 100mm, rubber sheet, nut bolt with washer 3 inch 4thread and 5thread, nut bolt with washer 4 inch 4 thread and 5thread, nut bolt with washer 9 inch full thread, nut bolt with washer 12 inch full thread, pvc material, pvc mecanical joint 100 mm, pvc mechanical joint 180 mm, pvc pipe 90 mm 6 kg/cm2, pvc pipe 150 mm 6 kg/cm2, pvc 90 bend 90 mm, pvc 90 bend 150 mm, hdpe material, hdpe pipe 110 mm per mtr, hdpe pipe 90 mm per mtr, hdpe pipe 125 mm per mtr, hdpe pipe 160 mm per mtr, hdpe pipe 180 mm per mtr, hdpe pipe 225 mm per mtr, couplers 90, couplers 110, coupler 125, coupler 160, couplers 180, couplers 225, couplers 125, couplers 160, equal tee 110, equal tee 180, equal tee 225, elbow 90 deg. 110, elbow 90 deg. 180, elbow 90 deg. 225, end cap 110, end cap 180, end cap 225, 225*180 reducer, 180*110 reducer, 225*100 reducer with fusion, 110*90 reducer with fusion, 125*110 reducer with fusion, 110*75 reducer with fusion, connection material, hdpe saddle taping tee 110 mm, hdpe saddle taping tee 180 mm, ferule 0.5 inch, ft 0.5 inch, mdpe pipe 0.5 inch per mtr, mdpe bend 0.5 inch, mdpe coupler 0.5 inch, mdpe valve 0.5 inch, upvc pipe 0.5 inch, upvc bend 0.5 inch, upvc coupler 0.5 inch, pvc saddle 0.5 inch 110 mm, pvc saddle 0.5 inch 160 mm, pvc saddle 0.5 inch 180 mm, upvc valve 0.5 inch, solution per ltr, upvc brass socket 0.5 inch, upvc brass elbow 0.5 inch, pvc socket 0.5 inch, pvc elbow 0.5 inch, pvc mt 0.5 inch, upvc union, pvc tap, teflon tape, upvc socket 0.5 inch, upvc elbow 0.5 inch, end cap pvc/upvc, water meter washer rubber, mdpe washer, borewell material, rod assembly, head with cover, water tank, handle bar, thread play, tox with n ut, rod coupling, cylinder body cap and base lever, cylinder rod, chain with nut, upper valve assembly, floor valve uv, washer uv, lower valve assembly, rubber set, check valve, tikli avuv, pump bucket lether, sealing ring, 12 to 40 mm nut wheel (bolt) per kg, connecting rod, 32 mm gi pipe isi mark, borewell socket 1.25 inch, hand pump set complete isi mark, bearing, axle pin no 6204, borewell cylinder isi mark, lever, ring rubber washer, karori leteher washer, borewell chain spanner 100mm, borewell chain spanner 75 mm, borewell threading machine, chain pully 3 ton long chain, wise large size 4 size, chamber for borewell cement concrete /brick masonaary, di pipe 350mm, sluise valve 100mm, sluise valve 150mm, sluise valve 200mm, sluise valve 250mm, ci joint 350mm, ci joint 250mm, ci joint 100mm

Corporations/Associations/Others

CTN :45723888

07 Jul, 2026 NA

Katol - Maharashtra

Tender For supplying materials for maintainance in water supply department for fy 2026-27 (as per daily requirement)- gi pipe (class b, isi marked), gi bend (class b, heavy, isi marked), submersible gi coupling (heavy class, isi marked), gi reducing socket (heavy), pvc pipe (6 kg/cm²), pvc pipe (25 kg/cm²), pvc pipe (10 kg/cm²), ci flanged valve (heavy), pvc fta (10 kg/cm²), pvc bend (6 kg/cm²), pvc reducing socket (heavy, 6 kg/cm²), ci df sluice valve (isi 780-1994, heavy duty), ci detachable joint (complete set), nut-bolt, pvc solution (kisan), packing rope, acc pipe (class 15, isi marked), ci pipe (la, isi marked), ci special fittings (isi marked), rubber sheet, lead, air valve (isi marked, 25 mm), ci saddle piece (150 mm & 25 mm), gate valve (heavy), pvc tee, gi nipple, pvc saddle, pvc elbow, nylon rope, torch, holiday daba, greece, lokhandi angle bar and strap, g.i.lokhandi chaddar, g.i. miter box, air duct, motor pipeline pressure clock, air whale middle ball, hose pipe, hose nipple, pvc end cap, football, football jeep, air wall cdm , p.v.c.m.t.a., g.i. coupling, pungali pana sat, alanki pana sat, ring and fit pana sat, screw nut, die frame, dye gulps, saw frame lokhandi, saw blade, hand drill machine, hand drill machine electric, drill machine beat, voice, water body and haat pampachi full body fitting, hand pump connecting rod, hand pump chain, hand pump upper wall set, hand pump socket, hand pump handle, hand pump head, hand pump bearing, hand pump reducer cap, hand pump bucket wiser, hand pump globe whale, hand pump axle pin, hand pump wiser, hand pump rubber titan, hand pump water tank, hand pump cylinder, g.i.pipe b class, lokhandi road, spindle, motor pump starter & material 3 phase motor pump company texmo aquatax helen openwell submersible motor pump, openwell monoblock motor pump, borewell submersible, 1 phase motorpump openwell submersible motor pump, openwell monoblock motor pump, starter, ltlk relay range, ltl timer coil and timer assembly, ltl insect point pocket, ltl relay 4 to 33, l.t.l.m.n.releche plastic button, ltl starter button knob, ltl simple, water sill, submersible motor bearing fiber cap, submersible bush, , , , old meter and ampere meter, old and ampere meter box compliant, monoblock motor pump coupler rubber bush, , , , , condenser capacitor mfd, , , , , , , , , , single phase auto switch lcb ampere 16 to 20, 3 phase auto lcb 17 to 20, 3 phase e.l.c.d. ampere 16 to 32, capacitor, , , , , , ltl auto switch 200 amps, wire, , , , , , , cable, , , , auto wire bundle, kit kat, , , , , , switch khosla 15 amp, plug khosla 15 ampere, pvc tape roll bundle, water supply joint tape roll bundle, rubber gasket 3'' 4'' 6'', everyday sale daba (20 nos.), g.i. tap, , , , snoring, wire brush, c.i.pipe, , , , , c.i.mechanical bend, , , , , c.i.mechanical t, , , , , p.v.c. adapter (tail piece), , , , , si. income. mechanical joint, , , , , tikas danda, spade stick, plastic bucket, lokhandi bucket, rubber titan, rubber gasket, g.i.wire, g.i.elbow, , , , , g.i.union, , , , , plasto syntex talkie, 4 coats with finish, , , , finolex pipe, , , , , , , , water meter, , , ferrule plate, , , , control panel star delta 14 to 31 amp, control panel single phase 5 to 21 ampere, m.sil. packet 100 grams, bean coke, monkey pliers, cannes, , , pvc m.t.a., , , , , , , , , , , lokhandi vicere, rabari vicere, rubber titan , get pipe range, , , , , , nut bolt 4 sut x 3'', nut bolt 4 sut x 5'', g.i. nipple, , , , , , , , , , , lock, small per piece, big per piece, getting a bandage, , , , , , , , , , , find peace, , , , , , , , , , , , , , g.i. elbow, 1 inch, 1/2 inch, 3/4 inch, 1 1/2 inches, 2 1/2 inches, 2 inches, 3 inches, 4 inches, 5 inches, 6 inches, ,-s.t.m. pipe, , , , , , e.s.t.m. tea, , , , , , e.s.t.m. elbow, , , , , , , , , , , , e.s.t.m. reducer, , , , , , e.s.t.m. brass threaded tee, , , , , , e.s.t.m. brass threaded elbow, , , , , , e.s.t.m. brass threaded socket, , , , , , e.s.t.m. brass threaded reducer, , , , , , ,p-m

Central Government/Public Sector

CTN :45724574

08 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For procurement of pressure parts attachment for boiler pressure partsnstps nabinagar - mechanical spacer bar,0651/5,alstom, mechanical spacer bar,0651/6,alstom, u-rod,0641/8,alstom, mechanical spacer bar,0651/5,alstom, mechanical spacer bar,0651/6,alstom, u-rod,0651/8,alstom, flexible tie,0631/6,alstom, support lug,0631/7,alstom, scalloped lug,0631/8,alstom, mechanical spacer bar,1211/5,alstom, mech spacer bar,1211/6,alstom, u-rod,1211/7,alstom,2mm, mechanical spacer,0701/ms-1,alstom, u-rod,0701/ur-1,alstom, mechanical spacer,0701/ms-2,alstom, mechanical spacer,0701/ms-3,alstom, mechanical spacer,0701/ms-4,alstom, mechanical spacer,0621/ms-3, mechanical spacer,0621/ms-1, mechanical spacer,0621/ms-2, mechanical spacer,0621/ms-4, u-rod(dia 12),0621/ur-1, u-rod(dia 12),0601/ur-1, mechanical spacer,0601/ms-1, mechanical spacer,0601/ms-2, mechanical spacer,0601/ms-3, mechanical spacer,0601/ms-4, u-rod(dia 12),0611/ur-1, mechanical spacer,0611/ms-1, mechanical spacer,0611/ms-2, mechanical spacer,0611/ms-3, mechanical spacer,0611/ms-4, snubber plt,1061/f-13/6,thk 10,alstom, snubber plt,1061/f-13/7,thk 10,alstom, u-rod,1061/f-13/9,dia 12,alstom, 10 thk snubber plate,1051/f-12/1,alstom, 10 thk snubber plate,1051/f-12/2,alstom, dia 12 u-rod,1051/f-12/3,alstom, spacer lug,01280302302&01,bhel/ge, shaped plate,01280302302&02,bhel/ge, shaped plate,01280302302&03,bhel/ge, shaped plate,01280302302&04,bhel/ge, tube sleeve,01280302302&06,bhel/ge

Central Government / Public Sector

CTN :45736534

21 Jul, 2026 NA

Guntur - Andhra Pradesh

Tender For supply of mechanical sleeper spacer device with minimum closing length: 260mm, maximum opening length: 450mm, support plate thickness: 12mm hole dia. for tomy bar: 28mm tomy bar length for operation: 1meter approximate weight: 12 kg. steel material: en19 hardened (this steel confirms to is:5517-1993 grade 40cr 4mo3 steel.) output: 5 ton. make: asm hi rel solutions-ahmedabad or similar. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45730207

22 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of flowmwter of kromschroder make with model no dm 400 z100 40 or exactly equivalent in other makes krom schroder/madas/honeywell/maxon and eclipse with the following specifications nominal flow rate (qn): 400 cubic meter/h, measuring range: -32 - 650 cubic meter/h, display: mechanical counter with optional pulse output, maximum operating pressure (pu max): 4 bar (gas and air), pulse generator: e1 and e200 compatible for integration with monitoring/control systems, meter type: turbine/mechanical flow meter (dm series) with paddle or rotor mechanism that drives index display, dn (nominal size) 100 flange or intermediate connection size connection size 100 standard nominal connection (z100 indicates pipe 100 mm) length - 150 mm body length between connection faces height to top of counter - 165 mm vertical dimension to instrument/mechanical index body height - 80 mm height of the main body excluding index. weight: approx. 10 kg note: (1) tenderer shall quote along wiyh the technical/dimensional catalogue and adc. (2) only oem/authorised dealers of oem shall participate in the tender. [ warranty period: 18 months after the date of delivery ] ]

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

CTN :45726004

13 Jul, 2026 NA

Tirunelveli - Tamil Nadu

Tender For purchase of mechanical lab equipments - hydraulic cylinder - bore diameter : 50 mm , stroke length : 250 mm, working pressure : 160 bar , cylinder tube : honded steel , piston rod : hard chrome plated , seals : standard industrial seals, end caps : steel, hydraulic operated directional control valve (dcv) - type: manual spool type dc valve, configuration : 4/2 way, size : ng06(cetop 3) , rated pressure : 210 bar, flow capacity: 20 - 40 lpm, body: hardened steel / cast steel, spool: ground and hardened, ports : clearly marked ( p, a, b, t ) , supply : mounted on training plate , suitable for dismantling and study, a) sliding mesh gear box for dismantling and assembing - max transmitted power 1 to 1.5 hp , torque capacity - 40 to 200 nm,number of speed 3 to 6 , gear module 1.5 to 2 , . gearbox type : sliding mesh forward gears - 3, reverse - yes, gear material - alloy steel, lubrication - splash/ oil, gear teeth : spur, typical gear ratio - 3:2:1 / 2:0:1 /1:3:1, input speed : 0-1800 rpm , housing material : cast iron (b) constant mesh gear box cut section - constant mech gearbox (cut section), gearbox type : constant mech, forward gears : 4 , gear teeth- helical/spur ,dog clutch type - sliding ,lubrication - oil sae 80w90 ,housing - cut section,material -hardened alloy steel, educational features - labelled parts, 3d printer - build volume : 256x256x256 cu.mm ,shell enclosed (plastic & glass ),nozzle 0.4 mm stainless steel included ,max hot end temperature 300 c ,nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm, build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate. max build plate temperature 100 c ,max speed of tool head 500 mm/s ,max acceleration of tool head 20 m/s2 ,supported filament pla, petg,tpu, pva, pet,abs, asa chamber monitoring camera low ,rate camera 1280 x 720/0.5 fps ,timelapse supported ,filament run out sensor : yes, control board fan closed loop control ,auxiliary part cooling fan closed loop control ,air filter activated carbon filter

CTN :45498835

02 Jul, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of oblique 2 inch long for aluminium t oblique l , aluminium t channel powder coated size 1 point 5 inch x 1 point 5 inch having thickness 1 oblique 8 inch , gi wire 4 mm thickness , gi wire 2 mm thickness , aluminum curtain rod 3 oblique 4 inch dia , aluminum curtain rod side holder 3 oblique 4 inch dia as per sample , steel curtain rod 1 inch dia as per sample , ss curtain rod side holder 1 inch dia with clamp and clamping screw and rawel plug 5 mm as per sample , plastic door with frame 0 point 75 x 2 point 1m ready made plastic door as per sample , door frame of size 1point10 x 2point10 m made of hard wood of size 10 cm x 7point5 cm thick as per sample , fly proof wire mesh steel wire dia 24 swg 15m long 4 ft width as per sample , floor door stopper small heavy duty , wooden ply cutting blade , waterproof adhesive sh marine , standard epoxy adhesive 180 gms , vinyl flooring sheet 1mm thickness , pbs roll 1 point 5 mm thick 01 mtr width 20 mtr length , oil stone 6 inch x 2 inch x 1 inch , glass cutter mechanical , tinted toilet window glass pan 6ft x 4ft x 3 mm , glass pan 6ft x 4ft x 4 mm , glass putty , looking mirror 2ft x 4ft aluminium beading as per sample , looking mirror 2ft x 1 point 5ft aluminium beading as per sample , ravel plug pvc 4mm oblique 6mm , door handle aluminium 4 inch , haxsaw blade 1 oblique 2 inch high speed 1ft long appx , haxsaw blade 1 inch high speed 1ft long appx , epoxy compound putty sealant adhesive for leakage 100 gm , suction pump for clearing blockage bathobliquetoilet 3 inch dia , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm colour sky blue , pgi sheet 8ft x 3ft x 1mm , tower bolt aluminium 6 inch , tower bolt aluminium 8 inch , tower bolt aluminium 10 inch , door closer helical as per sample , door closer hydraulic as per sample , sliding bolt 12 inch , sliding bolt 8 inch , handle consealed 4 inch , handle folding 3 inch , plastic bush 2 inch length and thick 12 mm , ss screw 1 oblique 2 inch 500 nos , ss screw 3 oblique 4 inch 500 nos , butt hinges ss 3 oblique 4 inch x 3 oblique 4 inch x 3 inch , tower bolt 4 inch , curtain socket one side 1 inch matki , ss handle 6 inch , ss handle 4 inch , furniture pvc edge band tape 3 oblique 4 inch ivory 50 mtrs , furniture pvc edge band tape 3 oblique 4 inch wooden 50 mtrs , sand paper 120 oblique 100 , ceramic tiles 0 point 30m x 0 point 30m x 6 mm thick , ceramic non skid tiles 0 point 30m x 0 point 30m x 6 mm thick , vertified tiles 0 point 60m x 0 point 60m x 8 mm thick , vetrified tiles 0 point 30 x 0 point 30 x 6 mm thick white colour , wall tiles 0 point 45 x 0 point 30 x 8 mm thick white colour , inter locking contract block oblique medium traffic precast concrete blocks different colour , wall clading tiles 240mm x 60mm x 9mm different colour , j hook 6 inch half threaded with nut and washers 8 mm , dr fix it , ultimate woodworking adhesive sh , dha iron appx weight of 01 kg , spade appx 1 kg wt , showel with handle appx 1 kg wt , pick axe appx 2 point 50 to 3 kg wt , crow bar 5ft long , plumb bob , mason thread plastic , spirit level size 12 inch , stabila spirit level type 70 mm , mason hammer 1 kg mbt riveting hammer head , mason hammer 1 point 5 kg , mason trovel small size , mason trovel iron big size , water level pipe 8 mm dia , road delineator with solar , speed braker rubber , 3 m cat eye indicator , road sign boards sample and drawings to be collected from work section , half round file 1 point 5 inch , right angle 12 inch , screw driver set of 6 pieces , cutting wheel 4 inch dia for angle grinder , construction black safety gumboots dash //bid details 2 / 116 black size 9 , dustless chalks white 100 no per pkt , tile cutting blade , carbon bush for tile cutting machine , tile cutting machine 120mm , ms square pipe 70mm x 70mm x 2 point 6mm th 6mtr length , ms square pipe 50mm x 50mm x 2 poin

CTN :44803091

02 Jul, 2026 NA

Dehradun - Uttarakhand

Tender For bid to ras supply of mechanical items d d - cover al8050587 lf 7440201139 , plate al8060891 lf 7440201459 , support bl8128137 lf 7440205891 , support bu47k2166 lf 7440206130 , support bs15m012 lf 7440206147 , support kt6006-01 lf 7440206149 , lug 52008003-03 lf 7440207470 , bushing 71940300202 lf 7440208902 , screw 71940300003 lf 7440208907 , bush al8228071 lf 7445108148 , support bg29032 lf 7445108203 , bar assy al6420110 cb lf 7445161481 , eye bgi29-2s091 lf 7445701575 , clamp 9s831243 lf 7446101128 , bush b11041 lf 7446101140 , screw kh1- 11639 lf 7446101165 , clamp nbl8667039 lf 9001080320

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Mechanical Shifter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

Corporations/Associations/Others

Central Government/Public Sector

Central Government / Public Sector

Central Government And Public Sector