Get complete information related to latest Mechanical Spares Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Mechanical Spares Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Mechanical Spares Tenders.
Tender For auction sale of rolling stock - coaches - scrap cond. under aged/over aged, burnt bg 8-wheeler icf/rcf/beml/lhb coaches without wheel sets cum trolleys and other mechanical, electrical rc items. coach nos are (1) 93736 re, 2] 037106 wgaccn, 3] 997424 gs, 4] 997728 gslr, 5] 05410 c gs, 6] 216660 ls, 7] er218640 lvph, 8] nr 215392 lvph. ds-8 nos 013778-25-37431,37427 dt. 12.03.2026, 013778-25-35481, 35474, 35485, 35491,35456, 35454, dt.25.02.2026. total weight of 08 coaches - 198.6719 mt approx. [ms-120.7286 mt approx., aluminum=5.0007 mt approx., copper=0.1997 mt approx, ss=2.327 mt approx., decolums, compreg sheet, wool and limpet, berths, seats and rexene=13.2 mt approx., corten/mild steel-26.3195 mt approx., ss ferritic 409 m-24.6026 mt approx., ss austenitic 304 -6.2938 mt approx.,]. loc- lying on the track at tata siding mly. note- 1] the purchaser is strictly instructed to stack all the rc items at one location well away from the cut-up parts of the coaches and the custodian is advised to lift the same on the day of delivery affected. [before affecting/ commencing/starting of the delivery itself]. 2] the purchaser is responsible for providing adequate safety firefighting equipment on the spot at the time of cutting and delivery. the purchaser shall be liable to make good any damage/loss caused to railway property during cutting or delivery. 3] railways are not responsible for any shortage. 4] any reclaimable items found in excess to the below, at the time of cutting and delivery of coaches should be returned to railways 5] the purchaser is instructed to remove all debris arising from cutting of the lot purchased, from the cutting/loading spot and keep the delivery spot neat and clean before the final lorry delivery, failing which, the final lorry will be stopped. 6] it is advised that all witnessing officials has to sign the debris clearance certificate at the time of closing delivery order. 7) delivery by number basis.8] as per railway boards letter dt.23/12/2021, 3 days advance intimation is to be given to rpf for witnessing of deliveries. the same has been reiterated by dsc/rpf/sc vide letter dated 22/09/2025. firms are therefore requested to take this period into consideration while uploading their requests for delivery so that deliveries are completed on time, well within the fdp.9] free delivery period of 80 days is approved by cmm/t vide note no.6 dt.2/06/2026 in e-file no.559446. pl no. 98111061. hsn code 72042910. available under sse cnw sc, state tg dist. hyb
Tender For corrigendum : procurement of mechanicalspares for sany make sy210c-9 model 0.9 cu.m hydraulic shovel working under noncost cap at ocp-iii rg-ii on proprietary basis
Tender For supply of misc mechanicalspares at ajmer lpg plant -supply washing unit pump kirloskar 2 hp monoblock , supply valve changing unit shaft , supply of 380 mm shaft , supply of telescopic boom dead man plate , gi pipe 2 inch thickness 3 to 4 mm , supply of 48 head carousel shaft inlet outlet , quarter turn worm gear box for rotary valve model mb15 10 inch , supply of 1mm gi tray with bend , 2 inch ball valve class 150 flange type , valves class 150 4inch flange type , valves class 150 6inch flange type , valves class 150 8inch flange type , valve class 150 2 inch thread type , valve 300class half inch thread type , valve class 150 1.5inch thread type , nrv class 150 2 inch flange type , nrv class 150 3inch flange type , nrv class 150 8inch flange type , nrv class 150 2 inch thread type , cu jumper lpg pipe flanges , flp pressure switch 1 10 kgbycm2 , double pilot solenoid valve 24 v dc , reducer socket 1inch half inch 300class sw , reducer socket 3 by 4 inch half inch 300 class sw , brass locks , reflective type wind socks 36inch dia , foot valve 2 inch , sprinklers nozzles k64 , quick release valve , frl 1by2 inch , spark arrester 3inch , spark arrester 4inch , metallic float 6inch , tee half inch thread ends , hex nipple half inch , socket half inch , blind plug half inch , ms pipe half inch , double valve for tsv , valve class 150 3 by 4 inch thread type , hex nipple 3 by 4 inch , srv for air receivers , efcv 300class half inch , quartziod bulb , jet nozzles , safety belt double harness , low temp hand gloves , convex mirrors dia 800mm , earmuffs , cable glands 1inch , cable glands 3 by 4 inch , acrylic sheet transparent 3mm , 1 inch ball valve , supply of 340 mm shaft , 14 teeth sporcket with assebmbly bush , 14 teeth sporcket with assebmbly bearing * /bid number : gem/2026/b/7683794 + /dated: 18-06-2026 ' ' / bid document 1 / 38
Tender For procurement of pneumatic & mechanicalspares at ahmedabad bottling plant, sanand - filter regulator lubricator 1/2" , filter regulator lubricator 0.25 inch , pu tube 4 mm , pu tube 6 mm , pu tube 8 mm , pu tube 10 mm , pu tube 12 mm , elbow fitting 4x0.25 inch , elbow fitting 6x0.25inch , elbow fitting 8x0.25 inch , elbow fitting 10x0.25 inch , elbow fitting 4x0.125 inch , elbow fitting 6x0.125 inch , elbow fitting 8x0.125 inch , elbow fitting 10x0.125 inch , elbow fitting 6x1by 2 inch , elbow fitting 8x1by2 inch , elbow fitting 10x1by2 inch , elbow fitting 6x3by8 inch , elbow fitting 8x3by8 inch , elbow fitting 10x3by8 inch , straight fitting 4x1by4 inch , straight fitting 6x1by4 inch , straight fitting 8x1by4 inch , straight fitting 10x1by4 inch , straight fitting 4x1by8 inch , straight fitting 6x1by8 inch , straight fitting 8x1by8 inch , straight fitting 10x1by8 inch , straight fitting 6x1by2 inch , straight fitting 8x1by2 inch , straight fitting 10x1by2 inch , straight fitting 6x3by8 inch , straight fitting 8x3by8 inch , straight fitting 10x3by8 inch , tee fitting 4x4x1by4 inchmm , tee fitting 6x6x1by4 inch mm , tee fitting 8x8x1by4 inch mm , tee fitting 10x10x1by4 inch mm , tee fitting 12x12x1by4 inch mm , tee fitting 4x4x1by8 inchmm , tee fitting 6x6x1by8 inch mm , tee fitting 8x8x1by8 inch mm , tee fitting 10x10x1by8 inch mm , tee fitting 4x4x4 mm , tee fitting 6x6x6 mm , tee fitting 8x8x8 mm , tee fitting 10x10x10 mm , tee fitting 12x12x12 mm , push and pull type pneumatic switch , 5/2 hand lever type pneumatic switch x , double pilot valve 5by2 x 1by4 inch , single pilot valve 5by2 x 1by4 inch , or gate 1by4 , pneumatic cylinder 50 x 450 non-magnetic , pneumatic cylinder 50 x 250 non-magnetic , pneumatic cylinder 50 x 300 non-magnetic , pneumatic cylinder 50 x 320 non-magnetic , pneumatic cylinder 63 x 80mm non-magneti , pneumatic cylinder 50 x 80 mm non-magnet , pneumatic cylinder 125 x 300 mm non-magn , pneumatic cylinder 50 x 125 mm non-magne , pneumatic cylinder 50 x 320 magnetic typ , pneumatic cylinder 50 x 500 magnetic typ , pneumatic cylinder 63 x 160 mm magnetic , quick exhaust valve 1by2 inch , quick exhaust valve 1by4 inch , quick exhaust valve 3by4 inch , pnuematic cylinder 50x300 with profile f , dnc festo 40 cylinder seal kit , smc cylinder 50 seal kit , norgren cylinder 50 seal kit , smc cylinder 63 seal kit , festo cylinder 50 seal kit , pneumatic connector 14x1/2 , pneumatic connector 12x3/8 , pneumatic connector 10x3/8 , pneumatic connector 8x3/8 , solenoid valve with 3/2 valve 24vd , solenoid valve with 5/2 valve 24vd , ss304 angle valve 1/2" , spring for self centering , baliga, has, teflon hose (600 mm) , baliga, has, hot air gun (hylum) , plumber block w/ brg, 213-65mm, conveyor , plumber block w/ brg, 212-60mm, conveyor , bearing unit, ucp-213 , bearing, pillow block, ucp 212, ntn , uhmw strip 40mmx10mmx3000mm , roller, teflon, p/n:e24-10001 , pressur gauge 0-16 kg 6 inch , pressure gauge 0-28kg, dial 6 inch , pressure gauge 0-16 kg, dial 4 inch , pin, chain, en-24, conveyor , ms 60 mm bore 32 teeth duplex gear , ms 60 mm bore 38 teeth duplex gear , duplex sprocket 65mm x 32 teeth , duplex sprocket 65mm x 34 teeth , duplex sprocket 65mm x 36 teeth , duplex sprocket 65mm x 30 teeth , duplex sprocket 58 mm x 18 teeth , duplex sprocket 58mmx 20 teeth , duplex sprocket 58 mm x 24 teeth , introduction stopper assembly , hexnipple-1/2"npt(m)to 1/2"bspt(m) , jaw coupling 110 no , jaw coupling 150 no , sprkt chain, duplex drive gear, 1inpitch , ms 2.5 mtr c channel for conveyor , ms angle for conveyor 40mm x 40mm x 6mm , lock nut 16 mm bsp thread , csk bolt 8x35 mm with nut washer , csk bolt 10x60 mm with nut washer , o ring inserter tool , shaft with key, conveyor, 60x65, length-850 , shaft for helical gear 60 mm bore length , alen bolt m6x 25 (full thread) with lock nut , alen bolt m6x 40 (full thread) with lock nut , alen bolt m8 x 25 (full thread) with lock nut , alen bolt m8 x 40 (full thread)
Tender For supply of pneumatic and mechanicalspares for indane bottling plant quilon -push in type straight connector 12 mm to 8 mm , quick exhaust with silencer 1 by 4 inch , exhaust air flow controller 1 by 4 inch , pu tube 4 mm 100m , pu tube 6 mm 100m , pu tube 8 mm 100m , pu tube 10 mm 100m , pu tube 12 mm 100m , limit switch long roller lever , knob 3 port valve pneumatic manual control valve one touch fitting 6mm to 6mm , 5 by 2 hand lever operated valve with detent with port size 1 by 8 inch , 5 by 3 hand lever operated valve with spring centered 1 by 4 inch exhausted , 5 by 2 hand lever operated valve with detent with port size 1 by 4 inch , 5 by 2 pneumatic pilot operated valve with port size 1 by 4 inch , 5 by 2 double pneumatic pilot operated valve port size 1 by 4 inch , 5 by 2 sov with coil 1 by 4 inch pneumax xmx5 , push button pneumatic relay mechanical valve 1 by 4 , or gate pneumatic port size 1 by 8 inch , and gate pneumatic with through hole mounting , valve for limit switch sv 3 m5 festo , pneumatic limit switch valve port g 1 by 4 inch with mounting for conveyor line , pneumatic delay timer valve festo vz3 pk3 , pneumatic timer , iso profile pneumatic cylinder 50dia x 80 mm , iso profile pneumatic cylinder 50dia x 100 mm , iso profile pneumatic cylinder 50dia x 160 mm , iso std. profile cylinder 50 dia x 300 mm , iso profile pneumatic cylinder 50dia x 320 mm, magnetic , iso profile pneumatic cylinder 50dia x400 mm , iso pneumatic cylinder 63dia x 50 mm , iso pneumatic cylinder 63dia x 75 mm , iso pneumatic cylinder 63dia x 100 mm , smc pneumatic cylinder cp96sdb40 300c , smc pneumatic cylinder cp96kdb40 400c , smc pneumatic cylinder cp96sdb50 50c magnetic , smc pneumatic cylinder cp96sdb50 300c 50x300 magnetic , smc pneumatic cylinder cp96sdb50 350c , smc pneumatic cylinder cp96sdb50 450c , smc pneumatic cylinder cp96sdb50 550c , smc pneumatic cylinder cd55b63 80m , norgren pneumatic cylinder pra 802050 m 450 , seal kit for 50mm dia pneumatic cylinder norgren part no pra 802050 m 450 , seal kit for 50mm dia pneumatic cylinder smc make , seal kit for 50mm dia pneumatic cylinder janatics make , seal kit for 63 mm dia pneumatic cylinder norgren make , seal kit for 63 mm dia pneumatic cylinder smc make , seal kit for 63 mm dia pneumatic cylinder janatics make , seal kit for 40mm dia pneumatic cylinder smc make , deadman switch janatics dp04sr61 , supply of pneumatic drag chain for conveyor with inner width 100 to 150 mm and inner height 30 to 50 mm , ucp 213 ntn bearing , ucp 212 ntn bearing , ucp 210 ntn bearing , bearing p212 , bearing p213 , nylon stopper roller with s.s bush fitti 80x40x28 , conveyor shaft with key dia 65mm length 850mm to 870mm key slot as per requirement material grade en8 9 as per ioc sample , head sprocket 14 teeth 65mm dia , tail sprocket 8 teeth , conveyor chain detachable type , chain pins , ms 2.5 mtr c channel for conveyor , twin arm stopper set with cylinder , stopper set arrow type right angle stopper , wt24-2x400 diffuse sensor sick , wl24x430 reflective sensor sick , wll24x430 optical sensor sick , sxe 9561 a86 00 solenoid valve with coil norgren , kosan loadcell flintec pc6 200kg , 40 mm bore ms idler shaft 500 mm , 40 mm bore ms idler shaft 400 mm , 40 mm bore ms idler shaft 380 mm , 40 mm bore ms idler shaft 350 mm , 40 mm bore ms idler shaft 300 mm , stud w nut is1363 cs m16x100mm , bolts allen head a193 gr b7 m6x30mm , m6 x 35 csk allen bolt and nut ht ms , bolt allen hd as is367 m8x30mm , m8 x 35 csk allen bolt and nut ht ms , bolt hexhd cs is 1367 m10x40mm , hex nut m10 is1367 //bid details 2 / 87 cl 4 , 12 mm x 40 mm nutwith double washer bolt , ss lock nut 6mm 40mm long nut and bolt , ss lock nut 8mm 40mm long nut and bolt , ms nut bolt for conveyor teflon , boom drive pinion , boom drive shaft , anchor bolt 10 x125 , anker bolt 12 x125 , anker bolt 16 x150 , dead weights pair , bend taper strip 90 deg cs conveyor inner 1550mm , bend taper strip 90 deg cs conveyor outer 1850mm