Mechanical Valve Tenders

Get complete information related to latest Mechanical Valve Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Mechanical Valve Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Mechanical Valve Tenders .

Filter

Loading....

Get Tender in Email

CTN :40557087

20 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For supply of bolt, key wood ruff, adaptor(e3-20-1 by 8), oil seal pilot bearing, kit shim 72.5 odx 65 id (plate xxi c), guide hose lh (plate vi ac), spring torsion, adaptor, kit shim 79.5 od x 72 id (plate xxi c), kit shim 64.5odx 57 id (plate xxi c), rubber pad 30x20x12 (plate iv h), nut 1-1 by 2 inch unf x 27.5 thk, spring steel bush (44.8 odx3), shim, cover battery (plate viii e), cap steering wheel (plate xii f), adaptor 39.5mm long. m by m 1 by 2 inch bsp x 7 by 8 inch sae lvb (, adaptor (plate xiv b), adapter, washer hardened fit under it.2 (jcb super plate , clip worim drive, clip p-clip, 25mm dia (jcb super plate xxi h), bolt banjo, bracket throttle (plate xxiv c), plate sealing (plate xxviii a), seal, washer rebound 16x80x6(plate iii l), key 2.2 mm (plate iv a), seal top ratl window (plate iv t), spacer 50mmx115mmx5.5mm, spacer main shaft seal, screw bleed (plate xxi c), adaptor, hose, baffle pre filter (plate xxx a), hose 400mm (plate xxx b), cap, cover rear steering column (plate xii e), cover steering column front (plate xii e), adaptor 5 by 8 inch bspx1 by 2 inch bsp m m, spacer 50mmx115mmx6.0mm, light number plate, seal door(plate iv u-4), nut rivet m8 (plate iv ao), bolt gr-8.8m12x130 long, spacer (plate v i), bush spring 51.2odx44.8idx70 long, seal, pin boom lock (plate vi v), blanking disc(b4-1-1 by 04), bracket support (jcb super plate xiii p), adapter includes o ring (plate xv c), adapter (plate xv c), spacer 50mm x 115mm x4.5mm, circlip (plate xxi e), dipstick (jcb super plate xxi h), rubber hose 6x12x800 (plate xxiii b), plate master cylinder adapter (plate xxiii c), clip jubille, bracket side panel mounting (plate xxviii b), adaptor lvb (jcb super plate xiii d), mounting rubber, clamp gear lever gaiter (plate x v), ring clamp load (plate x x), adjusting nut, pad wear, lower (plate iii i), pin (plate iii y), mounting bracket fuse (plate iv c), guard hose rh (plate vi e), micro relay change over 12v, micro relay n o 12v, clevis lh thread (plate x d), washer thrust (jcb super plate xii d), adapter g3 by 8a-7 by 8 unf(m)(jcb super plate xiii f), pipe support (jcb super plate xiii p), adaptor (plate xv c), seal(e4-3-5), spacer 50mm x 115 mm x 3.5 mm, spacer lay shaft od 72.5x id 63.5 (plate xxi c), pipe assy 4wd(plate-f5-5-10 by 43), clip 9.5mm dia., pinch type (jcb super plate xxi, thrust washer side gear, needle thrust brg, light interior(c3-10-1), mounting bracket fan (plate iv aj), bush (b3-2-2), liner bearing(ispl sl no-488), knob with switch (plate x v), tee-adaptor, adapter (plate xv c), spacer 50mm x 115mm x4.0mm, plate counter (jcb super plate xxi f), boot air pre cleaner (plate xxvi a), jubilee clip, guide rh (plate vi ac), pad wear, lower fix (plate iii h), plug locking (plate iii i), mounting roof liner assy rear (plate iv f), bush spring 51.2odx44.8idx70 long, hose tank side (jcb super plate xiii h), spacer 50x115x5mm(f1-3-1 by 02), circlip internal (f5-1-30 by 15), seal rear window (plate iv t), guide hose lh (plate vi aa), guide hose rh (plate vi aa), spacer (plate v i), bracket retainer lh (plate iv s), socket mobile charger, cover fuse box (plate iv ae), bush 44.8 idx51.2 odx114 long(os-630), washer spacing (plate v h), plate gauge (plate ix a), reverse horn flasher, shield heat lh(plate x a), shield heat rh (plate x a), plate retainer (jcb super plate xii a), adaptor, adaptor (el-9-13 circuit, auxiliary valve block), hose grease (plate xviii c), seal, nut m30 x 2 static (jcb super plate xviii j), differential nut, spacer main shaft ss750 (plate xxi c), ring seal, connector, benjo(jcb brake system plate g1-1-10), hose hyd oblique oti cooler (plate xxviii a), fuel tank cap (plate iii c), handle lh (ms sl-40), adopter m by m 1 inch bsp, cap side shift stabiliser, nut rivet (plate v b), stainer fuel filter (plate iii c), pin pivot, brake pedal (plate x p), adapter (plate xxi c), adaptor (jcb super plate xiii h), bush(plate-f1-6-1), guard hose lh (plate vi e), clamp, adopter 90 deg elbow (plate-xiii

CTN :40290775

04 Jun, 2025 NA

Nayagarh - Odisha

Tender For bid to ras supply of refrigeration and air conditioning technician - scriber 150mm length , divider spring joint length 150mm , caliper spring joint in side length 150mm , caliper odd leg spring joint length 150mm , surface gauge universal 150 mm , snip sheet metal straight nose 200 mm , snip sheet metal curved nose 200 mm , anvil , stakes different types 100mm , tin smith 400mm , round punch 3mm4mm6mm , rawal plug tool 6 mm , quick couples process tube adopter , tong close mouth and pick , welding table for gas and arc , swaging tool punch type set , bending spring external type , pipe cutter miniature for copper tube , pinch of tool for copper tube , piercing pliers reversing valve with access fitting 618mm , valve key handle 47mm 64mm sq , hollo type punch hole for cutting gasket , t allen key set , pipe cutter with built in reamer and space cutter , pipe tube bender lever type , lapping plate 250mm x 200mm , tap set with matching drills 3 mm to 16mm , tap set with matching drills v to 58inch , heating kit with infrared bulb 200wt , plumbing hammer weight200 gm , piercing valve , four way reversible valve , voltmeter acdc portable precision grade digital , ammeter acdc portable precision grade digital , megger 1000v , wattmeter multi range up 1 kw , kw meter , service oscillator , afo oscillators , pressure gauge digital type , compound gaugedigital type , electronic leak detector , sling psychrometer mounted on aluminum back scale , filler gauge , compressors testers for small hermetic compressors , split phase induction motor , bldc motor with controller , idu pulse generation type motor , capacitor start induction motor , ac 3 phase motor 400 50 hz , star delta starter , auto transformer starter , dol starter , portable air lpg brazing kit , oxyacetylene welding set complete , single door direct cool refrigerator carrying with hfc , single door direct cool refrigerator carrying with hc , frost free refrigerator , threefour door refrigerator inverter type , evacuating and refrigerant charging station , evacuating and charging station , two stage rotary vacuum pump3or 4 cfm , dry n2 cylinder , window ac , split ac , duct able split ac 15 ton , recovery unit with cylinders , cassette air conditioner , de scaling pump set , fan coil unit , shell and tube dx chillers small , circulating water pump small , refrigerant cylinder , gauge manifold with gauges , shell and tube type condenser 5 ton , rotary hermetic compressor 2 ton , bottle cooler visible 200 l , deep freezer 200 l , display cabinet 2 ton capacity , water cooler storage type 200 l carrying with hfc134a , water dispenser bubble type hot and cold , ice candy plant 2 ton , airconditioning direct system , airconditioning indirect system water cooled , package ac 5ton capacity , car ac components full kit , car ac tutorial model , bus ac tutorial model , automatic ice cube mc 50 kghour , storage type water cooler hot and cold , visi cooler 185 l , vrfvrv unit with two indoor units , split ac inverter technology 15 tr , walk in cooler puf insulated for cold room , absorption system

CTN :40396985

10 Jun, 2025 730

Ajmer - Rajasthan

Tender For name of work : reagents/kits/ chemical/glassware/ polyware etc items - reagents/kits/ chemical/glassware/ polyware etc items, albumin (liquid) , end point, linearity 8gm/l, alk. phos. (liq.) ,kinetic, linearity 1200u/l, alt (gpt) (liq) ,kinetic, linearity 600u/l, amylase (liq) ,kinetic, linearity 1500u/l, ast (got) (liq), kinetic, linearity 600u/l, bilirubin (direct) (liq) , fixed time, linearity 8mg/dl, bilirubin (total) , fixed time, linearity 25mg/dl, calcium (liq.) , end point, linearity 15mg/dl, cholesterol (liq.), end point, linearity 1000mg/dl, serum ck-mb kit with calibrator and control (liquid stable or lyophilised reagent reconstitution stability 30 days at 2-8 c immunoinhibition uv kinetic method), linearity 2000 u/l with lyophilised calibrator and control having reconstitution stability 7 days at 2-8 c., ck-nac ,kinetic, linearity 2000u/l, creatinine (liq) ,kinetic, linearity 25mg/dl, gamma-gt (liquid) ,kinetic, linearity 1000u/l, glucose (liq.) , kinetic, linearity 600mg/dl, hb a1c/hb (liquid), with calibrator, end point, linearity 7-23g/dl, hdl cholesterol (liquid) direct clearance method, kinetic, linearity 150mg/dl, ld pyruvate - > lactate (liquid),kinetic, linearity 1100u/l, lipase ,kinetic, linearity 600u/l, phosphorus (inorganic) (liq.) end point, linearity 20mg/dl, total protein (liquid) (mono reagent), end point, linearity 12gm/dl, triglycerides (liquid), end point, linearity 1000mg/dl, urea (liq.) ,kinetic, linearity 300mg/dl, uric acid (liq), end point, linearity 20mg/dl, csf microprotein (liquid stable, ready to use) linearity 400mg/dl.(for fully automatic clinical chemistry analyser), magnesium, end point, ready to use, liquid stable, linearity 50mg/dl, serum ada, multi calibrator for fully auto analyser(for calibration of all biochemical parameters except hba1c , hdl, ckmb. calibrator should be tracable to internationally accepted norms. calibrator will run as per requirement time to time), multi control(low/high /normal) for fully auto analyser(for control of all biochemical parameters except hba1c , hdl, ckmb). above biochemical parameter should be traceable for internationally accepted norms., external quality control, hb a1c control level 1 and level 2, hdl/ldl- cholesterol calib, lipid control level 1, lipid control level 2, serum iron with calibrator & control and tibc ( total iron binding capacity ), total acid phosphatase, g6pd with control, transferrin with calibrator ( serum protein multi .cal) & control (ita sera), ferritin with calibrator & control, ammonia with calibrator & control, ise low/ high urine standard, myoglobin, urine calibrator, urine/csf albumin calibrator, u&csf total proteins red prrogallolcolour 150 ml., crp latex, r1 4 x 30 ml, r2 4 x 30 ml, d-dimer, r1 2 x 12.5 ml, r2 2 x 12.5 ml, crp latex calibrator normal set (level 1-5) 1x2 ml, crp latex calibrator highly sensitive set (level 1-5) 1x2 ml, d-dimer calibrator (level 1) 2x2.5 ml, (level 2) 2x0.5 ml, crp latex control serum (level 1-2) 2x3 ml, d-dimer control (level 1 - 2) 2 x 0.5 ml, starter kits (1+2), wash buffer, reaction modules, light check, il-6, pct, ferritin, d dimer, crp, nt-probnp, vitamin b12, vitamin d3, folic acid (fa), myoglobin, troponin i (ctni), thyroglobulin, pm kit, ise electrode (cl) linearity 191 mmol/l., ise electrode (k), ise electrode (na) linearity 37 &187mmol/l, wash solution, 4x5l(must for 5800 and dxc700 au), cleaning solution 6x450ml, photometer lamp, 12 v, 20 wt(1each)-(must for 480 and dxc 700), sample cup, 2.5ml(pkg of 1000), mixing bar (spiral) au5800, mixing bar (l-shaped) au5800, sample probe(1 each), reagent probe (1 each), s-syringe(1 each), r-syringe(1 each), pinch valve tubing(pkg of 2), mixing bar (spiral) au480/dxc 700 au, mixing bar (l-shaped) au480/dxc 700 au, lithium electrode, hitachi sample cup, polystyrene, highly transparent, non-sticky, 17mm x 38mm or 2ml, white paper laboratory tissue roll(for cleaning of equipments, pattern plain and should be th

State Government

CTN :40491567

11 Jun, 2025 NA

Gandhinagar - Gujarat

Tender For supply of laboratory misc or consumables - acid gloves double dip pvc , bench protector vinyl 30to35x455to465cm , blotting sheet ordinary , blotting sheet ordinary non-absorbent , bottle top dispenser 0point25to2point5ml , bottle top dispenser 5to50ml , bottle top dispenser 20to100ml , brush for cleaning beaker , brush for cleaning bottle , brush for cleaning weigh machine small , bubbler 1to2ml , bubbler natural rubber 5ml , bubbler natural rubber 10ml , bubbler natural rubber 20ml , pipette filler rubber bulb with 3 pinch valve upto 500ml , butter paper , cotton roll absorbent 500g , cotton roll nonabsorbent 500gm , crucible silica 15ml , crucible with lid silica 16ml , crucible silica 25ml , crucible with lid silica 26ml , cryogenic labels 1point3to1point5x 0point6 to0point8 inch , cryogenic labels ss 1point1to1point3x0point4to0point6inch , forceps blunt ss 6inch , forceps blunt ss 8inch , forceps blunt ss 12inch , forceps pointed ss 6inch , forceps ss 8inch , forceps ss 12inch , hand protector grip silicon rubber , heat resistant gloves kevlar 480mm overall length width palm 135mm , heat resistant plates ceramic 151x150mm , ice cube pouch 15to25ml ice cubes , inoculating metal loop with holder metal loop holder nichrome wire 200mm length of holder 2point5mm in dia of loop and 50mm wire length , inoculating metal wire straight with holder metal loop holder nichrome wire 200mm length of holder 40to50mm wire length , inoculating needle 120to150mm length , label 20to30x10to15mm , label freeze tag 12point7mm dots , label freeze tag 25x13mm , label freeze tag 3by4inch 10 meter , labelling tape multipurpose 3by4inch 10 meter , magnetic bead retriever ptfe 30cm , magnetic beads cross spin ptfe 19x19mm , magnetic beads cross spin ptfe 25x25mm , magnetic beads cross spin ptfe 32x32mm , magnetic beads cross spin ptfe 9point5x30mm , magnetic beads round bar with pivot ring ptfe 9point5x40mm , magnetic beads round bar with pivot ring ptfe 9point5x50mm , magnetic beads round bar with pivot ring ptfe 9point5x65mm , magnetic beads round bar with pivot ring ptfe 12point7x38mm , magnetic beads round bar with pivot ring ptfe 12point7x76mm , n95 mask 5 layer filtration membrane technology , mask facial medical 16to18x8to10cm , mortar and pestle with spout porcelain capacity 100ml , mortar and pestle with spout porcelain capacity 1500ml , mortar and pestle with spout porcelain capacity 2000ml , nitrile hand gloves blue nitrile thickness 4mil palm , para film roll 45to55 mmper70to80 meter , para film roll 95to105mmper70to80 meter , petri plate carrier 95to105mmper70to80 meter , petri plate compartment stand ss 5to6 plates , petri plate compartment stand ss 14to18 plates , petri plate rack pp or epoxy coated steel wire , petri seal 10to15mmx 30to35 mper0point5inchx100to120inch , rack thermo conductive metal alloy 1point5ml microtube min 24 places , rackorstand test tube metal alloy 0point2ml 96 places for pcr plate , rackorstand test tube aluminium minimum 12 places 15 mm dia autoclavable , rackorstand test tube aluminium minimum 12 places 25mm dia autoclavable , rackorstand test tube aluminium minimum 24 places 15 mm dia autoclavable , rackorstand test tube aluminium minimum 24 places 25mm dia autoclavable , rackorstand test tube aluminium minimum 36 places 15mm dia autoclavable , scissors surgical aluminium minimum 36 places 25mm dia autoclavable , spatula ss 95to105 mm length , spatula ss 145to155 mm length , spatula ss 195to205 mm length , stand for burette with clamp ss for 25ml burette , stand for burette with clamp ss for 50ml burette , stand for burette with clamp ss for 100ml burette , stand for burette with clamp ss for 125ml funnel , stand for separating funnel ss for 150ml funnel , stand for cod tube ss for min 20plus tube capacity , stand for kjeldahl tube ss for min 20plus tube capacity , stand for separating funnel ss for 500ml funnel , stand tripod ss 200mm height , stand tripod circular ss 200mm height , steam indicator tape 0po

CTN :40403654

10 Jun, 2025 NA

Pune - Maharashtra

Tender For supply of mechanical valve aortic comma supra annular 17mm , mechanical valve aortic comma supra annular 19mm , mechanical valve aortic comma supra annular 21mm , mechanical valve aortic comma supra annular 23mm , mechanical valve aortic comma supra annular 25mm

Loading, Please wait...

Mechanical Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government