Latest mechatronics trainer Tenders | Government mechatronics trainer Tenders

State Government

CTN :41192299

05 Aug, 2025 4.81 Lacs

Khandwa - Madhya Pradesh

Tender For procurement of boll and kirch make differential pressure indicator cum switch for hp/lp turbine inlet valve at 2x600mw, sstpp, mppgcl, khandwa

State Government

CTN :41202738

04 Aug, 2025 NA

Koradi - Maharashtra

Tender For procurement of spares for primary sampling rack installed at 3 x 660mw units at ktps, koradi. through open tender. - high pressure isolation globe valve, high pressure isolation globe valve ,, sample cooler, coil in shell type:- double helical coil, pressure ss-316 regulator, ¾" coolant ss304 flow indicator spare for water quality, one to one fittment required to existing spare., relief valve body: ss-316, ss tube 3/8'' thickness 20 20swg. material -a213tp 213.

State Government

CTN :41234048

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of c/f pump (clear water) and its accessories at saraswatipur rwss - supplying ,installation and commissioning of multi stage/ horizontal split casing/multi stage centrifugal pump (make: kirloskar / wpil/jyoti/ mather & platt) rating-15 kw/20hp as per is:5120, capable for discharging 72 m3/hr against a head of 40 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (ie3) tefc squirrel cage induction motor confirming to is:325 and is:12615, having 15% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar /abb/cgl/bhel] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of e/i. discharging -72 m3/hr and head - 40m (1w + 1s) 20 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 20 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards making suitable suction line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion, including making hole for suction, cutting, welding etc all complete., cost towards making suitable delivery line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion including joining the new suction line to the existing header by means of cutting, welding etc all complete., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors), providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house., construction of chamber for 100mm sluices valve.

State Government

CTN :41234051

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of vt pump (raw water) and its accessories at saraswatipur rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-22kw/30hp approx as per is 1710, capable of discharging 94.56 m3/hr against a head of 50 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -94.56 m3/hr and head - 50m (1w + 1s) 30 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 30 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job for raw water vt pump set., cost towards jointing newly installed pump motor set to the existing header at raw water p/p., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 160 a copper busbar- 4 pole, 1 no. 160 a mccb as incoming feeder and 2 nos. 100a mccb as outgoing feeders for motors, 1 no. 100 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i ., supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismantling of old pump set and foundation and making arrangements for removal of debries from the pump house.

State Government

CTN :41234052

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of items of vt pump (raw water) and accessories at gumuria rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-7.5 hp approx as per is 1710, capable of discharging 24.5 m3/hr against a head of 30 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, foot valve, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -24.5 m3/hr and head - 30m (1w + 1s) 7.5 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 7.5 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards jointing newly installed pump motor set to the existing header., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63 a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, phase indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 6 sqmm xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house.

State Government

CTN :41234055

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of items of c/f pump(clear water) and its accessories at gumuria rwss - supplying ,installation and commissioning of multi stage/ horizontal split casing/multi stage centrifugal pump (make: kirloskar / wpil/jyoti/ mather & platt) rating-40hp as per is:5120, capable for discharging 30 m3/hr against a head of 101 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (ie3) tefc squirrel cage induction motor confirming to is:325 and is:12615, having 15% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar /abb/cgl/bhel] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, ms delivery & suction pipe, common header, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of e/i. discharging -30 m3/hr and head - 101 m (1w + 1s) 40 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 40 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards making suitable suction line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion, including making hole for suction, cutting, welding etc all complete., cost towards making suitable delivery line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion including joining the new suction line to the existing header by means of cutting, welding etc all complete., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 200 a copper busbar- 4 pole, 1 no. 160 a mccb as incoming feeder and 2 nos. 100 a mccb as outgoing feeders for motors, 1 no. 100 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i ., supplying and erecting 25 sqmm xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house.

Co-operative

CTN :41198611

04 Aug, 2025 NA

Azamgarh - Uttar Pradesh

Tender For supply of instrument spare part all type goods - supply of instrument spare parts & all type of goods, temperature scanner model-85xx mix, input-rtd, pt-100 (3w), range: -199.9 to 200.0 degree, channel: 08, power: 85 - 265v ac, option: rs - 485 modbus protection, make- massibus, popat valve 1" f/e, 5/2 way double solenoid valve 1/4", 220v ac & double coil (5700-6-2g) make- rotex, 5/2 way single solenoid valve 1/4", 220v ac & single coil (3012-6-2g) make- rotex, 3/2 way single solenoid valve 1/4", 230v ac & single coil (3013-6-2g) make- rotex, proximity switch (pnp-sw4051) 3 wire, 400 ma x 3 mtr. long make-jay shree, vibrator card (0 - 100) make- vaidehi international industries, air filter regulator model : al3000 make-akari, pneumatic limit switch model: dp045061 make- janatic, pressure switch model: psm-520-100 (0 - 100 psi) make- indfos, pneumatic limit switch model: psm-520-100 (0 - 100 psi) make- janatic, spear lug centre mounting for cylinder, spear fork mounting for cylinder, spare seal kit for pneumatic actuator (pd-280/4), spare seal kit for pneumatic actuator (pd-500), separator controller mm3010 (make-selec), pneumatic relay for electromagnetic positioner model:8013 (make-mil), pneumatic relay for electromagnetic positioner (make-ytc ) model: yt-1000 ldr 13250, pneumatic relay for electromagnetic positioner (make-forbes marshall ) model: 820-pp, i/p converter current signal (4 - 20 ma), pressure signal (3 - 15 psi) make - abb, signal isolator (massibus make) input: 90-265v ac, dual o/p channel, temperature indicator pic 101 supply 230v ac (make- selec), thermo well ss316, length-120mm heavy duty, thermo well ss316, length-90mm heavy duty, cylinder exhaust valve model no. 3340d make-schrader duncan, solenoid valve model no.:vaj213-2g-24v dc, make- rotex, push male connector size - 8mm x 1/4" make janatic, push male connector size - 8mm x 1/2" make janatic, push joint connector size - 8mm x 1/4" make janatic, electromagnetic flow meter (digital water meter) size 4" body & flange-ms, type-rubber lining, flow rate- 4 digital led, total flow-9 digital led, flow unit-m /hr, line pressure-max. 25 kg/cm2, i/p supply : 230v ac, o/p: 4 - 20 ma, electromagnetic flow meter (digital water meter) size 3" body & flange-ms, type-rubber lining, flow rate- 4 digital led, total flow-9 digital led, flow unit-m /hr, line pressure-max. 25 kg/cm2, i/p supply : 230v ac, o/p: 4 - 20 ma, electromagnetic flow meter (digital water meter) size 1-1/2" body & flange-ms, type-rubber lining, flow rate- 4 digital led, total flow-9 digital led, flow unit-m /hr, line pressure-max. 25 kg/cm2, i/p supply : 230v ac, o/p: 4 - 20 ma, vfd spares abb make model : acs 800+s71200, please mention the make and enclose the price list duly verified and quote discount on price list, vfd spares abb make model : acs 850-04-650-5-u400 please mention the make and enclose the price list duly verified and quote discount on price list, vfd spares abb make model : acs 850-04-580a-5 please mention the make and enclose the price list duly verified and quote discount on price list, vfd spares abb make model : acs 560-145a-04 please mention the make and enclose the price list duly verified and quote discount on price list, vfd spares abb make model : acs 150 please mention the make and enclose the price list duly verified and quote discount on price list, vfd spares abb make model: acs 580 please mention the make and enclose the price list duly verified and quote discount on price list, spares of siemens make cinamics drive model:g130 please mention the make and enclose the price list duly verified and quote discount on price list, spares of siemens make cinamics drive model:g150 please mention the make and enclose the price list duly verified and quote discount on price list, siemens dcs supply of pc & commissioning of system, desktop pc compactable with existing siemens dcs for boiling house operation with siemens software packages, dcs scada

CTN :41194282

14 Aug, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of filtering cartridge gng-215 , pressure indicator , 0 ring , coaloscer cartridge , seperator cartridge permanent type , monitor cartidge , elements type fg220 , semi-permanent separator cartidge , separator cartridge , separator cartridge , pressure indicator 0-16 bar , automatic pistol refuelling nozzle-2 bspp , coalescer cartridge cm22-5 , hose hd-50 2 diam grade b l-30m , refuelling hose -l-4m-b type-2 bspp

CTN :41242726

07 Aug, 2025 49.5 Thousand

Faridkot - Punjab

Tender For supply of ignition switch , indicator , oil pressure guage , air pressure guage , armature , field coil assy , solenoid switch , pipe assy , filter pipe , master switch , union pipe

CTN :41232255

07 Aug, 2025 NA

Baramulla - Jammu And Kashmir

Tender For tender for supply of filter top assy plug , convoy lamp assy , clutch facing kit consisting two itesm , inlet cac pipe cabin pressure pipe , rep kit minor , assy fuse box , sensor map connector , air horn assy presure pipe , assy turn indicator , terminal ()

Mechatronics Trainer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

State Government

Co-operative