Latest medical gas outlet Tenders | Government medical gas outlet Tenders

State Government

CTN :45582556

22 Jun, 2026 1.50 Lacs

Churu - Rajasthan

Tender For supply of cid joint for hdpe pipe 110 mm and 180 mm com. set

CTN :45540612

03 Jul, 2026 20.00 Lacs

Rewa - Madhya Pradesh

Tender For inviting rates for supply of jalpraday and pipe line samagri for financial year 2026-27 in nagar parishad semariya dist rewa -clamp with nut & bolt (isi marked: sizes 2, 3, 4, 6); m.s. clamp with nut & bolt (isi marked: sizes 3, 4); hdpe pipe (isi marked: sizes 1, 2, 3, 4, 5, 6); bleaching powder (grasim, isi marked); cable (isi marked: 2.5 mm 3-core copper, 4 mm); connection cable (isi marked: 4-pole 4 mm armoured); connection clamp (isi marked: sizes 2, 3, 4, 5, 6); pump repair (1 hp to 12.5 hp, as per individual specifications). includes impeller and repair materials; items include: 2" isi-marked pvc gate valve, 2.5" isi-marked pvc gate valve, 3" isi-marked pvc gate valve, 3" isi-marked hdpe elbow, 4" isi-marked hdpe elbow, 6" isi-marked hdpe elbow, 180mm isi-marked pvc plain casing pipe, 12" isi-marked pipe wrench, 24" isi-marked pipe wrench, 2.25" isi-marked pipe lifter, 7.5 hp isi-marked panel board (single phase/ltl), 10.0 hp isi-marked panel board (single phase/ltl), 2 hp isi-marked panel board (single phase/ltl), 110mm isi-marked rubber ring, 160mm isi-marked rubber ring, and 180mm rubber ring. isi marked c.i. flange (2" & 3"); isi marked c.i. sluice valve (110mm, 150mm, 180mm); isi marked c.i. d-joint (100mm, 150mm, 180mm); isi marked c.i. non-return valve (100mm); isi marked c.i. tail piece (100mm, 150mm, 180mm); isi marked hdpe tee (100mm, 150mm, 180mm); nuts & bolts; isi marked submersible pump (7.5 hp, 20-stage); isi marked submersible pump (2 hp, 20-stage).

CTN :45558506

30 Jun, 2026 20.00 Lacs

Rewa - Madhya Pradesh

Tender For invitation for annual rate tenders for the procurement of water supply materials - ss clamp with nuts & bolts (2-inch)ac pipe (3-inch)ac pipe (4-inch)hdpe nipple (1-inch) isihdpe nipple (2-inch) isihdpe nipple (3-inch) isihdpe pipe (1-inch & 3/4-inch) kisan/taxmowasher (2-inch & 3-inch)brass elbow (1/2-inch)brass elbow (1-inch)brass elbow (3/4-inch)raw rubbercable (2.5 mm & 6 mm) national/kisan/taxmoconnection cable (3 mm) armoured-isiconnection cable (4 mm) armoured-isiconnection cable (6 mm) armoured-isiconnection clamp (2-inch)connection clamp (3-inch)connection clamp (4-inch)connection clamp (5-inch)connection clamp (6-inch)connection clamp (8-inch)pvc socket (1-inch)pvc socket (1/2-inch)pvc socket (3/4-inch)pvc valve (1-inch)pvc valve (1/2-inch)pvc valve (3/4-inch)pvc tee (1-inch)pvc tee (2-inch)pvc teflon tapepvc gate valve (1-inch) kisan/taxmopvc gate valve 1/2 inch kisan/taxmopvc gate valve 2 inch kisan/taxmopvc gate valve 3/4 inch kisan/taxmopvc elbow 1 inch kisan/taxmopvc elbow 1/2 inch kisan/taxmopvc elbow 2 inch kisan/taxmopvc elbow 3/4 inch kisan/taxmopvc casing pipe (plain) 100 mm kasta/kisanpvc pipe 1 inch kisan/taxmopvc pipe 1/2 inch kisan/taxmopvc pipe 3/4 inch kisan/taxmopanel board 15 hp three-phase bentex (automatic)panel board 20 hp three-phasepanel board 25 hp three-phasesaddle clamp 1 inch isisaddle clamp 1 1/4 inch isisaddle clamp 2 inch isisaddle clamp 3 inch isirubber ring 80 mm isi (3 inch)rubber ring 100 mm isi (4 inch)rubber ring 125 mm isi (5 inch)rubber ring 150 mm isi (6 inch)rubber sheet packingsubmersible 1 hp 8, 10, 12, 16-stage single-phase jasco/texmo/crisubmersible 20 hp 12-stage three-phase jasco/texmo/crisubmersible 15 hp 10-stage three-phase jasco/texmo/cric.i. flange 2-inchc.i. flange 3-inchc.i. flange 4-inchc.i. reducer tee 100 x 100 mm - isic.i. reducer tee 80 x 100 mm - isic.i. reducer tee 100 x 100 x 150 mm - isic.i. reducer tee 80 x 80 x 100 mm - isic.i. tee 100 x 100 x 100 mm - isic.i. tee 100 x 100 x 80 mm - isic.i. tee 150 x 150 x 150 mm - isic.i. tee 80 x 80 x 100 mm - isic.i. tee 80 x 80 x 80 mm - isic.i. air valve 80 mm - isic.i. air valve 100 mm - isic.i. air valve 150 mm - isic.i. bend 100 mm 45-degree - isic.i. bend 100 mm 90-degree - isic.i. bend 150 mm 45-degree - isic.i. bend 150 mm 90-degree bend - isici bend 80 mm 45-degree - isici bend 80 mm 90-degree - isici sluice valve 100 mm - isici sluice valve 150 mm - isici sluice valve 200 mm - isicid joint 100 mm - isicid joint 200 mm - isici tail piece 100 mm - isisolventwhite lead (safeda)pvc suction pipe 3-inch (dutron/kisan/taxmo)pvc suction pipe 4-inch (dutron/kisan/taxmo)centrifugal pump 20 hp three-phase (jasco/crompton/taxmo)centrifugal pump 25 hp three-phase (jasco/crompton/taxmo)water tank 500 litres (sintex/kisan/taxmo)chain pulley (block) 2 tonfoot valve 3-inch and 4-inchgi nipple 1-inchgi nipple 1/2-inchgi nipple 3/4-inchgi nipple 9-inchgi reducer tee 50x50x80 mm - isigi reducer tee 100x100x80 mm - isigi reducer tee 15 x 15 x 20 mm - isigi reducer tee 20 x 20 x 25 mm - isigi elbow 80 x 100 mm - isigi elbow 100 mm - isigi elbow 20 mm - isigi flange 2-inchgi flange 3-inchgi flange 4-inchgi bend 100 mm - isigi bend 15 mm - isigi bend 20 mm - isigi bend 25 mm - isinut-bolt 1/2-inch (4-sut) x 3-inch lengthbrass tap 1/2-inchsteel tap 1/2-inchiron tap 1/2-inchbrass tap 15 mm - isici tail piece 2-inch, 3-inch, and 4-inchsteel grip tapegate valve 3-inchgate valve 4-inchbrass gate valve 1-inch - isibrass gate valve 1/2-inch - isibrass gate valve 3/4-inch - isibrass gate valve 2-inch - isibrass star-delta starter kit/linkstarter magnet coil 20 hpci end cap 2-inchci end cap 3-inchci end cap 4-inchpvc end cap 1-inchpvc end cap 1/2-inchpvc end cap 3/4 inchci d-joint 3 inchci d-joint 4 inchci d-joint 6 inchci d-joint 8 inchhdpe d-joint 2.5 inchhdpe d-joint 3 inchhdpe d-joint 4 inchhdpe d-joint 6 inchhdpe d-joint 8 inchci sluice valve 8"submersible pump 5 hp (8/10 stage, single/three phase) - jasco/texmo/crisub

CTN :45558459

29 Jun, 2026 NA

Jhabua - Madhya Pradesh

Tender For providing and supply of water supply relevant items for nagar parishad ranapur - gi pipe (1¼ inch, class b); gi rod with socket; gi socket (1¼ inch, heavy); heavy cylinder assembly; no. 16 nut-bolt; chain; rod socket; heavy water tank; cylinder rubber ring; cylinder rubber washer (with collar); cylinder rubber washer (without collar); plunger pin rubber washer; lower valve rubber washer; handpump nut-bolt (no. 18); nut-bolt (8mm x 9 inch); ci design 15-maker (6 inch); ci design 10-maker (6 inch); ci design (3 inch); ci design (4 inch); rubber ring (6 inch); rubber ring (4 inch); rubber ring (3 inch); rubber packing (6 inch); rubber packing (4 inch); rubber packing (3 inch); nut-bolt (10mm x 3 inch); nut-bolt (10mm x 4 inch); nut-bolt (8mm x 3 inch); nut-bolt (8mm x 4 inch); nut-bolt (8mm x 6 inch); ci tailpiece (3 inch); ci tailpiece (4 inch); ci tailpiece (6 inch); pvc pipe (6 inch, 6 kg); pvc pipe (6 inch, 10 kg); pvc pipe (4 inch, 6 kg); rubber ring (8 inch); ci tailpiece (8 inch); pvc pipe (3 inch, 10 kg); pvc pipe (3 inch, 6 kg); pvc coupler (6 inch, 6 kg); pvc coupler (6 inch, 10 kg); pvc coupler (3 inch). pvc bend (6-inch, 10 kg/cm²), pvc bend (6-inch, 6 kg/cm²), pvc bend (4-inch, 10 kg/cm²), pvc bend (3-inch, 10 kg/cm²), pvc bend (90mm), ci tee (160x160x160mm), ci tee (160x90x160mm), ci tee (160x110x160mm), ci tee (90x90x90mm), pvc bend (160mm), pvc tee (160mm), pvc tee (6x6x6 inch, 10 kg/cm²), pvc tee (6x3x6 inch, 10 kg/cm²), pvc tee (3x3x3 inch, 10 kg/cm²), rubber sheet, pvc solvent cement, suction pipe (3-inch, for water pump), suction pipe (2.5-inch), pvc foot valve (6-inch, for water pump), pvc foot valve (3-inch, for water pump), delivery pipe (2.5-inch), delivery pipe (3-inch), suction pipe (4-inch, for water pump), gi pipe (1/2-inch), alum (high quality), bleaching powder (high quality), gi flange (3-inch), gi flange (4-inch), gi flange (6-inch), gland rope (6mm, 8mm, 10mm, 12mm), aluminium wire (6mm, 8mm, 10mm, 12mm, 16mm), water tanker for drinking water (5000 liters). pvc coupler (6 kg, 6-inch); kirloskar ci foot valve (65mm, 80mm, 100mm, 150mm); copper wire (7/16); 3-core copper cable (6mm, 8mm); high-quality cutout (63a, 100a, 200a); main switch (100a, 200a); bearings (6307, 6308, 6309, 6310); pvc reducer (6x3, 6x4, 4x3); starter panel (2 hp, 5 hp); star-delta starter (10 hp, 15 hp, 30 hp); submersible pump (2 hp); water motor (2 hp, 5 hp); handpump bearing; handpump axle; ci double air valve (80x80, 80x100); pvc end cap (6 kg: 160mm, 90mm, 110mm). pvc 10 kg/cm² end cap 110 mm, pvc 10 kg/cm² end cap 160 mm, pvc 10 kg/cm² 8-inch pvc coupler, 6 kg/cm² 8-inch pvc coupler, 10 kg/cm² 10 hp monoblock motor (kirloskar), 90 mm hdpe ci joint, 110 mm hdpe ci joint, 140 mm hdpe ci joint, 160 mm hdpe ci joint, 180 mm hdpe ci joint, 200 mm hdpe ci joint, 225 mm hdpe ci joint, 250 mm hdpe ci joint, 280 mm hdpe ci joint, 300 mm hdpe ci joint, 90 mm hdpe rubber ring, 110 mm hdpe rubber ring, 140 mm hdpe rubber ring, 160 mm hdpe rubber ring, 180 mm hdpe rubber ring, 200 mm hdpe rubber ring, 225 mm hdpe rubber ring, 250 mm hdpe rubber ring, 280 mm hdpe rubber ring, 300 mm hdpe rubber ring, 90 mm hdpe pipe 6 kg/cm², 110 mm hdpe pipe 6 kg/cm², 140 mm hdpe pipe 6 kg/cm², 160 mm hdpe pipe 6 kg/cm², 180 mm hdpe pipe 6 kg/cm², 200 mm hdpe pipe 6 kg/cm², 225 mm hdpe pipe 6 kg/cm², 250 mm hdpe pipe 6 kg/cm². 280mm hdpe pipe (6 kg/cm²), 300mm hdpe pipe (6 kg/cm²), d-joint 200mm ci (class 10), d-joint 200mm ci (class 15), ms plate 16mm (4x4 ft), ms plate 18mm (4x4 ft), 30 hp monoblock pump (80m head, 2880 rpm), 25 hp submersible pump, 20 hp submersible pump, handpump vice/clamp, taparia handpump pipe wrench (24-inch), taparia handpump pipe wrench (14-inch), taparia open-end spanner set, taparia ring spanner set, taparia box spanner set, ci tee 200x200x200mm, ci tee 200x150x200mm, pvc tee 6x4x6 inch (10 kg/cm²), ci d-joint 6-inch (4-inch collar ring), ci d-joint 8-inch (4-inch collar ring), ci d-joint 4-inch (4-inch collar ring), ci d

CTN :45543102

06 Jul, 2026 18.50 Lacs

Gangtok - Sikkim

Tender For supply of puf insulated hdpe drinking water tanks , pre- insulated ppr pipe , pre-insulated ppr pipe fitting , joint kit , self-regulating heat tape , copper cable , distribution panel , earthing , lightning arrestor , itc

CTN :45379413

23 Jun, 2026 NA

Birbhum - West Bengal

Tender For corrigendum : procurement of hdpe pipe and other material for bktpp under capex 2025 2026 - pipe,ms,150nb,heavy grade,is1239,min l6m ( 1. bevelled end. 2. make: tata/sail/jindal. 3. each pipe length 6 mtr. (+ or -7.5% tolerance may be allowed in each pipe length). 4. is: 1239 ( part-1),heavy grade ), counter flange for 150nb ms pipe for ahp bktpp moc: ms; od-280 mm,id-170 mm,pcd-240 mm,holes-08 nos,hole dia.-20 mm ; 01 set=02 nos, hdpe flange, dn180mm pn8 pe100 id150mm for hpde pipe, hdpe pipe, dn180mm pn8 pe100 id150mm for hdpe pipe ( each pipe length:9m ), butt fusion joint, dn180mm pn8, pe100 for hdpe pipe , id150mm hdpe pipe, hdpe reducing tee, id150x id150xid75 for hdpe pipe, hdpe elbow, dn180mm pn8 pe100 id150mm for hdpe pipe, pipe 75mm is-4984 hdpe pipe pe-100 pn 6 for hdpe pipe ( each pipe length:9m ), gate valve, 75mm hdpe for hdpe pipe

CTN :45533036

20 Jun, 2026 7.99 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- development of ezhikkara grama panchayath ground in paravur lac, ernakulam district- supply and installation of open gym equipment - retender - inauguration stone and interlock laying for open gym area, od34726/2026-2027 providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre polished, machine cut for inauguration granite stone of required size, approved shade, colour and texture laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) joint treated with white cement, mixed with matching pigment, epoxy touchups including rubbing, curing etc. complete at all levels. area of slab over 0.50 sqm, 16.21 engraving letters in hard stone, od419846/2025-2026 providing and laying of interlock concrete block pavements having thickness 60mm (m35) as per drawings and technical specification clause 1504 confirming to is 15658 and laid in required colour and pattern over and including 50mm thick compacted bed of 6 mm metal including edge concreting for 300mm width and 150mm depth with cc m35( @ 0.045 m3/m), supply and installation of open gym equipment, od27550/2026-2027 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od30940/2026-2027 surfboard - dimensions: (l x w x h) 1090 x 890 x 1390 mm. main frame made from two pipes of ø 114 mm od b class gi pipe. foundation plate m.s. round plate of ø 250 mm & 8 mm thick. connecting pipe - ø 88 mm od b class gi pipe is used to connect both main frame pipes at top end and ø 42 mm pipe is used to connect at bottom end. handle - ø 42 mm and ø 33 mm od b class gi pipe. support pipe ø 60 mm must be used to support leg movement frame. leg movement frame ø 42mm od b class gi pipe. footrest - cast iron 325 x 270 x 8 mm thick and m.s. plate of 250 x 200 x 2 mm thick use for to support it. bracket - 8mm thick laser profile is used to support leg movement frame. top closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality

CTN :45482035

18 Jun, 2026 19.50 Lacs

Rohtak - Haryana

Tender For corrigendum : supply of various parts of horizontal pumps and tools... - ms flat 50*5 mm, ms angle 50*50*5mm, 50*50*6mm (tata,sail,jindal make), ms channel ismc 100 (tata,sail,jindal make), ss round bar 30 mm(line shaft), ss round bar 40 mm(line shaft), plastic rope 3/4", nut & bolt 5/8"x 3", m.s nut & bolt 5/8" x 21/2", ms nut bolt 5/16x 1.5", ms nut bolt 1/2" x 2", ms nut bolt 1/2" x 11/2", ms nut & bolt 1/2" x 21/2", ms nut & bolt 1/2" x 3", ss nut bolt 3/4x3, stud with nut 11/16 x 5/8 x 3", stud with nut 5/8x 5/8 x 3", gi wire 8 swg, gland packing 3/8", gland packing 1/2", lift belt 5ton cap x 4 mtr, lift belt 3ton cap x 3 mtr, lift belt 3ton cap x 2 mtr, gland plate for n.w-12d, gm gland plate for 5 c/s v.t pump as per sample, g.m gland plate for 10 c/s v.t pump as per sample, pipe wrench 12"(300mm size) (taparia/pye/miranda/spartan/stanley make ), hammer 1lbs, screw driver 10" 250mm (taparia/pye/miranda/spartan/stanley make ), screw driver 12" (taparia/pye/miranda/spartan/stanley make ), screw driver 8" (taparia/pye/miranda/spartan/stanley make ), ring spanner 24x26mm (taparia/pye/miranda/spartan/stanley make ), insulated plier 8" (200mm) (taparia/pye/miranda/spartan/stanley make ), long nose plier 8" (taparia/pye/miranda/spartan/stanley make ), d-e spanner 21x23 (taparia/pye/miranda/spartan/stanley make ), d-e spanner 24x26mm (taparia/pye/miranda/spartan/stanley make ), d-e spanner 14x15mm (taparia/pye/miranda/spartan/stanley make ), d-e spanner 12x13mm (taparia/pye/miranda/spartan/stanley make ), ring spanner 14x15 (taparia/pye/miranda/spartan/stanley make ), ring spanner 21x23 (taparia/pye/miranda/spartan/stanley make ), ring spanner-12x13 (taparia/pye/miranda/spartan/stanley make ), line tester (7"- 8") (taparia/pye/miranda/spartan/stanley make ), freemans 5mx19mm measuring tape with belt clip and lock, hexa blade one side/double side mix, welding holder heavy duty, hdpe tirplaine 15 x12 heavy duty, coupling tyre tc 13, delivery casing for nw-12d inner for kirlosker pump, delivery casing for nw-12d outer for kirlosker pump, impeller 6x6 nw-12d kirloskar pump, bearing pedestal for nw-12d kirlosker make, shaft for nw-12 d pump kirlosker make, lantern ring for nw-12 d pump kirlosker make, water deflector for nw-12 d pump kirlosker make, abrasive cutting wheel 14 (grindwell norton, 3m, bosch make), motor shaft with check nut 5 c/s v.t pump as per sample, impeller nut mf for 5 cs horizontal pump as per sample, fuel pump gear tv-2 kirlosker make, servo super oil mg 20w-40, log book of vehicle (25 page) as per sample, mas register (50 page) as per sample, log book of machinery (25 page) as per sample, cyl liner with joint ring 1800801 kirlosker make, valve kit tv-2 kirlosker make, liner piston chota jawan kirlosker make, head gasket 87.5 mm 1180090300 kirlosker make, air cleaner kirlosker make, packing kit tv-2 kirlosker make, pipe t type kirlosker make, fuel tank complete kirlosker make, fuel filter assy kirlosker make, nozzale chota jawan kirlosker make, air cleaner chota jawan kirlosker make, packing kit chota jawan kirlosker make, valve kit chota jawan kirlosker make, head gasket chota jawan kirlosker make, diesel filter chota jawan kirlosker make, banjo bolt tv2 kirlosker make, nozzle 9430034216 kirlosker make, piston assy.180061000-1800615000 kirlosker make, cr bolt tv2 kirlosker make

CTN :45201060

16 Jun, 2026 40.00 Lacs

Chhatarpur - Madhya Pradesh

Tender For corrigendum : purchase of water supply materials 2026-27 - gi b , 50 mm , pvc 6 kg isi , 25 mm 6 kg isi, 40 mm 6 kg isi, 75 mm 6 kg isi, 90 mm 6 kg isi, 110 mm 6 kg isi, 140 mm 6 kg isi, 160 mm 6 kg isi, 180 mm 6 kg isi, hdpe , 50 mm 10 kg isi, 90 mm 10 kg isi, 110 mm 10 kg isi, 140 mm 10 kg isi, 160 mm 10 kg isi, 200 mm 6 kg isi, 225 mm 6 kg isi, pvc , 15 mm (1/2 ), 20 mm (3/4 ), 25 mm (1 ), gi , 0 0 2 , 0 0 1 , 0 0 1 , 0 0 1 , 1", 1 ", ", 2", 3", 4", 2", 2.5", 2", 3", 4", 5", 6", 1", 3", 1", 1 ", ", hdpe , 2.5 inch, , , . , 80 mm, 100 mm, 150 mm, 200 mm, 250 mm, 300 mm, . . , 80 mm, 100 mm, 150 mm, 200 mm, 250 mm, 300 mm, . / , 80mm, 100mm, 150mm, 200mm, 250mm, 300mm, . . , 50mm, 80mm, 100mm, 150mm, 200mm, 250mm, 300mm, 20 hp, . . , 80 mm, 100 mm, 150 mm, 200 mm, 250 mm, 300 mm, , 80 mm, 100 mm, 150 mm, 200 mm, 250 mm, 300 mm, . , ", 3/4", 1"x4", 1 "x4", 3"x6", 4"x6", 5"x7", 6"x7", . , ", 3/4", 1", 1 ", 1 ", 2", 3", 4", . . , ", 3/4", 1", 1 ", 1 ", 2", 3", 4", . , ", 3/4", 1", 1 ", 1 ", 2", 3", 4", . b , ", 3/4", 1", 1 ", 1 ", 2", 3", 4", ci , 15 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 75 mm, 100 mm, ( ), ", 3/4", ( ), ", 3/4", ( ), ", 3/4", ( . . .), ", 3/4", . , 2", 3", 4", 6", . . 6 kg , 1.5", 2", 2.5", 3", 4", 6", . . . 6.kg , 1.5", 2", 2.5", 3", 4", 6", . . . 6 kg , 1.5", 2", 2.5", 3", 4", 6", . . . , 1.5", 2", 2.5", 3", 4", 6", 7", 0 0 0 10 kg , 6", 8", 10", ( ), ", 12 mm, 5/8", 6/8", , 1/4", 1/8", , , 1/2"x3 ", 4", 5", 6", , 5/8x2", 2 ", 3", , 5", 6", 36 , , 36", 24", 18", 14", 12", 10 mm, ( . . . ) 8 mm, ( . . . ) 12 mm, ( . . . ) 15 mm, ( . . . ) 20 mm, 620 26 mm , c.i.d joint complete, 80 mm, 100 mm, 150 mm, 200 mm, 225 mm, 160 mm, 180 mm, 110 mm, 90 mm, 125 mm, 250 mm, 300 mm, 5 , 3 , , 6306 skf, 6307 skf, 6308 skf, 6309 skf, 6310 skf, 3309 skf, , 10 mm, . . . 6 x 3 , . . . 6 x 4 , . . . 8 x 4 , . . . 8 x 3 , . . . 3 x 4 , . . . 8 , . . . 6 , . . . 200 mm 10 kg isi, . . . 160 mm 10 kg isi, . . . 20 mm 10 kg isi, 160 mm, 200 mm, 25 mm, , . . ., , , 6x7 to 30x32 , 15 , , 6 7 30 32 , 4 , , 24 , , 1 , 1 , 1 , , , " 15mm pvc , 20 mm pvc , 25 mm pvc , 15 mm pvc , 20 mm pvc , 25 mm pvc , 32 mm pvc , 15 mm pvc , 20 mm pvc , 25 mm pvc , 32 mm pvc , 19 mm pvc , 15 mm pvc , 20 mm pvc , 25 mm pvc , di , 400 mm, 350 mm, 300 mm, 250 mm, 200 mm, di complete, 400 mm, 350 mm, 300 mm, 250 mm, 200 mm, ), 400 mm, 350 mm, 300 mm, 250 mm, 200 mm, di 6 , 400 mm, 350 mm, 300 mm, 250 mm, 200 mm, hdp 10 kg 6 m, 225 mm, 200 mm, 160 mm, 180 mm, 0 0 , 200 mm, hdpe 0 0 6" , 400 mm, 350 mm, 300 mm, 315 mm, 250 mm, 200 mm, 225 mm, 180 mm, 160 mm,

Central Government/Public Sector

CTN :45318754

22 Jun, 2026 21.75 Lacs

Gaya - Bihar

Tender For corrigendum : supply of plumbing spare parts - cpvc 20mm pipe , cpvc 20mm elbow , cpvc 20mm tee , cpvc 20mm socket , cpvc 20mm half bend , cpvc 20mm cross tee , cpvc 20mm pass over bend , cpvc 20x15 brass elbow , cpvc 20x15 brass tee , cpvc 20x15 fta , cpvc 20x15 mta , cpvc 20mm cross tee , cpvc bush reduce 25x20 , cpvc 25mm pipe , cpvc 25mm elbow , cpvc 25mm tee , cpvc 25mm soket , cpvc 25mm half bend , cpvc 25mm cross tee , cpvc 25mm pass over bend , cpvc 20mm concealed , cpvc 25mm concealed , cpvc solvent 200ml , sedal 20mm pvc , sedal 25mm pvc , cpvc concealed valve stop cock 20mm , black cement , soap disk holder , soap disk holder , brass pillar cock , brass long body , brass shawer , brass 2x1 bib cock , brass washing machine tape , brass angel cock , brass stop cock 15mm , brass stop cock 20mm , brass gate valve 15mm , brass gate valve 20mm , brass gate valve 25mm , brass gate valve 32mm , brass gate valve 40mm , brass gate valve 50mm , health faucet nikil crome , brass waste coupling , ss sink coupling , ss waste pipe crome , gyser connection pipe , basin fashnner , braket fashner , brass and steel chrome bottal trap , brass sink mixcer non telephonic chrome , brass and steel chrome finish swan neck tap sink , hex nipple bit nipple , 90mm screw plus gutty , extention nipple 4 inch , extention nipple 3.5 inch , extention nipple 3 inch , extension nipple 2.5 inch , extention nipple 2 inch , brass spindal long body , brass spindal angle cock , conshiled spindal long , conshiled spindal long , 110mm ss cut jali , 110mm ss gratting jali , ss sink 22x24 , ss sink jali coupling , brass ro valve , brass nrv 25mm , brass nrv 32mm , brass nrv 40 mm , brass nrv 50 mm , brass nrv 65 mm , brass nrv 90 mm , brass nrv 110mm , brass ball valle 25mm , brass ball valve 32mm , brass ball valve 40mm , brass ball valve 50mm , water storage tank 2000 litter , water storage tank 500 litter , taflon tap water tek , ptmt pvc west pipe , ptmt pvc connection pipe 24 inch , ptmt pvc connection pipe 36 inch , water cooler connecting pipe 36 inch , 3m flexible pvc waste drain pipe 32mm , 3m flexible pvc waste drain pipe 40mm , ptmt pvc long body , ptmt pvc angel cock , ptmt pvc shawer , ptmt pvc healthfucet , ptmt pvc swan nec basin tap , wash basin 18x14x5 , counter mounted wash basin , wall hanging commode with cover , tank cover 24 inch , tank cover 36 inch , 25mm garden pipe 30metre , wc bolt fashner breaket , silicon , standard epoxy adhesive 500g , kohler 1327958 sp sensor assembly , kohler 1353114 sp sensor assembly , kohler 1327962 sp battery pack assembly , kohler 1150400 sp battery box assembly , kohler 1327931 sp solenoid valve assembly , kohler 1284859 flush valve , kohler 1278582 fill valve 3l and 6l , kohler spindal angel cock , kohler spindal piller cock , kohler cistern flushing plate , kohler diverter nobe , kohler wall hanging commode fashnner , kohler diverter handle , kohler diverter plate , kohler cistern saifan set , kohler conshiled spindal for urinal , kohler urinal p trap pvc , kohler 1115768 sp assy solenoid , kohler 1191986 0 hinge assembly left ok , kohler 1191987 0 hinge assembly right ok , kohler 1141995 hardewre pack , kohler tap opnner key , sluice valve 4inch , sluicevalve 6inch , 110mm pvc pipe , 110mm pvc elbow , 110mm pvc tee , 110mm pvc soket , 110mm pvc half bend , 110mm pvc y tee , 110mm pvc nahani trap , 110mm pvc p trap , 200mm swr pvc sewer pipe , pvc solvent 237ml , 90mm pvc pipe , 65mm pvc ball valve , 50mm pvc ball valve , 40mm pvc ball valve , 32mm pvc ball valve , 110mm pvc d joint , 90mm pvc d joint , hdpe d joint 110mm , hdpe flange 110mm , hdpe d joint 90mm , hdpe flange 90mm , hdpe butter fly valve 110mm , hdpe butter fly valve 90mm , hdpe butter fly valve 75mm , hdpe butter fly valve 65mm , hdpe butter fly valve 50mm , hdpe pipe 110 mm , hdpe pipe 90 mm , hdpe pipe 65mm , hdpe pipe 50mm , hdpe pipe 40mm , hdpe pipe 32mm , hdpe pipe 25 mm

Medical Gas Outlet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector