Latest medical gas pipeline system Tenders | Government medical gas pipeline system Tenders

State Government

CTN :45636287

03 Jul, 2026 9.00 Lacs

Srinagar - Jammu And Kashmir

Tender For corrigendum : annual maintenance contract for medical gas pipeline system and allied works at skims mch bemina

CTN :45729683

07 Jul, 2026 4.19 Crore

Palghar - Maharashtra

Tender For construction of 200 bedded rural hospital with trauma care unit at manor taluka dist palghar (sitc of medical gas pipeline system).

Central Government/Public Sector

CTN :45163037

01 Jul, 2026 NA

Delhi - Delhi

Tender For bid to ras providing of customized amc/cmc for pre-owned products - medical gas pipeline system; --; comprehensive maintenance contract (cmc); not applicable; yes

CTN :45618368

01 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras supply of 12 core sm ofc armoured , 4 twisted pair copper cable , single io box with smb shutter facility , 2 port io box with smb shutter facility , cat 6 utp network connecting cable-1 , cat 6 utp network connecting cable -3 , rj 45 connector , sfp module 10 gigabit , sc-lc fibre patch cord single mode , 24 port liu fully load rack mount , hide pipe 32 mm , pvc pipe 1 inch , pvc pipe 2 inch , casing and capping 1 inch , utp patch jack panel 24 port , cable manger , 1.5 sq. mm 3 core cables , power accessories bends screws tags clamps flexible pipes royal plugs ext , digging of hard soil 3ft depth , laying of hide pipe , laying of ofc , laying of pvc cappingand casing , laying of utp , single mode ofc splicing , otdr testing , fixing of io box , fixing of jack panel

State Government

CTN :45706667

10 Jul, 2026 7.06 Lacs

Bhavnagar - Gujarat

Tender For installation of various instruments at lakhanka and hamirpara irrigation scheme - providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anticorrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in- charge. , providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. c) concrete grade 1:2:4 and msa-40mm(graded)

State Government

CTN :45678034

14 Jul, 2026 28.50 Lacs

Jummu - Jammu And Kashmir

Tender For providing, installation, testing and commissioning of electro-mechanical equipments at newly drilled t/well peerkho. - providing of 3 nos. submersible pump sets :- the job involves providing of 3 nos. submersible pump sets of specification 15000 gph x 80 m head of reputed make (one no. operational and two nos. standby) along with allied accessories to be installed in 10/12 inch dia. deep drilled new tube well peer kho. the job includes fabrication, providing and fitting of 2 no. clamps of span as per the required length to be fabricated and fitted with submersible pump sets with the help of heavy duty bolts and nuts (01 no. clamp to each pump set). the job also includes fabrication of 2 no. graded expander/ reducer for nrv of required size to be fabricated out of suitable thickness ms pipe threaded at one end and flanged at the other end. fitting of reducers/ expanders with 125 mm dia. column pipes at one end with flanged joint and with the discharge outlet of the submersible pumps at the other end.column pipes :- fabrication and providing of 125 mm dia. b class ms 20 nos. column pipes flanged on both ends. the length of each pipe shall be 3 mtrs. and shall be completely leak proof. the ms pipe shall be confirming to relevant isi specifications. the heavy duty flanges shall be furnished properly. one end of the flange shall be faced in such a way that a leak proof joint is made by providing and fitting a rubber sheet in between the two flanges and tightening it with nuts and bolts. each flange shall be provided with 6 no. equidistant holes of required dia. the job also includes welding of flat iron strips at each end for giving extra strength to the flanged joint and providing of 2 no. grooves on each flange on opposite sides for submersible cable to be accommodated though it. the welding of heavy duty flanges with the pipe should be carried out with superior quality pipe welding electrodes. then painting all the pipes with a coat of anti corrosive paint and two coats of super enamel paint. ms well cap, washout and riser pipe :- fabrication and fitting of ms well cap as per casing dia. of 8 mm thickness with one hole of approx 125 mm dia. in the centre and with holes/ cuts at an appropriate distance for passing submersible cable. providing and fitting of an arrangement for gi fitting near the discharge head outlet to provide water feeding to the gravel around the tube well casing. laying of delivery line for making of inter connections of top column pipe of new tube well by way of fabricating 900 ms bend out of 125 mm dia. ms pipe, welding of 2 no flanges one at each end. fabrication and fitting of 125 mm dia. ms pipe connection piece long as per site requirement with 90 degree bend with the help of nuts, bolts, washers, rubber sheet in between for leak proof joint. fitting of 1 no. 125 mm dia. heavy duty c.s. sluice valve through a connection piece as per site condition. fabrication, providing and fitting of 1 mm dia. heavy duty cast steel reflux valve. the sluice and reflux valve shall be confirming the isi standards and shall be of reputed make. fabrication and fitting of another 125 mm dia. connection piece flanged at both ends for working of washout by way of interconnecting delivery pipe through tee joint with the washout pipe.. fabrication and fitting of 1 no. blind flange at the end of washout. painting of exposed parts of the delivery line with two coats of anti rust primer and one coat of super enamel paint. the job also involves fabrication and fitting of one set of u-shaped clamps (for holding 125 mm dia. pipe) on the top column pipe for holding of column assembly on the casing and fabrication of 1 set of u- clamps to be used for extraction/ lowering of pump set along with column assembly. complete job includes cost of material, labour charges and carriage etc. and also making provision for wash out by providing and fitting of sluice valve of c.s of required capacity as per site conditions.lowering of submersible p

corporations/Associations/Others

CTN :45693487

17 Jul, 2026 NA

Murshidabad - West Bengal

Tender For up gradation, replacement, operation and comprehensive maintenance of medical gas pipeline systems at mrshidabad mch of west bengal for 3 years, part i.

corporations/Associations/Others

CTN :45693489

17 Jul, 2026 NA

Malda - West Bengal

Tender For up gradation, replacement, operation and comprehensive maintenance of medical gas pipeline systems at malda mch of west bengal for 3 years, part ii.

corporations/Associations/Others

CTN :45693486

17 Jul, 2026 NA

Kamarhati - West Bengal

Tender For up gradation, replacement, operation and comprehensive maintenance of medical gas pipeline systems at college of medicine and sagore dutta hospital of west bengal for 3 years, part iii

corporations/Associations/Others

CTN :45401899

30 Jun, 2026 NA

Sealdah - West Bengal

Tender For corrigendum : design, supply, installation, testing and commissioning of extension work of medical gas pipeline system at chest building in nrs medical college and hospital of west bengal - design, supply, installation, testing and commissioning of extension work of medical gas pipeline system (mgps) at chest building in nrs medical college and hospital of west bengal

Medical Gas Pipeline System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors