Latest mesh wire Tenders | Government mesh wire Tenders

CTN :42599563

09 Jan, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : schedule vii (surgical dressings) - schedule vii (surgical dressings), bandage open woven 10x350 cms. as per schedule f-ii of drugs & cosmestics act,1940., bandage open woven 7.5 x 550 cms. as per schedule f-ii of drugs & cosmetics act,1940, plastic disposable drapes ready to use sterile without adhesive size 150 cms x 140cms : 100 gauge., plastic disposable drapes ready to use sterile without adhesive size 100 cms x 80cms : 100 gauge., bandages of p.o.p. ready to use. 15 cms x 2.7 meters., bandages for p.o.p. with starch as per schedule f(ii) of the drugs & cosmetics act,1940 10 cms x 4 metres, bandages for p.o.p. with starch as per schedule f(ii) of the drugs & cosmetics act,1940 15 cms x 4 metres, antimicrobial silver dressing. sustained release of silver for minimum 72 hours. effective against mrsa & vre size 10 x 10 cm/ 10 x 12 cm / 12 x 12 cm, antimicrobial silver dressing. sustained release of silver for minimum 72 hours . effective against mrsa & vre size 40 x 40 cm., tulle gras paraffin gauze dressing medicated. with chlorhexidine acetate 0.5% does not fray and leave cotton threads within the wound.soothin and protective of wound broad spectrum antiseptic effective against all gram positive and some gram negative bacteria.not inactivated by body fluids sterilie packaging.size 15 cm x 1 m, collagen sheets 10 cm x 10 cm +-1 cms, collagen sheets 15 cm x 25 cm +-2 cms, protective disk with chg is a hydrophilic polyurethane absorptive foam with 52.5 mg chlorhexidine gluconate (chg). 3/4" disk (1.9 cm) 1.5 mm center hole with radial slit, 2% chlorhexidine iv securement transparent dressing size : 10 cm x 12 cm gel pad size : 3 cm x 4 cm, tafetta silk tape size : 2 inches, tafetta silk tape size : 3 inches, alcohol free disinfection wipes containing quaternary ammonium compounds,for rapid disinfection of medical devices and other surfaces in medical areas 20x22cm. of pack of 100 wipes., adhesion barrier matrix 4 inch* 5 inch (10.0cm x 12.5cm), sterile porous collagen sheet sterile fish origin porous collagen dressing with nylon mesh backing, collagen layer is lyophilised, type i intact collagen of fish origin, collagen should be resorbable, size 8 in x 12 inch, sterile dry collagen sheets (fish origin ) 15x20cm, haemostatic matrix, size 8 ml, material: porcine gelatin, absorption time: 4-6 weeks, shelf life: 2 yearspack size: 6 pieces, storage requirementsstored dry at controlled room temperature 36-77 deg f (2-25 deg c)., sterile dry collagen sheets (fish origin ) 10x10cm, absorbent lint material 100% cotton, feature eco-friendlyusage: home, hospital, pressure garments (cotton) jacket without sleeves ( xl) 105-115 cm, pressure garments (cotton) jacket without sleeves ( large) 95-105cm, pressure garments (cotton) jacket without sleeves ( medium ) 85x 95 cm, pressure garments (cotton) jacket without sleeves ( small ) 75x 85 cm

CTN :43280910

05 Jan, 2026 25.28 Lacs

Kamrup - Assam

Tender For supply of materials for the schemes pertaining to kamrup rural w.r. division under pdna-2022. package 2 - construction and supply of wire -netting box of size 1.50 m 1.50 m 0.45 m made with mechanically woven, double twisted, hexagonal shaped wire mesh with wire made of low carbon, high ductile ms wire with heavy class of galvanization with an additional layer of pvc coating with mesh type of 10 12 as per en 10223 & astm a975, mesh wire of 2.70 mm (i.d) /3.70 mm (od) tensile strength of 450-500/mm2, edge wire selvedge around it at least 2.5 times, lacing wire (zinc pvc coated) of 2.20 mm (i.d)/3.20 mm (od), vc coating thickness of 0.50 mm nominal, 0.38 mm minimum, mesh opening size 150 mm 150 mm and with average weight per unit being 12 kg with additional 3% of the weight of box for lacing wire supplied separately, supporting the facing of the box with zinc coated steel wire of required length as directed, complying with astm and european norms.

CTN :43265022

03 Jan, 2026 NA

Gandhinagar - Gujarat

Tender For e-tender for supplying stationery items - folder - button (plastic ),type/size-a 4 size,brand/make-solo, folder - l shape,type/size-a 4 size,brand/make-solo, folder - l shape,type/size-a 3 size,brand/make-solo, binder clip (box of 12 pcs),type/size-19 mm,brand/make-oddy / astar, binder clip (box of 12 pcs),type/size-25 mm,brand/make-oddy / astar, binder clip (box of 12 pcs),type/size-32 mm,brand/make-oddy / astar, binder clip (box of 12 pcs),type/size-51 mm,brand/make-oddy / astar, sticky note yellow,type/size-3" x 5",brand/make-oddy / 3m, colour flag,type/size-3" x 3",brand/make-oddy / post it, highlighter marker pen fluorescent ,type/size-fluorescent,brand/make-faber castell, fevistik glue stick 25g,type/size-25 g,brand/make-pidilite, stainless steel ruler - 30 cm length,type/size-steel ,30 cms,brand/make-elora, cello tape ,type/size-1 inch(transparent),brand/make-wonder, cello tape ,type/size-2 inch(transparent),brand/make-wonder, cello tape ,type/size-1 inch(brown),brand/make-wonder, cello tape ,type/size-1 inch(btown),brand/make-wonder, extra dark pencil - ,type/size-pack of 10 pencils (pkt),brand/make-aspara, non dust eraser,type/size-pack of 20 eraser (pkt),brand/make-aspara, push pins (coloured),type/size-pack of 50 pcs (pkt),brand/make-bee fly / deli, spiral diaries - classmate - ,type/size-40 page,brand/make-classmate, spiral diaries - classmate - ,type/size-80 page,brand/make-classmate, paper cutter heavy duty ,type/size-9 mm,brand/make-standard quality, camlin individual gum bottle,type/size-150 ml,brand/make-pidilite, report/quotation file ,type/size-fc/legal size,brand/make-keny, two hole spring file,type/size-sprint file,brand/make-standard quality, a4-s lever file,type/size-lever file,brand/make-kokuyo, white board marker ,type/size-marker - red,brand/make-camlin, white board marker ,type/size-marker blue,brand/make-camlin, flap file (board file) (portfoliyo) file board flap,type/size-portfoliyo,brand/make-standard quality, notice board 2 x 3,type/size-2x3,brand/make-standard quality, water bottle (1 ltr),type/size-1 ltr,brand/make-bislary /yes, stapler pin ,type/size-no. 10,brand/make-kangaro, permeant marker ,type/size - cd marker, camlin, fine tip,brand/make-camlin, stapler - hd 10,type/size-no 10 ,brand/make-kangaro, stapler - hd 10d,type/size-no 10d,brand/make-kangaro, stapler ,type/size-pin no.24/6,brand/make-kangaro, stapler,type/size-hp - 45,brand/make-kangaroo, envelopes - ,type/size-white, 11 x 5,brand/make-standard qty, envelopes - ,type/size-white, 12 x 10,brand/make-standard qty, envelopes - ,type/size-white, 16 x 12,brand/make-standard qty, envelope,type/size-16x12 inch polynet,brand/make-standard qty, sharpner,type/size-plastic,brand/make-natraj, punch dp600,type/size-dp600,brand/make-kangaro, punch dp900,type/size-dp900,brand/make-kangaro, punching machine,type/size-no. 800 - heavy duty,brand/make-kangaroo, scissor,type/size-sc 007,brand/make-infinity, paper weight ,type/size-glass,brand/make-standard qty, pen stand,type/size-mesh wire,brand/make-standard qty, pen stand,type/size-plastic ,brand/make-standard qty

Central Government/Public Sector

CTN :43247307

07 Jan, 2026 NA

Erode - Tamil Nadu

Tender For supply of bump cap with micro peak (2.5 cm visor) with inner abs shell and chequred design eva soft pad and cooling mesh for side ventilation. material: nylon or polyester. make/model: portwest, model no: ps-69 (or) of the same specification in ergodyne (or) scott safety first base only.

CTN :43217655

27 Dec, 2025 NA

Kargil - Jammu And Kashmir

Tender For tender for supply of g2/10413012/9505-000059/wire steel mild galvanised 0.56mm , g1/10410842/5306-000676/bolt anf r steel hexagon head zinc coate , h5/10536888/1080-000063/ec nets jute 5.5 x 4 m large mesh 50 mm , h4/10416606/8135-000095/paper wrapping water proof plain 841 mm , h1/10411618/5350-000019/abrasive paper glass is grit 30 size of , g1/10414062/5315-000063/pins cotter split steel 1.6 mm x 16 mm , h1(b)/10412461/6810-000568/blue laundry , h5/10546737/1080-000010 1/ecsg 50 mm mid bronze green , h1/10410758/5350-000031/abrasive powder emery or corundum i.s.gr , h2/10308796/4720-000410/tubing rubber internal diametre 12.5 mm , h5/10536872/1080-000014/ecsg 75 mm undyed , g2/10416208/9525-000074/wire copper soft for general purposes 2. , b1/10405554/1005-557944/pullthrough 5.56mm 1a (nylon) , h1/10411624/5350-000021/abrasive paper glass is grit 50 size of

CTN :43219649

27 Dec, 2025 NA

Bidar - Karnataka

Tender For supply of fuel filter element 1/2ltr , element kit oil filter , element oil filter , fuel filter cartridge nef crde , nylon mesh filter , oil filter cartridge , bypass oil filter , air filter , fuel filter , assy fuel filter , oil filter , oil filter element , fuel filter secondary , fuel filter primary

Central Government And Public Sector

CTN :43186982

05 Jan, 2026 NA

Lumding - Assam

Tender For supply of pvc coated canopy as per item 1 of attached specification document , mocrowwave oven as per item 2 of attached specification document , iron body paint dual as per item 3 of attached specificaiton document , iron body paint arm as per item 4 of attached specificastion document , iron boidy paint dual leg as per item 5 of attached specification document , iron body paint cross as per item 6 of attched specificaiton document , high bac k mesh cahair as per item 7 of attached specificaiton document , nylon woolen rod as per item 8 of attached specificaiton document , iron body paint sky as per iem 9 of attached specification document , iron body paint pull as per item 10 of atttached specification document

CTN :43206566

29 Dec, 2025 NA

Ferozepur - Punjab

Tender For material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in depth and getting

Central Government/Public Sector

CTN :43152866

31 Dec, 2025 NA

Erode - Tamil Nadu

Tender For bump cap with micro peak(2.5 cm visor) with inner abs shell and chequred design eva soft pad and cooling mesh for side ventilation.material: nylon or polyester.make/model: portwest, model no:ps-69 (or) of the same specification in ergodyne(or)scott safety first base only. note: (1) one sample to be got approved before effecting bulk supply.(2) firm should submit the model no. /specification/catalogue of offered make in their offer, otherwise offer will not be considered.

State Government

CTN :43077514

03 Jan, 2026 1.14 Lacs

Midnapore - West Bengal

Tender For construction of fancing with galvanized iron post with mesh wire net of west side of thana pukurpar at hatabari mouza under booth no. 111 ,priority serial no.1, ward no. ix, within contai municipality

Mesh Wire Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

State Government