Latest metal bench Tenders | Government metal bench Tenders

corporations/Associations/Others

CTN :45695761

01 Jul, 2026 NA

Hyderabad-T - Telangana

Tender For providing of certain items for the sports arena in serilingampally circle-49, slp zone cmc - supply, fabrication, and fixing of prefabricated container-type of size 4.2mx 2.4m x 2.4m height, including complete with all required civil works including foundation, electrical, and plumbing works. the unit shall be made with a structural steel frame using is-standard square/rectangular tubes, externally cladded with 1-1.2 mm corrugated gl sheets with anti-corrosive paint, and internally lined with 8-12 mm cement board/laminated board panels including thermal insulation. the flooring shall consist of 18mm waterproof board with vinyl/ceramic tile finish complete for finished item of work as directed by the engineer-in-charge. installation including cost and conveyance of all materials and all labour charges, fixing charges, transportation etc. , supply and fixing of hexagonal frp ornamental gazebo with bench-outer dimension 18 feet 3-inch ms box pipe structure supported columns and clod with frp ms rafter, seating bench and railing cladding for columns and roof made up of frp. the item is finished with aspa colour and polish including transportation etc., complete , providing, supplying and laying 80 mm thick heavy duty aracon flooring blocks/pavers of approved colour, design and pattern over prepared surface including laying in proper line, level and slope, with 20-25 mm thick bedding sand layer, cutting to edges, filling joints with fine sand, compaction with plate compactor, watering, cleaning and finishing.complete as directed by engineer-in-charge.

CTN :45260577

19 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of metallic bench with wooden plank on top , a shaped metallic structures , v shaped metallic structures , t shaped metallic structures , h shaped metallic structures , y shaped metallic structures , l shaped metallic structures , u shaped metallic structures , plus shaped metallic structures , metallic circles , metallic semi circles , metal poles with circular or square plate on top , goal post shaped metallic structures , circular disc attached to poles with chains , metallic drum 1mx60cm , small swings , miscellaneous metallic structures as per diagrams , inclined ramp with support four ramps on one support , figure 8 structure metallic , spider web structure with ropes , ramp and slide set of 4 structures , barrels , balancing beams , screen jump , rope bridge , tarzan swing goal post with platform , double platform set , double ditch goal post , commando walk , tiger leap goal post with platform , rope climbing goal post , grout points , cement pcc blocks , gst 18 percentage ) /bid number : gem/2026/b/7427728 * /dated: 20-05-2026 & & / bid document 1 / 31

corporations/Associations/Others

CTN :45434095

17 Jun, 2026 NA

Keonjhar - Odisha

Tender For supply and installation of ornamental frp items, children's play equipment, open gym equipment and decorative lighting for development works under msby within anandapur municipality elephant sliding , hip hop - sea saw , swing circular , merry go round , multiple play station 3 canopy , namaste statue (frp) , giraffe (frp) life size , elephant (frp) life size , mermaid (frp) life size , tiger (frp) life size , gorilla (frp) life size , dinosaur (frp) life size , peacock (frp) life size , deer family (frp) life size , lion (frp) life size , stone like (frp) , namaste statue (red sand stone) life size , big pot (red sand stone) life size , elephant (red sand stone) life size 3.5ft , mermaid (red sand stone) life size 4ft , flower pot (red sand stone) , fountain (red sand stone) , chair (r.c.c.) , bench with the dumble , leg press (double) , leg press (single) , chest press (single) , sky walker , twister hand , waist twister , pole with light (3 meter) , bollard light , strip light , selig points with letters glowing , artificial decorative trees

CTN :45036193

05 May, 2026 NA

Delhi - Delhi

Tender For expression of interest document for supply and delivery of school requisites 2026 for secondary schools (design and technology) - supply and delivery of school requisites 2026 for secondary schools (design & technology) - angle grinder, band saw, bench drilling machine, bench grinder, circular saw, compressor, spraygun, drilling machine (portable), extension cable, hot wire cutter, jig saw (portable), metal lathe, planer / thicknesser, router (portable), sander -orbital, soldering iron, strip heater, welding machine, wood working lathe, abrafile frame, adjustable spanner, adjustable spanner, anvil, bench hook*, bench shear (guillotine), bradawl, carpenters mallet, centre punch, centre square, chisels- mortice, chisels- mortice, chisels -bevelled edge, chisels -bevelled edge, chisels -bevelled edge, chisels- firmer, chisels- firmer, chisels- firmer, cold chisels, combination drill, combination pliers, coping, saws, corner clamps, countersunk bit, dividers, engineers square, engineers vice, forstner bit, g cramps, g cramps, hacksaw, hammer: ballpein, hammer: ballpein, hammer: ballpein, hammer claw, hammer cross pein, hand drill, hand files including handles, hand files including handles, hand files including handles, hand saws, hand saws, inside calipers, jack plane, jenny calipers, junior hacksaw, machine vice, marking gauge, marking knife, measuring tape, metalwork bench, mitre box, mole grip, nail punch, needle files, oil can, oil stone, outside calipers, pincers, pipe wrench, rasps, ring spanner, riveting machine kit, router bits, sash cramps, saw set, screw driver, screw driver, scriber, sliding bevel, smoothing plane, spanner - open ended, spirit level, spoke shave, spoke shave, steel rule, taps and dies, tenon saws, tinmans snip, tinmans snip, try square, v-block and clamp, vernier calliper, wire brush, woodwork bench, woodworkers bench vice, blackboard compasses, blackboard protractor, blackboard rule, blackboard set squares, design tables, isometric-grid blackboard*, square-grid blackboard*, whiteboard compasses, abrafile blades, coping saw blades, emery cloth, emery cloth, emery cloth, goggles, hacksaw blades, junior hacksaw blades, masks - respiratory, masks - dust, paint brush*, paint brush*, paint brush*, welding apron, welding gloves, welding rods.

CTN :44926927

27 Apr, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply and delivery of school requisites 2026 - angle grinder-grinding wheel, diameter 110 mm , power range, 750w to 2000w, 240v + key (eu), band saw-table size 400 x 548, mm, 900 w or 340 x 335 mm, 350, w 240 v + blade and sense (eu), bench drilling machine-13mm, chuck, 240v, minimum table size, 260 x 180 mm + chuck key (eu), bench grinder-minimum 250 w,, 240v, circular saw-minimum 1.5kw,, 240 v + fence and cross-cut guide, (eu) (table mounted), compressor -output 50l/min, 6, bar, 340 w + supply hose and clips, (eu), spraygun-0.7 mm nozzle, diameter, 800 cl capacity (approx), (0.7 mm - 1.4 mm), drilling machine (portable)-, chuck diameter 3 - 16mm, 240 v +, chuck key, extension cable-20 metres, hot wire cutter-40 w, 240v, jig saw (portable)- power range, 300 600 w, 240v + allen, key(eu), metal lathe-1.5kw, distance, between centres 750 mm, including tool bit, boring bar,, knurling tools, parting tools, tail, stock, chuck key, centre drill, dead, centre, revolving centre, face, plate, 4-jaw and 3-jaw chucks., (eu), planer / thicknesser-maximum, planing width 310mm,maximum, thicknesser capacity 230, mm,power range 3kw to 4kw,, 240 v + fence(eu, router (portable)- power range, 1200w to 1800 w, 240v + key, (eu), sander orbital-power range 250, w to 300 w, 240v (eu), soldering iron-80 w, strip heater-140 w, 240v, welding machine-electric arc, 6kw, 150a, 240v (with protective, casing) incluing clamp, cables and, shield. (eu), wood working lathe-distance, between centres 1093 mm, 550, w, 500 - 2000 revolutions per, minute including face plate, dead, centre, revolving centre, turning, tools and tool rest., abrafile frame-4" deep/blade, length 6" (+ blade on frame), adjustable spanner-jaws open : 22, mm length: 200 mm, adjustable spanner-jaws open : 31, mm length: 300 mm, anvil-50kg, bench hook*-material: beech, size:250 mm x 150 mm, bench shear (guillotine)- up to 4, mm sheet and 10 mm rod, bradawl-minimum blade length, 32 mm, carpenters mallet-4.5 head width, centre punch-round head,, knurled body, 4" length, centre square-std size 75 mm, chisels- mortice-size: 6 mm, chisels- mortice-size: 9 mm, chisels -bevelled edge-size: 12, mm, chisels -bevelled edge-size: 19, mm, chisels -bevelled edge-size: 25, mm, chisels- firmer-size: 6 mm, chisels- firmer-size: 12 mm, chisels- firmer-size: 25 mm, cold chisels-type: flat, size:150 mm x 12 mm, combination drill-std drill set, combination pliers-size: 200 mm, coping saws-blade length: 150, mm, corner clamps-cramping capacity, 4" mild steel type, countersunk bit-head diameter:, 3/8" length: 2", dividers-length 6", engineers square-length 6", engineers vice-jaw width: 6", engineer's swivel base table (50, mm), forstner bit-bit set: sizes 10, 12,, 15, 16, 18, 20, 22, 25, 26, 28, 30,, 35, 40, 45 & 50 mm, gcramps-capacity: 6", gcramps-capacity: 12", hacksaw-non-adjustable 12", tubular frame wing nut tensioning, device for 12" blades, hammer: ballpein-0.5 lb, hammer: ballpein-0.75 lb, hammer: ballpein-1 lb, hammer claw-0.5 lb, hammer cross pein-0.75 lb, hand drill-chuck capacity 8 mm, hand files including handles-size:, 6", hand files including handles-size:, 8", hand files including handles-size:, 10", hand saws-22" long - cross cut, hand saws-22" long -rip, inside calipers-arm length 6", jack plane-14" long, jenny calipers-arm length 6", junior hacksaw-length blade 6", machine vice-maximumm jaws, opening 85mm, marking gauge-minimum length, 240mm, marking knife-length of body, 15cm, measuring tape-measuring length:, range 3m to 5 m, metalwork bench-size 2010 x 810, x 800mm, mitre box-mitre block 9" long, (plastic), mole grip-length 7, nail punch-set of 4 nail punches;, 1.5, 2.5, 3 & 5 mm, needle files-set of 6 - 14cm, oil can-2 pints capacity (1-2 pint), oil stone-150 mm length, outside calipers-arm length 6", pincers-length of body: 180 mm, pipe wrench-length: 300 mm, rasps-length size: 200 mm - 350, mm, ring spanner-set 6mm 25mm, riveting machine kit-sets rivets, up to 5 mm

CTN :44855539

25 Apr, 2026 NA

Sangli - Maharashtra

Tender For corrigendum : providing of customized amc/cmc for pre-owned products - customized amc/cmc for pre-owned products providing, installing and commissioning of heavy-duty metal benches suitable for indoor/outdoor use, having minimum 3-seater capacity, complete as per detailed spec..

Metal Bench Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others