Latest metal cabinet Tenders | Government metal cabinet Tenders

State Government

CTN :41204633

31 Jul, 2025 17.86 Lacs

Delhi - Delhi

Tender For maintenance of completed scheme under na-ii/south zonesh-providing and installation of digital safety system and safety equipments in community halls of kishangarh and harkesh nagar (specialized work) - supplying and installation of high quality image with 4 mp ip bullet camera, audio recording 1/2.8"cmos sensor, 4 mp (1920*1080)@30/25fps; 720p (1280*720)@30/25fps, ultra 265, h.265, h.264, smart ip, up to 30m (98ft) ip distance, day/night functionality, 2d/3d dnr (digital noise reduction), ip67 protection, support poe power supply, 3- axis, , lens - 2.8 mm- 6 mm@f2.0, adjustment angle, pan: 0 ~ 360 , shutter - auto/manual, 1 ~ 1/100000s, minimum illumination - colour: 0.01lux (f2.0, agc on) 0lux with ir on, , digital noise reduction - 2d/3d dnr, day/night - ir-cut filter with auto switch (icr), s/n - >52db, ir range - up to 30m (98ft) ir range, wave length - 850metre, ir on/off control - auto/manual, defog -digital defog, wdr - dwdr, 10/100m base-tx ethernet, ce: en 60950-1 ul: ul60950-1 fcc: fcc part 15, complete as req. make:- hikvision / advidia / dahua/bosch or equivalent as approved by the engineer-in-charge., supplying of nvr support ultra 265/h.265/h.264 video formats, 16-channel input, third-party ip cameras supported with onvif conformance: profile s, profile g, profile t, support 1-ch hdmi, 1-ch vga, hdmi at up to 4k(3840x2160) resolution, hdmi and vga simultaneous output, up to 4k resolution recording, 4 sata hdd up to 10tb, support cloud upgrade, ip video input - 4-ch, upto 160 mbps incoming and outgoing bandwidth, remote users - 128, protocols - p2p, upnp, ntp, dhcp, pppoe, video/audio output - hdmi/vga output - hdmi: 3840x2160/30hz, audio output - 1-ch, 3.5mm ,decoding format - ultra 265/h.265/h.264, sata - 1 sata interface, capacity - up to 6tb for each disk, network interface - 1 rj45 10m/100m self-adaptive ethernet interface complete make:- hikvision / advidia / dahua/ bosch or equivalent as approved by the engineer-in-charge, supplying of 6 tb hdd for nvr complete as req. make- seagate, wd, toshiba or equivalent as approved by the engineer-in-charge., supplying of 16 port gigabit poe switch easy smart managed 16 poe+ (802.3at/af)10/100/1000 mbps rj45 ports providing up to 30w per port total @ 250 watt, 2 non-poe ports total 18 port 2 combo sfp slots for high speed connection i/c testing etc. complete as req. make: cisco/ tp link/ juniper/ netgear/ or equivalent as approved by the engineer-in-charge., supplying and drawing of utp 4 pair cat 6 lan cable in the existing surface/recessed steel/ pvc conduit as required and approved by the engineer-in-charge. make: d-link/ cp-plus/ finolex / havells or equivalent as approved by the engineer-in-charge., supplying of fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 25 mm as approved by the engineer-in-charge., supply, installation, commissioning of 43 (108 cm) 4k ultra hd smart led tv with usb port for cctv surveillance system i/c testing etc. as required. make: samsung / lg/ sony or equivalent as approved by the engineer-in-charge., supply, installation, commissioning of 6u outdoor weatherproof rack confirms to ip55 outdoor standards. adjustable 19 equipment mounting verticals provide better mounting flexibility and maximize the usable mounting space depth adjustable mounting slots pole/ wall mounting provision on rear side top panel with ventilation cable entry from bottom. pdu of 6 socket and fan, lockable toughened glass door, powder coated sheet metal cabinet factory with accessories i/c wall mounting, fixing, testing etc. complete as req. make: server rack/ netrack/ dynamic/ rittal or equivalent as approved by the engineer-in-charge, supply, installation, commissioning of online ups 1kva 24 volts inbuilt ovcd for 1-2 hrs. backup for nvr and cameras, monitor i/c wall mounting, fixing, testing etc. as required make: microte

CTN :41220400

16 Aug, 2025 NA

Shimla - Himachal Pradesh

Tender For tender for supply of soil investigation - mobalisation of necessary eqpt and man power to the project site and dismantling of the same of completion of field work from the site , provision of two bore hole of 150 mm dia in any type of soil upto max 10 mtr or upto refusal n 100 whichever meet first conducting standard penetration test as per is 2131 1981 reaffirmed 2016 test shall be made at not more than 1 50 mtr interval or on change of strata whichever is less , conducting following lab test on bore collected soil sample i direct triaxial shear test ii grain distribution curves & pattern in bore holes iii bulk density iv natural moisture content v dry density vi water table vii specific gravity viii atterberg limit ix hydrometer analysis x liquid & plastic limit xi swelling index , collection of lab test data calculation of gross and net safe bearing capacity and preparation of report on minimum 80 gsm a4 size white paper duly spiral bound in quintuplet duly vetted by any iit nit vetting shall not be in the personal capacity of the professor for foundation report shall recommend type of foundation and sizes at different depths below ngl including size gross and net safe bearing capacity , i photographic record of geo exploration as well as testing shall also part of the report ii recommendation as regards possibility of liquefaction of soil in case of saturated or partially saturated loose uncompacted sandy soil iii swelling index and swelling pressure in respect of black cotton soil and its depth layer if any iv depth of gr water table gwt in peak mansoon lowest and peak summer highest after correlation of result with seasonal of water table in the station v recommendation for filling under floors vi rl of ground level foundation level with ref to a bm should invariably be mentioned in the soil investigation report

CTN :41209608

04 Aug, 2025 NA

Barmer - Rajasthan

Tender For supply of cp plus 16ch 2 sata h 265 4k nvr cp unr 4k2162 v3 , cp plus ip 1mp hybrid bullet camera 3pint6mm with audio cp unc ta41pl3c l y , cp plus poe switch 8 port 8 ge 2 ge port cpdnw gpu8g2 96 v4 , seagate skyhawk 6tb sata 3point5 inch surveillane cctv hard disk 3 year warranty , outdoor cat 6 copper cable networkcable roll 305 per meter , dlink connectors , 5x5 pvc square junction box cctv waterproof , logi tech wireless mouse 19500 , 2upoe outdoor rack metal , 4u cctv dvr rack oblique nvr oblique server oblique network rack transparent glass door metal cabinet box , clipping wire 1point5mm dia 90m length

CTN :40811530

04 Aug, 2025 2.99 Lacs

Ernakulam - Kerala

Tender For corrigendum : supply of hat stand with mirror , hot case large , notice board size 2440 mm x 1220 mm without glass shutter , safe meat and milk , table cook with marble top , table pantry , teapoy verandah , table 900 x 600 x 760mm with drawer , disply board , form with back , side rack with tray

CTN :41239536

02 Aug, 2025 NA

Lucknow - Uttar Pradesh

Tender For execution of work of “loading-carriage-unloading of damaged distribution transformers from site of its damage up to store centre/repair workshop and its proper stacking and loading-carriage-unloading of repaired/healthy transformer from store centre/transformer repair workshop up to site of its damage & mounting on plinth/double pole and its proper connection & safe carriage of transformer mobile trolley from damaged transformer site to substations or other site as the case may be, after disconnecting the trolley from electrical system against o & m head (year-2025-26) in the area of eudd, gomtinagar, lucknow.

CTN :41207807

11 Aug, 2025 99.00 Lacs

Baran - Rajasthan

Tender For supply of furniture in govt college mangrol - sofa (2seater), sofa (3seater), centre table, centre table, cushioned chairs, lecture podium, display borad, pigeon hole almirah, chair with writing pad, glass door almirah with locker, computer table, computer cum printer table, computer chair with arm, library table, library chair, mattress, 3 seater visitors chair, white green board, principal table with glass, visitors chair, green carpet, magazines rack, steel almirah with locker, steel book case, steel table, steel table, office chair, steel library shelves (7 shelves), steel trunk with stand, student table, student chair, steel iron safe, hostel bed

Central Government/Public Sector

CTN :41251846

02 Aug, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of digital vernier caliper with range of 0 to 8 inch, least count of 0.0005 inch, accuracy up to +/- 0.0015 inches carbide - tipped jaws for od a nd ld measurement, large and clear lcd readout, with thumb roller & locking screw, supplied in a fitted, high-impact plastic case for safe storage and easy tr ansport with necessary calibration certificate to be submitted at least for 1 year validity from nabl or nabl accredited laboratory of make : mitutoyo,insize,st arret,baker. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40985784

11 Aug, 2025 2.50 Crore

Mohali - Punjab

Tender For corrigendum : purchase of recovery and rejuvenation lab. - infrared sauna tower irradiance: 55-110 mw/cm2, providing therapeutic benefits rated power: 100-240v ac, 2 amp, 50-60hz, suitable for standard electrical outlets wattage: 350w, combining red light and near-infrared therapy wavelength: 650nm (red light) and 850nm (near-infrared), promoting healing and relaxation led arrays: 70 red light leds (650nm) and 70 near-infrared leds (850nm), ensuring optimal coverage variable optics: 7 60-degree optics for maximum impact and quicker results. emf emissions: no detectable emf emissions at 10-15cm, prioritizing user safety. infrared sauna units with below mentioned features to be preferred- heaters: full spectrum heaters (400w each) or carbon fiber heaters (up to 2160w total power) temperature control: digital temperature and time control for customizable sessions materials: canadian hemlock wood or western red cedar, known for durability and hypoallergenic properties additional features: bluetooth connectivity, chromotherapy lights, and built-in stereo speakers for an enhanced experience. energy efficiency: reduced electricity consumption for cost-effective use temperature range: operating temperatures between 115 f and 140 f for comfortable sessions safety features: person-specific designs and low emf emissions for safe use, cryotherapy chamberwhole body cryo therapy chamber that runs completely on electricity without need of liquidnitrogen low temperatures within the range: -130 to -140 degree celsius. multiple treatment options electric mechanical lift system ensures user s head is outside the chamber to prevent exposure to cryogenic temperatures. real-time skin temperature monitoring using ir tech sensors ensuring safe and controlledcooling. smart software that manages the treatment processes throughout each session. simple quick plug-and-play set up without requiring specialized ventilation. large uhd touchscreen for easy operation and control. at least 3 media monitors for displaying media content. hifi speakers for audio entertainment and ambient audio. work on normal indian 220v at 16a or less, whole-body pneumatic lymphatic drainage machine:key features- multi-chamber design: multiple chambers that inflate and deflate in sequence to mimic manual lymphatic drainage- adjustable pressure: adjustable pressure settings to accommodate different patient needs and comfort levels- programmable treatment: programmable treatment protocols for customized therapy sessions- user-friendly interface: intuitive interface for easy operation and programming- input voltage: ac110v/220v- power consumption: less than 400w- screen: 8-inch wide color touch screen- air pressure: 20-360 mmhg (max pressure 37.5kpa)- cooling device output temperature: 5 to -16 c- output vacuum pressure: 0-110kpa- default time: 0-60 minutes- fuse size: f3al250v- ambient temperature: 5 c to 42 c- number of air bags: 24 bags or 16 pairs atleast - treatment modes: 4 modes atleast - intensity levels: 3 levels- package size: 62x42x31cm approx - gross weight: 15 kg approxsafety features- automatic pressure adjustment: automatic pressure adjustment to prevent excessive pressure and ensure patient comfort- emergency stop: emergency stop feature to quickly deflate chambers in case of discomfort or distress- patient monitoring: optional patient monitoring capabilities to track vital signs and treatment responseadditional features- multiple treatment modes: multiple treatment modes for different conditions, such as lymphedema, edema, and post-surgical swelling- data logging: optional data logging capabilities to track treatment parameters and patient progress- portability: optional portable design for increased flexibility and convenience.certifications: ce or fda clearance, percussion massager (gun massager)key features- percussive action: a percussive action that provides rapid and repetitive strokes to muscles and tissues- adjustable speed: adjustable speed settings to cust

State Government

CTN :40985789

11 Aug, 2025 3.50 Crore

Mohali - Punjab

Tender For corrigendum : purchase of biomechanical lab - force platedimensions (w x d x h) in mm : 600 x 400 x up to 50 number of axes for force measurement: all 3 axes. x,y,z plate should be portable in naturesensor type: piezoelectricsampling frequency-(hz) =1000 hz or more force measured on each axis-fx,fy: 2,000 newton or more, fz: 10,000 newton or more hysteresis- (%fso): 0.5 linearity (%fso) 0.5 crosstalk (%) : 2water resistance rating: ip 50 or better.should be inclusive of installation.should be supplied with carrying case for 2 plates and noise free ups for on-ground assessment. the carrying case should be strong and sturdy.should be able to accommodate portable force plate 9286 ba, daq box 5695 and connecting cablesshould be able to protect the equipment from rain, impact and dust, should have rollers to move easilyshould be able to accommodate an ups also., isokinetic dynamometershould be able to access/test various joints in isolation should be able to meet requirements to test sports personsshould be able to test in different resistance modes such as isokinetic (concentric-concentric, concentric-eccentric ,eccentric, concentric ,and eccentric-eccentric), isotonic, isometric, and passive protocols should include options for angles, hold-times, rest period, repetitions, and sets. the system should be able to test all the major body segments and joints such as shoulder, forearm, elbow, wrist, hip, knee, and ankle.should have adjustable range of motion stops in full 360 degrees.should have 360-degree rotation for the force arm (connecting dynamometer to the pedal) to have wide range of motionshould be able to accommodate different athletes with varying height and weight with provision for seatbelt harness for better stabilitythe dynamometer or chair should be movable to accommodate different athletes for quick set-up and better usability with locking clamps for securing the system in place for testingshould be able to do gravity correction when the limbs are positioned with the lever arm on the dynamometerthe software should be provided to analyze the raw data and export the raw and processed data in different file formats such as excel, text, etc. the software should provide detailed report for various testing protocols such as individual test for joints, data/graph overlay for comparing pre and post testing, repeatability, progress, multi-session.should be provided with latest compatible workstation/laptop of reputed brand like hp, dell (latest generation) processor, minimum16gb ram, windows os 11, and laser printerconcentric speed: 500 deg/sec or more eccentric speed: 500 deg/sec or more concentric torque: 500 ft-lb (678nm) or more eccentric torque: 500 ft-lb (678 nm) or more isometric torque: 500 ft-lb (678 nm) or more isotonic torque: 500 ft-lb (678 nm) or more isotonic torque as low as .5 ft-lbfeedback formats: roadway, interactive line, interactive path, reaction training, proprioception training, breakout, and pong.torques. time, torques. angle, torque bars, work bars, power bars. it should be possible to use mechanical stops even with custom patterns (important for safety in research)the same attachment should be usable for left and right side of subject for consistencies in data.should be certified and approved by ce/eu medical devices directives or usfda, nord boardit should be portable and should have 2 load cell sensors per unit with easy to attach hooks pivoting 360 degrees joint improving sensor accuracy it should have knee position indicator for replication of test position in each time. should have sample rate per sensor: upto 400hz, capacity per sensor: 100 kg/980-1000n safe over load per sensor: 150kg/1500n, max over load per sensor: 200kg/ 2000n, resolution: 1n and sensitivity: 22.0+/-mv/v. should have rechargeable battery & battery life should be100 active hours approx. should have working temperature range 5-40 c. (all weather proof) latest upgradable software should have both wired & wireless conne

Central Government/Public Sector

CTN :41153288

11 Aug, 2025 24.80 Lacs

Likabali - Arunachal Pradesh

Tender For provn of furniture for otm and tech infra for (ph-i) at likabali mil stn under ge 872 ews - chair easy (drg no.fd-229 ), chair writing (drg no. fd-280), chair dining ( drg no. fd-279), charpoy ip hard top ( drg no. fd/map-ii/01), chair wb without arms ( drg no. fd-285), chair cba steel ( ( drg no.fd-386), desk with wooden dias ( drg no. fd-399), display board of size 2440x1220mm (( drg no. fd-99m), form without back ( drg no.fd-1027), hot case large ( drg no.fd-402), pointer long 1525mm ( drg no. fd-1041), pointer medium 1200mm ( drg no.fd-1041), pointer small 900mm ( drg no.fd-1041), receptacle pvc with lid ( drg no.fd/e6/map/13), stool steel ( drg no.fd-409), safe meat and milk ( drg no.fd-407), table 600x600x760mm with drawers. ( drg no.fd-293), table 900x600x760mm with drawers ( drg no.fd-283), table 900x600 without drawers ( drg no.fd-284), table dining 6 persons ( drg no.fd-273), table cook house with marble top of size 1530x900x760mm. ( drg no. fd-136m), table centre two tier ( drg no.fd-393)

Metal Cabinet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector