Latest metal cage Tenders | Government metal cage Tenders

Central Government/Public Sector

CTN :45407106

01 Jul, 2026 NA

Kapurthala - Punjab

Tender For set of carline for memu dmc 3-phase coaches with high rise panto & tcas facility, as per drawing: mp26cardmc version 0, packing instruction: carline assly the supplier shall pack the three c/set (segments) of carlines in a suitably designed robust returnable metallic cage/structure in such a way that carlines shall not get entangle, damaged, twisted, dented during transportation, storage, handling and lifting and to avoid scratches on outer surface suitable environment friendly cushioning material is to beplaced between two segments, transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodate fork lifter arms for lifting and transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's identification/color mark. the packing cages along withset of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45469917

22 Jun, 2026 17.79 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of cage, seat ring, plug, stem and pin for fcv1and7 , lock nut stem1 14 uns 2b, p.no.010866063-110-0000 , lock nut act size 16 and 23 87 and 88, p. no.010866034-110-0000 , cap screw hex head m16x2 1 set equal to 6 nos., part no. 971012043-110-0000 , stem connector bottom 87_88 sz 16 and 23, p.no.010866014-779-0000 , stem connector top 87_88 sz 16 23, part no. 010866013-779-0000 , all type of body gasket for feed control valve dresser make model no. 88-41325 , seat ring for feed control valve dresser make model no. 88-41325 , metallic cage ring for feed control valve dresser make model no. 88-41325 , total coupling set with nut and bolt for feed control valve dresser make model no. 88-41325 , plug stem for feed control valve dresser make model no. 88-41325 , cage for feed control valve dresser make model no. 88-41325

CTN :45468027

19 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of floor trap of 75mm dia with grating , pvc swr gully trap of size 110mm dia , pvc pipe 100mm bore 20ft long , pvc swr 110 mm dia pipe with three socket , stainless steel storage racks , stainless steel serving platform , stainless steel vegetable cutting table , preparation table , deep freezer of 200 ltr capacity , grill cage , chula , dining table , dining chair , synthetic enamal paint dark brown 4ltr pack , synthetic enamal paint og 4ltr pack , thinner , painting brush 50mm , painting brush 100mm , painting brush 125 mm , cement base paint weather proof , gi plate 600mm x 600mmx 6mm thick , ci cover of size 290 x 290 x 6 mm , glpipe 40 mm dia medium grade 04 m , gi strip of size 25 x4 mm 08 m , salt , ms funnel with wire mesh 01 no , gi pipe 20mm dia med grade , gi reducer 40 x 20 mm isi marked , ms rod 6 mm dia 2 long , charcoal dust , 5 mm dia 30 mm long gi bolt with nut , air termination single pointed copper rod 12mm dia and 300mm long , gi pipe 100mm dia 2 m lomg medium grade with base plate , back fill compound , ci manhole cover of size 30cm x 30 cm with handles , aluminium strip 25 x 3 mm , gi strip 32 x 6 mm rm 03 , insulator for fixing down conductors as per relevent is 25 nos , vitrified floor coloured tiles , anti skid coloured floor tiles , perforated type gypsum board false ceiling panel , kota stone flooring 25 mm thick , mild steel chromium plated 25 mm dia and 3mm thickness drapery rod , integral water proofing compound , white or coloured cement to match the floor finishes surface , fire extingusher one kg capacity , drill bits 3 mm size , drill bits 6 mm size , drill bits 8 mm size , drill bits 10 mm size , drill machine high speed heavy duty qty , hacksaw frame with 5 bladeboth side teeth , screw driver blade length 300 mm, blade dia 6 mm qty , hammer , magnetic nut setter of size 8mm , parthal wooden planks for shuttering , circular tile cuting machine with 5 blade , panel steel cuting dimond blade , aluminium planer for mason , brick trowel , brick hammer , insulated plair side cutting 250 mm , measuring tape 30 mtr long , water level pipe l equal to 20 mtr qty , bonding adhesive , mild steel material handling trolley

CTN :45468350

29 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of 110mm dia , pvc pipe 100mm bore 20ft long , pvc swr 110 mm dia pipe with three socket , stainless steel storage racks , stainless steel serving platform , stainless steel vegetable cutting table , preparation table , deep freezer of 200 ltr capacity , grill oblique cage , chula std size 12 x 44 x 10 inch , dining table of 04 person seating , dining chair with a stainless steel structure , synthetic enamal paint dark brown , synthetic enamal paint og , thinner , painting brush 50mm , painting brush 100mm , painting brush 125 mm , cement base paint , gi plate 600mm x 600mmx 6mm thick , ci cover of size 290 x 290 x 6 mm , gi pipe 40 mm dia medium grade , gi strip of size 25 x4 mm , salt , ms funnel with wire mesh , gi pipe 20mm dia med grade isi marked , gi reducer 40 x 20 mm isi marked , ms rod 6 mm dia 2 ft long , charcoal dust , 5 mm dia 30 mm long gi bolt with nut , lightening rod , gi pipe 100 mm dia 2m long medium grade with base plate , back fill compound , ci man hole cover of size 29 cm x 29 cm with handles complete , aluminium strip 25x3 mm , gi strip 32 x 5 mm , iron spikes 18 inch long , gi nipple 20 mm dia and 10 cm long is 1879 , lightning terminal coppper with 5 nos prong 15 cm long complete , ms clamp 40x2mm with nut and bolt complete , gi wire 12 guage confirming to is 2062 oblique 1991 , gi pipe 40 mm dia medium grade isi marked , gi reducer socket 40 mm x 20 mm for connecting prong to pipe , vitrified floor coloured tiles of size 600 x 600 x 10 mm thick , anti-skid coloured floor tiles of size 300x300x7 to 8mm for steps , perforated type gypsum board false ceiling panel of size 595 x 595 mm 8 mm thick , kota stone flooring 25 mm thick achine cut mirror polished of minimum size 280 mm x 280 mm , mild steel chromium plated 25 mm dia and 3mm thickness drapery rod of approved make coloured of size 1.20 m long with end caps , mild steel chromium plated 25 mm dia and 3mm thickness drapery rod of approved make coloured of size 1 point 50 m long with end caps , integral water proofing compound , white or coloured cement to match the floor finishes surface , fire extingusher one kg capacity

Central Government/Public Sector

CTN :45431581

09 Jun, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - 98050114 scrap signaling, p way and ohe items, c & w items- ms, gi,ci containing signaling units, rods, ms, gi structures, ladders, mast, etc. and all other types of signaling items, gear case, the ground connection, ohe fitting,ms chains, heavy structure almirah/racks, rods angle, channel, pipes, lc material, ladders, jali, pantograph with or without pneumatic motor, gate, door, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley, angle , rib cage, wagon body cut piece bogies side frame, machines, st sleeper, ms sheet,various types sleeper part, tie bar, fencing bars, i-beam empty drums, light fittings, rail pieces, ms wires,showel, bush for brake rigging, angular ring , end plate for axle box, axle end cap for wap, axle box, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine, electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate, step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component and wiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins, screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle box housings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, longer hanger, spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers, compressor spares, tension rods bushes, dash pots,angle, bond, location box with or without their component and wiring fittings, trolly, diffrent type of ohe band of rail and other various ms fabricated structures of sorts and sizes with or without parts fittings miscellaneous items, etc. and non-ferrous attachments, unserviceable.

Central Government/Public Sector

CTN :45431584

09 Jun, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous material consisting of s&t, p way, works and ohe items c & w items- such as ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. and all other types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks, rods angle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, spring plank, pantograph with or without pneumatic motor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley, rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet, various types sleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junk light weight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter, light weight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort and sizes, g.i. buckets, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan, frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine, electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate, step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component and wiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins, screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle box housings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, longer hanger, spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers, compressor spares, tension rods bushes, dash pots, ms& wi turning borings cut, collars, vehicle spares, ci items consisting of rusty and dusty drainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pig irons pieces, signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds, ms rack, almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic, mica, foam seat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, parts of point machine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler, knuckles, cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, and assorted cut pieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer race of bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fan armatures, chain sling, rev. center, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silent blocks, cut pieces of plates, doors, angles, etc., all plastic items, rubber and wooden , fasteners such as bolts, nuts, and other related misc, etc., with or without, rail, of sorts and sizes with or without parts fittings and minor non-ferrous attachments, unserviceable. excluding items - railway track. remarks:the quantity estimation is based on visual observation and is indicative only. the lot has been prepared to clear the land before handing over the scrap yard for memu work. 2. loading will be allowed

Central Government/Public Sector

CTN :45396402

08 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of set of carline, as per drawing: mp19carvp version 2, packing instruction: carline assly the supplier shall pack the three c/set (segments) of carlines in a suitably designed robust returnable metallic cage/structure in such a way that carlines shall not get entangle, damaged, twisted, dented during transportation, storage, handling and lifting and to avoid scratches on outer surface suitable environment friendly cushioning material is to be placed between two segments, transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodate fork lifter arms for lifting and transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's identification/color mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45297350

28 May, 2026 NA

Kapurthala - Punjab

Tender For set of carline complete for lhb ac 2tier amrit bharat 3.0 coaches., as per drawing: mp26ab3ac2tcarl version 0, packing instruction: carline assly the supplier shall pack the three c/set (segments) of carlines in a suitably designed robust returnable metallic cage/structure in such a way that carlines shall not get entangle, damaged, twisted, dented during transportation, storage, handling and lifting and to avoidscratches on outer surface suitable environment friendly cushioning material is to beplaced between two segments, transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodate fork lifter arms for lifting and transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's identification/color mark. the packing cages along withset of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45303354

08 Jun, 2026 NA

Ropar - Punjab

Tender For tender for supply of bearing no. 6005-zz (metallic cage) , bearing no. 6202 (metallic cage) , bearing no. 6301 (metallic cage) , bearing no. nu-217 (metallic cage) , bearing no. 22316 (metallic cage)

Central Government/Public Sector

CTN :45283760

22 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of set of carline for lhb ac tier amrit bharat 3.0 with flat roof, as per drawing:mp26carab3tf version 0, packing instruction: carline assly the supplier shall pack the three c/set (segments) of carlines in a suitably designed robust returnable metallic cage/structure in such a way that carlines shall not get entangle, damaged, twisted, dentedduring transportation, storage, handling and lifting and to avoid scratches on outersurface suitable environment friendly cushioning material is to be placed between two segments, transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodate fork lifter arms for lifting and transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's identification/color mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ] ]

Metal Cage Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors