Latest metal cladding Tenders | Government metal cladding Tenders

CTN :43213397

18 Dec, 2025 NA

Ranchi - Jharkhand

Tender For quotation for purchase of 100 no the desk bench frame must be made out of 25.4x25.4x1.2mm thk ms erw tube powder coated upto 50-60 microns at base which must be welded the desk and seat supports which must be made up of 1mm thk powder coated ms u section. the stiffeners must be provided between 2 vertical frames at base and back of seat which are made up of 25.4x25.4x1.2mm thk powder coated erw tubes. the tubes must be closed with plastic caps. additional powder coated ms u sections must be provieded below the desk and seat to add rigidity to the structure. the storage shelves must be made up of 0.6mm thk powder coated ms sheet affixed below the desk either sides of the vertical frame of the desk for hanging. the complete understructure must be assembled using of m5 taptite screws. the seat, back and desk panel must be provided which must be made up of 25mm thk bwr grade plywood with 2mm pvc edgebanding. (minor irrigation)

Central Government/Public Sector

CTN :43163380

26 Dec, 2025 7.91 Lacs

Chennai - Tamil Nadu

Tender For elevating the existing ht panel board, capacitor panel board (lt panel) above maximum flood level with suitable ms structure platform at ss 1 and ss 3 in csir campus

corporations/Associations/Others

CTN :42721109

30 Dec, 2025 2.21 Crore

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : manufacture, fabrication, supply,erection, testing and commissioning with 1x8 mva pr.tr,stn transformer, associated equipments, accessories, control panels, control room and electrical works at o.krishnapuram in trichy metro under tkc thro e tener - electrical material supply, power transformer 33/11kv, 8mva power transformer with oltc, breaker along with ct for outdoor ss 33 kv (gc) vcb (out door) 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (600-300/1-1a) with structure and complete accessories with breaker platform., 11kv (lv) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulatedwith permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (1200-600/1-1a) with structure and complete accessories with breaker platform., 11kv (feeder) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (400-200/1-1a) with structure and complete accessories with breaker platform., potential transformer 33kv potential transformer with tc (single phase unit), 11kv potential transformer with tc (three phase unit), panels ac panel for 33kv ss, 110 v dc annunciation panel type b, 110v dc indoor c&r panel for gc breaker, 110v dc indoor c&r panel for lv breaker, 110 v dc indoor c&r panel for twin feeder, control cables, junction box and accessories 14c x 2.5 sq.mm copper cable armoured, 8c x 4 sq.mm copper cable armoured, 4c x 4 sq.mm copper cable armoured, 4c x 2.5 sq.mm copper cable armoured, 2c x 2.5 sq.mm copper cable armoured, isi mark 19 / 22 mm cable gland as directed by the field engineer., isi mark 25 mm cable gland as directed by the field engineer., isi mark cable 28 mm gland as directed by the field engineer., lugs, ferrules, sleeves, cable tie, insulation tape and other accessories for providing cable core end termination, supply of gi chequerred plate 6mm thickness, junction box supply of ct/pt junction box made out of 14swg (2mm) m.s.sheet wherever required as directed by the field engineer. the box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials. 400w x 300h x 150d, supply of ac junction box of size 535x310x127mm of 18swg ms sheet including hrc fuse unit-18 nos. should be fitted with base, consumables etc. (the box shall be vermin proof, shall have sturdy hinges and locking arrangements), supply of mounting channel suitable for cbtm 5 terminal block in panel /box as required and as directed by the field engineer., supply of disconnected type terminal block suitable for ct circuits in panels/ box as required & as directed by the field engineer, supply of isi mark bakelite hrc fuse holder with fuse of 2/5/10/16 amps reputed make in panels/ boxes for ac/dc/pt circuits wherever required as directed by the field engineer. 16 amps - fuse holder with hrc fuse, 63amps - fuse holder with hrc fuse, bus & bus materials zebra acsr conductor, 2.0" / 50 mm aluminium bus bar (thickness:5 mm), 22/33 kv pt insulators, 11kv pt insulator, 11kv, 120kn disc insulators (antifog), strung bus eye bolt of 18 - 20 mm dia gi rod of required length suitable for 33kv, 22kv and 11kv strung bus including cost of gi rod and 2nos gi nuts & washer as directed by the field engineer., clamps and connectors tension fitting clamp 4 bolted for zebra, t clamp for 2" bus to single zebra, t clamp for zebra to zebra, switchend clamp for single zebra, switchend clamp for 2" busbar, reducer clamp for 2" bus to zebra, pg clamp for zebra, free end clamp for 2"busbar, corana bell for 50mm bus bar, switch end clamp for mink, seating block for 2" bus bar(for g

CTN :42901043

16 Dec, 2025 NA

Pune - Maharashtra

Tender For bid to ras bid to ras supply of augmentation of stationery and consumables store d d - modular track mounted glide access with metal cladding , laminated faced composite panel cabinet , block work storage module , aluminium framing with water proof composite finish in fluid panel , sculpted pop grid framework , fitment of flexible poly surface floor covering , fitment of contour profile illumination , in-wall fixed storage bay , recessed downcast cob fixture assembly , graphic art work surface treatment , fixture connection set with routing components , surface routing and insulation kit with accessories , protective oil based surface finish , concealed overhead air circulation 4 ton hvac module , wall rack 8ft height with full back closed 18 inch depth base and 3 inch pillar , gandola double rack , frontal end rack , wall channel rack without base wall hanging , shopping trolley 60 liters , point of issue counter 48 inch , surveillance and recording system , card tap and check out with system , visual display unit 55 inch ) /bid number: gem/2025/b/6740707 * /dated: 24-11-2025 & & / bid document1 / 23

CTN :43180507

24 Dec, 2025 NA

Bathinda - Punjab

Tender For tender for supply of mobile solar set 5 kva : :--72 cell ware solar panel 550 watt with power tolerance of 0pt5w maximum system voltage of 1500 and voltage at maximum power at 36pt70vmp the solar panel is made up of poly crystalline silicon with 72 solar cell per module that would be of 1 pt 5 mtr x 2 pt 00 mtr encapsulated with ethylene vinyl acetate make luminous waree utl , solar inverter 5 kva 120v with power conditioning unit integrate that consist of grid charger inverter and mppt solar charger the 5kva 120v solar inverter used solar and grid to charge the batteries since the usage of power from the grid is secondary grid power is only used when solar energy is not present make utl luminous , lead acid tubular batteries with the capacity of 150ah with normal voltage of 12v per battery make exide amaron utl luminous , 2 core 6 sqmm wire required to give connection from solar panels to batteries and for the electrical fitting purpose make havells anchor bajaj , rack for batteries ms iron angle frame size of 65cm x 65cm x 210cm , change over 100 amp make havells anchor bajaj , mcb 63 amp make havells anchor bajaj , trolley mobile solar set will be fixed on heavy duty steel trolley with 2 lockable wheels tyre should be size of 7 pt 50 to 16 14 ply rating and load capacity of 2 pt 50 ton trolley to have parking and over run break pulley tow hook and leaf spring four set 1 nos axles super structure of the trolley should be made of 150m x 75mm x 5mm thick u channel angle iron of size 75mm x 75mm and top platform 4mm thick ms plate necessary arrangement for fixing of 5 kva solar system with 01 nos tool box lockable battery compartment solar panel fold dimensions folded size 4 mtr l x 2 pt 10 mtr w x 0 pt 75 mtr h unfolded size 6 mtr l x 4 pt 5 mtr w mobility features four wheels with specify type pneumatic solid easy to tow or transport deployment process manual unfolding of solar panels instant electricity output from sunlight

Central Government/Public Sector

CTN :42904317

29 Dec, 2025 3.62 Crore

Bangalore - Karnataka

Tender For corrigendum : replacement of em items against ber held with ge i rnd east bangalore - supply, installation, testing & commissioning of double skin horizontal air handling unit of fully capacity, complete with double skin insulated with cfc free foam (puf) panels of 25mm thick, 42 kg/cum density. sandwitched between 0.6 mm thick g.i. sheets. outer skin shall be pre coated g.i. sheet pre coated off white. ahu frame works shall be of pre cast vertical and horizontal extruded aluminium profile with three way corner frame sections. frame construction should bear the load of structure and load of the frame structure shall be uniformly distributed along the entire housing of the ahu. food grade self adhesive coated neoprene gasket to be provided between panels and structure of the ahu to ensure the entire housing is airtight., backward curved blower to be supplied along with motor (kruger/nicotra). filter will be of 10 mic as pre filter, 3 mic as fine filter. cfm as below with 60-80mm sp complete all as specified and directed., note: rate quoted to be deemed to include civil works for hvac like breaking and opening for entry and exit of supply ducts from ahu room, exhaust ducts into shafts for exiting copper pipes / drain pipes also. fire rated material of 25mm thick phenotherm to be used near civil closures for fire resistant properties., a) 13200 cfm, 60mm static ahu capacity 33 tr., 11 tr dx outdoor ac unit complete with scroll compressors, copper tube aluminium finned air cooled condensers, propeller type condenser fans with eco friendly r410 refrigerant & powder coated outer metal body controlling a minimum capacity.note: rate quoted to be deemed to erection of condenser unit platform (ms angle frame with 02 coats of red-oxide and 01 coat of enamel black paint) with ms works for duct support., supply, installation, testing & commisisioning of nominal capacity air-cooled dx floor mounted packaged ducted units complete with scroll compressors, copper tube aluminium finned air cooled condensers, propeller type condenser fans with eco friendly r410 refrigerant & powder coated outer metal body controlling a capacity of mimimum 22 tr ducted packaged ac unit with 8800cfm complete all as specified and directed., supply, installation, testing & commisisioning of nominal capacity air-cooled dx floor mounted packaged ducted units complete with scroll compressors, copper tube aluminium finned air cooled condensers, propeller type condenser fans with eco friendly r410 refrigerant & powder coated outer metal body controlling a capacity of mimimum 11 tr ducted packaged ac unit with 4400cfm complete all as specified and directed., supply, installation, testing & commisisioning of nominal capacity air-cooled dx floor mounted packaged ducted units complete with scroll compressors, copper tube aluminium finned air cooled condensers, propeller type condenser fans with eco friendly r410 refrigerant & powder coated outer metal body controlling a capacity of mimimum 8.5 tr ducted packaged ac unit with 3500cfm complete all as specified and directed., supply, installation, testing & commissioning of air cooled ducted split air conditioners of capacity 8.5 tr with r2 series: r 407c eco friendly refrigerant, nominal cooling capacity 1,02,000 btu/hr, nominal air flow 3400 cfm, microprocessor based with lcd display controller and hermetically sealed scroll type compressor, all necessary connections with suitable size of copper cables and initial gas charging, provision of necessary pcc platform / iron angle frame for outdoor unit complete all as specified and directed by engineer-in-charge., dismantling / taking down / transporting carefully old acs outdoor & indoor unit with all connected acessories and to be deposited in mes store complete all as specified and directed., dismantling / taking down / transporting carefully old unserviceable ducting items off any size and capacity with all connected accessories and to

corporations/Associations/Others

CTN :43192432

09 Jan, 2026 4.99 Lacs

Kolkata - West Bengal

Tender For supply, delivery, fitting-fixing of transparent fibre glass arrangement at door-windows pane consist of new m.s. fabricated frame structure against filter bed no-2,4,13 and 15 with allied civil works under wtp-ii, grww.

Central Government/Public Sector

CTN :43188450

07 Jan, 2026 NA

Gandhinagar - Gujarat

Tender For supply of lifting, shifting, servicing, installation and testing of 5. 5 tr ductable air conditioning units with supply and fixing of ms fabricated stands. other details as specifies in tender specification , lifting, shifting, servicing, installation and testing of 8. 5 tr ductable air conditioning units with supply and fixing of ms fabricated stands. other details as specifies in tender specification. , supply, installation and testing of 0. 625 inch seamless soft or hard copper refrigerant piping with 19 mm thick insulation. , supply, installation and testing of 0. 875 inch seamless hard copper refrigerant piping with 19 mm thick insulation. , supply, installation and testing of 1. 125 inch seamless hard copper refrigerant piping with 19 mm thick insulation. , supply, fabrication, installation and testing of 22 or 24 swg gi sheet metal rectangular ducts as described in technical specifications. , supply and fixing of thermal insulation for sa duct by minimum 9 mm thick elastomeric nitrile rubber as described in technical specifications. , supply and fixing of acoustic insulation lining in sa duct by minimum 10 mm thick open cell structure, armasound or equivalent insulation as described in technical specifications. , supply, fixing and testing of required size flexible canvas connections constructed of fire resistant flexible double canvas sleeve. , supply and installation of supply air dampers of 400 mm x 400 mm or required size aluminium opposed blade flanged type aerofoil or airfoil design. , supply and installation of plate mounted axial fan of approx. size 400x400 and 750 cfm with static pressure more than 40 pascal single phase low noise with speed controller. , supply, installation and testing of suitable size powder coated extruded aluminium supply air grills or diffuser without volume control damper provided in supply air duct. , supply, fixing, testing and balancing of suitable size volume control damper in supply air duct cut out of size approx. 650x150 mm. , providing and fixing in position of 20 mm dia. c-pvc or u-pvc condensate pipes with 9 mm thick nitrile insulation. , supply, fabrication and fixing of ms structural steel of required size and shape with painting. , installation and testing of fim items and minor civil works as specified in tender.

State Government

CTN :42975278

29 Dec, 2025 3.00 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For corrigendum : purchase of furniture items - officer table :- providing and supplying table of size 5 x2 6 x2 6 with c-frame leg 200 mm wide made of aluminum profile and crca formed section having provision for wire management. top made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminate, wooden edge banding of edges. dotted embossed cable duct and with single drawer (w-350 mm, h-165 mm, d-475 mm) with branded telecopic channel. all steel components are epoxy powder coated after seven tanks. anti-corrosion., officer chair :- supply and placing high back revolving chair size total height 1030-1115 mm, depth 685 mm width 590 mm seat hight 425-510 mm, 5- prong nilony base for stability twin wheel heavy duty caster for easy mobility under load hot pressed plywood with steel t-nuts for rigid fasting seat and back are covered with pp cover, sturdy steel colum gas lift for center support and seat height adjustment, telescopic abs cover over steel colum low cable center tilt mechanism and with single piece integral center tilt mechanism and with single piece integral skin pu arm rest, quality tapestry high density molded pu cushion., staff chair :- supply and placing staff chair size total height 850 mm depth 570 mm, width 550 mm seat hi=eight 440 mm, uinder structure cantilever type ms crca tube 1.6 mm thick. hot pressed plywood with steel t-nuts for rigid fastening. single piece integarl skin pu arm rest. quality tapestry. high density pu molded cushion. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface., waiting chair :- supply and placing waiting three seater fixed chair, size ; total length 1800 mm, total height 750 mm, total depth 630 mm and seat height 410 mm, made of ms crca press formed seat components duly seamless welded to get proper finish chrome plated handles & base. steel perforated ms moulded one piece seat and back fitted in moulded chrome plated side strips, three individual seat fitted on ms tube support of 75 mm x 35 mm, seat and bottom support are powder coated., computer table :- supply and fixing in position computer table (work station) having size length 900 mm, width 600 mm, height 760 mm, c-frame & tubular crca steel structure, fabrication involves only mig/tig & spot welding. top & shelf made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminated, wooden edge banding of edge, shelf adjustable on steel brackets. removable tubular cpu stand and an embossed modesty panel below table top provided. provision for wire management, drum type leveler. all steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface., plastic chair:- plastic arm chair for office, godrej almira :- godrej interio almira slim size 2 door steel almira, 4 shedves, size length 1828 mm, width 914 mm, water cooler :-cooling capacity- 5 ltr./hr.number of taps- 2color- whiteweight- 10 kg., cash counter:-office reception table & cash counter desk of woodenproduct dimensionslength 48 , width 24 , height 36 approx., record rack :-material- mild steelno. of shelves- 5 shelvesmount type- finish type color- greyusage/application- officerack type- open rackappearance- modernproduct type- pre standing unitassembly required- no, bench :- product dimensions12d x 48w x 18h centimetersmaterial- stainless steekframe material- stainless steelcolour- silverstyle- antiquesize- 48"l x 12.3"w x 18"h overall size: 48"l x 12.3"w x 18"h, digital electronic safe locker for office with auto lock function, anti-theft alarm and led displays size length 500 mm width 350 mm

State Government

CTN :43158687

19 Dec, 2025 68.13 Lacs

Bengaluru - Karnataka

Tender For work of providing and construction of rcc/ssm wall flow meter chambers with fabrications of m.s. structure and other allied work at south, south east & south west zone glr premises coming under aee(ufw)-2 sub-division

Metal Cladding Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government