Latest metal frame detector Tenders | Government metal frame detector Tenders

CTN :45346428

15 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of renewable energy practical equipments - equipments for renewable energy practices:, rc phase shift oscillator oscillator type: rc phase shift oscillator using transistor / op-amp configuration. input supply: 230 v / 50 hz ac with regulated internal dc supply. output frequency range: 100 hz 10 khz adjustable. output: sinusoidal waveform with adjustable amplitude up to 10 vpp. rc network: three-stage rc phase shift network with frequency control arrangement. cro test points: dedicated cro terminals at amplifier output, each rc stage, and final output for waveform and phase-shift observation. protection: over-voltage and short-circuit protection provided. indicators and controls: power on led indication with frequency and gain adjustment controls. accessories: patch cords, circuit diagram, strain guage characteristics kitac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords, load cell characteristics kit input supply: 230 v / 50 hz ac with regulated internal dc supply. sensor: strain gauge load cell with suitable mounting arrangement. load range: 0 10 kg. display: digital display for load/output indication. cro / test points: test points provided for observing bridge output, amplifier output, and signal conditioning stages. controls: zero adjustment and calibration controls provided. protection: overload and short-circuit protection provided. accessories: loading arrangement, connecting leads., measurement of tank level using rotometer input supply: 230 v / 50 hz ac with regulated internal dc supply. tank arrangement: transparent tank with 30 liters capacity with suitable supporting stand. rotameter range: 0 4000 l/hr calibrated rotameter. flow system: pump, control valves, and piping arrangement provided for continuous flow operation. measurement facility: provision for flow-based tank level measurement and observation. display / observation: calibrated level indication with flow monitoring arrangement. test points: output terminals provided for monitoring sensor/output signals. accessories: connecting tubes., measurement of tank level using displacer type level transmitter input supply: 230 v / 50 hz ac with regulated internal dc supply unit. measurement principle: buoyancy (archimedes principle) using displacer element. tank arrangement: transparent experimental tank with 30 liters capacity and suitable mounting stand. level range: suitable laboratory-scale level measurement (0 100% tank height). sensor system: displacer type level transmitter with continuous level output signal. display unit: digital indicator for level display in percentage / engineering units. output signals: standard analog output (4 20) ma / (0 10) v provided for monitoring. test points: provided for transmitter output, signal conditioning, and display unit verification. controls: zero and span calibration adjustment provided for setting level reference. protection: over-voltage and short-circuit protection for electronic modules. accessories: connecting cables, piping arrangement, loading medium (water), measurement of temperature using pt100 input supply: 230 v / 50 hz ac with regulated internal dc power supply unit. sensor: pt100 resistance temperature detector (rtd) probe with stainless steel sheath. measurement principle: resistance variation of platinum element with temperature. temperature range: 0 c to 150 c (or suitable laboratory range). display unit: digital temperature indicator with direct c display. accuracy: high accuracy with linearized rtd signal conditioning circuit. sign

CTN :45346446

11 Jun, 2026 NA

Tuticorin - Tamil Nadu

Tender For purchase of lab equipments for res dept - purchase of lab equipments for res dept, rc phase shift oscillator (iemcode:o001)specifications: oscillator type: rc phase shift oscillator using transistor / op-amp configuration. input supply: 230 v / 50 hz ac with regulated internal dc supply. output frequency range: 100 hz 10 khz adjustable. output: sinusoidal waveform with adjustable amplitude up to 10 vpp. rc network: three-stage rc phase shift network with frequency control arrangement. cro test points: dedicated cro terminals at amplifier output, each rc stage, and final output for waveform and phase-shift observation. protection: over-voltage and short-circuit protection provided. indicators and controls: power on led indication with frequency and gain adjustment controls. accessories: patch cords, circuit diagram., strain guage characteristi cs kit(iemcode:o002)specifications: ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. no rs.10,000 2 table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords, load cell characteristi cs kit(item code: o003)specifications:input supply: 230 v / 50 hz ac with regulated internal dc supply. sensor: strain gauge load cell with suitable mounting arrangement. load range: 0 10 kg. display: digital display for load/output indication. cro / test points: test points provided for observing bridge output, amplifier output, and signal conditioning stages. controls: zero adjustment and calibration controls provided. protection: overload and short-circuit protection provided. accessories: loading arrangement, connecting leads., measurement of tank level using rotometer(item code: o004)specifications: input supply: 230 v / 50 hz ac withregulated internal dc supply. tank arrangement: transparent tank with 30 liters capacity with suitable supporting stand. rotameter range: 0 4000 l/hr calibrated rotameter. flow system: pump, control valves, and piping arrangement provided for continuous flow operation measurement facility: provision for flow-based tank level measurement and observation. display / observation: calibrated level indication with flow monitoring arrangement. test points: output terminals provided for monitoring sensor/output signals. accessories: connecting tubes., measurement of tank level using displacer type level transmitter(item code: o005)specifications: input supply: 230 v / 50 hz acwith regulated internal dcsupply unit. measurement principle:buoyancy(archimedesprinciple) using displacerelement tank arrangement: transparent experimental tank with 30 liters capacity and suitable mounting stand. level range: suitable laboratory-scale level measurement (0 100% tank height). sensor system: displacer type level transmitter with continuous level output signal. display unit: digital indicator for level display in percentage / engineering units. output signals: standard analog output (4 20) ma / (0 10) v provided for monitoring. test points: provided for transmitter output, signal conditioning, and display unit verification. controls: zero and span calibration adjustment provided for setting level reference. protection: over-voltage and short-circuit protection for electronic modules. accessories: connecting cables, piping arrangement, loading medium (water), measurement oftemperature using pt100(item code: o006a)specifications: input supply: 230 v / 50 hz ac with regulated internal dc power supply unit. sensor: pt100 resistance temperature detector (rtd) probe with stainless steel sheath measurement principle: resistance variation of platinum element with temperature. temperature range: 0 c to

Central Government And Public Sector

CTN :45034370

28 May, 2026 NA

Chittorgarh - Rajasthan

Tender For corrigendum : tender for supply of lockiconorganizationlockpinkiconsign in to unlock| send me onwhatsappmail|wishlistexport20days leftreagent kitsreagentsmicrobiology test kitsmedicinetesting equipment - phased array ultrasonic flaw detector 32-128 elements pr configuration with provision of additional 2 numbers of conventional ultrasonic channels , lithium iron battery pack rechargeable type minimum 70 wh having minimum operating time of 4 hours compatible for phased array ultrasonic flaw detector , external battery charger lithium iron battery pack compatible for phased array ultrasonic flaw detector , standard phased array probe , frequency-5.0 mhz , linear array , 64 elements , 0.5 mm pitch , total active aperture 32x10mm , 5 meter cable length , connector compatible for phased array ultrasonic flaw detector , standard phase array probe , frequency-7.5mhz , linear array , 16 elements , 0.5mm pitch , total active aperture-8mm x 10mm , 2.5 meter cable length , connector compatible to phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 55deg refracted angle in steel , shear wave , with ihc , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 60deg refracted angle in steel , shear wave , with ih. the wedge should feature curvature matching pipe od (26.67mm) axial outside diameter (aod) for circumferential weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 60deg refracted angle in steel , shear wave , with ih. the wedge should feature curvature matching pipe od (48.26mm) axial outside diameter (aod) for circumferential weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 60deg refracted angle in steel , shear wave , with ih. the wedge should feature curvature matching pipe od (73.03mm)axial outside diameter (aod) for circumferential weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 55deg refracted angle in steel , shear wave , with ihc. the wedge should feature curvature matching pipe od (88.9mm) axial outside diameter (aod) for circumferential weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 55deg refracted angle in steel , shear wave , with ihc. the wedge should feature curvature matching pipe od (168.3mm) axial outside diameter (aod) for circumferential weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 55deg refracted angle in steel , shear wave , with ihc. the wedge should feature curvature matching pipe od (219.1mm)axial outside diameter (aod) for circumferential weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 55deg refracted angle in steel , shear wave , with ihc. the wedge should feature curvature matching pipe od (273.1mm) axial outside diameter (aod) for circumferential weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 60deg refracted angle in steel , shear wave , with ih. the wedge should feature curvature matching pipe od (26.67mm) circumferential outside diameter (cod) for axial weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 60deg refracted angle in steel , shear wave , with ih. the wedge should feature curvature matching pipe od (48.26mm) circumferential outside diameter (cod) for axial weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array pr

State Government

CTN :45074861

21 May, 2026 5.00 Lacs

Multi City - Maharashtra

Tender For corrigendum : supply of t&p material for mulund division - combination plier with cutter, length 210 mm,, insulated screw driver 8mmx 200 mm, insulated screw driver 10mmx250 mm, neon tester 125mm, digital line tester, non-contact ac voltage detector tester pen 12v-1000v with led light, seamless rubber hand gloves, pair, free size test potential 30kv, working potential 26500v, seamless rubber hand gloves pair 380 mm long, test potential 25kv, working potential 17kv, lt hand gloves, class a first aid kit, tool box with tools, 20w led rechargeable torch (500mtr long beam light), ring double ended spanner set, clamp meter, meggar 5 kv, frp foldable discharge rod (ht) 22kv, frp do rod 11 kv ht, hydrometer

Central Government / Public Sector

CTN :45194816

26 May, 2026 NA

Kazipet - Telangana

Tender For supply of set of consumables mentioned in annexure-a for digital ultrasonic flaw detector make: eeci;model:digiscan ds-333. [ warranty period: 30 months after the date of delivery ] ] - normal single crystal probe 10 mm dia, 2.5 mhz. , normal single crystal probe 20 mm dia, 2.5 mhz. , normal single crystal probe 20 mm dia, 1.5 mhz. , normal single crystal probe 10 mm dia, 1.5 mhz. , perspex wedge adaptor suitable for 20 mm dia normal probe and producing angle beam of 10 degree each at 2.5 mhz with flat contact face. , perspex wedge adaptor suitable for 20 mm dia normal probe and producing angle beam of 17.5 degree each at 2.5 mhz with flat contact face. , perspex curvature wedge adaptor suitable for 20 mm dia normal probe and producing angle beam of 179.7 degree each at 2.5 mhz with flat contact face , probe cable bnc to bnc cable (2 meter long) , double crystal probe 20 mm dia, 2.5 mhz.

Central Government/Public Sector

CTN :45183348

25 May, 2026 NA

Coimbatore - Tamil Nadu

Tender For supply of smoke detector and fire alarm system conforming to rcf specification no edts-087 rev .b corrigendum-i or latest. accepted make/brand : kaamney,integ,agni electric, precision only.the smoke detector and fire alarm system should be suitable for installation in lhb power cars and include the following items:1. control unit with a working voltage of 110v dc - 1 no. 2. smoke detectors - 2 nos. 3. alarm unit - 1no. 4. e-beam multi-core/multi-color wire harness for the connections of sensors and accessories - 5 meters. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

corporations/Associations/Others

CTN :44213234

12 May, 2026 NA

Dibrugarh - Assam

Tender For bid to ras bid to ras corrigendum : supply of ultrasonic flaw detector : : - complete set of portable ultrasonic flaw detector with standard accessories , straight beam normal probes 5 mhz , angle beam probes shear wave with wedges for steel , probe cables , calibration reference blocks , couplant , battery packs rechargeable including one spare in addition to the pack inside the instrument , battery charger ac adapter 230 v 50 hz with power cord and plug , report transfer software with usb cable sd card as applicable license documentation , carrying case shock resistant padded

CTN :44631768

01 May, 2026 73.2 Thousand

Delhi - Delhi

Tender For bid to ras supply of cable of beam 5 u58 , toggle switch , crystal detector dke-2m , crystal detector dki-i , valve gsi 3 , capacitor

CTN :44764500

02 May, 2026 20.44 Crore

Jammu - Jammu And Kashmir

Tender For corrigendum : supply of supply of outdoor 5mp bullet camera for periphery monitoring , supply of 4 mp ptz camera , supply of box camera for anpr , supply of 55 lfd display unit , supply of display for 3x3 video wall , supply of workstation with intel core i511700 8 core 16gb ram 1tbhdd windows 11 pro dvdrw 8gb graphic card keyboard mouse , supply of video management recording server , supply of video management recording server failover , supply of video management software base license for servers with vms client licenses , supply of camera connection license , supply of camera connection failover license , supply of video analytic server to support 150 video analytics , supply of face recognition anpr server to support 50 fr 12 anpr , central application base software package , supply of ai based video analytics per use case license for the following use cases intrusion detection object detection crowd detection , base license supports for face recognition system , supply of fr licenses , supply of anpr licenses , supply of intergation license for rfid access control , supply of storage appliance for 30 days recording for all applications , supply of firewall , supply of anitvirus for server , supply of core switch , supply of 24 port gigabit poe access switch with 4 uplink sfp ports , supply of gigabit sfp module , supply of combined box for with mcb , supply of 12 core lc lc rack mounted liu with complete accessories , supply of 24 core lc lc rack mounted liu with complete accessories , supply of 6 core single mode armored fiber cable , supply of single mode lc lc fiber duplex patch cord , supply of cat 6 utp cable , supply of cat 6 utp patch cord length 2 meter , supply of 24 port loaded patch panel , supply of cable manager , supply of cat6 io modules , supply of 2 port faceplate with 3x3 pvc gang box , supply of rj45 connectors , supply of ) /bid number : gem/2026/b/7415052 * /dated: 06-04-2026 & & / bid document 1 / 60 & & ' ' /item category 42 u floor mount rack 800mm x 1000mm , supply of 9u indoor rack with accessories with 550 mm depth , supply of route markers , supply of 33mm id 40mm od or better hdpe pipe , supply of 50 mm or better gi pipe , supply of 25 mm pvc conduit with accessories , supply of gi wire for overhead fiber laying , supply of 4 dia 6 mtr pole with accessories civil foundation in complete for camera mounting , supply of wether proof camera connector housing box for ptz bullet camera , supply of 24 port fiber splice closure , supply of 5 mtr hdmi cable , supply of 3 core 25 sqmm power cable unarmored , supply of 15 kva or better ups with 30 mins ups back up , supply of 1 kva online ups with inbuilt batteries having 10 15 mins backup , supply of automatic rfid based boom barrier , supply of tyre killer , supply of 8 zone door frame metal detector , supply of bollard systems , supply of visitor management server , supply of visitor management software base license , supply of workstation for visitor management system , supply of video camera visitor registration , supply of visitor management software client license , supply of rfid reader , supply of long range rfid reader , supply of vehicle rfid tag , supply of rfid card , supply of access control server , supply of access control software , supply of 6kva ups with 30 mins backup at each gate , supply of customized outdoor rack for ups and battery , parimeter intrusion detection panel , supply of keypad for intrusion detection panel , supply of ip module fo intrusion detection panel , supply of zone expender , supply of sounder 110db , supply of photo electric beam sensor , supply of 12v 7ah battery for intrusion detection panel , supply of 12v 5amp power supply , supply of 8 core 05 sq mm flexible copper cable , 8 core 15 sq mm armoured copper cable for , supply of 4 dia 25 mtr pole with accessories civil foundation for beam sensor and expender , supply of icc software , installation testing commissioning of complete system and 3

Central Government/Public Sector

CTN :44959016

12 May, 2026 79.99 Lacs

Khorda - Odisha

Tender For supply of sitc of microprocessor based intelligent addressable main fire alarm control panel , sitc of repeater panel , sitc of intelligent analog addressable photo thermal detector , sitc of intelligent analog addressable photoelectric smoke detector , sitc of intelligent addressable duct detector including suitable photo detector , sitc of response indicator , sitc of fault isolator , sitc of intelligent addressable thermal detector , sitc of addressable fire control module , sitc of addressable fire relay module , sitc of addressable beam detector , sitc of manual horn cum strobe , sitc of addressable manual call point , sitc of 25 mm outer dia cpvc pipe , supplying and laying of 2x1.5 sqmm fire alarm armoured cable

Metal Frame Detector Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

Central Government / Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector