Latest metal halide fitting repair Tenders | Government metal halide fitting repair Tenders

Central Government/Public Sector

CTN :43229328

07 Jan, 2026 NA

Ambala - Haryana

Tender For electrical work in c/w upgradation of balance works in industrial siding i & ii at goods shed chandigarh, provision of 3 meter wide fob at barwala (bxc),replacement of dilapidated sub-standard quarters of block no. t-7/2 at (sangrur) sag, g.hut no. 15/7 units type-ii at lahra gaga) lha & block no. t-7/2 at (chhajli) cjl with standard type-ii quarters in section of aden/pta and replacement of staff quarters gang no. 9 between (ganl-barj) in the section of sse/w/rpar (11 nos. type-ii quarters) & provision of electric lifting barrier in lieu of left over mechanical lifting barrier,provision of road signals on interlocked l-xing gates, provision of balance work of fob at sunam railway station over ambala division, provision of high level platformno.1 & 2 at kesari railway station, construction of standard type-ii: 6 units,type-iii: 4 units and type-iv: 1 unit in lieu of sub-standard staff quarters (ty-ii: 2 units,ty-iii:3 unit & ty-iv: 1 units in section of sse/w/m/umb & ty-ii-4 units, ty-iii-1 unit of sse/w/e/umb in old rly colony under aden/umb, construction of standard type-ii: 14 units and type-iii: 1 unit in lieu of sub-standard staff quarters (type-i: 10 units, type-ii: 4 units, and type-iii: 1 unit) in old rail vihar colony, ambala cantt under aden/umb, fob at kharar railway station and provision of creation of infrastructure facilities for art & sparmv of saharnpur, bathinda & kalka and provision of rubberized level crossing road surface at level crossings (total 13 nos) and replacement of non-standard duty hut no. c-40b with replacement of worn out condition duty hut no. c-19a, c - 34, c-45,c-46 in the section of aden/pta,upgradation/modernization of goods shed,construction of 12 unit std. type-ii quarter (phase-i) in c/w construction of 172 nos. type-ii qtrs in replacement of type-i qtrs & total=172 units in old rly colony ambala cantt and balance work for the construction of driver & gaurd running room at bathinda over ambala division

Central Government/Public Sector

CTN :43229423

12 Jan, 2026 NA

Valsad - Gujarat

Tender For valsad - enhancing and improving safety by replacement of electrical infrastructure and provision of air-conditioning in critical pneumatic and electronics labs at valsad loco shed.

CTN :43229425

13 Jan, 2026 NA

Kharagpur - West Bengal

Tender For electrical work for improvement/augmentation of infrastructure at lc gates (10 nos) under aden/west/kgp.

CTN :43211457

19 Dec, 2025 38.97 Lacs

Jodhpur - Rajasthan

Tender For up-gradation & expansion of existing lan network infrastructure & electrical points at jodhpur hostel block no. 02, 04 & 14 for directorate of estate reallocation from nirman bhawan to jodhpur hostelsubwork/packages:up-gradation & expansion of existing lan network infrastructure & electrical points at jodhpur hostel block no. 02, 04 & 14 for directorate of estate reallocation from nirman bhawan to jodhpur hostel

corporations/Associations/Others

CTN :43221618

23 Dec, 2025 14.09 Lacs

Visakhapatnam - Andhra Pradesh

Tender For development of infrastructure like school building, completion of works like water pipe line and electrical works in dormitory, class rooms amd dining hall etc., to apswrs boys at sabbavaram

Corporations And Associations And Others

CTN :43222694

24 Dec, 2025 6.04 Lacs

Delhi - Delhi

Tender For improvement/development and repairing work of electrical infrastructure at puhc vivekanand puri in ward no. 71/cspz to ayushman arogya mandir.

CTN :43168513

01 Jan, 2026 34.68 Lacs

West Tripura - Tripura

Tender For supplying, installation, testing and commissioning of equipments for electrical control, analog and digital electronics and microprocessor labs at ttaadc polytechnic institute, khumulwng, west tripura for the project improvement of infrastructure i

CTN :43168515

01 Jan, 2026 43.05 Lacs

West Tripura - Tripura

Tender For supplying, installation, testing and commissioning of machines and equipment for civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura for the project improvement of infrastructure in ttaadc polytechnic institute, kh - supplying, installation, testing and commissioning of machines & equipment in civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura under the nec scheme "improvement of infrastructure in ttaadc polytechnic institute, khumulwng, west tripura, district under higher education departmen.", computerized universal testing machine, 6 pillar type, for conducting tests on various types of ferrous and non-ferrous materials; consisting of-loading unit 600 kn capacity, hydraulic jaws and pumping system, clamping jaws for round specimens, clamping jaws for flat specimens, pair of compression plates,for compression test, rollers of 160 mm width and 30 mm diameters, for transverse test, bending table stopper, allen keys, spanners,double shear test attachment, bend rebend test attachment, electronic extensometer., steel bar cutting machine, vernier caliper, stainless steel ruler, 1m length, mixer machineriesconcrete mixerthe counter balanced mixing drum is easy to tilt two cubic feet mix capacity. total drum volume is 3 cubic feet.. suitable for operation on 220 volt single phase, 50 cycle, a.c. supply, isi cube mouldcube mould, with base plate : as per is : 516 with isi mark cube mould, 15 cm x 15 cm with base plate (made of cast iron - isi mark), cement mortar cube mouldcement mortar cube mould cube mould, 7.06cm x 7.06cm with base plate (made of mild steel), vibrating machinevibration machine with timer : is : 4031 this apparatus is suitable for making cubes of 70.7 mm. for mortar strength evaluation. the mould is mounted on a vibrating platform with a frequency of 12,000 400 vibrations per minute. to the platform are attached four matched springs. the whole assembly is operated by a revolving shaft with an eccentric mechanism. the machine is supplied with a timer, a switch mounted on a steel panel and a 70.7 mm. steel cube mould with a base plate., electronic balancecapacity 500gm, 0.01 gm accuracy, electronic balancecapacity 5kg, 0.1 gm accuracy, electronic balancecapacity 20kg, 0.5 gm accuracy, electronic balancecapacity 100 kg, 10g accuracy, air permeability apparatus (blaine type)isi certification mark is;5516, fitted in aluminium box, vibrating tablevibrating table for compaction concrete cube, cylinders the table deck size 50 cm x 50 cm and has stops along its edges to prevent moulds from walking off the table during vibration the variably pitch pulley arrangement permits the frequency to be varied sleeplessly between a maximum of 3600 vibrations per minute a speed regulation handle is provided for increasing or decreasing the frequency. the vibrating deck. a switch is provided for starting the motor. operation on 440 volts, three phases, a.c. supply. table top - 50 cm x 50 cm, curing tankwater curing bath with agitation system digital indicator for temperature * 24- hour cycle from time of mixing * controlled 100 c +/- 2 c. temp. for concrete * controlled 27 c + 2 c curing temperature for grey cement the tank has been designed to accommodate 150 mm / 70.6 mm casted cubes up to 12/24 cubes and fully insulated. complete with a hinged lid, heated, thermostat and recirculation pump. provision of two removable racks allowing free circulation of water around each cube. the pump, drain valves and electrical equipment are housed in a compartment located at one end of the tanks. the tank is heated by an immersion heater under normal conditions and refrigeration system for grey cement, the temperature is controlled at 35deg.c. +/- 2 deg.c, for about 15 minutes after immersion of the freshly-made specimens. curing tank for 12 moulds of 150mm/24 moulds of 7.06mm, vicat apparatus boxwith isi certification mark, is:5513, fitted in aluminium, le-chatelier mouldwith

Corporations And Associations And Others

CTN :43215344

09 Jan, 2026 12.38 Lacs

Cooch Behar - West Bengal

Tender For major repairing renovation and up gradation of electrical infrastructure at nbstc suri depot birbhum

Central Government / Public Sector

CTN :43211605

09 Jan, 2026 NA

Secunderabad - Telangana

Tender For secunderabad electrical maintenance department - (i) snf freight depot - augmentation/ upgradation of freight wagon maintenance infrastructural facilities (ii) hyderabad - creation of additional trip inspection facilities for electric locomotives at ts/hyb. (iii) kzj freight depot: augmentation/ upgradation of freight wagon maintenance infrastructural facilities. (iv) dls-kazipet - augmentation of facilities in diesel sheds for homing of electric locomotives at diesel loco shed, kazipet. (v) dsl/kzj - renovation of depot stores and construction of new office building at diesel stores. (vi) development and upgrading of infrastructure facility in the existing ktps siding and manning of 4 nos unmanned lcs near gagulagudem) paloncha - electrical arrangements

Metal Halide Fitting Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Corporations And Associations And Others

Corporations And Associations And Others

Central Government / Public Sector