Latest metal halide light Tenders | Government metal halide light Tenders

CTN :40289846

02 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras purchase of spares - nut (a1-1-15) , nut m18 plain(jcb super plate xxx i ac) , bolt m18x90(jcb super xxx i ac) , joint water outlet (44tc plate-w) , radiator bottom hose(jcb super xxvii b-17) , de spanner 27x32(jcb super, plate- v11 d) , strut gas door(plate-iv j-1) , tail lamp left side(item no-906) , door seal right hand (jcb super page 95) , fuel pipe fuel filter to fuel pump(ms-174) , fuel pipe feed pump to fuel filter(ms-175) , arm wiper blade assy(item no- 957) , handle door right handle(plate-iv o-9) , hose assy suction(item no - 1202) , light hand lamp 12v , element fuel sediment filter(u v-2162) , bulk head hose(plate-xiii j-2) , secondary element(ispl sl-1904) , gasket for cyl head thickness 1.25(ms-156) , motor wiper linkage assy(plate-1x g-1) , injector assy(vs turbocharged engine)(ms -171) , hose 3 by 4 inch bsp usp 2150mm(plate-xxxi aa-15) , set piston ring 0.50 o s , header for cooler and filter( ms-177) , silencer exhaust box 240x150mm(p-627) , tool pyramide (plate- xxxi aa-21) , tools kit (set of 41items) , bonded washer seal, 1 by 2 inch bsp , bolt plough 3 by 4 inch unf x 23 by 4 inch bs311 type-9(sl-60) , cab base mounting , repair kit , oil seal(ms-183) , pin pivot( ms sl no-4) , hose 1 by 4 inch x 1 by 4 inch bspx520 long , bearing linner( ms-20) , filter engine oil , element suction(jcb 3dx plate b1-2-1 sl no 4) , wiper arm(ms-80) , lock handle with key(ms sl-51) , seal kit (ispl sl no 1513) , filter element , gaiter gear lever , light rear combination lh tail lamp lh (c1-3-11) , element fuel filter 30micron(sl no-xxx c-8) , leaver tipping (plate-vi t-1) , brake piston , seal rear( ms sl no-131e) , bush , plate pressure clutch 6.0mm (ms sl no-212) , seal , kit spider 106.4x43.9 dia(plate-f3-1-1) , rod seal , seal(ms sl-33) , brush carrier assy(ms-192) , v-belt (b-57) , throttle lever & control assy(jcb ispl sl no 806) , seal kit(ms-126) , lead bty positive ( ms sl no- 65) , seal shaft(ms sl no-131g) , brake shoe(ms-187) , thermosted abi(item no-2491) , bearing (h1-1-1 by 13) , filter assy , pressure hose(escou) , fuel maint filter 5 micron jcb 3dx super) , injector(item no-2526) , plate brake counter(ms sl no-144a) , tool kit standard(jcb super) item32 nos qty34 nos , unloader valve with inflator (ispl-97) , kit spider(jcb f1-6-10) , filter fuel assy.(item no-2132) , grease bucket pump , propshaft (p92)(price list-51883) , valve solenoid assembly(ctlg 3dx f5-1-1) , king post carriage(item no-647) , boom assy (jcb 3dx u v) plate b4-4-1 , drive head (item no-1536) , axle steer drive(item no-1521) , decal panel , dowel , spring(ms sl-64) , bolt banjo , rubber hose(plate-l1-4-10) , brush spring(ms-191) , seal,filter cap ( plate no- b1-3-2, sl no- 6a) , horn 12v (plate-c1-12-2) , bty cover (ms-67, jcb u v) , sealing ring ce(ms-190) , relay f r (ms sl-140) , cleaner active wiper(iv r-12,383) , adhesive(iv,r-10) , rh handle , jug oil 200cc , fan belt xpa1280(ispl 4r1040t sl-1 p-79) , oil seal hsg (plate-2h096) , feed pump (side opening)(ms -170) , cable assy throttle controll(ms-96(a)) , water pump assy , pump oil (f5-1-1 e jcb) , roof moulding(plate-iv e-1) , set piston ring 0.75 o s , fuel injection pump vs mico(ms-169) , alternator 12v 65amp(ms-197) , pump hydraulic(jcb super) , radiator aluminium (plate-xxxiii) , backhoe bucket 21 inch wide (ispl plate-k04) , clutch assy , rear axle assy 30 kph , seal kit(ms sl-62) , ignition switch (ispl escou sl no 637) , pressure plate(ms sl-429) , hose suction main hydraulic pump(e2-1-1) , hose , hose 1 by 2 inch x 1 by 2 inch bspx660mm long str , hose(plate-e1-2-1 by 13) , thermostat element(ms-164) , solenoid switch(ms-181) , pivot pin alloy steel(ms sl-18) , fuel filter , lead bty negative (jcb 3dx (u v) ms ser no 66) , rocker arm adjusting screw(ms sl-539) , link track rod (plate-f1-3010) , engine fan-21(jcb super) , alternator(item no-75) , grease bucket pump , kit seal main hyd pump(plate-e2-2-1) , drive assy(4r1040t starter page 70) , armature assy

CTN :40542830

09 Jun, 2025 4.97 Lacs

Khorda - Odisha

Tender For provision of post-top lamp around the crematorium in ward no. 60

CTN :40252519

31 May, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras purchase of spares - std self lock nut m10 , o ring , screw(r2) , gasket( plate no- c1-16-1 , sl no-3) , o ring 15.2idx5.30 cross dia , bypass seal (ispl sl no -1206) , gasket for exhaust manifold(plate-4h1176) , bush (item no-309) , bolt m10x80(plate-iii g-3) , hose clip(ms sl-193) , back nut , reflector reflex white(plate iv r-13) , spring extension (plate xxv a) , dowty seal , bolt(ispl sl-502) , buffer , mounting rear road light l s(plate viii h) , bolt m10x50 (plate xxxi p) , mounting rear road light r s(plate viii h) , lock washer (plate xxxi r) , spacer(item no-562) , bolt , strap , lock cover door lh (plate iv n) , relay charge over , cable inner(plate xi-b3) , dump switch(plate-x h-2) , radiator top hose(plate-xxviii b-14) , half clamp(ispl plate-d04) , hinge door (item no-305) , working light switch front , joint , tail lamp right side(item no-907) , glass right side quarter light(sl-378) , glass left side quarter light , seal window left hand side (plate iv p) , ignition switch , pipe fuel , door seal left hand (item no-323) , door tinted glass lower , door tinted glass lower(sl no-322) , hose (plate-xiii n-1) , mounting resilient (item no-114) , hose st pump (item no-1212) , latch assy inner rh(item no-341) , glass tinted right (plate-iv r) , door tinned glass upper(item no-321) , door tinned glass upper(item no- 338) , window tinted glass left hand side(super plate pla , hose 5 by 8 feet bsp (plate-xiii t) , rear window tinted glass (jcb super page-107) , canvas cover(ispl sl-561) , window frame left hand slide (item no-354) , door painted & sealed left hand(item no-320) , link tipping (item no-747) , windscreen front (jcb 3dx super) , liner roof assy (plate iv f) , oil pan assy twin skin (p-801) , valve main relief 227 bar (plate-xv-b) , door right side(item no-337) , valve 3rd section (plate-xv-b) , valve 1st section (plate-xv-b) , operator seat(p-109) , valve inlet (plate-xv-b) , cooler trans hydraulic oil (plate-xxviii b) , bucket 400mm (plate xxxi e) , evb super manual hydro control(11 items) , cylinder dipper (sl no-404) , bucket excavator 0.26 (plate ii-1) , plug(plate-xxxi aa-27) , cap(plate-xxxi aa-28) , valve c w adapter(plate-xxxi aa-24) , coupling(plate-xxxi aa-26) , frame outer rear window(jcb super p-105) , nut gr 1.3 by 4 inch unf (price list) , oil filter transmission(ispl sl-1504) , transfer filter , super filter drain , internal puller , ring scaling (jcb ms sl no 580) , grab sleeve , grab sleev , grab sleeve , grab sleeve , grille front(plate-iii q-1) , thrurst ring , back up tool , assembly jig , belt wrench , lift arm(plate- v a-7) , bucket tapered(plate-xxxi v-1) , washer large , bulb instrument , washer (jcb super plate xxxix c) , clip , nut(b4-4-1) , nut lock 3 by 8 unf (plate i) , screw hex 3 by 8 inch (plate-xxib) , fuse 3 amp(jcb super ix e-10) , strap check (plate iv n) , screw hex head , bolt(a1-7-4) , nut (plate xx e) , whasier 13.2 by 13.0id x 41.2 by 41.0od x 2.9 thk , 7.5 amp fuse (plate ix e) , bolt 3 by 8 unf x 3 (jcb super page xxxix sl no-245) , bolt gr-5 , 1 by 2 inch unf x 3 by 4 inch long , nut , sterring nut , set screw m10x30(plate iv v) , banjo bolt with strainer , clamp , back nut(e1-8-11 by 3) , washer hardened m10 (plate iv v) , plate clamp(e1-4-1 by 5) , nipple , bolt m10x70(plate xiii r) , bolt m 12x100mm , o-ring , clamp mid (plate xxxi g) , link 1.25 ton (plate xxxi y) , clamp , lock cover lh , shim , cap , pedal pad , nut 1-1 by 2 inch unf x 27.5 thk , knob with switch (plate xg) , o ring , switch pannel hazared , screw driver 150mm , mounting cab lower red b-post(plate-iv) , socket 3 by 4 inch a oblique f(plate-vii d-30) , micro relay change over 12v , fuel pipe (feed pump to filter) , fuel tank cap (plate iii c) , stud pre cleaner (plate-xxvi b) , joint , liner to head , 0.8mm thk , lock nut , washer , adopter 90 deg elbow (plate-xiii y-3) , stainer fuel filter (plate iii c) , mounting cab upper green b-post(plate-iv-b) , pivot pin , fuel pipe , s

CTN :40506950

18 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - counter plate(f5-3-40) , rear valance (plate iv ai) , cover steer column (plate x a) , filter fuel tank (plate iii c) , liner bearing(b4-3-2 by 03) , seal window rh side (plate iv q) , mat rubber (plate viii e) , horn 12v (plate xxiv b) , adaptor elbow (plate xiv d) , pipe brake rightside 80d (plate xxiii c) , base pre cleaner (plate-xxvi b) , adaptor tee (plate xiv b) , pump seal kit (plate xiv b) , pivot block (plate iv u) , gaiter park brake lever (plate iv a) , mounting cab upper blue a post(plate- iv b) , mounting cab upper green b-post(plate-iv-b) , seal fuse box cover (plate iv ae) , pin slew lock (plate vi a) , bracket mounting fire extinguisher (plate vii e) , switch 12 v (plate ix a) , lever loader control assy (plate x b) , lever loader control 3 spoon , spring (plate xi a) , hose top l h by r h hydra (jcb super plate xiii , hose high pressure (plate xiii ab) , setscrew (plate xvi g) , breather (jcb super plate xix f) , bearing(plate-f5-1-20 by 32) , gasket valve block (ctlg 3dx f5-5-10) , brg needle thrust(plate-f5-1-30 by 9) , pipe brake leftside 80d (plate xxiii c) , bearing liner (plate xxxi l) , lever , bottom gear shift , bearing , radio antenna (plate iv f) , guard hose (plate iii d) , hose hybrid rh outer (plate iii f) , hose hybrid lh outer (plate iii f) , speaker (plate iv f) , retainer top (plate iv am) , retainer side (plate iv am) , switch hand break by brake lamp switch open(c1-16-1) , lever excavator control left hand x pattern , loader excavator control right hand x pattern , adapter filtered m oblique m (plate xv d) , setscrew (plate xvi n) , bolt 1 inch unf x 8 inch long torque 607n-m (jcb super pla , plate brake friction (plate xix c) , ring backup (jcb super plate xix d) , seal astics male assy , brake hose 1 by 4 x 580m (plate xxiii c) , fuel line tank to water separator(plate xxx a) , ball bearing , hose hybrid rh inner (plate iii f) , clamping ring (plate iv y) , cover inner fender rh (plate iv z) , bearing trunnion ram pivot (plate vi y) , pin spring 8 mm clevis (plate x b) , adaptor suction (plate xiv b) , combi seal , disc spring , clip hose (plate xxviii b) , valve non return assy (plate xxx a) , pivot pin , mounting cab lower red b-post(plate-iv) , grommet 22.2mm hole dia by 39.7mm 00 , pivot pin , hose wa feed pipe (jcb super plate xiii d) , adaptor , seal(plate-f1-6-10) , ring backup (jcb super plate xix d) , bearing , pin pivot 44.45 by 44.35x184(plate xxxi f) , hose bsp hp 650mm (jcb super plate xiii o) , hose 1 by 4 bsp 1270mm (plate xiii y) , hose lp 2400 mm (plate xxviii d) , reservoir brake (plate xxiii a) , catch side window lockback (jcb 3dx super page-89) , liner brg 70 mmx60mmx62mm long , pivot pin (ispl sl no 501) , filter breather cap(jcb super iii d-2) , switch panel (plate ix a) , retainer hose (plate iii aa) , cover excavator control lever (plate iv y) , bulk head seal (plate iv am) , lock boom (plate vi v) , brake hose 1 by 4x 760m (plate xxiii c) , lock grille (plate iii q) , pin pivot back(item no-621) , spool adapter solenoid (plate xxi c) , shaft selector (plate xxi c) , brg needle roller , bracket (plate xxx a) , hose 1300 mm (plate xxx b) , plate shim , clutch 1.2mm a by r (jcb super plate xx , sensor vacuum 80m bar (plate xxiv b) , pin pivot union(sl-2240) , side cutter(ms sl-21) , side cutter (plate xxxi v) , bracket engine mounting lh (plate iii n) , gas strut , 700m (plate iii b) , pin pivot (plate iii g) , hose 600 mm (plate xiv d) , pivot pin , hose 06 bsp lp 105 (plate iv a) , pin pivot (plate v j) , switch panel (plate ix a) , panel 12v 2 position (plate ix b) , hose(plate-e1-13-1) , gear planet , brake plate coupling , bearing tapper roller(f5-1-20) , bearing tapper roller(f5-1-20) , pipe pre cleaner (plate xxvi a) , hose (plate xxvi a) , harness grid heater (plate xxvii a) , hose water separator (plate xxx a) , pin pivot (plate xxxi b) , piston oil , console front (plate iv aa) , bearing 50.94x55.9x40 long (plate v i) , bearing tapper

CTN :40513009

06 Jun, 2025 15.00 Lacs

Jodhpur - Rajasthan

Tender For supply of lab equipment - lab equipment, microscope with camera : should have observation method including brightfield and darkfield, should be illuminated with transmitted illuminator and led lamp, should have stage focusing mechanism with coarse handle stroke of 15 mm, should have features for coarse adjustment limit stopper and torque adjustment for coarse adjustment knob, should have field trinocular diaphragm, should have revolving nosepiece with manual with 4 standard positions , should have manual stages with right-hand control having built-in x: 76 mm, y: 30 mm, should have built in manual abbe condenser na 1.25/ w.d. - (4x 100x), standard (fn20) observation tubes-trinocular should be included, should have 30 tube inclination angle or equivalent, trinocular tube light path selection (camera: observation) :0%:100%, 100%:0%, should have interpupillary distance adjustment: 48 75 mm, dimensions (w d h): trinocular: 198 (w) x 398 (d) x 430 (h) mm, weight should be not more than weight: approx. 6.5 kg, compact design, should be supplied with 15 mega pixel or more camera attachment and computer to visualize sample, should be supplied with dust cover complete set. with c-mount stand, camera, computer, should have microscope camera software and image processing system, computer system should contain desktop (minimum 12th gen intel core i3, ram minimum 8gb, windows 11, ms office 2021, wi fi 6, bluetooth 5.2 monitor minimum 18 inch and above, fhd, ips display, eye comfort), keyboard and mouse for operating microscope, service and operation manuals to be provided; warranted for 1 years or more after satisfactory installation., magnification lens with light: magnifier is made of high quality glass. white energy-efficient led bulbs. the glass lens magnification 3x to 45x magnification. the large lens diameter 87 mm handle length 4.1 inch, digital weighing scale: electronic balance should have the following functionality, upto 220 g capacity; 0.001 g readability; brilliant display; internal calibration; robust construction; easy levelling; maximum capacity: 220 g, minimum load: 10mg, readability: 0.1 mg or better, settling time: 6 s or better, adjustment: internal, display: backlit lcd, weighing pan size: upto 90 mm , micro processed based digital display with on/off mode, build with die-cast aluminium material, should have adjustable feet for uniform levelling. should be iso, ce certifiedshould provide user, technical manuals to be supplied in english language, it should have interface rs232, service and operation manuals to be provided; power supply: ac 230v/115v,50/60hz, warranty -1year or more, authorization letter, hot air oven : double walled unit with inner chamber of stainless steel, outer chamber of mild steel duly powder coated. temperature thermostatically controlled range: 50 c to 200 c 1 c. beaded heating elements are placed in the ribs at the bottom and sides mineral /glasswool insulation, capacity: 200ltr or more, corrosion resistant body for longer life, air circulation fan for better heat circulation and dry of sample, complete with l shape thermometer, two indicators, thermostat and on / off switch, microprocessor based pid temp. controller cum indicator, adjustable selves: 2 or more, inner dimensions: 600 x 600 x 600mm or more, it should have concealed ss handle and positive latch system. controller should be equipped with timer, auto tuning and alarms. supply voltage: 230 v ac, 50 hz, single phase. should have local service setup for prompt and efficient post-sales support. warranty 1 year or more, muffle furnace: unit should be suitable for laboratory, it should be fitted with good quality tiles set, with ceramic fibred insulation. unit capacity: 4 litre or more, outer casing of thick mild steel duly painted / powder coated. working temperature ranges from 50 c - 1150 c is controlled by digital temperature cum indicator with e. r. control device for fine control. dimension should be compact: 125 x 125 x 250 mm, u

Corporations / Associations / Others

CTN :40468348

13 Jun, 2025 24.95 Lacs

Chennai - Tamil Nadu

Tender For el.d.c.no.south/1702/2025 supply and erection of 48 nos of 7 mtr street lamp post with led fittings at sapthagiri nagar school street extension saara garden govindaraj nagar 2nd street extension in division 151 and 153 zone 11

Corporations / Associations / Others

CTN :40494726

13 Jun, 2025 8.83 Lacs

Chennai - Tamil Nadu

Tender For el.d.c.no.centre/1934/2025/ supply and erection of 10 nos of 9.5 mtr lamp post with led fittings at mandapam road play ground in div 101, zone 8

Corporations / Associations / Others

CTN :40494769

13 Jun, 2025 11.64 Lacs

Chennai - Tamil Nadu

Tender For el.d.c.no.centre/1935/2025/ supply and erection 26 nos 7 mtr street light lamp post with led fittings at r.v nagar and various locations in div 101, zone 8