Latest metal pillar Tenders | Government metal pillar Tenders

Central Government/Public Sector

CTN :45725814

13 Jul, 2026 NA

Erode - Tamil Nadu

Tender For supply of heavy duty polyester multi leg webbing sling (04- legs) of capacity 04 tons. each leg 01 ton x 2.5meters length connected to the master ring as top and each sling connected to safety eye hook of alloy steel grade 80 at bottom. note: item to be supplied along with government approved competent person test certificate for each sling. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45727605

28 Jul, 2026 NA

Bangalore - Karnataka

Tender For heavy duty circular magnet with following specification 1. application- circular lifting magnet suitable for lifting cold as well as hot ferrous material up to 600?c in a foundry environment 2. operating voltage-220vdc 3. cold current- max.105 amps 4. cold power- min. 18.5 kw 5. self weight- total self-weight of the magnet shall not exceed 5 tons, inclusive of suspension chain, master bail, lugs, pins, and all other accessories 6. duty cycle- min 50% at a 10-minute cycle 7. magnet diameter- 1650 mm with tolerance of -25.5 mm/+50 mm 8. minimum lifting capacities- the lifting capacities of the magnet shall not be less than the following: a) pig iron (1 hm)-2359 kg, b) pig iron (2 broken)-1225 to 1497 kg, c) steel turnings-771 kg 9. magnet conductor & insulation- magnet conductor shall be made of premium electrical-grade copper, minimum copper purity shall be 99.99%, coil insulation shall be class "h" 10. magnet body construction- the magnet shall be made of high-grade cast steel, of welded construction, and shall be waterproof and mechanically robust, suitable for heavy-duty foundry applications 11. bottom plate & sealing plate- a)heavy duty non-magnetic bottom plate and sealing plate shall be provided,b) material shall be wear-resistant, work-hardened manganese steel, c)plates shall protect the coil from damage due to impact, abrasion, and bumping 12. suspension chain assembly- a)heavy duty, annealed alloy steel, 3-legged chain shall be provided, b)chain shall be complete with a master bail suitable for crane hook suspension. heavy-duty lugs & pins shall be provided toconnect the chain to the magnet 14. surge protection? a suitably rated surge suppressor shall in the magnet circuit 15. testing & test certificates? all relevant tests and test certificates shall be submitted along with the supply. specn: 1. cold current: max 105amps, 2. cold power: 18.5 kw 3. self weight less than 5ton inclusive of chain, bail and other accessories. duty cycle: min. 50% at 10minutes cycle 5. diameter of magnet: 66inches -1 inch +3inch. 6. lifting capacities shall not be less than (a) pig iron1hm - 2359kgs) (b) 2 broken pieces: 1225 (c) steel turnings: 771kg ]

Central Government And Public Sector

CTN :45704791

23 Jul, 2026 NA

Angul - Odisha

Tender For supply of iron master alloy tablet

CTN :45657006

03 Jul, 2026 NA

Kolkata - West Bengal

Tender For supply of brush lathe 7point6 cm rows stiff converging with wooden hub , cobalt chromium metal for cast partial denture , investment powder for cobalt cromium , crown and bridge investment graphite free for np alloy powder 40 pkts of 160 to 180 gm each and liquid of 1ltr , crown and bridge ceramic separeting liquid bott of 500 to 1000 ml , crown and bridge spacer die 20 to 30 ml bott with thinner , pumice powder superfine bag of 1 kg , teeth acrylic cross linked set of 28 complete comprising one set each of upper and lower anterior teeth and posterior teeth , teeth anterior acrylic cross linked lower set of 6 , teeth anterior acrylic cross linked upper set of 6 , teeth posterior cross linked acrylic set of 16 upper and lower , wax blue for inlay pkt of 70 gm , wheel lathe white acrylic round edge coarse 76point2 x 6point3 mm , bis acrylic resin based provisional kit for temporary crown work , wheel cloth buff large for polishing acrylic denture , sprue wax in assorted size in mm pkt of 220 to 250g , solder flux tin of 10 gms , rubber base impression material , elastomeric impression material light body pkt of 2 x 50 ml cartridge , nova bone putty 0point5 cc syringe form , comp comp acrylic teeth set set of 28 a1 shade , comp comp acrylic teeth set set of 28 a2 shade , comp comp acrylic teeth set set of 28 a3 shade , comp comp acrylic teeth set set of 28 a3point5 shade , comp comp acrylic teeth set set of 28 b2 shade , partial partial acrylic teeth set lower set of 8 a3 shade , teeth set acryrock anterior set of 6 upper shade b2 , partial partial acrylic teeth set lower set of 8 c1 shade , partial partial acrylic teeth set upper set of 8 a2 shade , partial partial acrylic teeth set lower set of 8 a2 shade , partial partial acrylic teeth set lower set of 6 a3 shade , high impact denture base material lucitone , all ceramic ingots e-max press cream mo 3 , hi quality precession finish special lead free conical metal screw posts with keys pkt of 120 , vita vmk master dentin a2 bott of 50 gm , gingifast elastic pkt of 2x tubes pluse 10ml separating liquid with tips , para core dual curing core and resin cement , 21 gauge ss wire0point5 ounce , diamond disc for ceramic works , ceramic build-up brush size 2 , ceramic build up brush size 4 , ceramic build-up brush size 6 , die spacer bott of 25 ml , light cure acrylic sheet pkt of 50 , all ceramic investment powder , all ceramic investment liquid , vita opaque powder a3 shade pkt of 50 , vita opaque liquid 250 ml , flexi denture cartridge small midium and large , tooth coloured powder a1 a2 a3 a3point5 b1 b2 shade bott of 55 gm , carbide cutter for metal set of 6 302302 302801 303001 304602 406302 509001 , flexi denture grinding and polishing kit , zilmaster finishing and polishing kit hp set of 12 , ceramic repair kit , zirconia polishing compound , nickel chromium metal white chromium alloy //bid details 2 / 46

Corporations And Associations And Others

CTN :45651274

29 Jun, 2026 1.99 Lacs

Delhi - Delhi

Tender For procurement t and p items for ward no. 151 (munirka) south zone - supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16" pole type: light weight telescopic tubular aluminum alloy extendable pole no of positions for pole height adjustment: 10 positions locking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cuttingcapacity: 200mm max, petrol operated brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cuttingattachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight(dry, without cutting attachment & deflector): should not be more than 7.5 kg clutch: centrifugal type, clutch shoe support base & lining metal only. multi function handle: should have acceleration, on/off switch at right handle. brushcutter harness: should be double shoulder harness only. anti vibration system: must have 4- point aniti vibration system. vibration level in m/s2 at right handle: should not be more than 2.5 m/s2 sound pressure level db(a): should not be more than 105 db(a) drive shaft design: must have drive shaft ends square design type only.certification: must have valid en certification, telescopic petrol operatedpole prunerengine: single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 ccpower output: should be minimum 1.2 hpweight (dry without cutting attachment & fuel): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capacity (ml): must have minimum 200 ml.clutch: clutch shoe linining should be metal only.guide bar length: minimum 30cmguide bar and chain: should have same manufacture onlychain type: every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max. output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain (cm): should be minimum 220 cm - compressed & total length of equipment -minimum 350 cm - extended.sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle extended position: should not be more than 5.5 m/s2certification: must have tuv certification with test standard en iso 11680, petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be more than 5.0 kgclutch: clutch shoe linining metal only.guide bar design: should be rollomatic type.guide bar length: guide bar length must have 50 cm/20" inch.guide bar and chain: should have same manufacture only.chain type: every drive link require groove & small oil receiver hole for better lubrication. 0.325 inch pitch & 1.6 mm thickness only. chain lubrication system: fully automatic speed controlled rotary oil pumpchain oil tank capacity: should be minimum 200 ml.oil pump drive: should have direct drive from crankshaft & oil pump flow adjustable.master lever control: must have all operation in one hand, chock, throttle, acceleration, switch off.guaranteed sound power level: should not be more than115 db(a). maximum chain velocity to iso 11681: should be minimum 28 m/s. certification: product should have valid dplf certificate with test standard en iso 11681, supply pvc pipe 1" dia made up of 1st grade

Corporations And Associations And Others

CTN :45651270

29 Jun, 2026 1.99 Lacs

Delhi - Delhi

Tender For supply of t and p items for ward no. 155 (mehrauli) south zone - supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16" pole type: light weight telescopic tubular aluminum alloy extendable pole no of positions for pole height adjustment: 10 positions locking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cuttingcapacity: 200mm max, petrol operated brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cuttingattachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight(dry, without cutting attachment & deflector): should not be more than 7.5 kg clutch: centrifugal type, clutch shoe support base & lining metal only. multi function handle: should have acceleration, on/off switch at right handle. brushcutter harness: should be double shoulder harness only. anti vibration system: must have 4- point aniti vibration system. vibration level in m/s2 at right handle: should not be more than 2.5 m/s2 sound pressure level db(a): should not be more than 105 db(a) drive shaft design: must have drive shaft ends square design type only.certification: must have valid en certification, petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be more than 5.0 kgclutch: clutch shoe linining metal only.guide bar design: should be rollomatic type.guide bar length: guide bar length must have 50 cm/20" inch.guide bar and chain: should have same manufacture only.chain type: every drive link require groove & small oil receiver hole for better lubrication. 0.325 inch pitch & 1.6 mm thickness only. chain lubrication system: fully automatic speed controlled rotary oil pumpchain oil tank capacity: should be minimum 200 ml.oil pump drive: should have direct drive from crankshaft & oil pump flow adjustable.master lever control: must have all operation in one hand, chock, throttle, acceleration, switch off.guaranteed sound power level: should not be more than115 db(a). maximum chain velocity to iso 11681: should be minimum 28 m/s. certification: product should have valid dplf certificate with test standard en iso 11681, supply of lawn mower:-specification:- type of machine walk behind lawn mowers power sourcepetrol engine engine displacement 224ccstart type recoil / pull start, speed control variable speeddrive type all wheel drivel blade style rotary typeblade engagement electromagnetic, cut width (mm) 525 to 549, minimum cut height 20 millimetermaximum cut height 80 millimeter, blades hardened steelnumber of blades 1, number of positions for cut height adjustment 6, number of levers for cut heightadjustment: single lever, number of wheels 4front wheel size 203 millimeter, rear wheel size 250 millimeter, wheel tyres pneumaticif yes, grass catcher / collector / bag volume 70 liter, "engine power rating (watt)" 4000 to 4999, engine fuel tank capacity 1.4 ltr., supply pvc pipe 1" dia made up of 1st grade pvcspecification:- braiding with material of braiding: polyesterinner diameter(id) (mm) 25 length of pipe in a coil (in mtr.):30 wall thickness(in mm):3 color: transparent, bamboo broom with wooden handle and iron ring, supply of hessian cloth as per officer in charge

Corporations And Associations And Others

CTN :45651272

29 Jun, 2026 1.99 Lacs

Delhi - Delhi

Tender For supply of t and p items for ward no. 156 (vasant kunj) south zone - supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16" pole type: light weight telescopic tubular aluminum alloy extendable pole no of positions for pole height adjustment: 10 positions locking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cutting, capacity: 200mm max, supply of lawn mower:-specification:- type of machine walk behind lawn mowers power sourcepetrol engine engine displacement 224ccstart type recoil / pull start, speed control variable speeddrive type all wheel drivel blade style rotary typeblade engagement electromagnetic, cut width (mm) 525 to 549, minimum cut height 20 millimetermaximum cut height 80 millimeter, blades hardened steelnumber of blades 1, number of positions for cut height adjustment 6, number of levers for cut heightadjustment: single lever, number of wheels 4front wheel size 203 millimeter, rear wheel size 250 millimeter, wheel tyres pneumaticif yes, grass catcher / collector / bag volume 70 liter, "engine power rating (watt)" 4000 to 4999, engine fuel tank capacity 1.4 ltr., petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be more than 5.0 kgclutch: clutch shoe linining metal only.guide bar design: should be rollomatic type.guide bar length: guide bar length must have 50 cm/20" inch.guide bar and chain: should have same manufacture only.chain type: every drive link require groove & small oil receiver hole for better lubrication. 0.325 inch pitch & 1.6 mm thickness only. chain lubrication system: fully automatic speed controlled rotary oil pumpchain oil tank capacity: should be minimum 200 ml.oil pump drive: should have direct drive from crankshaft & oil pump flow adjustable.master lever control: must have all operation in one hand, chock, throttle, acceleration, switch off.guaranteed sound power level: should not be more than115 db(a). maximum chain velocity to iso 11681: should be minimum 28 m/s. certification: product should have valid dplf certificate with test standard en iso 11681, supply pvc pipe 1" dia made up of 1st grade pvcspecification:- braiding with material of braiding: polyesterinner diameter(id) (mm) 25 length of pipe in a coil (in mtr.):30 wall thickness(in mm):3 color: transparent, bamboo broom with wooden handle and iron ring, supply of hessian cloth as per officer in charge