Latest metal product Tenders | Government metal product Tenders

State Government

CTN :40279010

16 Jun, 2025 193

Bengaluru - Karnataka

Tender For e- tender for supply of spine, fms other implants high end - frame plate 3d (micro plates 0.2mm - 0.8mm), dermal matrix wound dressings size 10x25cm, dermal matrix wound dressings size 10x12.5 cm, dermal matrix wound dressings size 5x5 cm, jess fixators for hand fracture, suture anchors (for tendon achilles repair), rack for 8 instruments with clamp box, instrument case 130 x 230 x 25mm, micro scissors straight scissor blade 10mm, forceps with plateau tip 0.3mm smooth, micro forceps with plateau tip 0.6mm angulated, micro scissors curved - scissor blade 10mm, double clamps 24mm, 1.5 - 2.3mm vessel, double clamps 16mm, 1.0 - 2mm vessel, double clamps -11mm, 06-1.4mm vessel, single clamps 24mm, 0.6 - 1.4mm vessel, single clamps 16mm, 0.6 - 1.4mm vessel, microvascular single clamps 11mm, 0.6 - 1.4mm vessel, calcaneal fracture fixation plate and screws, lisfranc plate and screws, first 1st mtp fusion plate and screws, lapidus fusion plate and screws, mini tight rope for mallux valgus, ankle fusion plates, fibre wires, achilles tendon repair by speed bridge, foot plates, memory staples, tenodesis screws, syndesmosis repair with tight rope, suture anchors for brostrum repair, internal brace for brostrum repair, deltoid ligament repair using suture anchors, deltoid ligament repair with internal brace, autocart - all autologous cartilage regeneration, suture anchors for achilles tendon 5.5 mm double loaded with needles, extra osseous talotarsal stabilization (eotts) implant (sinus tarsi screw), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (large 2mm to 2.8mm), a)10 hole continuous plate (large 2mm to 2.8mm), a)6 hole with gap (large 2mm to 2.8mm), a)4 hole with gap (large 2mm to 2.8mm), a)3 hole with gap (large 2mm to 2.8mm), a)2 hole with gap (large 2mm to 2.8mm), h plate (large 2mm to 2.8mm), l plate right and left (large 2mm to 2.8mm), titanium strut plate 18 hole (large 2mm to 2.8mm), double y plate (large 2mm to 2.8mm), y plate (large 2mm to 2.8mm), a)20 holes adaptation plate (large 2mm to 2.8mm), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (medium plates 1mm-2mm), a)10 hole continuous plate (medium 1mm to 2mm), a)6 hole with gap (medium 1mm to 2mm), a)4 hole with gap (medium 1mm to 2mm), a)3 hole with gap (medium 1mm to 2mm), a)2 hole with gap (medium 1mm to 2mm), h plate (medium 1mm to 2mm), l plate right and left side (medium 1mm to 2mm), titanium strut plate 18 holes (medium 1mm to 2mm), x plate (medium 1mm to 2mm), double y plate (medium 1mm to 2mm), y plate (medium 1mm to 2mm), a)20 holes adaptation plate (medium 1mm to 2mm), orbital mesh (0.2- 0.4mm), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (micro plates 0.2mm - 0.8mm), a)10 hole continuous plate (micro plates 0.2mm - 0.8mm), a)6 hole with gap (micro plates 0.2mm - 0.8mm), a)4 hole with gap (micro plates 0.2mm - 0.8mm), a)3 hole with gap (micro plates 0.2mm - 0.8mm), a)2 hole with gap (micro plates 0.2mm - 0.8mm), titanium strut plate 18 holes (micro plates 0.2mm - 0.8mm), x plate (micro plates 0.2mm - 0.8mm), double y plate (micro plates 0.2mm - 0.8mm), y plate (micro plates 0.2mm - 0.8mm), a)20 holes adaptation plate (micro plates 0.2mm - 0.8mm), orbital rim (micro plates 0.2mm - 0.8mm), deformity reduction set, cobalt chromium rods 5.5 mm x 400 mm, mis battery or manual operated disc aspirator 1-2.5 mm, with 0.5 mm increment 13 - 19 gauge with 2mm increment straight or curved, anterior peek cervical standalone cage, intergrated peek cage with titanium screw locking mechanism 6mm-12mm length, self locking screw mechanism, 35 degree screw angulation cephedal to caudal, self drilling screws 3.5mm, 4mm, mis polyaxial set scerw accomadating 5.5mm rods, mis contoured or straight rods dia 5.5mm with sharp edge for edge for easy insertion, mis polyaxial screw with attachment option of plastic retractor for direct imaginga and visualization of rod, modified design for set screw insertion dia 5 t

CTN :40468478

05 Jun, 2025 17.50 Lacs

Salem - Tamil Nadu

Tender For purchase of mini lorry for public health use in p.n.patty town panchayat - a hopper tipper dumper is a truck designed for carryingmaterial, which may be garbage, construction material,mining minerals and any other loose material. the truck isfi tted with specially designed hydraulic tipping mechanismdriven by pto or power pack, which enables the dumper(rear portion expect the driver cage) to move up and downfor unloading of the material. it is the safest way to quicklytransport loose materials from one site to another., generic parametersvehicle category, generic parametersvehicle category, vehicle engine cubic capacity (cc), type of fuel, vehicle emission compliance, number of cylinder in engine (nos), vehicle mileage (declared by oem as certified by test agencyunder rule 115 of cmvr 1989) (kmpl), gradeability of vehicle (degree in first gear), maximum engine power range (in kw), max engine power (kw@rpm), max engine torque (nm@rpm), fuel tank capacity (liter), category of vehicle for which chassis to be used, overall length of vehicle (mm), overall width of vehicle (mm), overall height of vehicle (mm), ground clearance (mm), minimum wheel base (mm), type of tyre and tube (for both front and rear), front vehicle brake, rear vehicle brake, vehicle transmission system, type of steering, turning radius (mm), nos of forward gears, vehicle air intake system, type of clutch, axle configuration, front axle suspension system, rear axle suspension system, air conditioning, standard spare wheel and tool kit, warranty period, battery warranty (month), number of free service (nos), fabrication description, type of tipper, define type of tipper, tipping angle (degree), hopper tipper dumper container capacity/volume (cubicmetres), tipper body pivot length (mm), tipper body length (mm), tipper body height (mm), overall height of tipper from ground (mm), dumping height (mm), body plate thickness (mm), tipper sub frame thickness (mm), hydraulic system, tipping hydraulic cylinders(make), hydraulic system driven by, tipper container material, engine oil pressure level indicator in control panel, fuel gauge indicator in control panel, engine cooling liquid temperature indicator in control panel, operating hour meter, locking/unlocking of tipper discharge container, lowering/lifting of tipper discharge container, counter weight, insurance charges, temporary registration charges & permanent registration charges

corporations/Associations/Others

CTN :40473860

27 May, 2025 NA

Hapur - Uttar Pradesh

Tender For auction sale of battery cabinet,od cage,sp,tx rack,li-ion battery cabinet,ipms,smps,lcu-copper,ac,electrical scrap,battery chiller,piu,rectifier modules,ms scrap,dg cranking,fire extinguisher,sps,fcu

CTN :38924592

06 Jun, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin electrician tradeat iti vyara, gujarat, india - electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible coupling. induction motor rating: dc shunt generator rating: induction motor rating: dc shunt generator rating:, motor generator (dc to ac) set consisting of-shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. shunt motor rating: ac generator rating:, linear i.c. trainer, digital i.c. trainer, component of typical small hydro power, component of typical water mill, low voltage control and systems. with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, residential and small business systems with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, building control systems and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, industrial control system and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, solar system lab suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, training system predictive maintenance and condition monitoring of electric drives, electric vehicle motors and battery training & test bench, industrial electrical testing facility with circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the testing by the student, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester

corporations/Associations/Others

CTN :40401365

22 May, 2025 NA

Hapur - Uttar Pradesh

Tender For auction sale of battery cabinet,od cage,sp,tx rack,li-ion battery cabinet,ipms,smps,lcu-copper,ac,electrical scrap,battery chiller,piu,rectifier modules,ms scrap,dg cranking,fire extinguisher,sps,fcu

corporations/Associations/Others

CTN :40401287

22 May, 2025 NA

Bengaluru - Karnataka

Tender For auction sale of lcu-copper & aluminum,feeder cable,cabinet,battery cabinet,od cage,lcu-copper,micro cooling (mcu),smps,dg acoustics,amf panel,ms scrap,wooden scrap,fiber and plastic,ac,electrical scrap,dg cat - 1,dg cat - 2,dg cat-4,dg battery(with electrolytes),fcu,ipms,lcu aluminium,piu,sp/sps/spsm,stabilizer,tower scrap,tx rack,battery strip copper,battery cells

corporations/Associations/Others

CTN :40401288

22 May, 2025 NA

Bengaluru - Karnataka

Tender For auction sale of lcu-copper & aluminum,feeder cable,cabinet,battery cabinet,od cage,lcu-copper,micro cooling (mcu),smps,dg acoustics,amf panel,ms scrap,wooden scrap,fiber and plastic,ac,electrical scrap,dg cat - 1,dg cat - 2,dg cat-4,dg battery(with electrolytes),fcu,ipms,lcu aluminium,piu,sp/sps/spsm,stabilizer,tower scrap,tx rack,battery strip copper,battery cells

Central Government/Public Sector

CTN :40366036

12 Jun, 2025 NA

Kapurthala - Punjab

Tender For supply of 9kva, 750v ac/415v ac/190v ac, 3-phase, dry type distribution transformer fo r lhb type non-ac coaches., as per drawing: rdso/pe/spec/tl/0158-2010,rev-0,type-1 along wit h doc.edml 225 & corr-1., packing instruction: alternator,rru, erru &accessories, transform er,bulk inverters , battery, charger, self priming monoblock pump, inverter, change ov er control box etc: suitably covered with biodegradable transparent polythene and p acked in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to fac ilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensi ons made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the ite m, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note-1.the ite m &its packing shall carry a qr code(optional) containing the details as listed below ( qr code(optional) to be affixed near name plate of item &on top of packing) a)name of t he manufacturer b)purchaseorder number c)purchaseorder date d)uniqueserial number (or lot number for bulk items) of the manufacturer or e)dateof manufacture f)deliverychallan no. g)deliverychallan date 2.the qr code(optional) shall be as per iso /iec 18004 model2 and the data shall be available as xml using the tags detailed above. 3.in case the above details are not available, or the qr code(optional)s are not readab le, the supplied material is liable to be rejected. [ warranty period: 30 months after the dat e of delivery ]

Central Government/Public Sector

CTN :40366264

23 Jun, 2025 NA

Kapurthala - Punjab

Tender For supply of smoke detector unit for lhb eog coaches, as per drawing: edts087, rev-b,corr- 1&2., packing instruction: alternator,rru, erru & accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box et c: suitably covered with biodegradable transparent polythene and packed in wooden c age: bottom frame to be made of wooden planks 20mm thick & should have support of a t least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by f ork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100m m. the material used for product packaging shall be eco-friendly.a list should be paste d on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name & address and date of despatch etc. [ warranty period: 30 months aft er the date of delivery ]

corporations/Associations/Others

CTN :40065434

30 May, 2025 2.09 Lacs

Koderma - Jharkhand

Tender For corrigendum : procurement of spares for mekaster make rack pinion typeelevator installed at dvc ktps cable guide with double pu spring & j bolt big m10 x 125 mm with nut & washer (make-m/s mekaster), battery charger for elevator, part no-9032410-002, for m/s mekaster engineering make rack & pinion type elevator, single phase preventor relay (vsp 2) for mekaster make rack & pinion type elevator, part no. 25020105022, switch arm , part no.- 387019, for m/s mekaster engineering make rack & pinion type elevator, limit switch up & down- ll1 & switch arms, part no: 3000623-451/387019, make: mekaster, cage limit switchlla; part no.3000629- 120, spares for m/s mekaster engineering make rack & pinion type elevator, limit/ up & down cam with fastners & final limit cam, part no: 388468/388776, make: mekaster, proximity switch (sensor for limit cam) for mekaster make rack & pinion type elevator, part no. 3001606-101, cable trolley aluminium wheel make mekaster material aluminium part no.: 9029 644-101, three phase switch 63 amp ; part no.3000263-151 for for m/s mekaster engineering make rack & pinion type elevator

Metal Product Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors