Latest metal structural Tenders | Government metal structural Tenders

CTN :45321497

19 Jun, 2026 28.80 Lacs

Jhalawar - Rajasthan

Tender For corrigendum : supply of spares of soot blowers of (2x600 mw), katpp, rvunl, jhalawar-design, fabrication, supply and installation of fabricated manhole door with rearranging bends & tubes accordingly of boiler unit#1&2 (2x600mw), katpp, rvunl, jhalawarfabrication and supply of id fan guide vane at katpp, rvunl, jhalawarsupply & erection testing and commissioning of the high mast lighting system (hmls) at colony and plant premises walls at katpp, rvun, jhalawarsupply of spares of soot blowers of (2x600 mw), katpp, rvunl, jhalawarsupply and commissioning of electric wire rope hoist at id fans area in 2x600 mw katpp, jhalawarsupply of horizontal centrifugal pump for unloading 98% concentration sulfuric acid and sulfuric acid dosing pumps installed in cw chemical dosing system at, katpp, jhalawarsupply of pvc hot water distribution pipes and fittings of ndcts for unit 1 and 2 at katpp, jhalawarsupply of spares for dust suppression system for coal stock pile and conveyer system in chp, katpp, jhalawarsupply of spares for parker and hugland make hydraulic power pack of stacker cum reclaimer of chp at katpp rvun, jhalawarsupply of coupling and coupling spares for katpp, jhalawarprocurement of sf6 gas (with cylinder) of 99.9% purity for 400kv, 220kv & gcb circuit breakers at katpp, jhalawarprocurement of various testing equipments used for transformers, protection relays, and circuit breakers of unit#1 & 2 katpp, jhalawarsupply of spares of coal feeder eg3690 sr. no. 2010-109 (make- shenyang stock electric power equipment co. ltd., china) of 2x600 mw units, katpp, jhalawarsupply, fabrication and installation of gas regulating damper flaps, box support & partition plate in boiler at katpp, rvunl, jhalawarprocurement of paper ream of a4 size (75 gsm) for fy 2026-27, katpp, rvunl, jhalawarsupply, installation, testing and commissioning of high performance energy chain system in place of reeling drum of cable system in bunker travelling. tripper-2 at chp, katpp, jhalawarsupply of inline booster pump for dust suppression system at wagon tipplers in chp at katpp, jhalawarss erw pipe and fittings for sg fill pump to cpu unit# 1 and for other site purpose at katpp, rvunl, jhalawarpurchasing of rtds and thermocouples installed at 2x600mw, katpp, rvunl, jhalawar

Central Government/Public Sector

CTN :45488262

19 Jun, 2026 NA

Medak-T - Telangana

Tender For fabrication of rotor lifting equipment/b9azs00123

State Government

CTN :45341698

18 Jun, 2026 42.45 Crore

Multi City - Telangana

Tender For corrigendum : amrslbc project dindi balancing reservoir design fabrication supply erection commissioning and testing of em parts radial crest gates hoist bridges hoist equipment including stoplog elements gantry crane and gantry path including sandblasting and painting for spillway of dindi balancing reservoir

Central Government/Public Sector

CTN :45251338

12 Jun, 2026 NA

Tiruvallur - Tamil Nadu

Tender For corrigendum : providing of custom bid for services - structural fabrication and miscellaneous equipment painting in boiler, turbine & auxiliaries

Central Government/Public Sector

CTN :45468322

18 Jun, 2026 NA

Ratnagiri - Maharashtra

Tender For fabrication of technical equipment covers as per specification

CTN :45468954

22 Jun, 2026 NA

Dantiwada - Gujarat

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - office space; fabrication group equipment/machinary; service provider

State Government

CTN :45445001

24 Jun, 2026 60.00 Lacs

Jummu - Jammu And Kashmir

Tender For installation of electro-mechanical equipment at cps muthi for water supply to durga nagar. - h.c pumping units-2no-providing, installation, testing and commissioning of 50000 gph x 150 mtrs. head (02 no.s) horizontal centrifugal split casing pump with slow peed motor at cps muthi by way of excavation of earth work for laying of rcc foundation block. the job includes construction of foundation block for installation of 50000 gph x 150 mtrs. hend horizontal centrifugal pump set at cps muthi. by way of dismantling of old foundation blocks with the help of required tool and tackle and manual labour as per site requirement. disposing off the excavated material from the site to distance of at least 0.50 km with the help of manual labour and mechanical transport. job includes digging of pit of size 6x3.5x4and disposal of excavated material from the site of the work to the place of dumping. providing/lying of rcc foundation block of size 5x3.5x5(labove the ground level) in 1:2:3 cement concrete mix having requisite reinforcement with 12 mm dia. tor steel from center to center with proper spacing. fabrication and fitting of foundation bolts duly welded with cross members and threading at top with nut. foundation bolt shall be welded with tor steel and firmly grouted in the cement concrete mix, plastering and finishing from outside: fitting of base frame plate on the top of the block and leveling it both horizontally as well as vertically. strengthening of the base frame by providing and welding of m. s. channel cross members of required size and as per the size of frame for giving extra strength against vibration of the unit and on full load running conditions. complete job includes cost of material and labour charges for laying of the foundation block, plastering and finishing. placing horizontal centrifugal pumping unit on the base frame by using hydra crane, chain block, manual labour and other tools and tackles. leveling of the pump and motor properly on the base frame and coupling them by fitting of the m.s. coupling bolts with nuts rubber bushes and m.s. fasteners required for horizontal centrifugal pumping unit base connections with base frame job includes cost of material, carriage of machinery and allied materials to the site of work, loading/unloading and allied charges.suction line: fabrication of suction line by providing / fabrication of ms pipe of dia 150 mm. of length as per site requirement (09 mtr approx.) proper beveling of ms pipe for v-butt welding joints. the job includes providing and. fabrication of ms bends of 150 mm dia out of ms pipe 150 mm dia. providing/fabrication / fitting of ms flanges-4no wherever required and with the one flange compatible to be fitted the suction flange of both the pumps. job includes providing and fabrication of ms bends of 150 mm dia -04 no. the job also includes providing and fitting of sluice valves of 150 mm dia. (cs material)- 02no.(01 no.for each suction line of 02 pump sets) on suction lines. providing, fabrication and fitting of ms flanges at both end of sluice valve as per site requirement.delivery line: fabrication of delivery line by providing and fabrication of ms pipe 125 mm. upto manifold. proper beveling of ms pipes for v-butt welding joint. job includes fabrication/fitting of ms pipe 125 mm dia. upto manifold. job also involves making interconnection with manifold with the delivery flange of newly installed pumps. the job involves fabrication/fitting of ms bends as per site requirement no-02 out of 125 mm dia. ms pipe. fabrication of 04 no. ms flange of 125 mm dia. to match delivery flange of the pump and welding of flange with one end of the bend. makes interconnection of manifold with delivery pipe. job also includes providing/fitting of sluice valve (cs)-2no and reflux valve of 125mm-2no (cs material) on delivery side of each pumpset by the way of welding for on delivery line. all the welding work shall have to executed butt pre heated high pressure welding electrod

corporations/Associations/Others

CTN :45443702

10 Jun, 2026 16.65 Lacs

Vijayawada - Andhra Pradesh

Tender For supply and fixing of 10hp dewatering pump sets with all accessories for ensuring rainy season 2026 at east side of bhupesh guptha nagar in circle iii area fabrication ,transportation and and supply of suitable size closed out door type panel board made of 16 swg crca sheet steel enclosure, 14 swg mounting plate for cable entry fabricated , painted with two coats of red oxide primer and two coats of grey paint, lock and key arrangements ,open door type etc., complete consisting of the following equipment with all internal wiring using finolex copper frls cables including 10hp capacity dol starters- 6no's, 40a 3p mcb's-6no's, 50a 3pole connctors-6no's, single phasing preventer -6no's, 160a mccb for incomming and including aluminium bus bar and ryb indication lamps . makes:make c&s/crompton / l&t / siemens/bch. as per directed by the departmental authorities , s & f gunmetal (gm) ball valve with ss ball and ss spindle as per is - class - i, indian make heavy type - 25 mm nb size as per directed by the departmental authorities. , supply and delivery of 12mm nylon ropes etc complete as direceted by the departmantal authorities. , supply and delivery of 150mm dai (6") pvc foot valve screw type with approved make as per directed by the departmental authorities , supply and delivery of 150mm dai ci hose coller as per directed by the departmental authorities , supply and delivery of 150mm dia (6") canoflex pipe as per directed by the departmental authorities , supply and delivery of 150mm dia (6") dai gi b class long bend with provision of 25mm nipple and bend for section side filling as per directed by the departmental authorities , supply and delivery of 150mm dia (6") dai screw type gi/ ms flanges as per directed by the departmental authorities , supply and delivery of 150mm dia (6") hose clamps as per directed by the departmental authorities , supply and delivery of 3mm/6mm rubber packing including conveyance etc., complete, but excluding taxes as per directed by the departmental authorities. , supply and delivery of bolts and nuts of various sizes with double washers including conveyance etc., complete, but excluding taxes as per directed by the departmental authorities. , supply and delivery of suitable size mesh to foot valve to avoid the floating matter etc complete as direceted by the departmantal authorities. , supply and delivery of three-phase 10hp monoblock motor pumpset having input voltage of 440v, 50hz has a maximum flow of 44 lps and head of 11 mtrs and 150mm dia suction and 150mm dia delivery of make: texmo /kirloshkar (aqua/taro) with cast iron impeller and gland packing as per directed by the departmental authorities. , supply and delivey of 150mm dia rubber washers etc., complete as per directed by the departmental authorities , supply and making end termination with heavy copper lugs (pin/ ring type) as per is specification, duly crimped with crimping tool, pvc tape etc., of size 35sq mm approved. , supply and transportation of 1.0hp (25x25mm) single phase mono block ci body motor pumpset confirms to is 9079:2002 makes: kirloskar / crompton / texmo / cri / ksb/lubi / havells hi-flow v2 / psg/ aryen varsha /falcon. , supply delivery and fixing of 10 hp motor dome for covering of motor body., including cost and conveyance of all materials etc., complete as directed by the departmental authorities. , supply of 3 core 6.0 sq mm isi marked flat copper cable of isi for submersible motors confirming to is: 694:1990. makes:finolex/ rrkabel/ polycab /havells/ kei/ gloster/ goldmedal / gm/ finecab/ million/ apar(anushakthi) as per directed by departmental authorities. , supply of 35 sq mm 3 core isi marked pvc insulated and sheathed frls/frls-h round copper cable for voltage up to 1100v as per is 694/1990. makes: fine cab/polycab and approved make.

corporations/Associations/Others

CTN :45443703

10 Jun, 2026 16.65 Lacs

Vijayawada - Andhra Pradesh

Tender For supply and fixing of 10hp dewatering pump sets with all accessories for ensuring rainy season 2026 at east side of sai ram cut prices in circle iii area- fabrication ,transportation and and supply of suitable size closed out door type panel board made of 16 swg crca sheet steel enclosure, 14 swg mounting plate for cable entry fabricated , painted with two coats of red oxide primer and two coats of grey paint, lock and key arrangements ,open door type etc., complete consisting of the following equipment with all internal wiring using finolex copper frls cables including 10hp capacity dol starters- 6no's, 40a 3p mcb's-6no's, 50a 3pole connctors-6no's, single phasing preventer -6no's, 160a mccb for incomming and including aluminium bus bar and ryb indication lamps . makes:make c&s/crompton / l&t / siemens/bch. as per directed by the departmental authorities , s & f gunmetal (gm) ball valve with ss ball and ss spindle as per is - class - i, indian make heavy type - 25 mm nb size as per directed by the departmental authorities. , supply and delivery of 12mm nylon ropes etc complete as direceted by the departmantal authorities. , supply and delivery of 150mm dai (6") pvc foot valve screw type with approved make as per directed by the departmental authorities , supply and delivery of 150mm dai ci hose coller as per directed by the departmental authorities , supply and delivery of 150mm dia (6") canoflex pipe as per directed by the departmental authorities , supply and delivery of 150mm dia (6") dai gi b class long bend with provision of 25mm nipple and bend for section side filling as per directed by the departmental authorities , supply and delivery of 150mm dia (6") dai screw type gi/ ms flanges as per directed by the departmental authorities , supply and delivery of 150mm dia (6") hose clamps as per directed by the departmental authorities , supply and delivery of 3mm/6mm rubber packing including conveyance etc., complete, but excluding taxes as per directed by the departmental authorities. , supply and delivery of bolts and nuts of various sizes with double washers including conveyance etc., complete, but excluding taxes as per directed by the departmental authorities. , supply and delivery of suitable size mesh to foot valve to avoid the floating matter etc complete as direceted by the departmantal authorities. , supply and delivery of three-phase 10hp monoblock motor pumpset having input voltage of 440v, 50hz has a maximum flow of 44 lps and head of 11 mtrs and 150mm dia suction and 150mm dia delivery of make: texmo /kirloshkar (aqua/taro) with cast iron impeller and gland packing as per directed by the departmental authorities. , supply and delivey of 150mm dia rubber washers etc., complete as per directed by the departmental authorities , supply and making end termination with heavy copper lugs (pin/ ring type) as per is specification, duly crimped with crimping tool, pvc tape etc., of size 35sq mm approved. , supply and transportation of 1.0hp (25x25mm) single phase mono block ci body motor pumpset confirms to is 9079:2002 makes: kirloskar / crompton / texmo / cri / ksb/lubi / havells hi-flow v2 / psg/ aryen varsha /falcon. , supply delivery and fixing of 10 hp motor dome for covering of motor body., including cost and conveyance of all materials etc., complete as directed by the departmental authorities. , supply of 3 core 6.0 sq mm isi marked flat copper cable of isi for submersible motors confirming to is: 694:1990. makes:finolex/ rrkabel/ polycab /havells/ kei/ gloster/ goldmedal / gm/ finecab/ million/ apar(anushakthi) as per directed by departmental authorities. , supply of 35 sq mm 3 core isi marked pvc insulated and sheathed frls/frls-h round copper cable for voltage up to 1100v as per is 694/1990. makes: fine cab/polycab and approved make.

corporations/Associations/Others

CTN :45443705

10 Jun, 2026 16.65 Lacs

Vijayawada - Andhra Pradesh

Tender For supply and fixing of 10hp dewatering pump sets with all accessories for ensuring rainy season 2026 at east side of ranadheer nagar katta in circle iii area- fabrication ,transportation and and supply of suitable size closed out door type panel board made of 16 swg crca sheet steel enclosure, 14 swg mounting plate for cable entry fabricated , painted with two coats of red oxide primer and two coats of grey paint, lock and key arrangements ,open door type etc., complete consisting of the following equipment with all internal wiring using finolex copper frls cables including 10hp capacity dol starters- 6no's, 40a 3p mcb's-6no's, 50a 3pole connctors-6no's, single phasing preventer -6no's, 160a mccb for incomming and including aluminium bus bar and ryb indication lamps . makes:make c&s/crompton / l&t / siemens/bch. as per directed by the departmental authorities , s & f gunmetal (gm) ball valve with ss ball and ss spindle as per is - class - i, indian make heavy type - 25 mm nb size as per directed by the departmental authorities. , supply and delivery of 12mm nylon ropes etc complete as direceted by the departmantal authorities. , supply and delivery of 150mm dai (6") pvc foot valve screw type with approved make as per directed by the departmental authorities , supply and delivery of 150mm dai ci hose coller as per directed by the departmental authorities , supply and delivery of 150mm dia (6") canoflex pipe as per directed by the departmental authorities , supply and delivery of 150mm dia (6") dai gi b class long bend with provision of 25mm nipple and bend for section side filling as per directed by the departmental authorities , supply and delivery of 150mm dia (6") dai screw type gi/ ms flanges as per directed by the departmental authorities , supply and delivery of 150mm dia (6") hose clamps as per directed by the departmental authorities , supply and delivery of 3mm/6mm rubber packing including conveyance etc., complete, but excluding taxes as per directed by the departmental authorities. , supply and delivery of bolts and nuts of various sizes with double washers including conveyance etc., complete, but excluding taxes as per directed by the departmental authorities. , supply and delivery of suitable size mesh to foot valve to avoid the floating matter etc complete as direceted by the departmantal authorities. , supply and delivery of three-phase 10hp monoblock motor pumpset having input voltage of 440v, 50hz has a maximum flow of 44 lps and head of 11 mtrs and 150mm dia suction and 150mm dia delivery of make: texmo /kirloshkar (aqua/taro) with cast iron impeller and gland packing as per directed by the departmental authorities. , supply and delivey of 150mm dia rubber washers etc., complete as per directed by the departmental authorities , supply and making end termination with heavy copper lugs (pin/ ring type) as per is specification, duly crimped with crimping tool, pvc tape etc., of size 35sq mm approved. , supply and transportation of 1.0hp (25x25mm) single phase mono block ci body motor pumpset confirms to is 9079:2002 makes: kirloskar / crompton / texmo / cri / ksb/lubi / havells hi-flow v2 / psg/ aryen varsha /falcon. , supply delivery and fixing of 10 hp motor dome for covering of motor body., including cost and conveyance of all materials etc., complete as directed by the departmental authorities. , supply of 3 core 6.0 sq mm isi marked flat copper cable of isi for submersible motors confirming to is: 694:1990. makes:finolex/ rrkabel/ polycab /havells/ kei/ gloster/ goldmedal / gm/ finecab/ million/ apar(anushakthi) as per directed by departmental authorities. , supply of 35 sq mm 3 core isi marked pvc insulated and sheathed frls/frls-h round copper cable for voltage up to 1100v as per is 694/1990. makes: fine cab/polycab and approved make.

Metal Structural Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors