Latest metal structure sale Tenders | Government metal structure sale Tenders

Central Government/Public Sector

CTN :44144402

11 Mar, 2026 NA

Raigad - Maharashtra

Tender For supply of welding electrode as per aws e 6013 for structural steel, size: 3. 15 mm. dia. x 350 mm. long , welding electrode as per aws e7018 for carbon steel, size: 2. 5 mm. dia. x 350 mm. long , welding electrode as per aws e7018 for carbon steel, size: 3. 15 mm. dia. x 350 mm. long , filler wire as per aws a-5. 18 er-70-s2 for carbon steel material, size: 2. 4 mm dia x 1000 mm long.

CTN :44146902

28 Feb, 2026 16.00 Lacs

Hamirpur-Up - Uttar Pradesh

Tender For providing material, fabrication, welding, installation and painting of ms structural cover over the sump at second stage of vindhyawasini bhaura danda pump canal hamirpur

Central Government/Public Sector

CTN :44134535

27 Feb, 2026 NA

Ajmer - Rajasthan

Tender For auction sale of depot ferrous scrap - scrap u/s angle, channel, girder, pedestal, tie bar, ladders, flats, channel/angle of wagons and fabricated & riveted structural material of angle, channel, girder of various sorts & various sizes. location: bin no. 134

CTN :44083918

28 Feb, 2026 NA

Solan - Himachal Pradesh

Tender For supply of xlpe cable for working voltages up to and including 1. 1 kv as per is 7098 (part 1) (q2) , dismantling and taking down of concrete , m and l for pcc 1 4 8 type d 2 using 40mm graded stone , m and l for pcc 1 2 4 type b 1 using 20mm graded stone aggregate in coping and the like including , disconnecting of ht and lt cables earth strips etc and and taking down of unserviceable declared ber transformers , s and f or commissioning of indoor type non sealed type mineral oil distribution energy efficient transformer isi marked of capacity 250 kva , s and f or commissioning of outdoor type non sealed type mineral oil distribution energy efficient transformer of capacity 200 kva , material and labour for earthing complete , material and labour for installation testing and commissioning , material and labour for gi earth strip , material and labour for copper earth strip of size 20 x 3mm thick and fixed on pole , dismantling taking out carefully old oblique unserviceable ug cable , taking down of existing unserviceable hdpe pipe of size 90mm outer dia , m and l for replacement of unserviceable double walled corrugated hdpe duct pipe of 90mm outer dia , dismantling cross arms of ms channel or angle sections etc complete all as specified , supply and fix cross arms bracings supports clamps and back plates fabricated from structural steel ) /bid number: gem/2026/b/7220144 * /dated: 17-02-2026 & & / bid document1 / 20

CTN :44062033

24 Feb, 2026 NA

Barmer - Rajasthan

Tender For engagement of agency for procurement of material for works contract of structural steel is2062 e250br for hrrl refinery barmer rajasthan

Central Government And Public Sector

CTN :43988543

23 Feb, 2026 NA

Kalpakkam - Tamil Nadu

Tender For supply of supply of structural steel material c c - 1 channel isamc 75 , 2 channel isamc 100 , 3 channel isamc 125 , 4 channel isamc 150 , 5 channel isamc 200 , 6 angle isa 50 x 50 x 6 , 7 angle isa 65 x 65 x 8 , 8 angle isa 75 x 75 x 8 , 9 angle isa 75 x 75 x 10 , 10 angle isa 65 x 65 x 6 , 11 angle isa 25 x 25 x 6 , 12 steel strip flat 50 x 6 , 13 steel strip flat 25 x 5 , 14 steel strip flat 40 x 6 ) /bid number: gem/2026/b/7110564 * /dated: 12-02-2026 & & / bid document1 / 17

Central Government / Public Sector

CTN :43987232

25 Feb, 2026 NA

Multi City - Karnataka

Tender For auction sale of others - control arm ¿ 15.930 mt-delivery on actual weighment basis. lot no. 9176 26 01 81 gtl sadp ca ka , available with sse rbk yg. scrap cond released and u/s defaced control arm support right to rcf pl no. 33500198. rcf drg no. lw03247 alt ¿a¿ (high strength, non alloy structural steel). total qty.: 1180 nos/15.93 mts. (approx.) available at peb building outside, yadgir end of rail bogie kharkhana, near saidapur. ds-8 no. 091765-24-00720, dt. 24.11.25. hsn code: 720429 - gst 18%. note to the bidders 1) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2) post auction no representation shall be entertained.3) for photos of this lot, kindly click on view lot image on bottom left side. 4) gas/chisel cutting is permitted, if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description 5) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7) clubbing of the lots, what so ever, is not permitted for loading 8) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr.dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 9) railways does not guarantee for quality, quantity description etc.

Central Government/Public Sector

CTN :43986950

20 Feb, 2026 NA

Igatpuri - Maharashtra

Tender For auction sale of others - scrap condemned demolition of old fuelling point shed titoli up yard near bsl running room igatpuri consisting of ¿ structural steel(purlin channels, equal angles, plates, angle rafters, flats, pipes etc), structural rails and g.i.sheets, shutters, wood remarks :- lot is approachable by pakka road. the delivery will be made on as is where is basis and by lot basis. the items mentioned in the description only will be delivered. lot number is exhibited/painted on the structure. the quantity is worked out on approximate basis. the delivery will be made on lot basis and no part delivery/part payment will be allowed. materials like electric wires, fittings & cables and other such kind of material available inside the building/structure which is not within the scope of lot description, shall be handed over by the purchaser to custodian. dismantling& cutting is allowed for easy loading purpose at the risk & cost of the purchaser. dismantling is permitted up to ground level only. the purchaser should ensure that during dismantling & cutting operation no nearby structure/building should be affected and take necessary care/safety precautions to avoid any mishap as well as damage to railway property. the purchaser will be fully responsible if any accident/unusual incident occurs at work site/place during dismantling. extra precaution to be taken if there are trees near the structure or its branches are spread over the same.the list & location of structures are available with stockholder.the purchaser is advised to see the lot site before bidding. no claim will be entertained after sale of lot. lot is ok for sale with above observations. stockholder sse/works/igatpuri qty ( 1.0by lot) f d p (80 day) location- titoliup yard near bsl running room, igatpuri.

Central Government/Public Sector

CTN :43921179

02 Mar, 2026 2.75 Crore

Cuddapah - Andhra Pradesh

Tender For tender for supply of puc civil allied works : : - earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m , as directed by engineer-in-charge. all kinds of soil , filling available excavated earth (excluding rock) in trenches , plinth , sides of foundations etc. in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead up to 50 m and lift upto 1.5 m , complete as per directions of engineer-in-charge. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1-3-6 (1 cement - 3 coarse sand (zone-iii) -6 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finishing and reinforcement - all work up to plinth level 1-1.5-3 (1 cement - 1.5 coarse sand (zone-iii)- 3 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , steel reinforcement for r.c.c. work including straightening , cutting , bending , placing in position and binding all complete above plinth level and below plinth level.thermo-mechanically treated bars of grade fe-500d or 550d , complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and lifta) in foundations , footings , bases of columns , etc.complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and liftb) in superstructure columns , lintels , beams , plinth beams , roofs etc. , complete as per directions of engineer-in-charge. , dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete , complete as per directions of engineer-in-charge. , supplying and filling in plinth with sand under floors , including watering , ramming , consolidating and dressing complete , complete as per directions of engineer-in-charge. , demolishing r.c.c. work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer - in- charge. , neat cement punning , providing and grouting of pockets with cementitious grout non shrink of approved make by suitable means free flowing pump curing etc complete as per directions of engineer in charge the payment shall be made on the basis of actual weight of approved grout used as per directions of engineer in charge , structural steel work riveted , bolted or welded in built up sections , and framed work like purlins , frames , trusses etc. including cutting , hoisting , fixing in position and applying two coats of synthetic enamel paint over a coat of approved steel primer , complete as per directions of engineer-in-charge.. , providing , laying and jointing glazed stoneware pipes of 150mm dia pipe of class sp1with stiff mixture of cement mortar in the proportion of 1ratio1 1 cement 1 fine sand including testing of joints etc complete as per directions of engineer in charge , constructing masonry chamber 120x120x100 cm inside , in brick work in cement mortar 1-4 (1 cement - 4 coarse sand) for sluice valve , with c.i. surface box 100 mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and rcc top slab 1-2-4 mix (1 cement - 2 coarse sand - 4 graded stone aggregate 20 mm nominal size) , ic necessary excavation , foundation concrete 1-5-10 (1 cement -5 fine sand - 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1-3 (1

Central Government/Public Sector

CTN :43866843

25 Feb, 2026 19.90 Crore

Cuddapah - Andhra Pradesh

Tender For tender for supply of design and engineering of imcc panel 2 nos and vfds and plc network , design and engineering of apfc and hvac , design and engineering of apfc and field instruments , design and engineering of cables and termination and airconditioning for imcc building , design and engineering of earthing of imcc , field equipments and soil testing , design and engineering of civil buildings and structure foundations , design and engineering of imcc building with earthing system , design and engineering of structural works for cable laying for both incoming and outgoing cables , design and engineering of lighting system of imcc building , equipment locations at ccr ground floor and along the structural path for cable route , design of fire detection and alarm system for building and cable alley area along with integration and display at fire station/existing control centre , supply of imcc panels , vfd panels , supply of apfc panels , hvac system/ air conditioning systems for imcc building and other area air conditioners as mentioned in scope of work , supply of mldb , lighting distribution boards , lighting material including db , light fittings , and all related accessories or wiring material and other electrics etc , supply of field instruments and necessary piping materials as required , supply of plc and other related required accessories , supply of lt cables and other related accessories for electrical , termination material and other instrumentation cables etc and other related electrics as required , supply of cable trays for electrical and instrumentation , supply of all earthing material as per is 3043 for imcc and connection to earth pits for motors , panels etc , supply of fire detection and alarm system for building and cable alley area along with integration and display at fire station/existing control centre , erection , testing , commissioning , and handover of equipments of imcc panels and vfd panels , erection , testing , commissioning , and handover of equipments of apfc panels and hvac system , erection , testing , commissioning , and handover of equipments of lighting system as per above supply , erection , testing , commissioning of earthing system , erection , testing , commissioning of field instruments and necessary piping materials etc as required , erection , testing , commissioning and handover of plc , erection , laying , testing and commissioning of lt cables cable terminations wherever required along with necessary accessories is in the scope of the contractor for electrical and instrumentation , erection , testing and commissioning of cable trays for electrical and instrumentation , erection , testing and commissioning of fire detection and alarm system for building and cable alley area along with integration and display at fire station or existing control centre , substructure excavation , foundation works footings , columns up to plinth level , dpc damp proof course , and backfilling. , superstructure columns , beams , slabs , brickwork or masonry for all floors above plinth level , and formwork up to ground floor , finishes plastering , flooring tiles , marble , painting , wall cladding , and other interior or exterior finishes , plumbing works , fixing of doors up to ground floor. , superstructure columns , beams , slabs , brickwork or masonry for all floors above plinth level , and formwork for subsequent floors as per approved design , finishes plastering , flooring tiles , marble , painting , wall cladding , and other interior or exterior finishes , plumbing works , fixing of doors for subsequent floors as per approved design , supply and erection of structural works for cable laying for both incoming and outgoing cables

Metal Structure Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector