Latest metal stud Tenders | Government metal stud Tenders

CTN :45678815

06 Jul, 2026 NA

Kinnaur - Himachal Pradesh

Tender For supply of spares for jcb - 320 a5535 adaptor inlet manifold , 320 a0543 stud m6x80x1 , 400 y4200 cowing fan 578 mm , 2206 0816 clip worm drive 8 to 16 mm , 826 11017 tie cable , 400 y1265 cooling pack assy , 335 y5197 bonnut , 1411 0003d washer 3 by 8 med plain , 1420 0007z washer m8 , 826 1254 nut rivet , 401 g33390 roof moulding trimmed , 334y0970 1 door assy tinned glass left side , 334y0965 1 glass frame side window tinned glass left side , 334y4429 1 wiper motor assy front wiper , 333 d8588 bracket locking c , 333 y8264 tape reflective white , 335 y5201 pannel side grille lh , 335 y5200 pannel side grille rh , 1305 0308z set screw m8x30 , 335 y5268 hose 10bsp hp 2030 mm alt pt no 332 y6629 , 335 y5266 hose 10bsp hp 1275 mm alt pt no 332 y8480 , 400 u8762 adopter top hose , 335 y4035 grille front , 646 05321 adhensive , 128 f8985 fender rear lh , 400 r3673 adoptor top hose dia 48 , 400 r3453 adoptor bottom hose , 333 y8199 track rod link assy , 614 80055 hose 5 by 8 bsp hp 550 mm , 835 00017 cap grease nipple , 335 y8910 pin pivot tipping link end , 335 y7803 pivot pin dipper end

CTN :45333105

30 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of nut steel bsf 5 8 , nut plain hex m12 , ss bolts 8 4 5 mm , ss bolt size 8 55 mm pitch 1251 mm , ss bolts 8 65mm pitch 1 25mm , bolt size 46 45 mm pitch 2mm , gi bolt and nut 8 35 mm , ss bolt with nut hex head m 10 35mm , bolt 14 45 mm , bolt brass and nut 6 18 mm x length ft head , screw steel 1 x 0ba , nut plain hex head m 8 , screw ba pb hex head 1 x 0ba , screw machine ok slotted hd m 12 40 mm , screw , ss hex screw 8 25 mm , hex hd full tread s s screw size m 12 x 25 pitch 1 75 mm , hex head full thread ss screw size m 8 25 pitch 1 25 mm , bolt bsf precision r steel hex hd zinc plated 7 8 2 1 2 l , bolt hex bsw 5 8 3 , bolt steel ht 5 8 4 , steel bolt and nut m 8 75 , ms bolt and nut m 20 65 , bolt machine hex hd precision pitch phospted steel 4 6 m 20 , bolt machine hex precision brass m 10 35 mm , bolt machine hex head m 14 25 mm , brass bolt m 8 45 mm , brass bolt m 10 35 mm , bolt machine hex ms m 6 40 mm , bolt hex m 16 45 2 mm , bolt machine hex hd ms plated m 20 65 2 5 mm , studs bsf h t steel plain 7 8 2 3 4 long length of metal , stud steel bsf 7 8 4 round h t screwed , stud h t steel 5 8 unc 2 long , stud ht steel 3 4 7 2 , nut hex 7 8 bsf carbon molybdenum copper plated , washer spring single type 4 4 23 2 3 mm , ss bolts 14 60 mm full threaded pitch 2 mm , nut stainless steel 10 mm pitch of thread 2 mm non magnetic , ss washer 8 4 mm id 17 mm od 1 6 mm thk , ss washer 10 5 mm id 21 mm od 2 mm thk , ss bolt 20 60 mm full threaded pitch 2 5 mm , ss washer 13 mm id 24 mm od 2 5 mm thk , ss bolt 16 60 mm full threaded pitch 2 mm , ss bolt 20 70 mm full threaded pitch 2 5 mm

CTN :45628776

22 Jun, 2026 42.78 Lacs

Delhi - Delhi

Tender For annual repair and maintenance of to goi press colony gpra qtrs at mayapuri new delhi during 2026-27 sh-supply of painting material for external finishing- anti-termite pesticides -(imidacloprid) , cement opc/ppc, , cement - white, , admixture for concrete, , reinforcement steel (thermo-mechanically treated bars (fe 550 d), , alccofine, , mechanical couplers for reinforcement, , ready mix cement concrete, , architecture expansion/seismic joint system, , expansion filler board premoulded compressible (non bituminous), , concrete curing compound, , core cutting, , expanded polystyrene sheet (eps), , soil anchor for diaphragm wall, , pvc water stop, , ready mix polymer jointing cement mortar, , glass brick/glass block, , all type of door lock, floor spring, door closer including mortice locks, , customised door window hardware /joinery fittings, , flush door shutter, , aluminium, , façade and window system, , fire stop in curtain wall system, , pop out vent for façade and system window hardware, , aluminium glass partition system, , aluminium openable louver, , air transfer grill, , fire rated glazed door, , metal fire rated doors, , wooden fire rated doors, , fire rated hardware & system, , fire seal, fire smoke seal, , fire rated glass, , fire rated rolling shutter, , fire curtain, , glass shower partition, , modular toilet cubical, , laminates, , compact laminate sheet, , polysulphide sealant/pu sealant, , glass & mirror, tinted glass,, , high performance glass, reflective glass, lacquered/back painted glass all superior quality, , silicone sealant, , polyester powder coating/pvdf coating, , wired glass, figured/pattern glass, , acoustic seal / door seal, , pvb/sgp laminate film, sentry film, , wood adhesive, , frosted film, , bmu/ façade cleaning system, , dry stone cladding undercut anchor, , stone sealer, , water & stain repellant coating for stone cladding and stone flooring, , gypsum lightweight plaster, , ready mix cement plaster, , crystalline integral, , waterproofing, , water proofing compound, , water proofing membrane (pvc/hdpe)/water, , proofing coating (pu/polyurea/ acrylic/elastomeric cementitious) / sri coating/pitch pu, , water stops - hydrophilic swellable rubber strip (non bentonite type), , polyurethane over deck insulation foam, , food grade epoxy coating for water tank, , vitrified tiles, , tiles/stone fixing adhesive/epoxy grout, , polyurethane concrete flooring, epoxy flooring, self leveling flooring, , wooden flooring and skirting, , raised/false access flooring system, , solid surface (corian), , car deck flooring system, , engineered marble, , rubberized sports flooring (gym flooring), , stainless steel, , structure steel & hollow section-primary producers only, , , , , , access panel in false ceiling system, acoustic panel, aluminium/metal ceilings (baffle and open cell ceiling), aluminum panels, anchor fastener, rebar, chemical/mechanical fastener, expandable fasteners, b, bonded particle board, cement fiber board/ cement, d, dry wall gypsum partition/paneling system for toilet, gypsum wall paneling, , , , , , , grg/gi suspended ceiling grid system & close/ c stud framing system, gypsum ceiling system (plain/perforated),, i c, non shrink cementious precision (anchoring) grout, paint - acrylic emulsion (exterior), paint - anti carbonation paint, paint - plastic emulsion (internal), paint - pu & epoxy paint and primer, paint - synthetic enamel, paint texture paints (interior), plywood (all plywood shall be procured from fully owned factory of the manufacturer and not from jv / outsourced), pu polish for wood work, rock wool/glass wool insulation, , , , , , ss modular railing system, steel (ms) rolled section & plate, steel hollow sections, t, tile trim/threshold, veneer, white cement based putty, soft board, , polycarbonate sheet/skylight, , c, , galvanized/galvalume roofing sheet and accessories d, , pre cast concrete landscape elements, gratings, kerb, drain cover, , preca

CTN :45593064

02 Jul, 2026 NA

Delhi - Delhi

Tender For supply of instant curing bituminous ready cold mix , coarse sand zone iii , stone aggregate 20mm 10mm , gsb grade-iii , common burnt clay fps non modular bricks class designation 7.5 , paver block 60 mm thick of m-30 grade , kerb stone of m-25 grade , cement opc grade-43 , flexible median marker , ms body round wire mesh delineator , retro reflective tape hip , abs body without shank road stud , abs body double shank road stud

State Government

CTN :45558196

22 Jun, 2026 NA

Medininagar - Jharkhand

Tender For supply of list of approved construction materials for the preparation of schedule of rates for the year 2026, basic rates of which to be approved by the state level schedule rate committee (materials should conform to relevant b.i.s., mord and mort&h specifications). the rates will be inclusive of royalty but exclusive of all taxes, g.s.t,overhead and contractor's profit. "rates are at source"quarry/ crusher plant. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source , fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher. , close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel , aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 to

State Government

CTN :45562938

22 Jun, 2026 NA

Ranchi - Jharkhand

Tender For stone boulder of size 150 mm and below at source quarry supply of quarried stone 150-200 mm size for hand broken at source quarry boulder with minimum size of 300 mm for pitching at source quarry coarse sand i) at source coarse sand ii) at source fine sand at source quarry moorum at source quarry gravel/quarry spall at source quarry granular material or hard murum for gsb works at source quarry fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant filter media/filter material as per table 300-3 (mort&h specification) at crusher. close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher. close graded granular sub-base material 37.5 mm to 9.5 mm at crusher. close graded granular sub-base material 26.5 mm to 9.5 mm at crusher. close graded granular sub-base material 9.5 mm to 4.75 mm at crusher. close graded granular sub-base material 9.5 mm to 2.36mm at crusher. close graded granular sub-base material 4.75mm to 2.36mm at crusher. close graded granular sub-base material 4.75mm to 75 micron at crusher. close graded granular sub-base material 2.36 mm & below at crusher. stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher. coarse graded granular sub-base material 2.36 mm & below at crusher. coarse graded granular sub-base material 4.75 mm to 75 micron at crusher. coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher. coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher. coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher. coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher. coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher. coarse graded granular sub-base material 53 mm to 26.5 mm at crusher. aggregates below 5.6 mm at crusher. aggregates 22.4 mm to 2.36 mm at crusher. aggregates 22.4 mm to 5.6 mm at crusher. aggregates 45 mm to 2.8 mm at crusher. aggregates 45 mm to 22.4 mm at crusher. aggregates 53 mm to 2.8 mm at crusher. aggregates 53 mm to 22.4 mm(grade iii) at crusher. aggregates 63 mm to 2.8 mm at crusher. aggregates 63 mm to 45 mm (grade ii)at crusher. aggregates 90 mm to 45mm(grade i) at crusher. aggregates 10 mm to 5 mm at crusher. aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher. aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher. aggregates 13.2 mm to 5.6 mm at crusher. aggregates 13.2 mm to 10 mm at crusher. aggregates 20 mm to 10 mm at crusher. aggregates 25 mm to10 mm at crusher. aggregates 19 mm to 6 mm at crusher. aggregates 37.5 mm to 19 mm at crusher. aggregates 37.5 mm to 25 mm at crusher. aggregates 6 mm nominal size at crusher. aggregates 10 mm nominal size at crusher plant. aggregates 13.2/12.5 mm nominal size at crusher plant. aggregates 20 mm nominal size at crusher plant. aggregates 25 mm nominal size at crusher. aggregates 40 mm nominal size at crusher. crushing of stone aggregates (gsb crusher run) ac pipe 100 mm dia acrylic polymer bonding coat alluminium paint aluminium alloy plate 2mm thick aluminium alloy/galvanised steel aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm barbed wire bearing (cost of parts) bearing (cast steel rocker bearing assembly of 250 tonne ) road studs 100x100mm fitted with lense reflectors vide clause cl 804.2 of morth (5th revision) bearing (elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation) taking elastomeric bearing of size 500 x 400 x 96mm, overall volume=19200 cubic cm bearing (forged steel roller bearing of 250 tonne) bearing (pot type bearing assembly consisting of a metal piston supported by a disc, pt

State Government

CTN :45558189

22 Jun, 2026 NA

Chaibasa - Jharkhand

Tender For the quotation is invited to ascertain and assess the rate of materials as per with lowest market rate for framing of schedule of rate. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source, fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher., close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel, aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 tonne ), road studs 100x100mm fitted with lense reflectors vide clause cl 804.2 of morth (5th revision), bearing (elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation), taking elastomeri

State Government

CTN :45562939

22 Jun, 2026 NA

Hazaribag - Jharkhand

Tender For list of approved construction materials for the preparation of schedule of rates for the year 2026, basic rates of which to be approved by the state level schedule rate committee (materials should conform to relevant b.i.s., mord and mort&h specifications). the rates will be inclusive of royalty but exclusive of all taxes, g.s.t,overhead and contractors profit. "rates are at source"quarry/ crusher plant. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source, fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher., close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel, aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 tonne ), road st

Central Government / Public Sector

CTN :45380714

22 Jun, 2026 20.71 Lacs

Kollam - Kerala

Tender For supply of pneumatic and mechanical spares for indane bottling plant quilon -push in type straight connector 12 mm to 8 mm , quick exhaust with silencer 1 by 4 inch , exhaust air flow controller 1 by 4 inch , pu tube 4 mm 100m , pu tube 6 mm 100m , pu tube 8 mm 100m , pu tube 10 mm 100m , pu tube 12 mm 100m , limit switch long roller lever , knob 3 port valve pneumatic manual control valve one touch fitting 6mm to 6mm , 5 by 2 hand lever operated valve with detent with port size 1 by 8 inch , 5 by 3 hand lever operated valve with spring centered 1 by 4 inch exhausted , 5 by 2 hand lever operated valve with detent with port size 1 by 4 inch , 5 by 2 pneumatic pilot operated valve with port size 1 by 4 inch , 5 by 2 double pneumatic pilot operated valve port size 1 by 4 inch , 5 by 2 sov with coil 1 by 4 inch pneumax xmx5 , push button pneumatic relay mechanical valve 1 by 4 , or gate pneumatic port size 1 by 8 inch , and gate pneumatic with through hole mounting , valve for limit switch sv 3 m5 festo , pneumatic limit switch valve port g 1 by 4 inch with mounting for conveyor line , pneumatic delay timer valve festo vz3 pk3 , pneumatic timer , iso profile pneumatic cylinder 50dia x 80 mm , iso profile pneumatic cylinder 50dia x 100 mm , iso profile pneumatic cylinder 50dia x 160 mm , iso std. profile cylinder 50 dia x 300 mm , iso profile pneumatic cylinder 50dia x 320 mm, magnetic , iso profile pneumatic cylinder 50dia x400 mm , iso pneumatic cylinder 63dia x 50 mm , iso pneumatic cylinder 63dia x 75 mm , iso pneumatic cylinder 63dia x 100 mm , smc pneumatic cylinder cp96sdb40 300c , smc pneumatic cylinder cp96kdb40 400c , smc pneumatic cylinder cp96sdb50 50c magnetic , smc pneumatic cylinder cp96sdb50 300c 50x300 magnetic , smc pneumatic cylinder cp96sdb50 350c , smc pneumatic cylinder cp96sdb50 450c , smc pneumatic cylinder cp96sdb50 550c , smc pneumatic cylinder cd55b63 80m , norgren pneumatic cylinder pra 802050 m 450 , seal kit for 50mm dia pneumatic cylinder norgren part no pra 802050 m 450 , seal kit for 50mm dia pneumatic cylinder smc make , seal kit for 50mm dia pneumatic cylinder janatics make , seal kit for 63 mm dia pneumatic cylinder norgren make , seal kit for 63 mm dia pneumatic cylinder smc make , seal kit for 63 mm dia pneumatic cylinder janatics make , seal kit for 40mm dia pneumatic cylinder smc make , deadman switch janatics dp04sr61 , supply of pneumatic drag chain for conveyor with inner width 100 to 150 mm and inner height 30 to 50 mm , ucp 213 ntn bearing , ucp 212 ntn bearing , ucp 210 ntn bearing , bearing p212 , bearing p213 , nylon stopper roller with s.s bush fitti 80x40x28 , conveyor shaft with key dia 65mm length 850mm to 870mm key slot as per requirement material grade en8 9 as per ioc sample , head sprocket 14 teeth 65mm dia , tail sprocket 8 teeth , conveyor chain detachable type , chain pins , ms 2.5 mtr c channel for conveyor , twin arm stopper set with cylinder , stopper set arrow type right angle stopper , wt24-2x400 diffuse sensor sick , wl24x430 reflective sensor sick , wll24x430 optical sensor sick , sxe 9561 a86 00 solenoid valve with coil norgren , kosan loadcell flintec pc6 200kg , 40 mm bore ms idler shaft 500 mm , 40 mm bore ms idler shaft 400 mm , 40 mm bore ms idler shaft 380 mm , 40 mm bore ms idler shaft 350 mm , 40 mm bore ms idler shaft 300 mm , stud w nut is1363 cs m16x100mm , bolts allen head a193 gr b7 m6x30mm , m6 x 35 csk allen bolt and nut ht ms , bolt allen hd as is367 m8x30mm , m8 x 35 csk allen bolt and nut ht ms , bolt hexhd cs is 1367 m10x40mm , hex nut m10 is1367 //bid details 2 / 87 cl 4 , 12 mm x 40 mm nutwith double washer bolt , ss lock nut 6mm 40mm long nut and bolt , ss lock nut 8mm 40mm long nut and bolt , ms nut bolt for conveyor teflon , boom drive pinion , boom drive shaft , anchor bolt 10 x125 , anker bolt 12 x125 , anker bolt 16 x150 , dead weights pair , bend taper strip 90 deg cs conveyor inner 1550mm , bend taper strip 90 deg cs conveyor outer 1850mm

Central Government/Public Sector

CTN :45365852

20 Jun, 2026 40.00 Lacs

Kalimpong - West Bengal

Tender For repair to certain roads including road furniture at kalimpong mil stn under ge 867 ews - m&l for repairs to pot holes of depth exceeding 30 mm thick, area not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads , paths etc cutting around edges to at least 25mm in depth, and making good by applying tack coat with paving bitumen grade 10 pack primer (vg-10) @ 5kg per 10 sqm putting in premixed bituminous macadam, well rammed and sealed with binder with paving bitumen grade 30 pack (vg-30) @9.8 kg per 10 sqm blinded with 0.09 cum of stone chipping, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm, complete all as specified and directed., m&l for preparing existing black top road surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with bitumen primer using paving bitumen grade 10 pack (vg-10) @ 5kg per 10 sqm, complete all as specified and directed., m&l for premix bituminous macadam using paving bitumen of grade 30 pack (vg-30) @ 4% by weight of total mix laid / rolled and compacted to required gradient and camber with 8 to12 tonne power road roller and rolled to a uniform smooth surface (consolidated thickness 75 mm or less), complete all as specified and as directed., m&l for 40 mm thick consolidated thickness bituminous premixed carpet with 0.54 cu.m per 10 sqm of stone chipping and mixed with 29.20 kg per 10 sqm of binder using paving bitumen grade 30 pack (vg-30) laid and rolled with 8 to 12 tonne power road roller and compacted to required camber and gradient, complete all as specified and directed., m&l for liquid seal coat by applying paving bitumen of grade 30 (vg-30) @ 9.8 kg per 10 sqm blinded with 6.3 mm size stone chipping @ 0.09 cum per 10 sqm and rolled to a uniformed smooth surface by 8 to 12 tonne power road roller, complete all as specified and directed., providing and lying mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29 using approved coarse aggregates, fine aggregates filler materials and bitumen, prepared by using mastic cooker including cost and carriage of all ingredients, cost of heating aggregates and binder mixing in specified proportions conforming to approved job mix formula and laid to required level and slope after cleaning the surface, compacting, sealing the construction joints and surface finishing conforming to specifications including providing antiskid surface with bitumen pre-coated fine arraigned hard stone chipping of 13.20mm nominal size at the rate of 0.005 cum per 10 sqm and at an approximate spacing of 10 cm centre to centre in both directions, pressed into surface when the temperature of surfaces not less than 200c, protruding 1 mm to 4mm over mastic surface including the hire charges of all tools and plants and machinery, pay of operators, cost of fuel and lubricants and quality control all complete as per clause 516 of specification for road and bridge works of morth (5th revision). 25mm thick (pakur) vg-30 (po, 10/20 (p), complete all as specified and directed, supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed., supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with pama striplens reflector of model no. da 972.0 fixed with and incl ms stud of suitable size as per manufactures instructions and all as specified and directed., m&l for applying ther

Metal Stud Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Central Government / Public Sector

Central Government/Public Sector