Latest metallic chain Tenders | Government metallic chain Tenders

CTN :45512255

22 Jun, 2026 NA

Leh - Jammu And Kashmir

Tender For non skid chain , electric heating element , table top elevator , wpn tech spec chart , document storage chart

corporations/Associations/Others

CTN :45275457

18 Jun, 2026 NA

Virudhunagar - Tamil Nadu

Tender For corrigendum : procurement of 16 nos of rotary packer bucket elevator chain wheel rim on f.o.r. basis at alangulam cement works, virudhunagar district.

Corporations And Associations And Others

CTN :45488872

22 Jun, 2026 NA

Jalandhar - Punjab

Tender For supply of chain and chain spares - csm bhogpur, bagasse elevator chain & its spares, chain with case hardened, m.s roller, bush and pins for baggase elevator chain having attachment link at every 4th link., pitch 150 mm, side link as per drg. no.ce/mh/504 with test certificate from approved lab, bush as per drg no. ce/mh/504, roller as per drg no. ce/mh/504, pin as per drg.no ce/mh/504, outer link pin cut type as per drg.no. ce/mh/504, outer link pin size hole as per drg.no. ce/mh/504, inner link bush type (both sides) as per drg.no. ce/mh/504, side attachment link as per drg.no. ce/mh/504, cane carrier chain & its spares, cane carrier chain pitch -150mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no.mh pcc r1, pin as per drawing no. . mh pcc r1, bush as per drawing no. . mh pcc r1, roller as per drawing no. . mh pcc r1, outer link r.h as per drawing no. mh pcc r1, outer link l.h as per drawing no. mh pcc r1, inner link r.h & l.h as per drawing no. mh pcc r1, cane carrier slates as per drg no. mh-517, inter-rack carrier chain& its spares, inter rack carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, secondary carrier chain & its spares, secondary carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, csm nawanshahr, supply of secondary carrier chain spares as per drg. no. 183 r3material of side link en 45pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5 hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 60 ton, supply of cane carrier chain and spares as per drg. no. 216 r3material of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 40 ton, side link (fig no. 1), side link (fig no. 2), side link (fig. no. 3), roller (fig no. 4), pin (fig no. 5), bush (fig no. 6), slats (fig no. m- 316r), supply of rbc chains as per drg. no. m- 263rmaterial of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller - is 226-1975hardness = pin 50 + 5 hrc bush 40 + 5 hrc roller 30 + 5 hrcbreaking load = 60 tonsupply of spares for r.b.c. chain as per drg. no. m-263 r1, side link for bush (fig no. 1), side link (round hole) ( fig no. 2), side link (one side cut hole) (fig no. 3), side link for attachment ( fig no. 3 a), attachment no. m 111r2, roller (fig no. 4), bush (fig no. 5), pin (fig no. 6), rake (grill type) as per drg. m-111r3, pin for rake as per drg m-111r4, supply of forged link chain 229 mm pitch as per drg. no. m-305specification:material of forged block - en 30 bmaterial of pin & bush - 16ni3cr2pin hardness - 50 5hrcbush hardness - 40 5hrcbreaking load - 70 ton, csm batala, pin for rbc as per drawing no. bcsm/mh/01, bush for rbc as per drawing no. bcsm/mh/01, roller for rbc as per drawing no. bcsm/mh/01, pin for mbc as per drawing no. bcsm/mh/01, bush for mbc as per drawing no. bcsm/mh/01, roller for mbc as per drawing no. bcsm/mh/01, pin for elevator as per drawing no. bcsm/mh/01, bush for elevator as per drawing no. bcsm/mh/01, roller for elevator as per drawing no. bcsm/mh/01, pin for cane carrier as per drawing no. bcsm/mh/01, bush for cane carrier as per drawing no. bcsm/mh/01, roller for cane carrier as per drawi

Central Government / Public Sector

CTN :45420427

17 Jun, 2026 NA

Panipat - Haryana

Tender For supply of bearing unit ucp204 , housing and bearing t204 , housing and bearing ucfl205 , bearing ucf-206 , bearing uc-205 , bearing ucpa-205 , bearing ucp-207 , bearing with housing ucp212d1 , bearing 6000-llb-c3 , bearing 6005-2rs1 , bearing 6007-du , bearing 6013- zz , bearing 6200-2z , bearing 6201-2z , fan bearing 6202-2z , bearing 6205-2rs1 , bearing 6206 , gear for bag placer big , bearing 7204 , locktite 574 , grid bar outer chain grid , stop brush outer chain grid , bellow sucker singling out device , filter sucker opening unit , vacuum pipe 1 inch , pressure gauge -0 to 15 psi , coil indication and emc suppression module , 95.05. relay socket 250v 10a 2pole relay , rubber stop - stripper plate , door handle ss , magazine cover big , magazine cover small , cable cu 4cx2.5sq mm pvc ins shtd arm , spreader sprocket , positioning roller shaft , elevator drive spocket lock l-lock , spreader middle gear shaft , elevator drive sprocket guide teflon , stripper plate motor key , movable cable tray system- row pusher , row pusher up-down roller lock , timing belt for palletiser , timing sprocket , gear for bag placer-small , 3 way legris valve , driving belt row pusher c060019 , taper lock 25 mm , drive pulley of stitching machine , stitching machine motor pulley , orientation clamp angle 1 , orientation clamp angle 2 , orientation clamp base , grouping belt stud , stitching machine v belt cover , purging regulator genatics r13614 , magazine door hinge , spreader middle gear , spreader arm gear , stripper plate belt tightner bracket , swing arm fixing bracket , stitching machine base pin , conforming base plate , conforming back angle plate , elevator teflon guide , brg ball single row skf 6203 2rs 2z , outer chain with pin link , takeaway turning sprocket , stripper plate shaft with keys , row pusher shaft , outerchain shaft , big sprocket bearing type , big sprocket fix type , row pusher pulley shaft end , pulley row pusher motor end , clamping piece -toggle joint unit gusset gripper clamp , clamping piece - bag spreader clamp , swivel head- gusset gripper , bearing wheel - row pusher teflon g020002 , roller chain stainless steel infeed chain , metal guide , safety switch , non return valve-6 153463 , lithium battery cr2330 3v panasonic big , key way roller dia -65 , key way roller dia-80 , flat roller dia-65 isas arm , bag placer clamp , guiding stripper plate g070043 , guiding stripper plate g070044 , spreader hollow shaft ss , isas belt adjuster tightner , infeed chain coupling , seal kit vacuum pump pneumatic , cutter sov - janatics ds255sr61-w-24v dc indirect solenoid actuated spool valves 5 by 2 , outer chain full lock - half inch rolon or diamond , sm filter , stripper motor cover , double keyway roller dia 85 , drive roller dia-85 , ball bearing 608rs , fan motor , pressure switch- pneumatic smc , roller - conveyor r020036 , roller - conveyor r020017 , air jack - pneumatic v520019 rexroth r424b07296

Co-operative

CTN :45415201

10 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For fabrication and erection -replacement of the 2" x 2" square bar rails installed on the cane unloader. removal of the old juice gutter from 'a' mill, fabrication and installation of a new one, and conducting a successful trial run. removal of the old m.s. juice tray from 'a' mill, and fabrication and installation of a new one using m.s. plates. fabrication and installation of a new gear guard in the 'a' mill house. welding of worn-out teeth on the mill pinion as required, followed by grinding to a smooth finish. repair of damaged/worn parts of the tail bar coupling by welding as required, followed by grinding. repair of damaged/worn parts of the tail bar by welding as required, followed by grinding. comprehensive repair of the d.s.m. screen: cutting out and removing corroded sections, fabricating and fitting new replacements, repairing all internal piping, and conducting a successful trial run. thorough cleaning of the cane carrier slats, along with their attached links, pins, rollers, and bushes; followed by greasing and refitting said components into the slats in their proper positions. thorough cleaning of the slats, links, pins, bushes, and rollers of the primary/secondary cane carrier chains; followed by greasing, assembling the chain components, and preparing the chain as per instructions. fabrication and installation of juice rings for the rollers. fabrication and installation of mill bearing guards using 3 mm plates. fabrication and installation of m.s. scrapers for the under-feed rollers. cutting of chevron grooves into old mill rollers as required. cutting of chevron grooves into new mill rollers as required. creating 'dots' on the top and feed rollers of the mill using arc-welding electrodes, as per instructions. [repair/replacement of] m.s. components for the worn-out teeth of the under-feed rollers. cutting out patches from a plate and installing them as new teeth. performing arc welding on the grooves of rollers used in the mills using electrodes, as per instructions. fabricating side juice guards for mill rollers from 3 mm plates, as per instructions. fabricating an under-feed roller for the mill in accordance with the provided drawings. dismantling a damaged or defective juice tank in the mill house; fabricating and installing a new tank in its place, and conducting a trial run. replacing or repairing the damaged sections of a defective juice tank in the mill house. dismantling and replacing the bottom plate of a damaged or defective juice tank in the mill house. cane carrier / bagasse carrier / bagasse elevator / cross bagasse carrier / r.b. c. removal of the cane carrier side plate and installation of a new plate. a. welding or forging the enlarged pin holes in the links of the cane carrier, bagasse carrier, etc., to match the specific pin size. a. removal of broken runners from the cane carrier, inter-carrier, bagasse elevator, return bagasse carrier, or cross bagasse carrier, and installation of new runners in their place. a. removal of old, damaged cane carrier slats and installation of new slats. a. the task of drilling holes in new slats for the cane carrier and inter-carrier. a. straightening and repairing cane carrier slats as required. a. repairing damaged and weakened hoods of the cane chopper, cutter, and fibrizer in accordance with instructions. a. removal of old, damaged cane carrier slats; straightening the damaged slats; cutting out the damaged sections; and repairing them by welding in new or salvaged slat pieces cut to size, thereby restoring the slats to their proper dimensions. a. welding the enlarged holes in the inter-carrier links and re-drilling them to the correct size to match the rivets. a. filling the enlarged holes in old inter-carrier slats by welding, and subsequently re-drilling them to create new holes in accordance with the engineering drawings. a. removal of the damaged band from the inter-carrier clutch shaft, fabricating and installing a new one, and conducting a satisfactory

CTN :45275456

30 May, 2026 NA

Vellore - Tamil Nadu

Tender For supply of sugar bin elevator chain spares

CTN :45275460

30 May, 2026 NA

Vellore - Tamil Nadu

Tender For supply of sugar elevator chain spares - spares for sugar elevator chain as per drg.no.b 686/98 elevator outer link plate (detail-a), elevator outer link plate (detail-b), elevator outer link plate (detail-c), elevator inner link plate (detail-d), elevator pin (detail-e), elevator bush (detail-f)

Central Government/Public Sector

CTN :45163138

25 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of complete bearing housing with inner and outer bearing cover , spacer pulley inside part no bapl- 8060-01-11 , spacer pulley outside part no bapl-8060- 01-11 by 1 , bearing block for shaft part no. snh 513 masta 513-611 , bearing model no. 22213eak d1 , bearing block for shaft model no. snh 515 masta 515-612 , bearing, model no. 22215eak d1 , bearing block, model no. snh 517 , bearing, model no. 22217eak d1 , gear box m-series, part no. m-series, m0932200bxc , gear box m-series, triple reduction base mounted,part no. m-serie , gear box m-series, triple reduction base mounted, part no. m-ser , 2250x1250 mm only screen part no. js8909482249 , chp crusher motor mc pulley main roller , chp crusher motor pulley-motor shaft , chp recycle bucket elevator - be-1, tail drum pulley , chp product bucket elevator - be-2 tail drum pulley , chp vibrating screen 2-groove pulley at machine end , chp vibrating screen 2-groove pulley , chp vibrating screen unbalanced shaft with bearing set , duplex chain suitable for 19 teeth duplex sprocket , simplex chain suitable for 19 teeth simplex sprocket , duplex sprocket 19 teeth , simplex sprocket 19 teeth , carrying idlers rollers without frame 650 bw 89 dia , return idlers rollers without frame 650 bw 89 dia , impact idlers rollers without frame 650 bw 89 dia , non magnetic idlers rollers , guide rollers , full length conveyor belt bc-1 , recycle bucket elevator , product bucket elevator , elevaror belt for product bucket elevator , bucket hardware ) /bid number : gem/2026/b/7472114 * /dated: 12-05-2026 & & / bid document 1 / 28

CTN :45084864

23 May, 2026 30.0 Thousand

Muzaffarnagar - Uttar Pradesh

Tender For corrigendum : providing of custom bid for services - dismentling of bagasse elevator chain and keep seprate all spare at boiler no 3 work

Central Government/Public Sector

CTN :45203133

21 May, 2026 13.22 Lacs

Visakhapatnam - Andhra Pradesh

Tender For repair of bag house equipment in crmp- 1) cage repair( bending minor welding & painting), 2) cleaning and fixing of bags( opening the chamber, removing the venturies, taking out bags cleaning with and refixing) once in year, 3) cleaning of dust collecting hopper of bag house, 4) repair of dust hopper and its doors, 5) bag house screw conveyor body repair, 6) bag house screw conveyor hanger bearing with shaft changing, 7) bag house screw conveyor end bearing changing, 8) bag house screw conveyor coupling repairs, 9) bag house screw conveyor changing, 10) en masse conveyor drive sprocket changing, 11) en masse conveyor tail sprocket changing., 12) en masse conveyor drive chain fixing, 13) en masse conveyor links changing, 14) en masse conveyor drive unit coupling repair, 15) en masse conveyor drive chain rejointing in snap, 16) maintenance of rotary air locks (twice in a year), 17) bucket elevator belt rejointing in case of snap, 18) bucket elevator drive pulley changing, 19) bucket elevator boot pulley changing, 20) bucket elevator fallen buckets fixin, 21) pulse jet solenoid valves repair and maintenance, 22) drier maintenance in compressor house (4 driers), 23) maintenance of compressed air pipe line, 24) id fan casing removal and fixing back to faciltate for fan changing, 25) id fan casing cutting and fixing back during bearing changing, 26) id fan casing changing, 27) id fan casing repair work, 28) id fan suction duct patch work, 29) id fan delivery duct patch work, 30) to make arrangement for chimney cleaning on id fan delivery duct near chimney and duct opening and closing there.., 31) dust hopper gate replacement, 32) dust hopper vibrofeeder replacement, 33) dust hopper body repair patch work, 34) flexible hose to pulse jet replacement, 35) pulsing pipe changing, 36) pulsing pipe repair, 37) cyclone patch work, 38) flue gas duct leaks arresting patch works.

Metallic Chain Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Corporations And Associations And Others

Central Government / Public Sector

Co-operative

Central Government/Public Sector

Central Government/Public Sector