Web Analytics Made Easy - StatCounter

Meter Board Tenders

Get complete information related to latest Meter Board Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Meter Board Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Meter Board Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45713835 Due date: 18 Jul, 202618 Jul, 2026 30.00 Lacs
Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

CTN :45725993 Due date: 10 Jul, 202610 Jul, 2026 NA
Tender For 2026-2027 annual tender for street light materials (exept led lights) - tube light acessories, 40w tube light, 40w electronic choke, 40w starter, 40w t/l holder, street light fitting only, highmast light assessories, 150w hm lamp, 150w hm choke, 150w hm ignator, 150w hm condensor, 150w hm holder porclin, 250w hm lamp, 250w hm choke, 250w hm ignator, 250w hm condensor, 250w hm holder porclin, 400w hm lamp, 400w hm choke, 400w hm ignator, 400w hm condensor, 400w hm holder porclin, other items, 1/18 copper wire (flexible), 1/18 aluminum wire, 3/20 copper wire (flexible), 7/20 copper wire (flexible), 3/20 copper wire (vir), 4.00 sub cable wire, 10 mtr tape role, main switches 32/240 dp, fuse unit 32 /415 amps, fuse unit 63 /415 amps, fuse unit 100 /415 amps, aluminum stay heavy, aluminum stay light, pendent holder, 24x18 wood meter board, 3/4" street light pole clamp with bold nut, 3/4" street light pole clamp with bold nut (10x3.1/2), 3/4" street light bend pipe, 1" street light pole clamp with bold nut, 1" street light bend pipe, 1 1/4" street light pole clamp with bold nut, 1 1/4" street light bend pipe, no,12 copper stay wire (1kg), no,14 copper stay wire (1kg), no,18 copper stay wire (1kg), 1" gi 20 feet service pipe, 4000 w street light timer, 8000 w street light timer

CTN :45726003 Due date: 07 Jul, 202607 Jul, 2026 NA
Tender For 2026-2027 - annual tender for street light materials (except led lights) - tube light acessories, 40w tube light, 40w electronic choke, 40w starter, 40w t/l holder, street light fitting only, highmast light assessories, 150w hm lamp, 150w hm choke, 150w hm ignator, 150w hm condensor, 150w hm holder porclin, 250w hm lamp, 250w hm choke, 250w hm ignator, 250w hm condensor, 250w hm holder porclin, 400w hm lamp, 400w hm choke, 400w hm ignator, 400w hm condensor, 400w hm holder porclin, other items, 1/18 copper wire (flexible), 1/18 aluminum wire, 3/20 copper wire (flexible), 7/20 copper wire (flexible), 3/20 copper wire (vir), 4.00 sub cable wire, 10 mtr tape role, main switches 32/240 dp, fuse unit 32 /415 amps, fuse unit 63 /415 amps, fuse unit 100 /415 amps, aluminum stay heavy, aluminum stay light, pendent holder, 24x18 wood meter board, 3/4" street light pole clamp with bold nut, 3/4" street light pole clamp with bold nut (10x3.1/2), 3/4" street light bend pipe, 1" street light pole clamp with bold nut, 1" street light bend pipe, 1 1/4" street light pole clamp with bold nut, 1 1/4" street light bend pipe, no,12 copper stay wire (1kg), no,14 copper stay wire (1kg), no,18 copper stay wire (1kg), 1" gi 20 feet service pipe, 4000 w street light timer, 8000 w street light timer

State Government

CTN :45723767 Due date: 06 Jul, 202606 Jul, 2026 NA
Tender For deposit-dhq camp, thiruvananthapuram city- rewiring to duty office building, shifting of meter board and standardizing the panel board.-electrical maintenance-general electrical work

Central Government And Public Sector

CTN :45279869 Due date: 29 Jun, 202629 Jun, 2026 2.90 Lacs
Tender For bid to ras corrigendum : supply of service 11 kv ht panel as per sepcifications , sf new mineral oil for panel etc as per sepcifications , calibration relay etc as per sepcifications , replacement digital ammeter for ht panel , replacement digital voltmeter for ht panel , replacment ryb ind lamp led type in ht panel , sf 2a hrc fuselink in ht panel , servicing 1500kva dry type transformer as per sepcifications , servicing 2 runs 2500a tpn bustrunking as per sepcifications , service mv lt panel with 2500a 4p acb 3 nos as per specifications , service mvlt panel with mccb incoming as per specifications , checking and repair of em intelocking , dismentaling 3.5 sq mm 240 or 300 sq mm al cable as required , pf adaptor box aprx 1.5 ft x 1.5 ft x 1.5ft of 16swg ms sheet as reqd , pvdg panel module door key as reqd , pvd and fixing operating handle for 250a 4p changeover as reqd , replacement 160a hrc fuse with base in extg cap panel , replacement 3p 50kvar cap duty contactor in extg cap panel , replacement 25sq mm cu lead wire 1ft length in extg cap panel , checking etxg 2no 25kvar cap bank and fault repair reinstallation , dismentaling uv protection connections as reqd , replacement digital ammeter for lt panel , replacement digital voltmeter for lt panel , replacment selector switch in lt panel , replacment ryb ind lamp led type in lt panel , sf 2a hrc fuselink in lt panel , sf 32a hrc fuseling incl removing faulty item from lt panel as reqd , sf 63a hrc fuseling incl removing faulty item from lt panel as reqd , sf 100a or125a hrc fuseling incl removing faulty item from lt panel as reqd , sf 250a hrc fuseling incl removing faulty item from lt panel as reqd , sf new 5 or 6 amp piano switch in replacement of faulty item , sf new 5 or 6 amp 3pin socket outlet in replacement of faulty item , sf new 15 or 16 amp piano switch in replacement of faulty item , sf new 15 or 16 amp 6pin socket outlet in replacement of faulty item , rewinding ceiling fan motor , sf 4ft 20w led fitting against faulty fitting , service of 750kva dg set as per specification , service dgset control panel 1250a 4p acb as per specification , repacement ryb ind lamp in dg set panel , repacement digital ammeter in dg set panel , earthing testing in existing earth pits and report submission

CTN :45692588 Due date: 02 Jul, 202602 Jul, 2026 16.49 Lacs
Tender For water treatment plant cleaning,purchasing of equipments for wtp, laying of di pipes and sluice valves, construction of sv chamber and phed esr repairing for jamtara nagar panchayat. - labour for site clearance -do--e/i, desilting the supply well, intake well /head works, sump of water supply /sewerage works etc. in wet or dry condition including lifts upto 9 m and lead upto 150m as required beyond the work site,stacking, spreading, including necessary guarding, etc. complete, as directed by e/i, supplying and laying of rapid sand gravity filter sand, supplying and laying of rapid sand gravity filter gravel, supplying of bamboo for scaffolding works, supplying of narial ropes for binding works submersible pump set, requirement of plumber class-ii for opening & closing of valve & other related works, requirement of electrician grade-ii for making required connections & other related works, hiring of different tools,chain pulley & tackles for cleaning & other works, disposal of excavated earth & filter bed sand, sand (lead 02k+10p=12 km), gravel (22 k.m. lead), tyre coupling (unique 3409-gn tyre coupling for 100hp & 50hp), bosch lithium based grease, graphit gland pack rope 12mm, graphit gland pack rope 16mm, 2.2kw (3hp) foot mounted motor tefc 1500 rpm 3-phase motor for clariflocculator, multi-blade paddles mounted on central shaft driven by foot-mounted geared motor, onload changeover switch 800a,415v, 4 pole, digital voltmeter (0-500v)-3 phase indicator, digital ammeter (0-500a)-3 phase indicator, led indicator lamp or phase light (r/y/b/g), pvc/xlpe insulated pvc sheated heavy duty,armoured lt cable with aluminium conductor voltage upto and including 1100 v, 240sqmm, 3.5 core, 2.5 sqmm isi marked frls pvc insulated, single core copper conductor cable, 1.5 sqmm isi marked frls pvc insulated, single core copper conductor cable, laying of one number pvc insulated and sheated/xlpe power cable of 1.1kv grade of size not exceeding 35sqmm direct in ground including excavation, sand cushioning and refilling the trench, tapered bearing 7316 mcb (large), deep groove ball bearing 6311 mcb (small), chain pulley block hoist 5 tonne, 360 rotation, 3mtr lifting height, pipe wrench, 18 inch taparia adjustable heavy duty pipe wrench, pipe wrench, 14 inch taparia adjustable heavy duty pipe wrench, 1/2" sqaure drive flank drive taparia goti 22mm socket set, 1/2" sqaure drive flank drive taparia goti 20mm socket set, rachet wrench, 18 inch single sided rachet wrench, 1/2 inch drill bit for threading di/ci pipe, tata agrico hammer -dfs- 2.5kg, 6 inch tyton epdm/sbr rubber gasket for 150mm di pipe conforming to is:5382 isi mark, 4 inch tyton epdm/sbr rubber gasket for 100mm di pipe conforming to is:5382 isi mark, 6 inch di end cap flanged type for 150mm di pipe, 4 inch di end cap flanged type for 100mm di pipe, epdm rubber gasket for non-return valve, earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 150mm), earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 100mm), earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 100mm repair), earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches wit

CTN :45684150 Due date: 02 Jul, 202602 Jul, 2026 69
Tender For tender for supply of materials for maintenance and repair of drinking water plants in pallagatte gram panchayat limits under varga-1 grant for the year 2026-27 including sc and st reservation - gp/did/dwpl// 3/4 g_a elbow, gp/did/dwpl// 3/4 g_a caller, gp/did/dwpl// 3/4 g_a nipple 2 feet, gp/did/dwpl// 3/4 g_a nipple 1 feet, gp/did/dwpl// 3/4 g a elbow, gp/did/dwpl// 3/4 g a caller, gp/did/dwpl// 3/4 g a nipple 2 feet, gp/did/dwpl// 3/4 g a nipple 1 feet, gp/did/dwpl// electrical tape, gp/did/dwpl// 25 mm pvc tee, gp/did/dwpl// 75 mm pvc tee, gp/did/dwpl// 63 mm pvc tee, gp/did/dwpl// 75 mm pvc elbow, gp/did/dwpl// 63 mm pvc elbow, gp/did/dwpl// 25 mm pvc elbow, gp/did/dwpl// 75 mm pvc caller, gp/did/dwpl// 63 mm pvc caller, gp/did/dwpl// 25 mm pvc caller, gp/did/dwpl// 110 mm repair coupler, gp/did/dwpl// 90 mm repair coupler, gp/did/dwpl// 75 mm repair coupler, gp/did/dwpl// 63 mm repair coupler, gp/did/dwpl// 75 mm pvc ballwall, gp/did/dwpl// 63 mm pvc ballwall, gp/did/dwpl// 20 mm pvc ballwall, gp/did/dwpl// 25 mm pvc ballwall, gp/did/dwpl// 110 mm pvc pipe, gp/did/dwpl// 90 mm pvc pipe, gp/did/dwpl// 75 mm pvc pipe, gp/did/dwpl// 63 mm pvc pipe, gp/did/dwpl// 50 mm pvc pipe, gp/did/dwpl// 40 mm pvc pipe, gp/did/dwpl// 32 mm pvc pipe, gp/did/dwpl// 25 mm pvc pipe, gp/did/dwpl// 20 mm pvc pipe, gp/did/dwpl// 20 stage pump, gp/did/dwpl// 18 stage pump, gp/did/dwpl// 16 stage pump, gp/did/dwpl// 14 stage pump, gp/did/dwpl// 10/20 hp motor with pump, gp/did/dwpl// 10/18 hp motor with pump, gp/did/dwpl// 10/16 hp motor with pump, gp/did/dwpl// 7.5/18 hp motor with pump, gp/did/dwpl// 7.5/14 hp motor with pump, gp/did/dwpl// 7.5/16 hp motor with pump, gp/did/dwpl// starter lt/lk, gp/did/dwpl// panel board box, gp/did/dwpl// panel board, gp/did/dwpl// bore clamp, gp/did/dwpl// bore cap, gp/did/dwpl// rewinding copper wire, gp/did/dwpl// 4 sq mm mm aluminium wire, gp/did/dwpl// 10sq mm aluminium wire, gp/did/dwpl// 6sq mm aluminiun wire, gp/did/dwpl// 6 sq mm cable, gp/did/dwpl// 4 sq mm cable, gp/did/dwpl// 2.5 sq cable, gp/did/dwpl// indicator, gp/did/dwpl// voltmeter, gp/did/dwpl// ammeter, gp/did/dwpl// relay, gp/did/dwpl// fuse (63a), gp/did/dwpl// preventer, gp/did/dwpl// auto starter, gp/did/dwpl// 10x140 stud ss, gp/did/dwpl// milak paper, gp/did/dwpl// thrust bearing set, gp/did/dwpl// gap washer, gp/did/dwpl// oilseal

CTN :45685955 Due date: 02 Jul, 202602 Jul, 2026 69
Tender For tender for supply of drinking water motors and pipeline repair materials in diddige gram panchayat - gp/did/dwpl// 3/4 g_a elbow, gp/did/dwpl// 3/4 g_a caller, gp/did/dwpl// 3/4 g_a nipple 2 feet, gp/did/dwpl// 3/4 g_a nipple 1 feet, gp/did/dwpl// 3/4 g a elbow, gp/did/dwpl// 3/4 g a caller, gp/did/dwpl// 3/4 g a nipple 2 feet, gp/did/dwpl// 3/4 g a nipple 1 feet, gp/did/dwpl// electrical tape, gp/did/dwpl// 25 mm pvc tee, gp/did/dwpl// 75 mm pvc tee, gp/did/dwpl// 63 mm pvc tee, gp/did/dwpl// 75 mm pvc elbow, gp/did/dwpl// 63 mm pvc elbow, gp/did/dwpl// 25 mm pvc elbow, gp/did/dwpl// 75 mm pvc caller, gp/did/dwpl// 63 mm pvc caller, gp/did/dwpl// 25 mm pvc caller, gp/did/dwpl// 110 mm repair coupler, gp/did/dwpl// 90 mm repair coupler, gp/did/dwpl// 75 mm repair coupler, gp/did/dwpl// 63 mm repair coupler, gp/did/dwpl// 75 mm pvc ballwall, gp/did/dwpl// 63 mm pvc ballwall, gp/did/dwpl// 20 mm pvc ballwall, gp/did/dwpl// 25 mm pvc ballwall, gp/did/dwpl// 110 mm pvc pipe, gp/did/dwpl// 90 mm pvc pipe, gp/did/dwpl// 75 mm pvc pipe, gp/did/dwpl// 63 mm pvc pipe, gp/did/dwpl// 50 mm pvc pipe, gp/did/dwpl// 40 mm pvc pipe, gp/did/dwpl// 32 mm pvc pipe, gp/did/dwpl// 25 mm pvc pipe, gp/did/dwpl// 20 mm pvc pipe, gp/did/dwpl// 20 stage pump, gp/did/dwpl// 18 stage pump, gp/did/dwpl// 16 stage pump, gp/did/dwpl// 14 stage pump, gp/did/dwpl// 10/20 hp motor with pump, gp/did/dwpl// 10/18 hp motor with pump, gp/did/dwpl// 10/16 hp motor with pump, gp/did/dwpl// 7.5/18 hp motor with pump, gp/did/dwpl// 7.5/14 hp motor with pump, gp/did/dwpl// 7.5/16 hp motor with pump, gp/did/dwpl// starter lt/lk, gp/did/dwpl// panel board box, gp/did/dwpl// panel board, gp/did/dwpl// bore clamp, gp/did/dwpl// bore cap, gp/did/dwpl// rewinding copper wire, gp/did/dwpl// 4 sq mm mm aluminium wire, gp/did/dwpl// 10sq mm aluminium wire, gp/did/dwpl// 6sq mm aluminiun wire, gp/did/dwpl// 6 sq mm cable, gp/did/dwpl// 4 sq mm cable, gp/did/dwpl// 2.5 sq cable, gp/did/dwpl// indicator, gp/did/dwpl// voltmeter, gp/did/dwpl// ammeter, gp/did/dwpl// relay, gp/did/dwpl// fuse (63a), gp/did/dwpl// preventer, gp/did/dwpl// auto starter, gp/did/dwpl// 10x140 stud ss, gp/did/dwpl// milak paper, gp/did/dwpl// thrust bearing set, gp/did/dwpl// gap washer, gp/did/dwpl// oilseal

Central Government And Public Sector

CTN :45252739 Due date: 01 Jul, 202601 Jul, 2026 3.45 Lacs
Tender For corrigendum : supply of metal meter board , switch gear , indicationlamps , elcb , porcelain fuse , neutral link , al ug cable 50 sq mm , al ug cable 50 sq.mm , end termination gland , pipe earthing , 6swg gi wire , gi pipe , change over switch

CTN :45646820 Due date: 29 Jun, 202629 Jun, 2026 NA
Tender For corrigendum : annual tender for 2026-27 street light material supply in achirapakkam town panchayat - 40 watts fl tube light, 40wattsvpitcopperchoke, 40watts starter, side holder, street light aluminium fittingwithchokes,bulb& starter, 1*40 street light accessories, 1*40 w street light fitting cover, 1*40w sideholderbase, 20 wled 4feet tube light fittings, 24 w led 4feet tube light fittings, 28 w led 4feet tube light fittings, 30 w led 4feet tube light fittings, 36 w led 4feet tube light fittings, 40 w led 4feet tube light fittings, insulationtaperoll, 7/16 pvc insulated copper wire, 7/20 pvc insulated copper wire, 3/20 pvc insulated copper wire, 1/18 pvc insulated copper wire, 25 sqare mm 3 ½ “ ug cable, 50 sqare mm 3 ½ “ ug cable, hook up wire (patty wire), 2 core service wirw, 1/18 aluminum wire, 3/20 aluminium wire, 7/20 aluminium wire, 7/18 aluminium wire, 7/20 gi wire (service wire), 16 amps fuse unit, 32 amps fuse unit, 63 amps fuse unit, 100 amps fuse unit, 200 amps fuse unit, 500 amps fuse unit, "16amps dp switch with metal clad(fronthandle)", "32amps dp switch with metal clad(fronthandle)", "16amps dp switch with metal clad(sidehandle)", "32amps dp switch with metal clad(sidehandle)", "100amps tpn switch with hrc fusessheet steel double break", "125amps tpn switch with hrc fusessheet steel double break", "200amps tpn switch with hrc fusessheet steel double break", "315amps tpn switch with hrc fusessheet steel double break", "400amps tpn switch with hrc fusessheet steel double break", "16amps tpn metal clad swtich with re-wirable fuse units", "32amps tpn metal clad swtich with re-wirable fuse units", "63amps tpn metal clad swtich with re-wirable fuse units", "100amps tpn metal clad swtich with re-wirable fuse units", "200amps tpn metal clad swtich with re-wirable fuse units", procelain holder, peengan holder gls holder, "5000 w street light automatic on/offswitch iso:9000 – 1 set.", timer auto set, 1” pvc wiring pipe, 1”pvc wiring bend, 32mm service pipe set, 40w tl fitting street light clamp set, cable tag, e.b.rccpoleclampsetwithbolts&nuts1set, bi-metalicclamp3/20, bi –metalicclamp7/20, chokescrew, dbswitch, 25 ams bch contact set, eb service g.i box, g.i switch box (service box ), wooden plank for meter board, wooden plank for ariel board, 3/4” g.i bended pipe (suitable for led fitting), 1” g.i bended pipe for (suitable for led fitting), 1 ¼” g.i bended pipe (suitable for led fitting), 2.5 sq.mm 3 core copper flat cable, 4 sq.mm 3 core copper flat cable, 6 sq.mm 3 core copper flat cable, 10 sq.mm 3 core copper flat cable, 16 sq.mm 3 core copper flat cable, 20 w led street light fittings, 25 w led street light fittings, 30 w led street light fittings, 40 w led street light fittings, 45 w led street light fittings, 48w led street light fittings, 60 w led street light fittings, 70 w led street light fittings, 72 w led street light fittings, 80w led street light fittings, 120 w led street light fittings, 150 w led street light fittings, "70 w led street light fittings withdimmable driver", "72 w led street light fittings withdimmable driver", "90 w led street light fittings withdimmable driver", 120 w led street light fittings with dimmable driver, 150 w led street light fittings with dimmable driver, 100 w led flood light with dimmable driver, 120 w led flood light with dimmable driver, 150 w led flood light with dimm11864able driver, 200 w led flood light with dimmable driver, 100w led flood light with integrated driver, 120w led flood light with integrated driver, 150w led flood light with integrated driver, 100w led high bay lights fitting, 150w led high bay lights fitting, 200w led high bay lights fitting, "120w : 6500k : led ip65 : solar streetlight fitting", "40w : 12.8v : ip65 havells street lightfitting", "40w : 6500k , 10000mah : 10w panel :ip66 sensor type", "60w : 6500k , 15000mah : 15w panel :ip66 sensor type", "100w : 6500k , 20000mah : 18w panel :ip66 sensor type", 25 w led driver, 25 w mcpo cp w
 Loading, Please wait...

Connect us via What's Up