Latest meter reading item Tenders | Government meter reading item Tenders

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

Central Government/Public Sector

CTN :45279872

15 Jun, 2026 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For corrigendum : supply of 0.5 ltr. single filter part no f7482200 , banjo bolt for fuel pipes part no f3131415 , washers for banjo bolt part no f4930430 , s a of fuel pipe-feed pump to filter part no b7008903 , return hose 3 8 inch- 5.5 mtrs. part no f1930260 , s a of fuel pipe filter to fip part no b7008903 , coil type filter element part no p1301540 , sealing ring part no p1301807 , oil filter part no b7015403 , slinger part no f1134350 , seal sub assy. coolant pump part no b7016003 , s a of vane coolant pump part no b7016004 , v belt part no f0330950 , alternator part no f7482000 , starter motor12v-lucas tvs part no f7481900 , inn. cartridge comp. part no 9095 1011 01 , air filter element part no 9095 1009 01 , strainer part no 1612 0604 00 , flex. tube-tank to lift pump part no 0574 9712 37 , engine oil pressure gauge part no 0873 0608 02 , air pressure gauge part no 1619 5268 00 , comp. temp. gauge part no 9095 5771 00 , hour meter part no 9095 6906 00 , key switch ignition part no 9095 6907 00 , copper tube part no 9095 6898 00 , button-stop cable part no 9718 2168 00 , stop cable part no 9095 7202 00 , temperature gauge water part no 1619 1637 00 , battery -12 v - 85 ah part no 9095 5540 00 , battery cable part no 1614 0866 02 , battery cable part no 1614 0866 01 , hose clip part no 0347 6113 00 , hose xa 140 part no 9095 7178 04 , hose xa 140 part no 9095 7178 03 , hose xa 140 part no 9095 7178 05 , separator element oil part no 9095 7345 00 , oil filter part no 1613 6105 00 , flexible hose part no 9095 7059 00 ) /bid number : gem/2026/b/7570394 * /dated: 21-05-2026 & & / bid document 1 / 31

corporations/Associations/Others

CTN :45296255

15 Jun, 2026 6.55 Lacs

Anpara - Uttar Pradesh

Tender For corrigendum : tender for supply of cell connector for 48 v (type-yhp-13/opzs-200p) (275mmx38mmx3mm) with two holes (as per sample) , cell connector for 220 v , lead coated nut & bolt size 10x50 , seperator for lead acid plante battery , vent cap for lead acid plante battery , cell connector for 220v , , expanded type m.s. wire mesh of size 1.5x2.00mm crossed wire section , phg v belt a 84 , v belt c 112 , v belt b 134 , v belt a 65 , v belts b 91 , v belt a 54 , phg v belt a 77 , v belt b 83 , ss wire meshmesh size 120 micronwidth 1.0 meter , ss wire mesh mesh size 1/1mm 28 gauge width 1.0 meter purpose , elements of discharge strainer for srw pump

CTN :45514404

23 Jun, 2026 NA

Kutch - Gujarat

Tender For supply of chromium guard , m seal compound 100 gm , ptmtjet spray with 1 mtr tube , pvc bib cock 15 mm , pvc connection 15x450mm long complete with nut bolt and washer , pvc solution for joints 500 gm , pvc tee equal 110mm , pvc toilet seat cover for ewc , pvc towel rail 24 inches 600mm , pvc waste coupling 40mm , pvc waste pipe corrugated 32 x 900 mm long , pvc waste pipe flexible 32mm 1150 mm , syphon kit for flushing cistern , upvc inner socket 20mm , upvc inner socket 25mm , upvc outer socket 15mm , upvc outer socket 20mm , upvc outer socket 25mm , upvc reducer 15x20mm , upvc reducer 20x25mm , upvc t socket 20mm , upvc t socket 25mm , upvc tee equal 25mm , upvc union 20mm , upvc union 25mm , cp stop valve 15mm , handles alluminum d type anodized 75mm , hinges steel 50mm , cp pillar cock 15 mm , ptmt or pvc nipple 15x100mm , ptmt or pvc nipple 15x150mm , ptmtor pvc nipple 15x75mm long , ptmt or pvc nipple 20x100mm , ptmt or pvc nipple 20x150mm , ptmt or pvc nipple 25x100mm , ptmtor pvc nipple 25x150mm , ptmt jet spray with 1 mtr tube , wash basin 550 x 400 mm , pvc pipe 20 mm 10 mtr long , bib cock brass 15 mm , ball valve high pressure ptmt or pvc withapoxy coated aluminium rod 20 mm , pvc elbow 15 mm , pvc elbow 20 mm , pvc elbow 25 mm , brass jumper valve fitting 15 mm , gi union 40mm , gi tubing 20mm medium grade , ball valve pvc heavy duty 25mm , gi union 25mm , gi tubing 25mm medium grade , gi tubing 50mm medium grade , gate valve ci 15 mm , cable pvc frlsh copper conductor single core 2 point 5 sqmm , cable lugs alumn 120 sqmm , cable lugs alumn 185 sqmm , cable lugs alumn 240 sqmm , cable lugs alumn 25 sqmm , cable lugs alumn 300 sqmm , cable lugs alumn 35 sqmm , cable lugs alumn 70 sqmm , cable lugs alumn 95 sqmm , cable pvc 3 core copper wire 1 point 5 sqmm , capacitor 2 point 5 mfd , capacitor 4 mfd , energy meter smart single phase 20 amp , switch socket combination piano type 16 amp 2 in 1 , switch socket combination piano type 6 amp , fuse wire 18 gauge , pvc cable flexible copper wire twin core of size 14 0 point 0076 , pvc cable pvc single core 1 point 5 sqmm copper conductor , pvc cable aluminium service 2 core 6 sqmm , pvc casing caping doubl locking 32 mm , pvc flexible copper cable single core 0 point 75 sqmm , pvc flexible copper cable single core 2 point 5 sqmm , pvc service cable 2 core aluminium conductor 2 point 5 sqmm , regulator for fan 2m , prelaminated particle board 8 feet x 4 feet x 18mm , plywood commercial 8 feet x4 feet x6mm , screw wood steel 25mm x 7g , plywood commercial 8 feet x feetx12mm , plywood one side teak face 8 feet x 4 feet x 12 mm , prelaminated particle board one side teak face 8 feet x4 feet x18mm , nails wire 50mm 8g , cane 2 mm , ahndle aluminium d type anodised 100 mm , plywood one side teak face 8 feet x 4 feet x 6 mm , screw wood steel 65 mm 6g , screw wood steel 60 mm x 12 mm , screw wood steel 75 mm x 12 mm , beading teak wood 18x4 mm

CTN :45509948

24 Jun, 2026 70.00 Lacs

Gandhinagar - Gujarat

Tender For supply of electro-mechanical & instrumentation items for mass balancing reservoir (mbr- supply of pump starter panel including individual vfd for 125 kw (02w+1s), supply of 1.1 kv grade cable- aluminium conductor supply, laying, testing & commissioning 1.1 kv grade, xlpe insulated, stranded aluminium conductor cables, a) 3.5 c x 185 sq.mm, b) 3.5 c x 300 sq.mm, 1.1 kv grade, xlpe insulated, stranded copper conductor, galvanised steel flat strip / round wire armoured, extruded pvc type st2 sheathed, heavy duty cable, a) 3 c x 2.5 sq.mm, supply of gi perforated type cable trays with returned edge / flange, fabricated from 2.0 mm thick sheet steel in the standard length of 2.5 mtrs, duly hot dipped galvanized after fabrication as per is 2629-1989 / is 4759-1984 including accessories such as coupler plates/ fish plates, bends, tees, reducers, elbows, covers and electro-galvanized hardware etc, erected on existing support as per specification, a) 450(w) x 75(h) x 2.0 mm thick, b) 300(w) x 35(h) x 2.0 mm thick, c) 100(w) x 35(h) x 2.0 mm thick, mechanical items, supply of di pipes k-9, dia 500mm, di fittings 500mm, , , , , , for 300 mm dia butterfly valve, for 500 mm dia butterfly valve, for 600 mm dia butterfly valve, instrumentation items, non-return valve 300 mm dia, , , , supply 10cx 1.5 sq.mm signal cable, supply 1px 1.5 sq.mm signal cable, supply 2cx 1.5 sq.mm signal cable, supply horizontal end suction pump 780m3/hr @40m head, impeller: ss, shaft: ss, casing: ci including pumps with mechanical seal. 120 kw 2w+ 1s, supply of 1/2" pressure gauge 0-10 bar,, supply of butterfly valve, supply of electric actuator, supply of electromagnetic flow meter 500 mm dia, supply of expansion bellow, supply of pressure transmitter, 0-7 kg/cm2,, supply of zero velocity valve 500mm dia

CTN :45484021

09 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For supply of driver of 5 pieces 100 mm to 300 mm , soldering iron 125watt 230volt , temperature controlled soldering 50 watt 230 volt iron , i motor pump set 1 hp 1 phase 240 v , cabinet dryer electrical , pipe bending machine hydraulic type 12mm to 30mm , industrial sewing machine , fuel injection pump ve pump distributor fuel rotary pump dpc , phase sequence indicator 3 phase 415 v , pipe threading die with handle ratchet type die head of 12 34 and 1 , tachometer digital photo sensor type 10000 rpm , screw driver insulated 6mm 150 mm diamond head , punch centre 10 mm 150 mm , micrometer inside with extension rods accuracy 001 mm with extension rods up to 150 mm , steel measuring tape 20 mts , hacksaw frame fixed type 300 mm , dial gauge type 1 gr a complete with clamping devices and with , h washing machine semi automatic 5 kg , safety harness , auto darkening welding helmet , inverter with battery 1kva , depth micrometer 025mm accuracy 001mm , motorised bench grinder 1 hp 3 phase 440vdia150 mm , battery charger 0 6 9 12 24 48v 30amp , air ratchet with standard accessories , safety belt standard quality , drilling machinebenchtodrill up to 12mm dia along with accessories , electrical test bench , cutting knives , pocket steel tape 6 long , measuring tape 30m , measuring steel tape 15m , pliers round nose 15 cm , spoons wooden ladle , face shield , moisture box aluminium 100gm capacity , cleaning tray 45 30 cm , spanner t flocks for screwing up and upscrewing inaccessible , wheel barrow , spade , pocker , hacksaw frame fixed 150 mm , piston ring compressor , electric testing screw driver , connecting screw driver 100 mm , rotary switch 16 a440v , ph meter rod , lead light , chisels cross cut 200 mm 6mm , tweezers 100 mm , induction cooktop with following feature , glass rod , bradawl , circlip pliers expanding 15cm and 20cm , number punch 6 mm , desiccator , pipe cutting tool up to 5cm dia , chamois , electric iron automatic 750 w 240 v , belt sander narrow surface , trowelbrick 10 25cm long , pipe cutter wheel type 6 mm to 25 mm , digital vernier caliper universal type 0 150 mm lc 005 mm , heat sealing machine handpedal operated , feeler gauge 20 blades metric , screw pitch gauge metric 025 to 6 mm , beaker 50 100 250 ml 500 ml , pliers side cutting 15 cm , sleeve drill morse 0 1 1 2 2 3 3 4 4 5 , hydrometers of different ranges 030 3060 6090 brix , grease gun 05 ltr capacity , portable sanding machine 600w , water purifier ro and uv technologies , ph meter digital , hand rubber gloves tested for 5000 v , earth clamp , portable electric drill machine 15 mm drill bit capacity , measuring cylinder 100mi250ml 200 ml 500ml , pliers round nose insulated 100 mm , hammer extractor type250 grams , pipe flaring tool , thermostat , particle masks , soldering iron changeable bits 15w , spanner adjustable drop forged ss 150 mm , professional air blower power consumption 820 w , plier side cutting 200mm , washing machine automatic , microwave oven , pliers flat nose insulated 200 mm , utility knife , e ac ceiling fan and ac table fan 68 watt 230 v each , electric mixer , lugs for cable , pully puller with 3 legs 300mm , rheostat sliding type 0 25 ohm 2 amp , temperature gauge range 0 to 150 c , rheostat sliding type 0 1 ohm 10amp , conical flask 50 100 250ml 500ml , shredder for slicing of fruit and vegetable capacity 5kghrs , torque wrenches 535 nm , chisel cold round nose 9 mm 100 mm , weighing balance digital , electric soldering iron 35 w , rheostat sliding type 0 10 ohm 5 amp , impact wrench 1 to 2 inch drive , plier flat nose 150 mm , digital vernier caliper 0 150mm least count 002 , measuring tape (v3) (q3) //bid details 2 / 81

corporations/Associations/Others

CTN :45492320

25 Jun, 2026 23.31 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of vdc mv o p 4 20ma , digital energy meter connection 3 phase 3 wire ct ratio 10000 5 amp pt ratio 1575 kv 110 v50 hz acc class 2s make seccure apex 150 , transformer pt 415v 110v , portable digital megger test voltage , thermal o l relay mn2 4 2 to 7 5a , thermal o l relay 2 5 4 amp , dc clamp meter dc current 0 1a to 200a ac current 0 1a to 200a dc ac voltage 0 1v to 600v continuity data hold fa make motwane , control transformer t 1 input voltage 0 440v output s1 0 110 220 and s2 0 110 220 as per sample rating 50va , control transformer t 2 input voltage 0 440v output 0 18 24 as per sample rating 50va , heating element of esp hopper 0 5kw , transformer oil drum 210 lit , dehy breather for hvr transformer of esp , buchholz relay type gor 1 with alarm trip contact 1no plus 1nc , magnetic oil gauge with one tripping contact , prismatic oil level indicator size 150mmx60mm , glove valve size 25mm brass both side flange end , crc contact cleaner 300 ml cane , neoprene rubber sheet 1x2mtr thick 10mm , aluminium lugs 70sq mm als 226 e bolt hole 13mm make dowells , aluminium lugs 185 sq mm als 235 e bolt hole 17mm make dowells , aluminium lugs 120sq mm als 230 e bolt hole 13mm make dowells , aluminium ferrule 120sq mm make dowells , aluminium ferrule 150 sq mm make dowells , copper ferrule size 185 sq mm make dowells , copper ferrule size 120 sq mm make dowells , push button on off with element , hrc fuse3na 7805 orc 16 a make siemens , hrc fuse3na 7820 orc 32 a make siemens , mccbn 16r 150a 3p , ns type fuse 32 amp , ns type fuse6 amp , ns type fuse 25 amp , on delay timer 0 5 sec to 100 hours 24 240v ac dc , local remote switch 25a 440v brand kaycee siemens havell l t , voltmeter sel switchmodel srp1373way off , din type fuse rating 100 a , din type fuse rating 125 a , hrc fuse t a 32 rated for 32 amp code no sfb 8116032 , pin type insulator 0 4kv , petroleum jelly for battery , din type fuse hrc size 3 current rating 500 amp , rectifier fuses 150 amps semiconductor type , led indication lamp red yellow blue green 220v ac dc , dd module 236 amp 1000piv , dd module 260 amp 1600piv , dd module 70 amp 1000piv , mccb 150a 3 pole , motor cooling fan with cover for 2 2 kw gt cooling fan motor , control fuse ns type 2amp , control fuse ns type 4 amp , control fuse ns type 6 amp , din type hrc fuse 25a 415v ac size 00 , din type hrc fuse 32a 415v ac size 00 , din type hrc fuse 63a 415v ac size 00 , analogue ac voltmeter range 0 500v , analogue ac voltmeter range 0 500v ptr 415 110 v , analogue ac ammeter range 0 50 amp ctr 50 , dc voltmeter moving iron jewel bearing range accuracy , ammeter range 0 15amp ctr 15 1 , moving iron analog ac ampere meter ct ratio 400 5a d , d c ammeter moving coil range , ac ammeter range 0 25amp , aux contactor 2no plus2nc coil voltage 24v ac , aux contactor 3no plus1nc coil voltage 24v ac , switch disconnector fuse unit 2pole current carrying capacity 315 amp max operating voltage 600 v 50hz for one to one replacement , power contactor 3pole current carrying capacity 315amp max operating voltage 600v coil voltage 220 250vac 50hz dc for one to one replacement , local remote selector switch 10a model type 2s26b or equivalent for one to one replacement , ammeter rotary switch 12a r y b off 4 position 90 degree , voltmeter selector switch 12a ry yb br off , local remote selector switch 3 pole2 way without off 16 amp , tnc rotary switch 25amp spring return to neutral model type , switch //bid details 2 / 59 fuse unit 63a 3p , switch fuse unit 125a , thermal overload relay

CTN :45415159

15 Jun, 2026 4.58 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : repair and maintenance of tube wells and boosters including repair of water level gauge, ms panel, sluice valves and allied items of civil / electrical at various buildings i.e. punjab raj bhawan, haryana raj bhawan & residence sector-7, under maintennace booth, sector-7, chandigarh. (ch to: 2216 (np) mtc. and repair ) - repair of ci sluice valve up to 150 mm dia including dismantling, repair / replacement of spindle, nut , rubber packing, nuts and bolts complete., up to 100 mm dia, lifting and lowering of submersible pump set including dismantling of flenged joints, taking out column pipes, re-jointing etc including replacement of defective packing, nuts and bolts etc complete, tube well, booster, supplying and fixing of single phase preventor make minilec or equivalent model of approved make to the satisfaction of eic , supplying and fixing of current transformer ( ct ) for ampere meter of suitable rating complete., supplying and fixing of overload relay of following capacities, 14 to 23 amp, 30 to 42 amp, 45 to 75 amp, providing and fixing of star delta starter timer of make l&t or equivalent model of approved make to the satisfaction of eic, providing and fixing of kit kat 500 amp complete in all respect, supplying and fixing of capacitor of 20 to 50 mfd make l&t, siemens or equivalent model of approved make to the satisfaction of eic , supplying and fixing of analog meter of make l&t ( rishabh ) or equivalent model of approved make to the satisfaction of eic , volt meter, ampere meter, supplying and fixing of 3 pole mccb of following capacity of make l&t, bch, havells or equivalent model of approved make to the satisfaction of eic , 100 amp, supplying & fixing of contactors block of make l&t, bch or equivalent model of approved make to the satisfaction of eic , mnx - 25, mnx - 32, mnx - 50, mnx - 70, supplying and lowering of submersible cable 16mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , supplying and lowering of submersible cable 25mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , providing and fixing hydro pneumatic pump of size 0.5 hp of approved make with 24 ltr capacity tank, pressure switch, pressure gauge, nrv accessories and making connections complete of make crompton or equivalent model of approved make to the satisfaction of eic, repair and rewinding of submersible pump set including carriage from installation to workshop and back. the rate include replacement of all defective parts of pump and motor rewinding., 5 hp, 7.5 to 10 hp, 35 hp to 55 hp, repair and rewinding of monoblock submersible pumping set including repacement of defective parts as required and carriage from installation to workshop and back., 0.5 h.p, 1 h.p, 2 h.p, manufacturing, supplying and fixing of ms control panel 16 gauge of size 600x700mm with door including wiring of inside panel, complete in all respect, providing and fixing of self pumping monoblock single phase pump for boosting of make crompton or equivalent model of approved make to the satisfaction of eic, 0.5 h.p, 1 h.p, 2 h.p, providing and fixing of pressure gauge make h-guru or equivalent model of approved make to the satisfaction of eic, providing and fixing of elcb 63 amp make l&t/havells or equivalent model of approved make to the satisfaction of eic, repair of internal control wiring 1.5mm wire with thimbles, nut bolt etc. complete

corporations/Associations/Others

CTN :45495363

23 Jun, 2026 3.60 Lacs

Villupuram - Tamil Nadu

Tender For supply and delivery of kitchen equipments for amma unavagam in villupuram municipality - supply and delivery of steam boiler with stand & burner water capacity 250 liters, operated by both lpg and fire wood, outer shells 8mm ms plate, inner shells 14 g (2.5mm thickness) 304 grade ss with 10 g (3mm thickness) 304 grade ss sheet, automatic float valve assembly, safety valve, pressure gauge meter, water level indicator, drainage valve, flame sensor, rubber gasket for inner vessel lid, ms stand 45x45x6mm angle, high pressure burner, ncv with fittings for lpg and chimney 10 feet.(to generate steam) , steam generator (m.s outer :28 dia x 45 h, s.s inner 17 dia x 35 h) , m.s.fire bar stand , 6 " dia ms smoke pipe (3feet) , supply and delivery of rice vessel 25 kgs capacity, operated on steam made out of 14 g (2.5mm thickness) 304 ss sheet, lid and tilting handle, side support ‘u’ clamp, unloadable by tilting the handle, mounted on a type tubular ss stand 6mm thickness, ss flat with lick rod.(rice cooking & mu ltipurpose vessel) , supply and delivery of dhal vessel 25 kgs capacity, double jacketed, made out of 14 g (2.5mm thickness) 304 grade ss sheet with lid, tilting handle, side support ‘u’ clamp safety valve, steam trap, unloadable by tilting handle, mounted in a type tubular ss stand 6mm thickness ss pipe, ss flat with lock rod.( size 16" dia x 16 h , 50 ltrs to make dhal without mixing steam in dhal) , supply and delivery of single burner cooking range size : 24”l x 24”b x 18”h, top : 304 grade 16 g ss sheet, frame : 32x32x6mm ms angle, covering : 20 gauge ss 304 grade sheet four sides, pan support : 1 no cast iron grid, burner : 1 no, t 35 high pressure burner lpg with fittings, ncv : 1 no, legs : 1 ½” 16 g ss 304 grade pipe legs with adjustable nylon bullet legs.(for cooking purpose) , supply and delivery of double burner cooking range size : 48”x27”x16”, top : 304 grade 16 g ss sheet, frame : 32x32x6mm ms angle, covering : 20 gauge ss 304 grade sheet four side, pan support : 2 nos cast iron grid, burner : 2 nos, t 35 high pressure burner lpg with fittings, ncv : 2 nos, legs : 1 ½” 16 g ss 304 grade pipe legs with adjustable nylon bullet legs. , supply and delivery of idly cooking unit, ss vessels, plastic materials, mixie, tilting grinder, pulvariser grinder and other equipments , ss rice karandi, big size , ss sambar karandi, big size , ss water drum 50 litres capacity , ss water jug , ss plates, round plain , ss tumblers, with curved edges, 300 ml capacity , mobbu , plastic tray , plastic pot , plastic mug , plastic drum, 50 litres , plastic container (10 litres , plastic muram , plastic stool medium , cloth mat , hot box , mixer heavy duty 1 hp, 3 jar , tilting grinder 15 litres capacity , wall clock , supply and delivery and fixing of r.o plant isi make, with control panel, sand filter vessel, carbon filter vessel, 10 micron filter, 4 membrane, 4 membrane housing, 10 filter housing, 2 pressure gauge, booster pump (cri), 2 vessel valve, pebbles as required , gst. 18% (cgst-9%, sgst-9%) , , , , , ,

State Government

CTN :45482296

13 Jun, 2026 49.9 Thousand

Nadia - West Bengal

Tender For notice for the vbgram materials supply - supply of first aid box including medicines (specified by pia) at, model citizen information board for ibs( specification-made of, with a height of 3ft, width 2ft and thickness of 4 inch & 30 degree, head with pentagonal shape including fixing the mgnrega, biswa bangla logo in upper side of the board and supply in, mgnrega worksite anywhere., model citizen information board for community (specification-, of brick structure with plastering and colour ( back colour, and black for writting) with a height of 4ft, width 3ft and thickness, 4 inch & 30 degree in head with pentagonal shape including fixing, the mgnrega and biswa bangla logo in upper side of the board, supply in the mgnrega worksite anywhere., g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., other local wood, supplying, fitting & fixing factory made p.v.c. door frame of size, mmx47 mm with a wall thickness of 5 mm, made out of extruded, mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china foot rests 250x125x25 mm, ptmt - towel rail (600 mm), fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, hydraulic door closer tuular type aluminium section body, anodiesd aluminium hanging type door stopper, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated, factory made solid panel pvc door shutter consisting of outer, made out of m.s. tubes of 19 gauge thickness and size 19 mmx19, mm for styles, top and bottom rails, m.s. frame shall have cost, steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame, made of flat bent bar, end bifurcated with necessary screws etc., cement concrete(1:2:4) as per direction. (cost of concrete will be, paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured, from extruded section conforming to i.s. specification (i.s. 205/66), and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x, 4.0mm, anodised aluminium barrel / tower / socket bolt (full covered) of, approved manufactured from extruded section conforming to i.s., 204/74 fitted and fixed with cadmium plated screws: (vi) 200mm, long x 10mm dia. bolt., anodised aliminium d-type handle of approved quality, manufactured from extruded section conforming to i.s. specification, (i.s. 230/72) fitted and fixed complete: (a) with continuous plate, base (hexagonal/ round rod) (iii) 100 mm grip x 12 mm dia rod., (c) supplying 6 levers 'godrej' crystal satine mortice lock with keys, including fitting & fixing complete., i) iron hasp bolt of approved quality fitted and fixed complete, (oxidised) with 16mm dia rod with centre bolt and round fitting. (, 200mm long, door stopper.(brass), red lead primer for steel grill, interior premium imulsion(plastic paint), exterior imulsion weather coat paint, distemper paint, supply of upvc pipes (b type) (for soil pipe purpose) & fittings, conforming to is-13592-1992 (a) (i) single socketed 3 meter length, (c) 160 mm, (ii) plain tee for soil pipe purpose. (c) 160 mm, v) plain y for soil pipe purpose. (c) 160 mm, supplying, fitting & fixing upvc down pipes a- type and fittings, conforming tois:13592-1992 with all necessary clamps nails,, including making holes inwalls, floor etc. cutting trenches in any soil, through masonry concrete, structures etc if necessary and mending good damages including, joining withjointing materails (spun yarn, valamoid/bitumen/m-seal, etc) complete. a) upvc pipes: (ii) 110 mm. dia., s, d) shoe (ii) 110 mm. dia, qgs seed(10 variety), g.i. hollow pipe squre or

Meter Reading Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

State Government