Latest micro drill machine Tenders | Government micro drill machine Tenders

State Government

CTN :40279010

16 Jun, 2025 193

Bengaluru - Karnataka

Tender For e- tender for supply of spine, fms other implants high end - frame plate 3d (micro plates 0.2mm - 0.8mm), dermal matrix wound dressings size 10x25cm, dermal matrix wound dressings size 10x12.5 cm, dermal matrix wound dressings size 5x5 cm, jess fixators for hand fracture, suture anchors (for tendon achilles repair), rack for 8 instruments with clamp box, instrument case 130 x 230 x 25mm, micro scissors straight scissor blade 10mm, forceps with plateau tip 0.3mm smooth, micro forceps with plateau tip 0.6mm angulated, micro scissors curved - scissor blade 10mm, double clamps 24mm, 1.5 - 2.3mm vessel, double clamps 16mm, 1.0 - 2mm vessel, double clamps -11mm, 06-1.4mm vessel, single clamps 24mm, 0.6 - 1.4mm vessel, single clamps 16mm, 0.6 - 1.4mm vessel, microvascular single clamps 11mm, 0.6 - 1.4mm vessel, calcaneal fracture fixation plate and screws, lisfranc plate and screws, first 1st mtp fusion plate and screws, lapidus fusion plate and screws, mini tight rope for mallux valgus, ankle fusion plates, fibre wires, achilles tendon repair by speed bridge, foot plates, memory staples, tenodesis screws, syndesmosis repair with tight rope, suture anchors for brostrum repair, internal brace for brostrum repair, deltoid ligament repair using suture anchors, deltoid ligament repair with internal brace, autocart - all autologous cartilage regeneration, suture anchors for achilles tendon 5.5 mm double loaded with needles, extra osseous talotarsal stabilization (eotts) implant (sinus tarsi screw), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (large 2mm to 2.8mm), a)10 hole continuous plate (large 2mm to 2.8mm), a)6 hole with gap (large 2mm to 2.8mm), a)4 hole with gap (large 2mm to 2.8mm), a)3 hole with gap (large 2mm to 2.8mm), a)2 hole with gap (large 2mm to 2.8mm), h plate (large 2mm to 2.8mm), l plate right and left (large 2mm to 2.8mm), titanium strut plate 18 hole (large 2mm to 2.8mm), double y plate (large 2mm to 2.8mm), y plate (large 2mm to 2.8mm), a)20 holes adaptation plate (large 2mm to 2.8mm), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (medium plates 1mm-2mm), a)10 hole continuous plate (medium 1mm to 2mm), a)6 hole with gap (medium 1mm to 2mm), a)4 hole with gap (medium 1mm to 2mm), a)3 hole with gap (medium 1mm to 2mm), a)2 hole with gap (medium 1mm to 2mm), h plate (medium 1mm to 2mm), l plate right and left side (medium 1mm to 2mm), titanium strut plate 18 holes (medium 1mm to 2mm), x plate (medium 1mm to 2mm), double y plate (medium 1mm to 2mm), y plate (medium 1mm to 2mm), a)20 holes adaptation plate (medium 1mm to 2mm), orbital mesh (0.2- 0.4mm), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (micro plates 0.2mm - 0.8mm), a)10 hole continuous plate (micro plates 0.2mm - 0.8mm), a)6 hole with gap (micro plates 0.2mm - 0.8mm), a)4 hole with gap (micro plates 0.2mm - 0.8mm), a)3 hole with gap (micro plates 0.2mm - 0.8mm), a)2 hole with gap (micro plates 0.2mm - 0.8mm), titanium strut plate 18 holes (micro plates 0.2mm - 0.8mm), x plate (micro plates 0.2mm - 0.8mm), double y plate (micro plates 0.2mm - 0.8mm), y plate (micro plates 0.2mm - 0.8mm), a)20 holes adaptation plate (micro plates 0.2mm - 0.8mm), orbital rim (micro plates 0.2mm - 0.8mm), deformity reduction set, cobalt chromium rods 5.5 mm x 400 mm, mis battery or manual operated disc aspirator 1-2.5 mm, with 0.5 mm increment 13 - 19 gauge with 2mm increment straight or curved, anterior peek cervical standalone cage, intergrated peek cage with titanium screw locking mechanism 6mm-12mm length, self locking screw mechanism, 35 degree screw angulation cephedal to caudal, self drilling screws 3.5mm, 4mm, mis polyaxial set scerw accomadating 5.5mm rods, mis contoured or straight rods dia 5.5mm with sharp edge for edge for easy insertion, mis polyaxial screw with attachment option of plastic retractor for direct imaginga and visualization of rod, modified design for set screw insertion dia 5 t

Central Government/Public Sector

CTN :40501448

06 Jun, 2025 1.80 Lacs

Dhanbad - Jharkhand

Tender For for 32mm hole drilling in boulders formed at departmental ocp of akwmc , katras area, bccl .

corporations/Associations/Others

CTN :40473812

11 Jun, 2025 NA

Sangareddy - Telangana

Tender For auction sale of 33 kv sf6 circuit breaker panel along with 1250a busbar,pneumatic forge hammer 580kg,column drilling machine,horizontal machining centre,laser iii axis m/c,polyol reacter/ blender,vertical boring and turning m/c,lt pannel board 2500a,33/11ka transformer kirloskar make,lt transformer,battery operated power pallet truck 02 ton capacity including battery,hmt cnc turning centre m/c model stc-25,hmt cnc turning centre m/c model tmc-500,pillar mounted jib crane,vertical milling m/c,universal tool presetting m/c,voltas diesel fork lift truck 2t capacity,battery operated platform truck 2t cap,isdn exchange,ht/lt eqpt in type 4 area,ht/lt eqpt,ht/lt eqpt in type 3 sub stn,provision sub stn equipment,t-off switch 11 kva 350 mva 400a capacity,lt panel board 1000aacb 800a with switch,transformer 11kva/433v 500 kva cap,t- off switch rotary 400a-350mva,lt panel comprising,transformers,provision of ht/lt equipment,54-m-90032 storage system heavy duty,radial drilling m/c,cnc spark erosion machinery,deep hole drilling m/c,stem drilling m/c,facing and centering-drilling m/c,double ended pedastle grider,hydraulic surface grinding m/c

Central Government/Public Sector

CTN :40449544

12 Jun, 2025 NA

Ahmedabad - Gujarat

Tender For supply of automatic gasket micro-drilling machine as per attached specifications

Central Government/Public Sector

CTN :40447016

13 Jun, 2025 70.8 Thousand

Betul - Madhya Pradesh

Tender For supply of soil investigatigation kudmud 28ed oem - making 150mm nominal dia bore hole , carrying out soil test , bulk density and moisture content test , triaxial shear test , bearing capacity of soil and suggested foundation test , nature of soil test , preparation of report , mobilization and demobilization of drilling equipment and shifting

CTN :40255639

05 Jun, 2025 NA

Kanchrapara - West Bengal

Tender For supply, installation, testing and commissioning of single phase 1.5 ton capacity super efficie nt 5 star rated inverter (variable speed) based split type green air -conditioner with eco-friendly refrigerant conforming to is 1391 (part-2):1992 or latest, copper coil for both odu and idu, copper refrigerant pipe of 3 mtrs. (min.) between idu and odu, having features like indoor temperature indicator, auto air swing and various cooling modes viz. turbo mode, dry mode, sleep mode etc. the unit should have wireless type rem ote control with battery. the scope of installation and commissioning also covers drilling hole in the wall, m ounting of indoor and outdoor unit, laying and connection of refrigerant pipe, checking and charging of refri gerant gas, suitable electric wiring between indoor unit and switch- socket. (make:- toshiba, panasonic, dai kin,hitachi, blustar or similar) [ warranty period: 30 months after the date of delivery ]

CTN :39038241

06 Jun, 2025 10.88 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, machine tools & equipment foran international standard itotin mechanic diesel engine (md) tradeat iti bardoli, gujarat, india (package 3: mechanic diesel - files assorted sizes and types including safe edge file(20nos), flat file, second cut, flat file, bastard, grease gun, grease gun heavy duty trolley type, growler, hacksaw frame, hammer ball peen, hammer chipping, hammer copper with handle, hammer mallet, hammer plastic, hand operated crimping tool, hand vice, hollow punch set of seven pieces, insulated screwdriver, insulated screwdriver, left cut snips, magnifying glass, oilcan, philips screwdriver set of 5pieces, pipe cutting tool, pipe flaring tool, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, engine wire harness connected complete with electrical equipment, diesel fuel quality test equipment set, training setup for adas systems, 4-wheel alignment set & hoist with advanced driver assistance systems (adas), training system for sensors in motor vehicles, training system for the basics of pulse generation and ignition in vehicles, training system: common rail diesel injection system, batterycharger, car jet washer with standard accessories, chain pulley block capacity with tripod stand, compression testing gauge suitable for diesel engine with standard accessories, connecting rod alignment fixture, cylinder liner-dry& wet liner, press fit & slide fit liner, different type of engine bearing model, different type of piston model, fuel feed pump for diesel, fuel injection pump (diesel)inline, fuel injection pump dismantling toolkit /universal vice, fuel injection pump ve pump/ distributor fuel rotary pump (dpc) pumps, glow plug tester, injectormulti hole type, pintle type, injector cleaning unit, injector testing set (hand tester), oil pump for dismantling and assembling., piston ring compressor, piston ring expander and remover., piston ring groove cleaner., radiator cut section-crossflow, radiator cut section-downflow, radiator pressure cap, tandem master cylinder with booster, turbo charger cut sectional view, water pump ford is mantling and assembling, workbench with bench vice and storing drawers, arbor press hand operated 2-ton capacity, drilling machine bench to drill, dual magnetization yoke, grinding machine pedestal (general purpose), hydraulic jack, pipe bending machine (hydraulic type), pneumatic rivet gun with standard accessories, tin smiths bench folder, trolley type portable air compressor, special tools and equipment, hydraulic vertical honing machine for engine cylinder and brake bore, pneumatic valve seat grinder and lapping kit, intercooler cut model assembly with air filter & housing assembly diesel engine, work benches with bench vices and storage draws to demonstrate machines, belt tensioner gauge, granite surface plate with stand and cover, marking out table, multi scan tool, spring tension tester, ammeter dc with external shunt, cylinder bore gauge, dc ohmmeter, depth micrometer, dial gauge, multimeter digital, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, sheet metal gauge, straight edge gauge (2ft.), straight edge gauge (4ft.), surface gauge with dial test indicator plunger type, tachometer (counting type), telescope gauge, temperature gauge with sensor, thermostat, timing lighter, tyre pressure gauge with holding nipple, vacuum gauge, vernier calliper, wire gauge(metric), hydrometer, engineers stethoscope, drill twist (various sizes), hand reamers adjustable, drill twist(assorted), set of stock and dies with die stock-metric, taps and dies complete sets(5types), steel rule, caliper inside with spring, caliper outside with spring, dividers with spring, engineers square, feeler gauge 20blades (metric), hand shear universal, bench lever shears, air blow gun with standard accessories, air ratchet with standard accessories, air impact wrench with standard accessories, angle

Central Government/Public Sector

CTN :40362759

06 Jun, 2025 NA

Medak-T - Telangana

Tender For supply of short hole drilling holder dia 20.0 insert type drill or equivalent dr020-040-25-06/dr200-40-25-06-2

Central Government/Public Sector

CTN :40363538

05 Jun, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply of title - autocad design software including specification toolsets modules of designing software: structure design, electrical design, general design type of edition of the offered product: commercial edition name of software :autocad, single user; name of the oem: autodesk oem model software version/date of launch of version: 2024 or latest types of licence subscription duration of subscription (in years): 3 oem licensing; number of years for oem support for updating (patches and bug fixes): 3 number of years for oem support for upgradation of version is included. , power contactor 4 pole 200amp, 1000 vac, coil voltage 415 vac,2no +2nc aux.contacts, with surge suppressor, as per serial no 3,and item no k-01, of bill of material of rdso spec no rdso/pe/spec/ac/0184-2015 rev.1 used for feeder contactor net 1,net 2, suitable for lhb type ac coaches switchboard cabinet [k-01] make- abb af190b-40-22, schneider lc1d1150046n5+ la4da2n + ladn22, siemens 3rt13636ar36, l&t mcx-34. firm should submit certificate of authorization from oem & test report. , supply & fixing of klcr boxes & fixing of klcr relays in asm office. it includes supply of any minor bracket, nuts, bolts, teakwood, sun mica, lock, drilling hole etc as directed by engineer at site. it also includes supply and wiring of push buttons along with leds for klcr circuit. rly will supply only klcr relays and contractor has to wire klcr relays. it includes supply of all the related wiring material , electric track bonding machine with suitable horizontal stand with attachments to drill holes of various sizes up to 7mm to 13mm/110ac) , dropout delay time relay, ars time vs-24-240 v, antiskid 0.5 second to 10 minute, 7 times range as per l&t part no. 23gdt0 or abb cat no. ars-21. procurement to done through oem or their authorize dealer only. note: sample to be approved before bulk supply. , all in one pc intel core i5/amd r5 with x86 processor, 21.53 monitor, 16gb ram, 500gb ssd, windows professional edition, tpm chip required for bit locker disk encryption , all in one desktop computer i5, 8gb ram, 3 year warranty, original microsoft, latest model, ups-1 kva(make - microtek) with 3 year warranty oem , supply, installation and commissioning of computerized slack adjuster barrel (sab) test bench specification and term condition attached as per annexure attached. , automated and computerized single wagon test rig for all types of wagons along with test bench as per attached specification & condition. , manual projector screen size 6 x 8 self locking with installation , optical time domain reflectometer (otdr) suitable for 1310/1550nm fiber as per specification (make viavi, exfo, yokogawa, fujikora, sumitomo, siemens). , exide car battery (70ah, 12v) ey 700l with replacemet of the old same