Latest micro pulse lider Tenders | Government micro pulse lider Tenders

Central Government/Public Sector

CTN :40484969

17 Jun, 2025 NA

Varanasi - Uttar Pradesh

Tender For igbt based 3-phase drive propulsion system with composite converter for wap-7 as per rd so specification no. rdso/2008/el/spec/0071, rev.5 (propulsion equipment except traction converter) an d clw specification no. clw/es/3/ig/0/0518 alt. c (traction converter having hlc part of rating 2x600kva for wap-7) for complete three phase wap-7 locomotive along with physical medium i.e. esd/emd/ofg for multi functional vehicle bus (mvb) to inter-connect all the bus stations as per iec-61375, terminal bracket s, bus bar links and copper braids required for connection between main transformer and traction convert ers, auxiliary converters, interfacing connectors, cables and cable looms with connectors required for co nnection from vcu1/2 to sb1/2 panel, traction motor speed sensors, complete assembled and wired panel c fitted with driver display unit(s) and interface for both cab, as per following specifications: (i)rdso/2008 /el/spec/0071,rev.5 for igbt based 3-phase drive propulsion equipment except traction converter (ii) cl w/es/3/igbt/0518 alt. c for composite converter (iii) clw/es/3/0528 alt-a for tm speed sensor for igbt t raction converter (iv) clw/es/3/0138 alt-a for copper braid (v) clw/es/3/0458 alt.e for control cables (v i) clw/es/3/0459 alt.c for screened cables (vii) clw/es/3/0124 alt.'o' for set of connectors. (viii) clw/e s/3/0240 alt-b for panel c (without diagnostic terminal). (ix) rdso modification sheet no. rdso/2012 /ms/0413 rev 1 (x) rdso modification sheet no. rdso/2020/el/ms/0482, rev'1' (xi) rdso modificati on sheet no. rdso/2017/el/ms/0457 rev-0 (xii) all the relevant rdso modification sheets applicable for the sub-components of igbt based 3-phase drive propulsion equipment should be implemented. in add ition to above description, the propulsion system with composite converter should also co mply requirement mentioned in "schedule of requirement" (sor), copy attached with tender documents. warranty period: 72 months from the date of supply. [ warranty period: 72 months after th e date of delivery ]

corporations/Associations/Others

CTN :39731070

24 May, 2025 NA

Nashik - Maharashtra

Tender For bid to ras supply of electronic lab equipment - cathode ray oscilloscope , smd rework station and tools , digital lcr meter , dc regulated power supply , soldering clamp holder , stereo microscope , illuminated stand magnifier , esd safe electronics rework table , esd safe chair

State Government

CTN :40237563

30 May, 2025 NA

Chamba - Himachal Pradesh

Tender For corrigendum : tender for supply of equipment materail design erection testing and commisioning for providing sop to jsv by providing aug of existing 25 kva sstn singnahar to 63 kva aw providing 1phase ld system to jsv main storage in es pukhri under esd koti - 1-ph lt line on st poles with acsr conductor (0.545 km) -supply part, steel tubular poles 8 mtr. long, muff for steel tubular pole with concrete filling, acsr conductor 6/1/2.59, 30 sq.mm, gi wire 8 swg, lt stay set complete, egg insulator (lt), shackle insulator (16kn) (recd-3/761)(iss no 1445/1977), d-iron (u-clamp), nuts and bolts offsizes, aluminium paint, red oxide paint, full clamp, earth knob, lt earthing set complete, spiral pvc spacer (1-phase, 1-ph lt line on st poles with acsr conductor (0.545 km) -erection part, steel tubular poles 8 mtr. long, muff for steel tubular pole with concrete filling, acsr conductor 6/1/2.59, 30 sq.mm, gi wire 8 swg, lt stay set, egg insulator (lt), stay wire (7/10 swg), shackle insulator (16kn) (recd-3/761)(iss no 1445/1977), d-iron (u-clamp), nuts and bolts offsizes, aluminium paint, red oxide paint, full clamp, earth knob, lt earthing set complete, spiral pvc spacer (1-phase, transportation charges ( mechanical transportation+manual carriage for avg lead 2 km), augmentation of existing 11/0.4 kv 25 kva s/stn singnahar to 63 kva in section pukhri-supply part, 11/0.4 kv, 63 kva distribution transformer ( outdoor type) from approved vendor of hpsebl, acsr conductor 6/1/3.35, 50 sq.mm, pipe earthing set i/c coal, charcoal, salt, surge arrester, 9 kv station class (porcelain type), muffs with concrete filling for existing poles in structire, lt distribution panel box with mccb for 63 kva dtr, aluminium paint, lt pvc cable 3.5 core 120 sq. mm, prov. hp make aiq desktop model hp 200 g4 with intell core 3-10110u-10 gen, processor, 8 gb ddr ram expendable up to 16 gb, itb, hdo(t2qorpm)2st antiglare led display with fhd (1920x1060) integrated hd graphics & webcam, 2xusb, 3.0 2xusb, 2.0 cardreader. audio part vgnhdmi/dp port10x100, 1000mcomdilant lan usb keyboard & mouse internalspl. connectivity bo2 11b/g/n/ac pl windows etec. with three years onsite warranty (ii) 650va offline ups system with 12vx7ahx2nos. 158vah/smf battery to provide 20 min. battery backup with three year warranty on ups and battery (iii) cannon/hp laser printer preferably lbp 2900b or hp mfp 1126nw, augmentation of existing 11/0.4 kv 25 kva s/stn singnahar to 63 kva in section pukhri-erection part, 11/0.4 kv, 63 kva distribution transformer ( outdoor type) from approved vendor of hpsebl, acsr conductor 6/1/3.35, 50 sq.mm, pipe earthing set i/c coal, charcoal, salt, surge arrester, 9 kv station class (porcelain type), muffs with concrete filling for existing poles in structire, lt distribution panel box with mccb for 63 kva dtr, aluminium paint, lt pvc cable 3.5 core 120 sq. mm, transportation of distribution transformer ( new capacity dtr from road site to site of work & dismanteled from site of work to road site) a/w mechanical transportation to and from final location

State Government

CTN :40335365

30 May, 2025 NA

Chamba - Himachal Pradesh

Tender For corrigendum : tender for supply of equipment material design erection testing and commissioning for sop to phc bhageigarh by providing 100 kva sub station along with 11 kv ht line in section nakror under esd hpsebl tissa

CTN :40392663

28 May, 2025 NA

Kharagpur - West Bengal

Tender For supply, installation and commissioning of 01 set of esd safe lab equipment consisting of foll owing items :- 1) programmable dc power supplies (hsn code : 8504409540) model-1743b or similar techn ical specification, make-b & k precision or tektronix or hantek input-115 to 230 vac +/- 10%, 50/60hz, out put- variable 0 to 35 v dc at 0 to 6 amps capacity qty . :- 01 no. 2) multi range programmable dc power s upplies (hsn code : 8504409520) model-9206 or similar technical specification, make-b & k precision or te ktronix or hantek input-110 /220 vac (+/- 10%) , 47 hz-63 hz, output- variable 0 to 150 v dc at 0 to 3 am ps capacity with cover qty. :- 01 no. 3) digital storage and mixed signal oscilloscopes (hsn code : 8504409 520) model-2567 or similar technical specification, make-b & k precision or tektronix or hantek channel-4, bandwidth-200mhz, sampling rate-2gsa/s, maximum input voltage-1 mohm : <400 vpk; 50 ohm: <5 vrm s dc gain accuracy +/-3%, 5 mv/div to 10 v/div +/- 4% : <2 mv/div. qty. :- 01 no. accepted make/brand: b&k precision or similar. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40257744

17 May, 2025 16.22 Lacs

Dalhousie - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing commissioning for sop to jsv for lis kakdolu by prov. 11/.4 kv 100 kva s/stn. a/w 11 kv ht/lt line , in section maredi under esd chamba-ii ed chamba

State Government

CTN :40257745

17 May, 2025 20.10 Lacs

Dalhousie - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing commissioning for sop to jsv for prov. 11/.4 kv 100 kva s/stn. at chalunj nallah in gp ghulai a/w 11 kv ht line , in section tarella under esd tissa ed chamba

Central Government/Public Sector

CTN :40187784

22 May, 2025 NA

Chennai - Tamil Nadu

Tender For supply of spare module assembly - flexlite series red 0.25 mm hook up wire, 23 awg, 19/0.127 mm, 100m, etfe insulation, flhtc0311-0.25-2 , flexlite series black 0.25 mm hook up wire, 19/0.127 mm, 100m, etfe insulation, flhtc0311-0.25-0 , flexlite series yellow 0.25 mm hook up wire, 23 awg, 19/0.13 mm, 100m, etfe insulation , flexlite series green 0.25 mm hook up wire, 23 awg, 19/0.127 mm, 100m, etfe insulation , flexlite series blue 0.25 mm hook up wire, 23 awg, 19/0.127 mm, 100m, etfe insulation, flhtc0311-0.25-6 , red 0.5 mm harsh environment wire, 0.18 mm, 100m, polymer insulation, 10060111-0.50-2 , flexlite series black 0.5 mm high temperature wire, 19/0.19 mm, 100m, etfe insulation, flhtc0311-0.50-0 , flexlite series white 0.5 mm equipment wire, 20 awg, 19/0.19 mm, 100m, polyolefin insulation , transparent acrylic resin conformal coating, 200 ml aerosol, -55c min, +130c max , -heat shrink cable markers, white, pre-printed ""d"", 26mm cable, trsa 1019/e/1/d , -heat shrink cable markers, white, pre-printed "i", 26mm cable, trsa-1019/e/1/1 , heat shrink cable markers, white, pre-printed ""n"", 26mm cable, trsa-1019/e/1/n , -heat shrink cable markers, white, pre-printed "e", 4 ? 12mm cable, trsa-1019/g/1/e , heat shrink cable markers, white, pre-printed ""f"", 4? 12mm cable, trsa-1019/g/1/f , heat shrink cable markers, white, pre-printed "g", 4?12mm cable, trsa-1019/g/1/g , -heat shrink cable markers, white, pre-printed "j", 4? 12mm cable, trsa-1019/g/1/j , -heat shrink cable markers, white, pre-printed "l", 4 ? 12mm cable, trsa-1019/g/1/l , heat shrink cable markers, white, pre-printed "n", 4? 12mm cable, trsa-1019/g/1/n , heat shrink cable markers, white, pre-printed ""0"", 4?12mm cable, trsa-1019/6/1/0 , heat shrink cable markers, white, pre-printed ""t"", 4? 12mm cable, trsa-1019/g/1/t , -heat shrink cable markers, white, pre-printed "u", 4? 12mm cable, trsa-1019/g/1/u , -heat shrink cable markers, white, pre-printed ""v"", 4? 12mm cable, trsa-1019/g/1/v , -heat shrink cable markers, white, pre-printed ""w"", 4 12mm cable, trsa-1019/g/1/w , -heat shrink cable markers, white, pre-printed "x", 4? 12mm cable, trsa-1019/g/1/x , red male banana connectors, screw termination, 16a, 50v, copper plating , black male banana connectors, screw termination, 16a, 50v, copper plating , green male banana connectors, screw termination, 16a, 50v, copper plating , blue powder-free nitrile disposable gloves, size medium, 100 per pack , active gear v100 safety glasses, clear pc lens , pozidriv; slotted screwdriver set, 6-piece , steinel hg2320e 650c max corded heat gun, type g-british 3-pin , chipquik cq2lf 10ml lead free solder flux pen, -weller 6966e 427c max corded heat gun, type f-schuko plug , sam nut driver set, 3.5 mm, 4 mm, 5.5 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm tip , itt cannon hand ratcheting crimp tool for trident connector contacts , daniels manufacturing m22520/7-01 hand ratcheting crimp tool frame , -daniels manufacturing, m22520/7-06 positioner , hand ratcheting crimp tool frame for datamate connector contacts , harwin 1 way positioner , -tweezers e-z pik 9 pc , 4-piece network installer tool k , esd safe-flux bottle , fiber optic cable strippering tool , smart tweezers (lcr meter) , #name?, -solder wire stand, soldering station, 1 kg , esd safe conductive tray , qc magniifer , element14-desoldering pump , precision knife , cutter for fiber optic cable , professional cable tie gun , cable stripper for data cables , cif blue pvc etching tray , usb digital microscope for qc inspection , cleaning sponge , precision wire stripper , precision wire stripper , #name?, warning tape , glue gun , pcb rack , #name?, knipex 115 mm, plastic, smooth, esd tweezer , 230 mm scissors , safety knife with snap-off blade, retractable , -flat snap-off blade, 10 per package, safety knife with snap-off blade, retractable , flat snap-off blade, 10 per package , 230 mm craft knife, 10a blade , steel fine point diagonal scalpel blade, 37mm, 100 per

Micro Pulse Lider Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

State Government

State Government

State Government

Central Government/Public Sector