Latest micro typing machine Tenders | Government micro typing machine Tenders

CTN :43605065

30 Jan, 2026 NA

Delhi - Delhi

Tender For supply of technical requirements for document processing, retrieval, and intelligentsummarization system (prism)

corporations/Associations/Others

CTN :43581491

05 Feb, 2026 2.94 Crore

Delhi - Delhi

Tender For customized amc/cmc for pre-owned products - sdh; primatel; annual maintenance contract (amc); quarterly; yes; amc of primatel make sdh equipment(s) deployed at ofc based communication system of railtel.- work is to carry out the amc of sdh equipment(s) deployed at railtel s network pan india. the work includes provision of technical support, repair/replacements and return of defective hardware, and site visit by experts in case of complex failures. this annual maintenance contract will cover the provision of remote as well as on-site services (in case of emergency like situations requiring deputing the competent technical resources to attend the failures) to be provided by the oem. this document will also cover the hardware replacement and return services for the rectification of defective modules/cards/parts etc which are the key tools in use for uninterrupted traffic. support for amc must be 24x7 basis. it also includes the key performance parameter which will decide the outcome of the oem within reasonable time frame along with the provision of penalties. to enforce fulfilment of support objectives, bidder shall make available services of one qualified engineer each at noc site and dr site to the satisfaction of railtel for level ii support during the amc period. this annual maintenance contract will cover the following services: i) technical support service. ii) hardware repair/replacement service. iii) software updates /os updates.

CTN :43449064

24 Jan, 2026 7.10 Lacs

Thrissur - Kerala

Tender For corrigendum : pourchase of dental equipment for omr department - purchase of dental equipment, psp scanner with desktop computer system(should check the specification uploaded ) should have the following componento imaging plates (size 0-4). o scanner for the imaging plate. iii. following accessories should be supplied along with the equipment free of cost: imaging plates, size 0 - 2nos, size 1 1 nos, size 2 6 nos, size 3 1 nos, size 4- 2 nos specification of imaging plate i. should be flexible and thin as film for simple positioning. ii. cable- free system iii. sizes: 5 sizes should be available such as: size 0: 2x3cm, size 1: 2 x 4 cm, size 2: 3.1 x 4.1 cm, size 3: 2.7 x 5.4 cm, size 4: 5.7x7.5cm. broader exposure time frame & wide grey scale. specification for scanner: o should have input/output buffer; with its cassette transport system, table top type. scanning time should be less than 1 minute amc -5 years technical specifications :theoretical resolution -25lp/mmtrue resolution 17lp/mmimaging plate sizes (height width) size 0(22 35mm),size 2 (31 41mm),size 4(57 76mm)power supply :100-200v,50/60hz,1.5aautomatic plate erasingtime to first image: as little as 5 secconnectivity : ethernet system dimensions :w h d ,237 267 260mmweight :approx. 6 kgadditional psp sensors plates requiredsize 0 (22 35mm) -2 pack (each containing 4 sensor plates )size 2 (31 41mm) -6 pack( each containing 4 sensor plates)size 4(57 76mm) 2 pack( each containing 2 sensor plates ) psp sleeve size 2-100desktop computer22 monitorintel core i3-n300 processor8gb ddr5512gb ssdwireless keyboard and mousewindows 11 software,warranty minimum 1 year

Central Government/Public Sector

CTN :43476278

23 Jan, 2026 NA

Multi City - Multi State

Tender For corrigendum : selection of backend technical partner- system integrator for supply installation testing and commissioning of integrated command control centre for cctv surveillance system with vms and artificial intelligence based video analytics at nlcil hq along with five unit monitoring station and cctv surveillance system at nlcil mines

Central Government/Public Sector

CTN :43480690

27 Jan, 2026 NA

Noida - Uttar Pradesh

Tender For corrigendum : package name: compressed air system as per technical specification no- pe-ts-510/ 527/ 528/ 529/ 530-555-a001 rev 0 - compressed air system as per technical specification no- pe-ts-510/ 527/ 528/ 529/ 530-555-a001 rev 0, total lump sum firm price inclusive of all prevailing taxes, duties and other levies for supply part, services part, mandatory spares, engineering charges and amc comprising of design (i.e. preparation and submission of drawing /documents including as built drawings and o&m manuals), engineering, manufacture, fabrication, assembly, inspection / testing at vendors & sub-vendor s works, painting, maintenance tools & tackles (as applicable), fill of lubricants & consumables, mandatory spares along with spares for erection (as required), start-up spares and commissioning spares (as required), operational spares (as specified), forwarding, proper packing, shipment and delivery at site, unloading, handling, transportation & storage at site, in-site transportation, assembly, erection & commissioning, final painting at site, minor civil work, trial run at site, carrying out performance guarantee tests at site, training of bhel & customer o&m staff at project site and handover in flawless condition of the package to the end customer complete with all accessories for the total scope defined as per bhel nit & tender technical specification as specified for following projects, amendments & agreements till placement of order.1. 2x660 mw dvc raghunathpur (break-up as per annexure-i).2. 2x660 mw cpgcl korba west (break-up as per annexure-ii)3. 1x800 mw gsecl ukai (break-up as per annexure-iii)4. 2x660 mw mahagenco koradi (break-up as per annexure-iv), total lump sum firm price inclusive of all prevailing taxes, duties and other levies for supply part, services part, mandatory spares, engineering charges and amc comprising of design (i.e. preparation and submission of drawing /documents including as built drawings and o&m manuals), engineering, manufacture, fabrication, assembly, inspection / testing at vendors & sub-vendor s works, painting, maintenance tools & tackles (as applicable), fill of lubricants & consumables, mandatory spares along with spares for erection (as required), start-up spares and commissioning spares (as required), operational spares (as specified), forwarding, proper packing, shipment and delivery at site, unloading, handling, transportation & storage at site, in-site transportation, assembly, erection & commissioning, final painting at site, minor civil work, trial run at site, carrying out performance guarantee tests at site, training of bhel & customer o&m staff at project site and handover in flawless condition of the package to the end customer complete with all accessories for the total scope defined as per bhel nit & tender technical specification for group ii project, amendments & agreements till placement of order. (break-up as per annexure v)

Central Government/Public Sector

CTN :42920102

19 Jan, 2026 NA

Goa - Goa

Tender For corrigendum : supply of lan system as per scope of supply in sotr yard 1280 , technical documentation , training , installation and commissioning spares , service engineer charges , lan system as per scope of supply in sotr yard 1281 , lan system as per scope of supply in sotr yard 1282 , lan system as per scope of supply in sotr yard 1283 , lan system as per scope of supply in sotr yard 1284 , lan system as per scope of supply in sotr yard 1285 , lan system as per scope of supply in sotr yard 1286

CTN :43247439

05 Jan, 2026 NA

Multi City - Chhattisgarh

Tender For corrigendum : design, construction, testing, commissioning of all the components of interception and diversion based sewage treatment plant (stp) work including 05 years of operation and maintenance of the entire system.• survey, investigation, design and construction of various diversion drains of inner size 0.50m(w) x 0.50m(h) for a length of 10m, 1.00m(w) x 1.20m(h) for a length of 10m and 1.00m(w) x 1.00m(h) for a length of 210m• survey, investigation, design and construction of coarse, medium screen, grit chambers of various sizes as detailed in scope of work for each wet well.• design and construction of 3 no. wet wells with overhead pump house as per the technical specification• survey, investigation, design, supply, laying, jointing and construction of rising main (di-k9 pipe) of inner dia. 150 mm for a length of 950m and dia. 100 mm for a length of 100m• stp (2 nos) - designing (aesthetically), providing, and constructing and giving satisfactory trials of sewage treatment plant consisting of receiving chamber, screen chamber, grit chamber, measuring flume, distribution chamber with primary and secondary treatment, etc. as per the technical specification of capacity 0.50 mld of facultative aeration lagoon convensional technology including allied units for waste disposal with all civil and mechanical, electrical works involved including administration cum laboratory building of minimum carpet area of 800 sqft. complete with all electrical works.• design and construction of planted drying bed for co-treatment of faecal sludge - 4 nos. of size l- 5.00 x w- 2.00 x height as per design + free board 0.30)• boundary wall around entire stp area, internal and external electrification.• operation and maintenance (o&m) for the proposed works / entire sewerage system (proposed) for a period of 5 years after successful completion of trial run period or handing over whichever is later.

State Government

CTN :43337357

20 Jan, 2026 NA

Kamrup - Assam

Tender For corrigendum : supply of various tools and equipment for the dept. of instrumentation and usic gauhati university - technical specifications, variable speed random orbital sander power: 300w or more orbits(no load) 0-13000 rpm pad diameter: 125 mm / 5 inch voltage: 220v-240v weight: 1.5kg or less for easy handling warranty: 2 yrs or more included accessories:- dust bag model: stanley ss30 or equivalent, corded electric hand planer power: 750 w or more planing width: 82 mm maximum depth of cut: at least 2.0 mm per pass no-load speed: at least 16,000 rpm blades: reversible tungsten carbide / tct blades blade change system: simple, tool-assisted blade replacement with proper blade locking sole plate (base): precision machined aluminium / die-cast metal chip ejection: selectable left or right chip ejection dust extraction: provision for dust bag and/or vacuum extraction rebating capability: suitable for rebating / edge planing with guide ergonomic handle with non-slip grip safety:- double insulated or earthed design- thermal overload protection- fully guarded cutter head voltage: 220v 240v, 50 hz weight: not more than 3.2 kg included accessories (minimum):- reversible tct blade set (installed)- one additional spare set of tct blades- dust bag / dust extraction adapter- parallel / rebating guide- blade changing tool- instruction and safety manual warranty: minimum 1-year manufacturer warranty spare parts availability for at least 5 years model: stanley stpp7502 or equivalent, corded heavy duty chop / cut-off saw power: minimum 2,200 w blade / wheel diameter: 355 mm /14 in no-load speed: at least 3,800 rpm cutting capacity at 90 :- circular profile: 120 mm- square profile: 120 120 mm- rectangular profile: 110 160 mm- angular profile: 140 160 mm start system: soft start / reduced start-up current control base / bed: solid steel or machined aluminium base suitable for welding jigs & stops (no thin stamped base) clamping: quick-release work clamp for secure, repeatable cuts wheel change: spindle lock and wrench included for safe wheel replacement dust / spark management: heavy-duty guard with spark deflector and optional provision for connection to extraction or shop vacuum safety: conforms to iec/en/is safety standards for cut-off/chop saws thermal overload protection / motor protection ergonomics: c-handle or d-handle with positive trigger control balanced design for stable cutting voltage: 220 v 240 v, 50 hz included accessories (minimum): one metal cutting wheel (suitable specification) flanges, nuts & wheel change tools instruction manual and safety guide warranty: minimum 2-years manufacturer warranty model: dewalt dw871 or equivalent, professional thickness planer power input: minimum 1,800 w (corded electric) no-load speed: 10,000 rpm planing / width capacity: 310 mm or more maximum planing depth: minimum 2 mm per pass workpiece thickness capacity: 152 mm feed rate: 8 m/min cutter head: two-knife or multi-knife head with quick, safe blade change system infeed / outfeed tables: rigid, level metal tables to support workpiece stability depth adjustment / scale: clear graduated depth control for accurate thicknessing dust extraction: dedicated dust port / adapter for workshop extraction construction: heavy-duty cast metal / machined steel construction, suitable for workshop use safety: complies with relevant iec/en/is safety standards; includes cutter guards and emergency stop voltage: 220 v 240 v, 50 hz included accessories (minimum):- dust extraction adapter- blade spanner and hex keys- blade changing guides- instruction & safety manual warranty: minimum 2-years manufacturer warranty model: dewalt dw733 or equivalent professional thickness planer, brushless impact driver kit power source: cordless, battery-powered (18 v lithium-ion xr system). motor type: brushless dc motor for improved efficiency and longer tool life. battery: two (2) 3.0 ah li-ion batteries included with kit. maximum torque: 190 nm (newton metre) tor

Central Government/Public Sector

CTN :43340608

23 Jan, 2026 50.00 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : certain repairs to e/m services, earthings, cables, lights etc for wsa and repair maintenance of lt panel, underground cables earthing system at various locations in technical area at af station chandigarh under ge (af) chandigarh

State Government

CTN :43411752

20 Jan, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : name of item/equipment: advanced documentation examination system-01 no. - advanced documentation examination system- 01 no. (as per technical specifications mentioned in annexure i of tender document), optional accessories (if any), installation charges (if any), other charges (commission etc. - if any), cmc charges for first year after warranty (optional - refer point no. 35 of gtc of tender document), cmc charges for second year after warranty (optional - refer point no. 35 of gtc of tender document), cmc charges for third year after warranty (optional - refer point no. 35 of gtc of tender document), cmc charges for fourth year after warranty (optional - refer point no. 35 of gtc of tender document), cmc charges for fifth year after warranty (optional - refer point no. 35 of gtc of tender document), amc charges for first year after warranty (optional - refer point no. 35 of gtc of tender document), amc charges for second year after warranty (optional - refer point no. 35 of gtc of tender document), amc charges for third year after warranty (optional - refer point no. 35 of gtc of tender document), amc charges for fourth year after warranty (optional - refer point no. 35 of gtc of tender document), amc charges for fifth year after warranty (optional - refer point no. 35 of gtc of tender document)

Micro Typing Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government