Latest microfilter Tenders | Government microfilter Tenders

Central Government/Public Sector

CTN :40135763

02 Aug, 2025 NA

Raigarh - Chhattisgarh

Tender For bid to ras corrigendum : supply of filter , supply- ac and ventilation system- air intake louver , supply- ac and ventilation system- gravity damper , supply- ac and ventilation system- axial flow supply fans- 5500 cmh , supply- ac and ventilation system- axial flow exhaust fans with flp motor -7500 cmh , spares- ac and ventilation system -v-belt for ahu blower of each type , spares- ac and ventilation system -ahu blower bearings of each type , spares- ac and ventilation system -blower motor bearing for ahu , spares- ac and ventilation system -pre filter for ahu , spares- ac and ventilation system -fine filter for ahu , spares- ac and ventilation system -relative humidity sensors , spares- ac and ventilation system - geyserstat , spares-ac and ventilation system- local humidity temperature indicators , etc- ac and ventilation system- air cooled dx type condensing unit- minimum 33 tr actual capacity , etc- ac and ventilation system- air handling unit- ahu , etc- ac and ventilation system- fresh air fan assembly , etc- ac and ventilation system- split ac unit - 2 tr , etc- ac and ventilation system- strip heaters , etc- ac and ventilation system- pan humidifier , etc- ac and ventilation system- copper refrigerant piping- suction line , etc- ac and ventilation system- copper refrigerant piping-liquid line , etc- ac and ventilation system- refrigerant gas , etc- ac and ventilation system- gss duct sheet-24 g- air conditioning system , etc- ac and ventilation system- gss duct sheet-22 g- air conditioning system , etc- ac and ventilation system- gss duct sheet- 20 g- air conditioning system , etc- ac and ventilation system-gss duct sheet- 18 g- air conditioning system , etc- ac and ventilation system-non return damper , etc- ac and ventilation system-volume control damper , etc- ac and ventilation system- fire damper , etc- ac and ventilation system- motorised actuator for fire damper , etc- ac and ventilation system- grills diffusers , etc- ac and ventilation system- accoustic insulation , etc- ac and ventilation system- thermal insulation , etc- ac and ventilation system- dp switch , etc- ac and ventilation system- air flow switch , etc- ac and ventilation system- temperature cum rh sensor , etc- ac and ventilation system- fine filter , etc- ac and ventilation system- air intake louver , etc- ac and ventilation system-gravity damper , etc- ac and ventilation system- axial flow etc fans- 5500 cmh , etc- ac and ventilation system- axial flow exhaust fans with flp motor -7500 cmh , etc- ac and ventilation system-cable laying and termination alonwith lugs glands and any other accessories

Central Government/Public Sector

CTN :41025854

07 Aug, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; total price including all applicable taxes and duties for removal and replacement of gt air intake filter, ventilation filter, gas filter elements an..

CTN :41260198

20 Aug, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For s/i/c of exhaust & ventilation system for coolant manufactur loni lube- 2 top discharge air cooler,50.2 series exhaust fan,exhaust fan electronic controller auto restart,duct gi l bend,duct gi straight,wall stand with railing,dust filter,crystal marbles,auto swing grill,rooftop extension for exhaust,installation cooler,installation exhaust,installation height lifting,installation water proofing,duct xple insulation

State Government

CTN :41204633

31 Jul, 2025 17.86 Lacs

Delhi - Delhi

Tender For maintenance of completed scheme under na-ii/south zonesh-providing and installation of digital safety system and safety equipments in community halls of kishangarh and harkesh nagar (specialized work) - supplying and installation of high quality image with 4 mp ip bullet camera, audio recording 1/2.8"cmos sensor, 4 mp (1920*1080)@30/25fps; 720p (1280*720)@30/25fps, ultra 265, h.265, h.264, smart ip, up to 30m (98ft) ip distance, day/night functionality, 2d/3d dnr (digital noise reduction), ip67 protection, support poe power supply, 3- axis, , lens - 2.8 mm- 6 mm@f2.0, adjustment angle, pan: 0 ~ 360 , shutter - auto/manual, 1 ~ 1/100000s, minimum illumination - colour: 0.01lux (f2.0, agc on) 0lux with ir on, , digital noise reduction - 2d/3d dnr, day/night - ir-cut filter with auto switch (icr), s/n - >52db, ir range - up to 30m (98ft) ir range, wave length - 850metre, ir on/off control - auto/manual, defog -digital defog, wdr - dwdr, 10/100m base-tx ethernet, ce: en 60950-1 ul: ul60950-1 fcc: fcc part 15, complete as req. make:- hikvision / advidia / dahua/bosch or equivalent as approved by the engineer-in-charge., supplying of nvr support ultra 265/h.265/h.264 video formats, 16-channel input, third-party ip cameras supported with onvif conformance: profile s, profile g, profile t, support 1-ch hdmi, 1-ch vga, hdmi at up to 4k(3840x2160) resolution, hdmi and vga simultaneous output, up to 4k resolution recording, 4 sata hdd up to 10tb, support cloud upgrade, ip video input - 4-ch, upto 160 mbps incoming and outgoing bandwidth, remote users - 128, protocols - p2p, upnp, ntp, dhcp, pppoe, video/audio output - hdmi/vga output - hdmi: 3840x2160/30hz, audio output - 1-ch, 3.5mm ,decoding format - ultra 265/h.265/h.264, sata - 1 sata interface, capacity - up to 6tb for each disk, network interface - 1 rj45 10m/100m self-adaptive ethernet interface complete make:- hikvision / advidia / dahua/ bosch or equivalent as approved by the engineer-in-charge, supplying of 6 tb hdd for nvr complete as req. make- seagate, wd, toshiba or equivalent as approved by the engineer-in-charge., supplying of 16 port gigabit poe switch easy smart managed 16 poe+ (802.3at/af)10/100/1000 mbps rj45 ports providing up to 30w per port total @ 250 watt, 2 non-poe ports total 18 port 2 combo sfp slots for high speed connection i/c testing etc. complete as req. make: cisco/ tp link/ juniper/ netgear/ or equivalent as approved by the engineer-in-charge., supplying and drawing of utp 4 pair cat 6 lan cable in the existing surface/recessed steel/ pvc conduit as required and approved by the engineer-in-charge. make: d-link/ cp-plus/ finolex / havells or equivalent as approved by the engineer-in-charge., supplying of fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 25 mm as approved by the engineer-in-charge., supply, installation, commissioning of 43 (108 cm) 4k ultra hd smart led tv with usb port for cctv surveillance system i/c testing etc. as required. make: samsung / lg/ sony or equivalent as approved by the engineer-in-charge., supply, installation, commissioning of 6u outdoor weatherproof rack confirms to ip55 outdoor standards. adjustable 19 equipment mounting verticals provide better mounting flexibility and maximize the usable mounting space depth adjustable mounting slots pole/ wall mounting provision on rear side top panel with ventilation cable entry from bottom. pdu of 6 socket and fan, lockable toughened glass door, powder coated sheet metal cabinet factory with accessories i/c wall mounting, fixing, testing etc. complete as req. make: server rack/ netrack/ dynamic/ rittal or equivalent as approved by the engineer-in-charge, supply, installation, commissioning of online ups 1kva 24 volts inbuilt ovcd for 1-2 hrs. backup for nvr and cameras, monitor i/c wall mounting, fixing, testing etc. as required make: microte

CTN :40711644

12 Sep, 2025 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for rafale aircraft - led illumination white 2 arms, washer,flat, tie down strap, cable assembly,spec, ventilation duct, shutter, dust filter, regulator speed, xmc/pmc carrier, circuit breaker, current limiter, connector,modular, valve, valve, 6b, thrust washer, tapered spring, spring blade, valve 200b, trigger, safety, flexible cable, retractable plug, scuff fitting, relief valve, sealing plug, control surface, cable assy, w6, rear antenna, rf seeker rib, bearing, left ml, support, aaib66, equipped receptacle, launcher subassembl, spring, terminal bulk, drawer, compression, sensor, equipped, sensor, equipped, aerial, pf, atti selftest be, ml board eq, atti interface be, pcic box, r upper wing tip, cable assy, w1g, cable assy, w2d, cable assy, w4, atu, elbow, asm selftest be, ccr/ars selftest be, asg selftest be, led board, filter, control panel, dust filter, humidity indicator, structure,left fr, cable assy, w5, plug p401, plug, p701 tng, assembly plate, w1166 harness, ml plug, w1304x lmbi cable, pressurizing valve, w2201x harness, emerg. stop box, loader container, mdsci2t-tns4, set of o-rings, valve eq 55 bar, pressure sensor eq, flex gas supply, card regulation, drawer,electrical, programmed display, equipped air intake, equipped gim set, equipped gps hatch, interconnection, bcc spectra equiped, power supply, pivot, circuit breaker, circuit-breaker, circuit-breaker, circuit-breaker, fixed light 24 vcc, switch,shut-off, extender, total temperature probe, buoyancy bladder-9540aaaa, joint,spher-vsv actuating, joint,spher-vsv actuating, tube,oil return-bearing 1, pressure indicator, roller, delay line, block, right ml, light source, ir seeker rib, thermal strip, terminal, ground, plug, equipped, diaphragm, wheel speed transducer, relays circuit board, oil level gauge, oil pressure switch, pin,hollow, sensor,n2

Central Government/Public Sector

CTN :40665491

05 Aug, 2025 NA

Goa - Goa

Tender For corrigendum : supply of hvac sensor and fittings for ventilation system e e - electromagnetic coil be 220v hz 50 ip67 with latch , latched magnetic coil be 380v 50hz ip67 , solenoid valve g3 by 4 ev220v epdm seal , solenoid valve g11by4 ev220v epdm seal , solenoid valve g2 ev220v epdm seal , filter g13by4 type y222 , filter g11by4 type y222 , filter g2 type y222 , thermostat kps 76 , thermostat kps 77 , sleeve l160 for thermostat kps , set of seals for thermostat kps , aluminum thermo-conductive compound for thermostat kps tube , assembly tape for thermostat kps l 392 mm , on board spares as per h-ta no.h-ta-460000- 104 annexure a-1 itemwise unit rate to be provided , on board spares as per h-ta no.h-ta-460000-104 annexure a- 2 itemwise unit rate to be provided , on board spares as per h-ta no.h-ta-460000-104 annexure a-3 itemwise unit rate to be provided , on board spares as per h-ta no.h-ta- 460000-104 annexure a-4 itemwise unit rate to be provided

Central Government/Public Sector

CTN :41181333

04 Aug, 2025 NA

Chennai - Tamil Nadu

Tender For supply of filter assembly for machine room ventilation

corporations/Associations/Others

CTN :41080735

29 Jul, 2025 13.11 Lacs

Multi City - Karnataka

Tender For supply of safety equipment and uniforms to ugd helpers working in tcc and tools and equipments for ugd vehicles-?? ????? ? ????safety equipment for ugd assistants working in your municipal corporationand uniforms, and u.g.d. branchvijay aggarwalinstrumentssupplying (tools and equipments)sl.no.description of item123supplying of uniform: made with durable fabriclike polycotton, a plain design, including tcc logosupplying of safety helmets: helmets shell should be done shaped, smoothfinish and no metallic components are to be used made with high quality poly carbonate. brim diameter should be 6mm, peak 50mm. helmet should have slots for ventilation. number of holes should be more than 3 but the average area of all holes should not exceed 300mm2.made with high quality poly carbonate it should match the as is 2925:1984 specification standardsupplying of rubber gumboots: a durable, waterproof upper and sole, slip-resistant tread, andpotentially a steel or composite toe cap for impact protection. other important aspects are comfort features like a soft lining and a supportive insole, and compliance with relevant safety standards like is 15298 part-ii.4supplying of safety shoes: safety features such as toe protection, penetration resistance, slip resistance, and electrical properties. these specifications ensure the footwear provides adequate protection against workplace hazards. safety shoes should meets the specifications as per standards like is 15298 (part 2) and en iso 20345,supplying of n-95 mask: an n95 mask, should be adheres to the specifications outlined in is 9473:2002, - filtering half masks. this standard specifies the requirements for filtering half masks, 5 including their design, performance, and testing procedures. n95 masks meeting this standard are designed to filter at least 95% of airborne particles. a minimum 95% filtration efficiency against certain non-oil based particles, and a close facial fit to minimize leakage.unittotal quantityrates amounteach168 2200.00369600.00each84450.0037800.00each 64600.0038400.00each201100.0022000.00each2016 70.00141120.006789supplying of heavy duty rubber hand gloves: heavy-duty rubber gloves are designed for robust protection against chemicals, mechanical risks, and punctures they are commonly made from nitrile or natural rubber and often feature a cotton lining for comfort. it should meets the standard requirements of is 4770:1991supplying of cloth aprons 14-07-2025: (reflective jackets): 100% polyester 3 ply sewing thread of matching colour, h-vis reflective material, durable, breathable, lightweight and machine washable reflective material will be high visibility warning garments with synthetic slide fasteners, micro prismatic type, white or silver colour certified by the manufacturer of retro reflective material. reqired size and colour (yellow and orange) and it should meets the standard requirements of is 15809:2017supplying of heavy duty rain coat: raincoat should be waterproof, comfortable, lightweight, and have a hood. it should also be durable, with sealed seams and good breathability. and it meets the specifications, as per indian standards, are detailed in is 2422 : 2015supplying of cast iron crow bar: made of high-carbon steel can also be used. length: varies depending on application, with common lengths being 24, 30 inches, or 5-6.5 feet for greater leverage. cross-section: often hexagonal, octagonal, or round end shape: one endisusually pointed or beveled, while the other may be flat, clawed, or angled for different prying or demolition tasks weight: varies based on length and material, but generally ranges from 7 to 9 kg. hardness: heat-treated to a minimum hardness value, such as 320 hv, for durability. ndit meets the specifications, asper indian standards, are detailed in is 704: 1984supplying of spade or hoe with handle : made with high corbon steel and flat, sharp-edged 10 blade and a long handle. it's distinct from a shovel, which has a more curved, scoop-lik

Central Government And Public Sector

CTN :41081634

11 Aug, 2025 NA

Bhilai - Chhattisgarh

Tender For supply of filter assly. for traction motor ventilation as per clw specn. no. clw/ms/3/012, part i, i i,iii, alt-6 and clw drg. no. 1209.11- 135.122 alt-2,. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41103750

06 Aug, 2025 NA

Perambalur - Tamil Nadu

Tender For supply of filter assly for oil cooler ventilation

Microfilter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors