Latest microhmmeter Tenders | Government microhmmeter Tenders

State Government

CTN :45263804

22 Jun, 2026 4.63 Crore

Panchkula - Haryana

Tender For corrigendum : tender for the supply of various equipments - muffle furnace, "al2o3 sample plate, al2o3 furnace door block, protection glove, crucible clip, crucibles, karl fischer titrator, "titration vessel, detector electrode with lead, generator electrode (with frit) with lead, desiccant tube and cap, injection septa (pack of 10), gas tight syringe 1.0ml , luer needle 17-gauge, dust cover, results manager software, main power pack, fuse, karl fischer titration reagent(s), nist calibration standard, refrigerated centrifuge (bench top), bottles/falcon tubes/adapters for 0.2ml tubes, one set of other items (adapters) required for improving the applicability/system performance should to be quoted, nitrogen evaporator, evaporation tubes, gas fuse , water purification system including water softner, cartridges, filters etc. for , bomb calorimeter, "ignition wire, cotton thread, combustion crucible, bomb, nist certified benzoic for calibration, any other accessories required for analysis of food samples., gas chromatograph with ecd, tcd, fid with autosampler, "pesticide column (30 m x 0.250mm x 0.25m (5ms (95% dimethyl-, 5% diphenyl-polysiloxane / 1ms (100% dimethyl polysiloxane or equivalent) 100 mm column for fatty acid profiling with main concern of trans fatty acid application, column for cholesterol application, stationary phase: 95% dimethyl-, 5% diphenyl-polysiloxane (30 m x 0.250mm x 0.25m),, "vial sets (1, 2 ml, crimp type, amber and clear glass), vials (10, 20ml crimp type with cap & septa), 300/500 l recovery vials, septa ptfe/silicone (for 1, 2 ml vials), septa ptfe/silicone (for 10, 20 ml headspace vials), ergonomic crimping tools for different vial types, ergonomic decapping tools for different vial types, head space vials 10,20 ml capacity, suitable syringes for quoted autosampler, suitable headspace syringe /valve/loop, quechers kits for pesticides and herbicides in following matrices:, matrices with high fat, matrices with high water content, matrices with high pigmented, spe cartridges for water., ultra performance liquid chromatography (uplc) with photodiode array (pda), fluorescence (fld) and refractive index detector (rid), sample vials with 1.5 ml or greater, stainless steel ultra sonic bath with the capacity of 5 l or more, with time setting (min) 1-30min or continuous operation with led and push button (should be ip 33 protection class) for sonication of spare parts as well as solvents, fittings, frits, ferules and tubings, tubing cutter, solvent bottles (1000 ml capacity), solvent filters (glass & ss both, compatible manual syringes -10 l, 20 l, 50 l, standards for hplc calibration for pda, ri and fluorescence detector, consumables required for each detector must be provided., "hplc columns: one each of, c8 = 250 4.6 5m c18 = 250 4.6 5m, cyano = 250 4.6 5m. amino = 250 4.6 5m, phenyl = 250 4.6 5m. silica = 250 4.6 5m., all columns must be supplied with respective guard column and holder. ", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., ft-ir with atr & liquid cell, " hydraulic press with kbr die and pellet holder, suitable mortar pestle (dia 5-6 cm), suitable portable de humidifier to maintain 30- 60% rh, temperature and relative humidity digital indicator with calibration certificate from iso 17025 accredited lab., reference nist standard polystyrene film (0.3 mm) over the range of 3800 cm-1 to 650 cm-1., abbes r

CTN :45333373

13 Jun, 2026 3.33 Crore

Muzaffarnagar - Uttar Pradesh

Tender For corrigendum : supply of interactive panels with cpu (q2) , professional large format display (v2) (q2) , weighing machine , mill house , fully automatic jaggery production unit , solar panel foundation and all related items , structure of complete plant , bought out for complete plan , erection of mill house and boiling house , hdg set , submersible , fire fighting equipment , hcl kit single , oilfree 15 com , air filter , cylinder c2h2 , regulator c2h2 , hood aas , vacuum hot air oven , digital hot air oven , air circulation fan , microprocessor digital temperature indicator , digital timer , heating mantle , digital muffle furnace , single beam uv , double beam uv , digital photo colorimeter , weighing balance , analytical balance cy , water bath , pid temperature controller , atomic absorption spectrophotometer , gas chromatography , fused silica capillary column , gas purification panel , electromechanical voltage stabilizer , carbon steel cylinder , pressure regulator , glassware , servo candy pillopack wrapping machine , horizontal flow wrapepillopack high speed packaging machine , automatic packing machine , vertical single face paper corrugating machine , corrugated sheet pasting machine , eccentric slotter machine , bar rotary cutting creasing machine , stitching machine , paper reel to sheet cutting machine , flexo graphic printing machine , printing machine , manual jar filling machine , manual pouch sealing machine , manual sticker labelling machine , bag sewing machine , bar coding equipment , bar reader machine , projector , laptop , public address audio system , pantry , desktop with accessorie , tv 45 inch screen , solar panel , bio fertilizer plant , cctv unit for control ) /bid number : gem/2026/b/7564787 * /dated: 26-05-2026 & & / bid document 1 / 42

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

CTN :45484021

09 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For supply of driver of 5 pieces 100 mm to 300 mm , soldering iron 125watt 230volt , temperature controlled soldering 50 watt 230 volt iron , i motor pump set 1 hp 1 phase 240 v , cabinet dryer electrical , pipe bending machine hydraulic type 12mm to 30mm , industrial sewing machine , fuel injection pump ve pump distributor fuel rotary pump dpc , phase sequence indicator 3 phase 415 v , pipe threading die with handle ratchet type die head of 12 34 and 1 , tachometer digital photo sensor type 10000 rpm , screw driver insulated 6mm 150 mm diamond head , punch centre 10 mm 150 mm , micrometer inside with extension rods accuracy 001 mm with extension rods up to 150 mm , steel measuring tape 20 mts , hacksaw frame fixed type 300 mm , dial gauge type 1 gr a complete with clamping devices and with , h washing machine semi automatic 5 kg , safety harness , auto darkening welding helmet , inverter with battery 1kva , depth micrometer 025mm accuracy 001mm , motorised bench grinder 1 hp 3 phase 440vdia150 mm , battery charger 0 6 9 12 24 48v 30amp , air ratchet with standard accessories , safety belt standard quality , drilling machinebenchtodrill up to 12mm dia along with accessories , electrical test bench , cutting knives , pocket steel tape 6 long , measuring tape 30m , measuring steel tape 15m , pliers round nose 15 cm , spoons wooden ladle , face shield , moisture box aluminium 100gm capacity , cleaning tray 45 30 cm , spanner t flocks for screwing up and upscrewing inaccessible , wheel barrow , spade , pocker , hacksaw frame fixed 150 mm , piston ring compressor , electric testing screw driver , connecting screw driver 100 mm , rotary switch 16 a440v , ph meter rod , lead light , chisels cross cut 200 mm 6mm , tweezers 100 mm , induction cooktop with following feature , glass rod , bradawl , circlip pliers expanding 15cm and 20cm , number punch 6 mm , desiccator , pipe cutting tool up to 5cm dia , chamois , electric iron automatic 750 w 240 v , belt sander narrow surface , trowelbrick 10 25cm long , pipe cutter wheel type 6 mm to 25 mm , digital vernier caliper universal type 0 150 mm lc 005 mm , heat sealing machine handpedal operated , feeler gauge 20 blades metric , screw pitch gauge metric 025 to 6 mm , beaker 50 100 250 ml 500 ml , pliers side cutting 15 cm , sleeve drill morse 0 1 1 2 2 3 3 4 4 5 , hydrometers of different ranges 030 3060 6090 brix , grease gun 05 ltr capacity , portable sanding machine 600w , water purifier ro and uv technologies , ph meter digital , hand rubber gloves tested for 5000 v , earth clamp , portable electric drill machine 15 mm drill bit capacity , measuring cylinder 100mi250ml 200 ml 500ml , pliers round nose insulated 100 mm , hammer extractor type250 grams , pipe flaring tool , thermostat , particle masks , soldering iron changeable bits 15w , spanner adjustable drop forged ss 150 mm , professional air blower power consumption 820 w , plier side cutting 200mm , washing machine automatic , microwave oven , pliers flat nose insulated 200 mm , utility knife , e ac ceiling fan and ac table fan 68 watt 230 v each , electric mixer , lugs for cable , pully puller with 3 legs 300mm , rheostat sliding type 0 25 ohm 2 amp , temperature gauge range 0 to 150 c , rheostat sliding type 0 1 ohm 10amp , conical flask 50 100 250ml 500ml , shredder for slicing of fruit and vegetable capacity 5kghrs , torque wrenches 535 nm , chisel cold round nose 9 mm 100 mm , weighing balance digital , electric soldering iron 35 w , rheostat sliding type 0 10 ohm 5 amp , impact wrench 1 to 2 inch drive , plier flat nose 150 mm , digital vernier caliper 0 150mm least count 002 , measuring tape (v3) (q3) //bid details 2 / 81

Central Government And Public Sector

CTN :45370557

17 Jun, 2026 NA

Angul - Odisha

Tender For corrigendum : supply of digital temperature controllers cum indicators , microprocessor based digital temperature indicator cum controller

CTN :45478137

27 Jun, 2026 NA

Vidisha - Madhya Pradesh

Tender For items - computer and servises and otheres, mcb (miniature circuit breaker), acb (3200a/4000a ), acb (air circuit breaker), allen key set, amf relay, ammeter, annunciation system, anti-corrosion spray, arc flash suit, arc flash suit (ht/lt panel ), auxiliary contacts, avr (automatic voltage regulator), battery charger, blower/air blower, breather assembly, bus coupler acb, busbar insulators, busbar supports, cable glands, cable glands, cable lugs, cable ties, cable ties, changeover switch, clamp meter, clamp meter, combination pliers, consumables, contact cleaner spray, contactor, continuity tester, control cable, control fuses, control relay, control wires, cooling fan, copper busbar, crimping tool, ct (current transformer), current transformer (ct), dg set synchronization panel (3 750 kva), digital multimeter, digital multimeter, discharge rod, earth fault relay, earth switch, earth tester, earthing rod, electrical contact cleaner, electrical gloves (11 kv rating), electrical safety gloves, emergency stop switch, energy meter, engine control module, face shield, ferrules, ferrules, flexible wire, frequency meter, fuse fuse base, heat shrink sleeves, heat shrink tubes, hrc fuse, hrc fuses, ht protection relay, indicator lamps (r/y/b), infrared thermometer / thermal camera, insulated screwdriver, insulation tape, isolator switch, lightning arrester, load sharing module, lockout-tagout (loto) kit, loto kit, lt pcc/mdb panel, lubricant spray ( ), lugs, maintenance tools, mccb, mccb (molded case circuit breaker), megger (insulation tester), megger 5 kv, microfiber cloth, motorized mechanism, multifunction meter, multifunction meter, nose pliers, numerical protection relay, oti (oil temperature indicator), over current relay, overload relay (olr), phase sequence meter, phase sequence tester, plc module, power analyzer, power cable, power factor meter, protection & metering, pt/vt (potential transformer), push buttons (start/stop), pvc insulation tape, reverse power relay, rust remover, safety equipment, safety goggles, safety helmet, safety helmet, safety shoes, safety shoes, screwdriver set, secondary injection test kit, selector switch, shunt trip coil, side cutter, silica gel, smps (power supply), soft brush, spanner set, speed governor module, spiral wrapping, spring charging motor, starting relay, synchronizing relay, terminal blocks, thermal camera, thermostat, timer relay, torque wrench, transformer buchholz relay, transformer oil, under/over frequency relay, under/over voltage relay, uv coil, vacuum cleaner, vcb (vacuum circuit breaker), voltage tester, voltmeter, wire markers, wire stripper, wti (winding temperature indicator), , , , comprehensive maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor & majour spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete., annual maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete.

CTN :45475064

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of non-consumables for mechanical department - purchase, open cup apparatus standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valve body: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation, closed cup apparatus standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety: over-temperature cut-off flame safety control

CTN :44801778

10 Jun, 2026 NA

Angul - Odisha

Tender For bid to ras supply of spares of m/s super scientific works pvt ltd make 50 ltr reflux reaction distillation unit - 50 ltr. spherical vessel - reactor with centre: dn 150, side: dn, 00/45º x 1 no, dn 40 x 3 nos, bottom: dn 50/40 (for bath & flush bottom), 20 ltr. graduated vessel receiver flask, graduated c-25, s- 25 x 2nos, b-25, 20 ltr.graduated vessel addition flask graduated with c- b 55 with stopper, s-25 x 2, b-25, glass heat exchanger coil type dn 100/0.5 hta: 0.5 m.sq., 610 mm lg., product cooler size dn 25/80/0.2 m², glass column scetion with glass rasching ring and 2 nos ptfe perforated, packing support, 2 nos. of glass stirrer with teflon half moon blade for 50 ltr. flask, glass thermowell & dip pipes, glass pipes & fittings, glass valves - flush bottom, line, drain. angle, vent valves etc, ptfe line bellow with ci bellow flanges, ci i. nges with insert gasket, nut bolt & ptfe 'o' ring, chuck & seal assembly with mechanical seal for 50ltr., multipurpose heating ms cooling bath with ms coil & insulation with, aluminium screwed cladding flame proof heater for 50 ltr. 4kw, 3 phase, 415v, flameproof electric motor with suitable gear box, 0.5hp,180 rpm., flame proof vfd 0.5 hp, flp panel consists of 2 point digital temperature indicator for reactor temp, and reflux temperature & digital temperature indicator cum controller for bath., 03 nos. of flame proof rtd for heater, bath & rda., gi tubular supporting structures powder coated

CTN :45416327

16 Jun, 2026 11.00 Lacs

Payyanur - Kerala

Tender For supply of multi process control trainer setup for instrumentation engineering lab under mhrd scheme - purchase of multiprocess control trainer setup for instrumentation engineering lab under mhrd scheme - multiprocess control trainer set up, multiprocess control trainer set up - specifications:- setup must contain flow, pressure, level, temperature loops also derived loops like cascade and feedforward loops. temperature loop must be independent. setups consist of a circulating closed loop water plant or circulating water system including control valve, tanks, independent pumps and necessary valves including bypass valves and rotameters. using this we can be able to do flow control loop with pid,level control loop with pid,and pressure control pid, as independent experiments.the setup must include the following:1.one linear characteristics diaphragm operated control valve with 15mm stroke 1/2-inch size, type: high-capacity globe seat leakage class (as per ansi/fci 70.2).2.measuring tank with volumetric measurement scale and 1000mm level, in of 25 ltr capacity. sump tank min of 40 ltr capacity. all tanks made of ss304, with sight glass, and finished with mat steel finish.3.2 no s smart dp transmitter for flow and level measurement with hart protocol, display and keys integrated for calibration,0-1000mmh2o measurement range,0.01% accuracy, international iso certified ce approved make,24v supply,4-20ma output, loop powered.4,1nos of magnetic flowmeter with display and keys integrated for calibration,0-2000lph measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, international iso certified ce approved make,24v supply,4-20ma output to measure flow as a independent loop.5,. smart pressure transmitter and temperature transmitters with hart protocol, display and keys integrated for calibration, pressure transmitter 0-10bar measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, temperature transmitter 0-250 rtd type international iso certified ce approved make,24v supply,4-20ma output, loop powered.6, pressure tank of 24 liters with necessary valves for pressure loop.7.1nos orifice plate (ss304) and assembly grade with flange 1/2-inch size for flow measurement.8.2 nos pumps 0.5hp, ss centrifugal pump, minimum 1-inch pipeline of ss or high-pressure withstanding plastic with plastic welding.9. rotameters 2nos 1 inch size flow: 200-2000 l/h,ss thread, clear acrylic type.10, plc control station with 4 analogue inputs and one analogue output with necessary digital inputs and outputs to operate all loops directly from panel side.plc must have ethernet connectivity with supported protocols profinet and modbus tcpip.11.required all pneumatic components to full fill the process loops such as fr,needle valves etc.12,i to p converter 4-20ma to 3-15psi with 1/4" process connection with proper copper copper tubing.13, loop including flow pid control, level pid control, pressure pid control, cascade control (level flow), ratio control (flow flow).14.all loops can be operated using a scada system and independent pushbutton control includes trend of all analogue signals and pid tuning. scada direct profinet connectivity to plc and computer with intel i5 processor, 8gb ddr3 ram,1tb sata hdd,licenced windows 11 professional.15, required a standalone software application that must be installed on pc in which it can used to control and monitor all the functions used in scada. the application must contain process parameter trend graph plot for to study about process loops.16.the whole system setup must be in ms powder coated standalone mobile table with lockable castor wheels. all the components used be industrial. copper tubing for air connection, pressure gauges 4inches 3nos, electrical wiring connection to be flexible for to connect field devices. panel with switches, indicator, test points with banana connectors as required, multistrand wire with proper insulated lugs, ferruling & neat wire dressing & clam

Co-operative

CTN :45444048

20 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For instrument spare and annual maintenance contract - circular charts:-i) cc-200 (fc-261)range 0-100, ii) 9/d/179/fc-241, range 0-600, iii) 9/d/147/s-8963, range 0-150, iv) 9/d/112/s-3452, range 0-30, disposable pen (red), temperature gauge dial size 6" (h guru) heavy duty with test certificate (mercury filed) :-i) range 0-150 c streight steam 6", ii) range- 0-150 c capillary type (3 meter) bulb length 10" copper/pvc, iii)range 0-300 c streight steam 6", iv) range 0-500 c streight steam 6", vacuum gauge dial size 6" range- 0-30 inch of hg/760 mm bottom feed connection 3/8" bsp, h guru heavy duty with test certificate., pressure gauge dial size 6" bottom feed connection size 3/8" or 1/2" bsp, h guru heavy duty with test certificate :-i) range 0-15 psi 01 kg/cm , ii) range 0-30 psi 02 kg/cm , iii) range 0-60 psi 04 kg/cm , iv) range 0-150 psi 10 kg/cm , v) range 0-300 psi 21 kg/cm , vi) range 0-1030 psi 42 kg/cm /70 kg/cm , pressure gauge, dial size 10" bottom feed connection size 1/2" bsp heavy duty with test certificate:-i) range 0-60 kg/cm h. guru with test certificate, ii) range 0-2 kg/cm2 h. guru with test certificate, pressure gauge for turbines heavy duty with test certificate:-i) 4" dial size side back connection %" bsp range 0-2 kg/cm , ii) 4" dial size side back connection %" bsp range 0-4 kg/cm , iii) 4" dial size side back connection %" bsp range 0-7 kg/cm , iv) 4" dial size side back connection %" bsp range 0-10 kg/cm , teflon coated compensating cable 2 core j type, compensating cable fg/ss 2-core k type, 4 digit digital temperature indicator j & k typ , thermocouple sensor heavy duty:-i. 12" x 8 mm j/k type, ii. 8" x 8 mm j/ k type, iii. 6" x 6 mm j/k type, oil pocket ss 12", 6 digit digital event counter, proximity switch (magnetic sensor) pnp-nc sensing 8 mm,voltage 5-35 vdc, max load 300 ma, on/off pneumatic control valve flange type size- 1" to operate at air pressure 60-80 psi suitable for 20 kg/cm line pressure, on/off solenoid valve for pneumatic valve:-a) air filter " line size female thread, b) air filter with air regulator size 4", digital temperature controller (pid) j & k type, digital tachometer range 0-10000 rpm, 96 x 96 with magnetic sensor., steam flow indicator cum totalizer, drum level controller 4-20 ma input/output model no. 5296at (massibus make), dp transmitter 4-20 ma for boiler drum level, honybell make, positioner for drum level control valve, stroke counter for molasses tank, jumbo digital display with sensor, for juice and water tank, current and previous display size 4" x 4"., ma & mv source meter for temp. indicator calibration, pressure transmiter model tsc 01, range 0 to 40 bar, output 04-20 ma, accuracy 0.25% fs, pressure transmiter model ks-e-e-e b02u-m-v, range 0 to 2 bar, output 04-20 ma, supply 9-32 vdc, port g1/4e, syphon pipe s.s. 304 :-(i) u type, (ii) q type, pressure gauge, model en837-1, ss-316, dail size 6", bottom feed connection size 1/2" bsp, heavy duty with test certificate (tempsens make) :-i) range 0-6 kg/cm , ii) range 0-10 kg/cm , iii) range 0-21 kg/cm , iv) range 0-42 kg/cm , pid controller, size 96 96, model no. dc 1040, make honey bell, pressure recorder range, h-guru make, with test certificate (heany duty) with pipe stand mounted ", socket- ", size 10" :-(i) 0-1 kg./cm2, (ii) 0-2 kg./cm2, (iii) 0-10 kg./cm2, orifice with assembly (nipple), inlet pressure 21 kg/cm , outlet pressure 21 kg/cm , inlet temp. 350 c, outlet temp. 350 c, line size 4", drum level transmitter, range 400 to 400 in h2o, (make- honey bell), steam pressure transmitter, range 14.7 to 3000 psi, (make- honey bell), hade mounted thermocouple, length 450 mm, k-type duplex type, with test certificate (heany duty), signal isolator singal input 4-20ma, double output 4-20ma, repair & calibration work with amcsuper-heated wash water temp. controlling system- 01 no., d-super heated exhaust steam temp. controlling system- 01 no., temperature control system of transit heater for c/f machin

Microhmmeter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Co-operative