Latest microplate detection machine Tenders | Government microplate detection machine Tenders

CTN :45455729

10 Jul, 2026 NA

Sibsagar - Assam

Tender For corrigendum : supply of personal protective equipment (ppe), electrical and mechanical safety items and safety detecting devices for various power plants of assam power generation corporation limited (apgcl). - supply of safety items, safety helmet (white colour), safety helmet (grey colour), safety helmet (yellow colour), safety helmet (blue colour), safety helmet (green colour), safety helmet ( red colour), safety electrical gloves 33 kv, safety electrical gloves 430 v, natural rubber gloves (chemical resistant), rubberized cloth apron chemical (acid/alkali) resistant, disposable latex gloves (in pairs), safety ear plug, safety belts mechanical, raincoat with reflector ( high quality and full set-pant and coat type), safety face shield, welding safety gloves, mechanical hand gloves ( heat and strain resistance), safety lifebuoy ring for operation and maintenance personnel at dam, life jacket for operation and maintenance personnel at dam, frp electrical rescue rods, safety glasses/goggles, welding face shield (could be attached with any standard helmet), gum boot number 5, gum boot number 6, gum boot number 7, gum boot number 8, safety shoes (number 4 ), safety shoes (number 5), safety shoes (number 6), safety shoes (number 7), safety shoes (number 8), safety shoes (number 9), safety shoes (number 10), warning/caution tape (100 m piece each), barricading cones with reflective tape, safety net (size: 10m x 5m), raincoat with reflector, gown type, size: m, raincoat with reflector, gown type, size: l, raincoat with reflector, gown type, size: xl, raincoat with reflector, gown type, size: xxl, reflective vest green (size: xxl), reflective vest green (size: xl), reflective vest red (size: xl), reflective vest orange (size: xl), portable gas detector (hc, o2, h2s, co, lel, methane), high rising extension aluminium ladder 20 feets, high rising extension aluminium ladder 30 feets, non contact high voltage detector with insulating rod, non contact high voltage detector (wrist type), foldable stretcher, safety shower and eye wash, arc flash suit, safety belt for electrical works

Central Government/Public Sector

CTN :45712991

08 Jul, 2026 16.55 Lacs

Nagpur - Maharashtra

Tender For supply of test kit prmry injctn 1p 2500a o p 120 percent , test kit scndry injctn 1p i p230vac , discharge rod 33kv complt w extnsn fclty , detector non cntct 90 33kv , tester hnd drvn insltn megger 5000v , tester hnd drvn insltn megger 2 point 5kv , tester hnd drvn insltn megger 1000v , tester erth rsstnc 0 5ohm , rod rscu elct 1 point 75kg 6m 132kv upto100kg , multimeter ac dc 0 20a 0 1000v , detector low vltg non contct 30 600v , ladder al twr extndbl 20 32ftf electrcl , suit kit arc flsh atpv 40cal cm2 gsm 362 , shoes anti electric electrical safety

Central Government/Public Sector

CTN :45692570

06 Jul, 2026 5.00 Lacs

Dhubri - Assam

Tender For supply of items related to repairing and maintenance of ac on rate contract basis - pcb board out doorunit, pcb board indoor unit, out door stand, out door fan motor, indoor blower motor, coper pipe, coper pipe, remote, battery, 3pintop, pipe insulation foam tubing, air conditioner heat insulationtube,polyethylene foamtubeclosedcell retardant, pipe insulation foam tubing, air conditioner heat insulationtube,polyethylene foam tube closed cell retardant, rollingtape, 4corewire, gasr-22, gasr-32, gasr-410, compressor, compressor, compressor, sensor, sensor, ambient sensor, sensor, refrigerant leak detector, fastener nut bolt, whitecement, butanegas/lpg, coper brazing rod, capasitor, capasitor, capasitor, copernut, digitalclamp multimeter, noseplier, combinationplier, screw driver, adjustable wrench, adjustable wrench, l-key, minigas welding machine, lpg brazingtorch, swaging tool, tubecutter, tube bender, measuring tap, hummer, hummer, flashlight/hand lamp, core removetool, flaring tool kit, drillbit, charginghoser410ar32 r404a r134a, refrigerant gas chargingpipe, r-22 valve, thread seal, scale level, drill machine, tools box, tool bag

State Government

CTN :45670395

02 Jul, 2026 5.00 Lacs

Kolhapur - Maharashtra

Tender For procurement of 13 nos. of electrical safety tools and personnel protective equipment (t and p) for technical employees under jaysingpur division of kolhapur circle - h.t. detector- , ladder , hand glove , double ended open jaw spanner set of 8 nos , tree cutting m/c petrol , box spanner set- 8, 10, 12, 14, 16, 17, 19, 22 & 24 mm as per ies standard with toomy bar , tong tester with multi-meter , led rechargeable torch , axe , ht para tap , neon tester , d.o operating rod (telescopic type)

CTN :45698575

09 Jul, 2026 NA

Ratnagiri - Maharashtra

Tender For supply of detector rod sub assembly (rh)859241006-s,rdso drg.no.rdso/s 10810 , cg drg.no.cpmh-1042/1 ]

State Government

CTN :45680270

16 Jul, 2026 NA

Kheda - Gujarat

Tender For supply of various instruments for chp & bop area of wtps unit 8. - over travel limit switch (otls), make: electromag methods, model:- elotc/2no2nc, amps: 40 / 10, voltage: 500 vac, c/s: 50, ag make heavy duty limit switch type : hls/ii. contacts : 2 no + 2 nc rating : 25 amps @ 415 v.ac enclosure : die casting aluminum (lm-6) gasket : nitrile rubber gasket reset : auto reset type, digital pressure gauge: range: 0 to 100 kg/cm2, zero speed switch, make: protocontrol instruments pvt. ltd, model: esm b2, sensing range: 15-17mm, supply: 220vac , range: 10 -100 rpm, wire: 2 wire, ppr: 4, cable length: 2 meter (mininum), sr no: 15j252., inductive proximity switch, sensing distance: 25mm, supply: 230v ac, dimension: 50mm x 110mm., zss controller with sensor probe set, make: jayashree, speed setting: 100 to 1000 rpm, 4 imp rev,2no + 2nc,5a @ 240v ac, supply voltage:90-250v ac, sensor probe model: sp 12 b 30*65 10 m, termination: 3 wires dc., chlorine leak detector - single sensor for model no. 5002, range : 0 to 5 ppm of chlorine,make: perfect chloro system, magnesium anode rod, length: 30 cm, diameter:- 1/2 (half) inch., pressure gauge, 0-16 kg/cm2, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body : ss316lor suitable, dial :150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m) direct bottom entry, ip65, pressure gauge, 0-21 kg/cm2, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body:ss316l or suitable, dial:150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m) direct bottom entry, ip65, pressure gauge dial size 150mm with range 0-10 kg./cm2, temperature gauge, 0 to 160 deg c, bi -metal strip coiled, dial 150mm, +/- 1 percent fsd accuracy, 12mm stem dia, 100mm stem length, ss304 case, neoprene gasket, 1/2 inch npt(m) process connection, 1/2 inch npt (m) adjustable to thermowell, rtd pt 100, duplex, sheath dia. 6 mm, sheath length 150 mm, ag make proximity switch, model: ps 2000d, input power : 24 vdc, proximity dia : m50, sensing dist : 16 mm-25mm, 4 wire type, wire length : 5 mtrs, contact: 1no+ 1nc., pointer puller for pressure gauges, electronic speed switch monitoring unit with indictive sensor probe, 10-100 rpm, 4 digit speed indication, 90-250v ac supply, accuracy : +/-5 percent, calibration 4 imp / rev, 1-20s itd & ntd, ip65, pressure switch ,range 0.6 to 6 kg/sqcm, pressure switch range : 1 to 10 bar, pressure switch, range 1.6 to 16 bar, type : bellow, connection : 1/2" npt, bottom entry, vacuum switch low, (-760 to 0)mmhg, diapragm seal tantalum/monel or better for chlorine service, body-ss316l or suitable, die cast aluminium or better enclosure, accuracy : +/-0.5 percent, process connection:1/2 in. npt(m), 2spdt, ip66, pressure switch, 0.3-1.6 kg/cm2, tantalum/monel or better diaphragm seal, chlorine service, body-ss316lor suitable,die cast aluminium or better enclosure, repeatability : +/-1 percent , process connection : 1/2 in. npt(m), 2spdt, ip66, vacuum gauge, (-760 to 0) mm hg, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body:ss316l or suitable, dial:150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m), ip65, pressure gauge 0-6 kg/cmsq, pressure gauge 0-10 kg/cm2, pressure gauge range 0-16 kg/cm2 size 100 mm, over travel limit switch (otls), make: electromag methods, model:- elotc/2no2nc, amps: 40 / 10, voltage: 500 vac, c/s: 50, ag make heavy duty limit switch type : hls/ii. contacts : 2 no + 2 nc rating : 25 amps @ 415 v.ac enclosure : die casting aluminum (lm-6) gasket : nitrile rubber gasket reset : auto reset type, digital pressure gauge: range: 0 to 100 kg/cm2, zero speed switch, make: protocontrol instruments pvt. ltd, model: esm b2, sensing range: 15-17mm, supply: 220vac , range: 10 -100 rpm, wire: 2 wire, ppr: 4, cable length: 2 meter (mininum), sr no: 15j252., inductive proximity switch, sensing distance: 25mm, supply: 230v ac, dimension: 50mm x 110mm., zss controller

Central Government/Public Sector

CTN :45603059

06 Jul, 2026 NA

Mumbai - Maharashtra

Tender For set of main gear assembly for irs electric point machine 220 mmthrow as per specification no. irs-s:24-2025 rev-3.details as per annexure- ii. only valid iso-9001 (qms) certified firms to quote. size 3 inch sample piece of the original material of drive rod, lock rod, threaded rod, detector rod, main gear, lock pawl, shaft rack pinion, driving pinion, bush, r.h. helical spring, cover, top/bottom, bracket,ring& metallic liner to be provided for testing as per is:1875, is:2062,is:1865,is:1875,is:3980,is:4454 & is:210.warranty period: upto 30 months from the date of supply.(shop no.06) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45575576

06 Jul, 2026 NA

Mumbai - Maharashtra

Tender For detector rod far end for cgl/irs 52 kgs one piece rodding with solid jaw drg no- s&t/by/ f-338/a , material should be as per drg.with m.s. square head pin as per drg no- s&t/by/f-353a. material should confirm irs s5 & s10.party to submit oem / autherization with warranty. sample to be got approved before bulk supply ( for diamension purpose only).(shop no.03) [ warranty period: 30 months after the date of delivery ] ]

CTN :45567249

13 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of integrated smoke and heat detector tester with smoke chamber cleaning features ,containing following accessories -sensor unit-1, battery rod-1, injector-1, mist liquid -1,charger-1, connect rod-4. specifications as per annexure attached. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45547055

01 Jul, 2026 NA

Nagpur - Maharashtra

Tender For supply of electric point machine rotary locking type, high thrust 220 mm throw,ac immunity 160 v ac,non trailable to operate on 110v dc completed with lock detector slides, cable termination box as per rdso specification no.irs: s: 24-2025 rev 3.0 or latest amendment. 1.the point machine and ground connections are as per drawing no. mentioned in rdso's letter no. sts/e/pm/220 mm vol-1 dated 23.5 2019. ground connection shall be as per rdso drawing no. rdso/s-3454 alt.-a consisting of (i) 1 in 8.5 turn outs bg 60 kg on prestressed concrete sleepers fitted with irs point machine ( 220 mm throw) for independent switch locking and clamp point lock (160 mm throw of point) with p bracket as per drawing no. rdso/s- 3454 alt.-a (ii) facing point bg switch extension bracket/insulation plate left hand and right hand as per drawing no. rdso/s-3591-3592-3593 (iii) facing point bg detector rod far end/near end as per drawing no.rdso/s-3594-95 (iv) facing point bg lock rod far end /near end as per drawing no. rdso/s-3596-97 (v) detector rod lug and lock rod lug as per drawing no. rdso/s-3598 (vi) special ms plate for s&t fittings on psc sleepers as per drawing no. rdso/t-3901 (vii) clamp type lock 60kg (tws)-bg-bolt special head as per drawing no. rdso/s/3599 alteration if any are applicable. one set of tools in a suitable tool box shall be supplied along with every 5 nos. of point machines consisting of (i) m6/m8/m18/m22/m20 box spanners (ii) m10/12 spanners (iii) adjustable wrench (iv) screw driver 300 mm long. 1:8.5 turnout. [ warranty period: 30 months after the date of delivery ] ]

Microplate Detection Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector