Latest mild steel tube Tenders | Government mild steel tube Tenders

Central Government/Public Sector

CTN :45551054

29 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of galvanised mild steel tubes electrical resistance welded (erw)/high frequency induction welded (hfiw)/hot finished welded (hfw) conforming to is.1239 (part 1) /1990 (fifth rev) with amdt. no. 1 to 5. screwed at both ends as per is.554/1985 socketed at one end and other end protected with plastic thread protector.the socket conforming to is.1239(part-ii)/1992 (fourth rev) with amdt no.1 in random length of 4 to 7 mtrs. g.i pipe shall be duly isi marked as per statutory requirement nominal bore dia is 40mm medium grade. is 1239-68 part i [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45111567

19 Jun, 2026 NA

Srinagar - Jammu And Kashmir

Tender For corrigendum : “rate contract for supply of isi marked galvanized mild steel tubes of nominal bore 15mm, 20mm, 25mm, 40mm, 50mm, 65mm, 80mm and 100mm nb light class, & 100mm, 125mm and 150mm nb medium class conforming to is: 1239(part-i) 2004 sixth revision read with up-to-date amendments in random length ranging from ‘4.00 mts to 7.00 mts’ screwed on both ends as per is: 554/1990, with socket at one end conforming to is: 1239 (pt.11/1992-4th revision) read with latest amendment & other end protected with plastic protector under various programmes of jal shakti phe in kashmir province of ut of jammu & kashmir”.

State Government

CTN :45478262

13 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate(including gst and cess) for implementation of different scheme under mgnrega at khoyrasole dev. block and 10 nos of gp under khoyrasole dev. block for the year 2026-27 - mgnrega materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal te

Central Government/Public Sector

CTN :45472999

10 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of galvanised mild steel tubes electrical resistance welded(erw)/high frequency induction welded (hfiw)/hot finished welded(hfw) conforming to is.1239(part-1)/1990 (fifth rev) with amdt no 1 to 5 screwed at both ends as per is.554/1985 socketed at one end and other end protected with plastic thread protector.the socket conforming to is.1239(part-ii)/1992 (fourth rev) with amdt no.1 in random length of 4 to 7 mtrs. g.i pipeshall be duly isi marked as per statutory requirement nominal bore dia is 40mm medium grade. is 1239-68 part i. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45462091

29 Jun, 2026 NA

Godhra - Gujarat

Tender For supplying and stacking various type of building, road &other construction materials, at various places of taluka panchayat,godhra under mgnrega (annual unit rate) - cement isi mark 53grade, etc.opc, white cement, tmt bars fe-415, hysd steel bars, r.c.c. np3 pipe 900m.m. dia, r.c.c. np3 pipe 600m.m. dia, r.c.c. np3 pipe 300m.m. dia, crushed stone aggrigate for hard qulity 10 to 20 mm, crushed stone aggrigate for hard qulity 40 mm, crushed stone aggrigate for hard qulity 40 to 63 mm, hand broken metal 25-90m.m., rubble local, coarse sand, quarry dust, bricks- convention size, binding wire, kota stone 25m.m. thick, glaze tiles, vitrified granite tiles 8 mm to 10 mm tick 24 x 24 size, pvc water tank 1000 ltr, galvenise iron sheet 0.8 tick class 3, iron angle and pipe, pevar block m 200 grade 60 mm tick, hire charge for mixer machine rent, hire charge for water tanker rent 6kl capacity, murram (binding material), road roller hire charges 8 tone, wash basin 550*400m.m., colour distamper primer, marble slab/platform 25m.m. thick double polished, galvanised mild steel tube medium grade 20m.m., galvanised mild steel tube medium grade 32m.m., galvanised mild steel tube medium grade 40m.m., indian type wc pan size 580x 400m.m., cast iron nahni trap, flush cock, chromium plated brass /bib tap 15m.m., sw gully trap 100 x 100 mm size, kitchen sink 600m.m.*450m.m.*150m.m. (steel), pvc pipe 110m.m.dia 6kg per/sqm, hire charge for vibrator surface, hire charge for vibrator needle, asbestos.cement sheet, centaring(scalffoding), iron door, iron window, oil paint, uncost material carting trip, p or s trap 100 m.m. dia, electrict light fitting material

Central Government / Public Sector

CTN :45479524

19 Jun, 2026 NA

Hyderabad-T - Telangana

Tender For supply of galvanized mild steel tubes electrical resistance welded (erw)/high frequency induction welded (hfiw)/hot finished welded (hfw) conforming to is: 1239/part-1/1990. (fifth rev) with amdt no 1 to 5 screwed at both ends as per is: 554/1985 socketed at one end other end protected with plastic thread protector. the socket conforming to is: 1239/part-ii /1992(fourth rev) with amdt. no.1 in random length of 4 to 7 mtrs g.i.pipe shall be duly isi marked as per statutory requirement nominal bore dia 25 mm medium grade [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45454194

16 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of galvanised mild steel tubes electrical resistance welded(erw)/high frequency induction welded (hfiw)/hot finished welded(hfw) conforming to is.1239/part-1/1990(fifth rev) with amdt no 1 to 5 screwed at both ends as per is.554/1985 socketed at one end and other end protected with plastic thread protector. the socket conforming tois.1239/part-ii/1992 (fourth rev) with amdt no.1 in random length of 4 to 7 mtrs .g.i pipe shall be duly isi marked as per statutory requirement nominal bore dia 25mm medium grade. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45416190

11 Jun, 2026 30.00 Lacs

Palakkad - Kerala

Tender For ananganadi grama panchayath ,vendor selection for supply of various mterials for mgnregs - quarry waste, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, fine sand (zone iv), coarse sand (zone iii), gravel 5mm to 10mm, stone for masonry work, portland cement, m.s. tube 40 mm dia, mild steel tubes hot finished welded type, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, mild steel sheets with bolts and nuts to rest on pintels, iron pintels including weldded pin, mild steel sheets for tanks, mild steel hooks, mild steel plate, mild steel tubes electric resistant or induction butt welded, welding by electric plant, wire nails, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, flats up to 10 mm in thickness, galvanised wire mesh of average width of aperture 1.4 and nominal dia.of wire 0.63 mm, g.i trafford profile sheet 0.35mm thick, precoated aluminium traffored sheet 0.450 mm thick, structural steel such as tees,angles,channels and rs joists, stainless steel screws 50 mm, red oxide zinc chromate primer, precoated galvanised steel plain ridges, stainless steel (grade - 304) hollow section round/square tubes, stainless steel bolts /square bar and plates, g.i pipe 40mm dia, gi plain washer thick, twisted steel/deformed bars, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charge of 10 hp engine and pump set - materials, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), adjustable span eso+si (2.35-3.40), second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, solid blocks of size 30x20x20cm, solid blocks of size 30x20x15cm, hollow blok of size 40x20x10cm, interlocking c.c. paver block (80 mm thick, m-30), pvc vent cowl 63 mm dia, pvc vent cowl 110 mm dia, brass bib-cock-15 mm dia, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc pipe 110 mm outer dia 6kgf/cm2, pvc pipe 25 mm outer dia . 12 kgf/cm2, pvc pipe 32 mm outer dia. 10kgf/cm2, pvc elbow 63 mm dia, pvc 45 degree elbow 63 mm dia, pvc door elbow 63 mm dia, pvc bend 63 mm dia, pvc tee 63x63x63 mm dia, pvc socket/coupling 63 mm dia, pvc elbow 110 mm dia, pvc 45 degree elbow 110 mm dia, pvc door elbow 110 mm dia, pvc bend 110 mm dia, pvc tee 110x110x110mm dia, pvc socket/coupling 110 mm dia, pvc pipe 40 mm outer dia. 10kgf/cm2, pvc pipe 20 mm outer dia 10 kfg/cm2, pvc pipe 63 mm outer dia . 4kgf/cm2, pvc pipe 32 mm outer dia 6kgf/cm2, pvc pipe 40 mm outer dia. 6kgf/cm2, pvc pipe 75 mm outer dia 6kgf/cm2, pvc pipe 110 mm outer dia. 4kgf/cm2, pvc pipe 160 mm outer dia. 4kgf/cm2, pvc elbow 75 mm dia, pvc 45 degree elbow 75 mm dia, pvc socket/coupling 75 mm dia, pvc reducer 63x50 mm dia, pvc vent cowl 75 mm dia, vitreous china orrisa type w.c. pan size 580 mm, brass stop-cock 15 mm dia, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type water closet, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, c.i. bracket for wash basin and sinks, polyethylene water storage tank with cove

CTN :45375496

13 Jun, 2026 NA

Kozhikode - Kerala

Tender For supply of materials for mahathma gandhi nregs material works - work materials, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, portland cement, royalty for good earth, coarse sand (zone iii), fine sand (zone iv), twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots,10 nos, galvanised steel j or l hooks 8 mm dia,10 nos, g.i limpet washer,50 nos, bitumen washer,50 nos, wire nails, mild steel tubes hot finished welded type, red oxide zinc chromate primer, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, gi trafford profile sheet 0.35mm thick, galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, solid blocks of size 40x20x15cm, solid blocks of size 40x20x10cm, laterate stone of size 40x20x15cm, quarry waste, pvc pipe 63 mm outer dia. 4 kgf/cm2, pvc bend 63 mm dia, pvc elbow 63 mm dia

State Government

CTN :45341930

05 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate including gst and cess for implementation of different scheme under mgnrega at khoyrasole dev. block and 10 nos of gp under khoyrasole dev. block for the year 2026 27 - mgnrega materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee

Mild Steel Tube Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors